Alkali-Doped Nanopaper Membranes Applied as a Gate Dielectric in FETs and Logic Gates with an Enhanced Dynamic Response.

The market for flexible, hybrid, and printed electronic systems, which can appear in everything from sensors and wearables to displays and lighting, is still uncertain. What is clear is that these systems are appearing every day, enabling devices and systems that can, in the near future, be crumpled up and tucked in our pockets. Within this context, cellulose-based modified nanopapers were developed to serve both as a physical support and a gate dielectric layer in field-effect transistors (FETs) that are fully recyclable. It was found that the impregnation of those nanopapers with sodium (Na+) ions allows for low operating voltage FETs (<3 V), with mobility above 10 cm2 V-1 s-1, current modulation surpassing 105, and an improved dynamic response. Thus, it was possible to implement those transistors into simple circuits such as inverters, reaching a clear discrimination between logic states. Besides the overall improvement in electrical performance, these devices have shown to be an interesting alternative for reliable, sustainable, and flexible electronics, maintaining proper operation even under stress conditions.

Carbon-Yarn-Based Supercapacitors with In Situ Regenerated Cellulose Hydrogel for Sustainable Wearable Electronics.

Developing sustainable options for energy storage in textiles is needed to power future wearable "Internet of Things" (IoT) electronics. This process must consider disruptive alternatives that address questions of sustainability, reuse, repair, or even a second life application. Herein, we pair stretch-broken carbon fiber yarns (SBCFYs), as current collectors, and an in situ regenerated cellulose-based ionic hydrogel (RCIH), as an electrolyte, to fabricate 1D fiber-shaped supercapacitors (FSCs). The areal specific capacitance reaches 433.02 µF·cm-2 at 5 µA·cm-2, while the specific energy density is 1.73 × 10-2 µWh·cm-2. The maximum achieved specific power density is 5.33 × 10-1 mW·cm-2 at 1 mA·cm-2. The 1D FSCs possess a long-life cycle and 92% capacitance retention after 10 000 consecutive voltammetry cycles, higher than similar ones using the reference PVA/H3PO4 gel electrolyte. Additionally, the feasibility and reproducibility of the produced devices were demonstrated by connecting three devices in series and parallel, showing a small variation of the current density in flat and bent positions. An environmentally responsible approach was implemented by recovering the active materials from the 1D FSCs and reusing or recycling them without compromising the electrochemical performance, thus ensuring a circular economy path.

Sustainable Fully Printed UV Sensors on Cork Using Zinc Oxide/Ethylcellulose Inks.

Low-cost and large-scale production techniques for flexible electronics have evolved greatly in recent years, having great impact in applications such as wearable technology and the internet of things. In this work, we demonstrate fully screen-printed UV photodetectors, successfully fabricated at a low temperature on a cork substrate, using as the active layer a mixture of zinc oxide nanoparticles and ethylcellulose. The photoresponse under irradiation with a UV lamp with peak emission at 302 nm exhibited a quasi-quadratic behavior directly proportional to the applied voltage, with a photocurrent of about 5.5 and 20 µA when applying 1.5 V and 5 V, respectively. The dark current stayed below 150 nA, while the rise and falling times were, respectively, below 5 and 2 s for both applied voltages. The performance was stable over continuous operation and showed a degradation of only 9% after 100 bending cycles in a 45 mm radius test cylinder. These are promising results regarding the use of this type of sensor in wearable applications such as cork hats, bracelets, or bags.

Fully Printed Zinc Oxide Electrolyte-Gated Transistors on Paper.

Fully printed and flexible inorganic electrolyte gated transistors (EGTs) on paper with a channel layer based on an interconnected zinc oxide (ZnO) nanoparticle matrix are reported in this work. The required rheological properties and good layer formation after printing are obtained using an eco-friendly binder such as ethyl cellulose (EC) to disperse the ZnO nanoparticles. Fully printed devices on glass substrates using a composite solid polymer electrolyte as gate dielectric exhibit saturation mobility above 5 cm² V-1 s-1 after annealing at 350 °C. Proper optimization of the nanoparticle content in the ink allows for the formation of a ZnO channel layer at a maximum annealing temperature of 150 °C, compatible with paper substrates. These devices show low operation voltages, with a subthreshold slope of 0.21 V dec-1, a turn on voltage of 1.90 V, a saturation mobility of 0.07 cm² V-1 s-1 and an Ion/Ioff ratio of more than three orders of magnitude.