ABSTRACT
Objectives: The addition of tiny rows of holes in the tipping paper (filter ventilation) of cigarettes allows air to mix with the smoke, which can change risk perceptions. In this study, we examine smokers' knowledge and beliefs about filter ventilation. Methods: Web-based panel surveys conducted in 2016 and 2017 of current adult cigarette smokers (N = 2355) provided data on awareness and understanding of filter vents in their cigarettes, whether they believed blocking the holes would change the taste of their cigarettes, and their perceptions about their future risk of being diagnosed with lung cancer. The most commonly used cigarette brands reported by participants also were characterized on the presence and level of ventilation holes. Results: Approximately 40% of participants (mostly younger and male) reported awareness of the filter ventilation in their cigarettes. Only 30% of the participants were both aware of and understood the function of filter ventilation; they also were significantly more likely to worry about developing lung cancer. Conclusion: Although misleading descriptors associated with filter ventilation are prohibited, most smokers still smoked cigarettes with filter vents, and many are unaware and misunderstand the potential risks of filter ventilation.
ABSTRACT
OBJECTIVES: The current study examines physical cigarette design characteristics and tobacco metal content of cigarettes obtained from 5 countries to determine how these properties vary for cigarette brands, both within and across countries with different dominant manufacturers. METHODS: Cigarette packs were collected from International Tobacco Control Policy Evaluation Survey (ITC) participants in the U.S., the U.K., Mauritius, Mexico, and Thailand. Cigarettes were assessed for physical and design properties (eg, ventilation, pressure drop, rod density, weight) by published methods, and for metal content (As, Cd, Ni, Pb) by X-ray fluorescence spectrometry. RESULTS: Significant differences in cigarette design and toxic metal concentrations were observed between countries and between manufacturers within countries. Filter ventilation, which is strongly predictive of machine-measured tar and nicotine levels, varied most widely across countries. Ni and Cd were highest in Thailand (2.23ug/g and 1.64ug/g, respectively); As was highest in Mexico (0.29ug/g) and Pb was highest in the U.K. (0.43 ug/g). CONCLUSIONS: Parties to the FCTC should consider the adoption of uniform product standards related to cigarette design, emissions, and tobacco content that would reduce population health risks.
ABSTRACT
INTRODUCTION: While U.S. cigarette consumption has declined, cigar use has steadily increased, for reasons including price compared to cigarettes and the availability of filtered varieties resembling cigarettes, and flavors that have been banned in cigarettes (excluding menthol). Little published data exists on the design characteristics of such cigars. METHODS: A variety of filtered cigar brands were tested for design characteristics such as whole cigar weight, ventilation, and per-cigar tobacco weight. Cigar sticks were then sent to the University of St. Andrews for metal concentration testing of As, Pb, Cr, Ni, and Cd. RESULTS: Large and small cigars were statistically different between cigar weight (p ≤ .001), per-cigar tobacco weight (p = .001), rod diameter (p = .006), and filter diameter (p = .012). The differences in mean ventilation (overall mean = 19.6%, min. = 0.84%, max. = 57.6%) across filtered cigar brands were found to be statistically significant (p = .031), and can be compared to the ventilation of the average of 2013 U.S. Marlboro Red, Gold, and Silver packs at 29% ventilation. There were no significant differences for metal concentrations between cigar types (p = .650), with Pb and As levels being similar to U.S. 2009 cigarette concentrations, Cd cigar levels being slightly higher, and Cr and Ni levels much lower than cigarette levels. CONCLUSIONS: With cigar use rising, and filtered cigars displaying substantial similarities to filtered cigarettes, more research on product characteristics is warranted. Future plans include testing tobacco alkaloid and more observation of cigar weight for tax bracket purposes.
Subject(s)
Metals, Heavy/chemistry , Smoking , Tobacco Products/analysis , Commerce , Humans , Tobacco Products/economics , United StatesABSTRACT
BACKGROUND: China is home to the greatest number of smokers as well as the greatest number of smoking-related deaths. An active and growing market of cigarettes marketed as 'light' or 'low tar' may keep health-concerned smokers from quitting, wrongly believing that such brands are less harmful. OBJECTIVE: This study sought to observe changes in cigarette design characteristics and reported tar, nicotine and carbon monoxide (TNCO) levels in a sample of cigarette brands obtained in seven Chinese cities from 2009 to 2012. METHODS: Cigarettes were purchased and shipped to Roswell Park Cancer Institute, where 91 pairs of packs were selected for physical cigarette design characteristic testing and recording of TNCO values. Data analysis was conducted using SPSS, and was initially characterised using descriptive statistics, correlations and generalised estimating equations to observe changes in brand varieties over time. FINDINGS: Reported TNCO values on packs saw mean tar, nicotine and CO levels decrease from 2009 to 2012 by 7.9%, 4.5% and 6.0%, respectively. Ventilation was the only cigarette design feature that significantly changed over time (p<0.001), with an increase of 31.7%. Significant predictors of tar and CO yield overall were ventilation and per-cigarette tobacco weight, while for nicotine tobacco moisture was also an independent predictor of yield. CONCLUSIONS: The use of ventilation to decrease TNCO emissions is misleading smokers to believe that they are smoking a 'light/low' tar cigarette that is healthier, and is potentially forestalling the quitting behaviours that would begin to reduce the health burden of tobacco in China, and so should be prohibited.
Subject(s)
Carbon Monoxide/analysis , Nicotine/analysis , Tars/analysis , Tobacco Products/analysis , China , Commerce/trends , Humans , Product Labeling , Nicotiana/chemistryABSTRACT
BACKGROUND: Metals of primary health concern can accumulate in the tobacco plant and contribute to smokers' exposures to carcinogens, a significant cause of the millions of smoking-related deaths in China each year. These exposures are due to the smoker's addiction to nicotine. OBJECTIVE: This study sought to explore toxic heavy metal and nicotine concentrations in the tobacco of Chinese cigarette brands purchased in 2009 and 2012, as well as its regional variation. METHODS: Cigarette packs for this study were purchased from seven Chinese cities in 2009 and 2012, and 91 pairs of cigarettes were matched based on UPC for comparison. Ten cigarette sticks were randomly selected from each pack and tested using polarised energy dispersive X-ray fluorescence (XRF) for arsenic (As), cadmium (Cd), chromium (Cr), nickel (Ni) and lead (Pb) concentrations. Nicotine analysis was conducted following Coresta's Recommended Method N°62. Data analysis was conducted using SPSS, encompassing descriptive statistics, correlations and generalised estimating equations to observe changes in brand varieties overtime. FINDINGS: On average, from 2009 to 2012, As, Cd, Cr and Pb concentrations have decreased in Chinese tobacco. Of the seven cities where the cigarette brands were purchased, only four cities showed significant differences of the selected metals from 2009 to 2012. However, there was no significant change in the tobacco nicotine content from 2009 to 2012. CONCLUSIONS: Tobacco in Chinese cigarettes purchased in seven geographically disbursed cities contains consistently high levels of metals, including carcinogens like Cd. One source may be the improper use of fertilisers. These numbers should be monitored more carefully and regulated by health officials.
Subject(s)
Carcinogens/analysis , Metals, Heavy/analysis , Nicotine/analysis , Tobacco Products/analysis , China , Commerce/trends , Humans , Spectrometry, X-Ray Emission/methodsABSTRACT
INTRODUCTION: Many governments around the world have banned the use of misleading cigarette descriptors such as "light" and "mild" because the cigarettes so labeled were found not to reduce smokers' health risks. However, underlying cigarette design features, which are retained in many brands, likely contribute to ongoing belief that these cigarettes are less harmful by producing perceptions of lightness/smoothness through lighter taste and reduced harshness and irritation. METHODS: Participants (N = 320) were recruited from the International Tobacco Control U.S. Survey conducted in 2009 and 2010, when they answered questions about smoking behavior, attitudes and beliefs about tobacco products, and key mediators and moderators of tobacco use behaviors. Participants also submitted an unopened pack of their usual brand of cigarettes for analysis using established methods. RESULTS: Own-brand filter ventilation level (M 29%, range 0%-71%) was consistently associated with perceived lightness (p < .001) and smoothness (p = .005) of own brand. Those whose brand bore a light/mild label (55% of participants) were more likely to report their cigarettes were lighter [71.9% vs. 41.9%; χ(2)(2) = 38.1, p < .001] and smoother than other brands [75.5% vs. 68.7%; χ(2)(2) = 7.8, p = .020]. CONCLUSION: Product design features, particularly filter ventilation, influence smokers' beliefs about product attributes such as lightness and smoothness, independent of package labels. Regulation of cigarette design features such as filter ventilation should be considered as a complement to removal of misleading terms in order to reduce smokers' misperceptions regarding product risks.
Subject(s)
Product Labeling , Smoking/psychology , Tobacco Products/classification , Adult , Culture , Data Collection , Female , Filtration , Humans , Male , Middle Aged , Perception , Product Packaging , Risk , Smoking/adverse effects , Taste , United States , Young AdultABSTRACT
Smoking-related diseases can be attributed to the inhalation of many different toxins, including heavy metals, which have a host of detrimental health effects. The current study reports the levels of arsenic (As), cadmium (Cd), chromium (Cr), nickel (Ni), and lead (Pb) in cigarettes obtained from adult smokers participating in the 2009 wave of the ITC United States Survey (N = 320). The mean As, Cd, Cr, Ni, and Pb levels were 0.17, 0.86, 2.35, 2.21, and 0.44 µg/g, respectively. There were some differences in metal concentrations of cigarette brands produced by different manufacturers, suggesting differences in the source of tobaccos used by different companies. For Ni, there were significant pairwise differences between Philip Morris U.S. (PMUSA) and R.J. Reynolds (RJR) brands (PMUSA higher; p < 0.001), PMUSA and other manufacturer (OM) brands (PMUSA higher; p < 0.001), and RJR and OM brands (RJR higher; p = 0.006). For Cr, RJR brands had higher levels than did OM brands (p = 0.02). Levels of As, Cd, and Pb did not differ significantly across manufacturer groups (p > 0.10). Because of the variety of toxic heavy metals in cigarette tobacco, and their numerous negative health effects, metal content in cigarette tobacco should be reduced.
Subject(s)
Arsenic/analysis , Metals, Heavy/analysis , Tobacco Products/analysis , Tobacco Products/toxicity , Humans , Regression Analysis , United StatesABSTRACT
Previous studies have shown that country income grouping is correlated with cigarette engineering. Cigarettes (N = 111 brands) were purchased during 2008-2010 from 11 low-, middle-, and high-income countries to assess physical dimensions and an array of cigarette design features. Mean ventilation varied significantly across low- (7.5%), middle- (15.3%), and high-income (26.2%) countries (P ≤ 0.001). Differences across income groups were also seen in cigarette length (P = 0.001), length of the tipping paper (P = 0.01), filter weight (P = 0.017), number of vent rows (P = 0.003), per-cigarette tobacco weight (P = 0.04), and paper porosity (P = 0.008). Stepwise linear regression showed ventilation and tobacco length as major predictors of ISO tar yields in low-income countries (P = 0.909, 0.047), while tipping paper (P < 0.001), filter length (P < 0.001), number of vent rows (P = 0.014), and per-cigarette weight (P = 0.015) were predictors of tar yields in middle-income countries. Ventilation (P < 0.001), number of vent rows (P = 0.009), per-cigarette weight (P < 0.001), and filter diameter (P = 0.004) predicted tar yields in high-income countries. Health officials must be cognizant of cigarette design issues to provide effective regulation of tobacco products.