Innovative Strategy for Developing PEDOT Composite Scaffold for Reversible Oxygen Reduction Reaction.

Metal-air batteries are an emerging technology with great potential to satisfy the demand for energy in high-consumption applications. However, this technology is still in an early stage, facing significant challenges such as a low cycle life that currently limits its practical use. Poly(3,4-ethylenedioxythiophene) (PEDOT) conducting polymer has already demonstrated its efficiency as catalyst for oxygen reduction reaction (ORR) discharge as an alternative to traditional expensive and nonsustainable metal catalysts. Apart from that, in most electrochemical processes, three phenomena are needed: redox activity and electronic and ionic conduction. Material morphology is important to maximize the contact area and optimize the 3 mechanisms to obtain high-performance devices. In this work, porous scaffolds of PEDOT-organic ionic plastic crystal (OIPC) are prepared through vapor phase polymerization to be used as porous self-standing cathodes. The scaffolds, based on abundant elements, showed good thermal stability (200 °C), with potential ORR reversible electrocatalytic activity: 60% of Coulombic efficiency in aqueous medium after 200 cycles.

Current Trends and Perspectives of Polymers in Batteries.

This Perspective aims to present the current status and future opportunities for polymer science in battery technologies. Polymers play a crucial role in improving the performance of the ubiquitous lithium ion battery. But they will be even more important for the development of sustainable and versatile post-lithium battery technologies, in particular solid-state batteries. In this article, we identify the trends in the design and development of polymers for battery applications including binders for electrodes, porous separators, solid electrolytes, or redox-active electrode materials. These trends will be illustrated using a selection of recent polymer developments including new ionic polymers, biobased polymers, self-healing polymers, mixed-ionic electronic conducting polymers, inorganic-polymer composites, or redox polymers to give some examples. Finally, the future needs, opportunities, and directions of the field will be highlighted.

Eutectogels as a Semisolid Electrolyte for Organic Electrochemical Transistors.

Organic electrochemical transistors (OECTs) are signal transducers offering high amplification, which makes them particularly advantageous for detecting weak biological signals. While OECTs typically operate with aqueous electrolytes, those employing solid-like gels as the dielectric layer can be excellent candidates for constructing wearable electrophysiology probes. Despite their potential, the impact of the gel electrolyte type and composition on the operation of the OECT and the associated device design considerations for optimal performance with a chosen electrolyte have remained ambiguous. In this work, we investigate the influence of three types of gel electrolytes-hydrogels, eutectogels, and iongels, each with varying compositions on the performance of OECTs. Our findings highlight the superiority of the eutectogel electrolyte, which comprises poly(glycerol 1,3-diglycerolate diacrylate) as the polymer matrix and choline chloride in combination with 1,3-propanediol deep eutectic solvent as the ionic component. This eutectogel electrolyte outperforms hydrogel and iongel counterparts of equivalent dimensions, yielding the most favorable transient and steady-state performance for both p-type depletion and p-type/n-type enhancement mode transistors gated with silver/silver chloride (Ag/AgCl). Furthermore, the eutectogel-integrated enhancement mode OECTs exhibit exceptional operational stability, reflected in the absence of signal-to-noise ratio (SNR) variation in the simulated electrocardiogram (ECG) recordings conducted continuously over a period of 5 h, as well as daily measurements spanning 30 days. Eutectogel-based OECTs also exhibit higher ECG signal amplitudes and SNR than their counterparts, utilizing the commercially available hydrogel, which is the most common electrolyte for cutaneous electrodes. These findings underscore the potential of eutectogels as a semisolid electrolyte for OECTs, particularly in applications demanding robust and prolonged physiological signal monitoring.

Biobased Acrylic Latexes/Sodium Carboxymethyl Cellulose Aqueous Binders for Lithium-Ion NMC 811 Cathodes.

The increasing demands for sustainable energy storage technologies have prompted extensive research in the development of eco-friendly materials for lithium-ion batteries (LIBs). This research article presents the design of biobased latexes, which are fluorine-free and rely on renewable resources, based on isobornyl methacrylate (IBOMA) and 2-octyl acrylate (2OA) to be used as binders in batteries. Three different compositions of latexes were investigated, varying the ratio of IBOMA and 2OA: (1) Poly2OA homopolymer, (2) Poly(2OA0,6-co-IBOMA0,4) random copolymer, and (3) PolyIBOMA homopolymer. The combination of the two monomers provided a balance between rigidity from the hard monomer (IBOMA) and flexibility from the soft one (2OA). The study evaluated the performance of the biobased latexes using sodium carboxymethyl cellulose (CMC) as a thickener and cobinder by fabricating LiNi0.8Mn0.1Co0.1O2 (NMC 811) cathodes. Also, to compare with the state of the art, organic processed PVDF electrodes were prepared. Among aqueous slurries, rheological analysis showed that the CMC + Poly(2OA0,6-co-IBOMA0,4) binder system resulted in the most stable and well-dispersed slurries. Also, the electrodes prepared with this latex demonstrated enhanced adhesion (210 ± 9 N m-1) and reduced cracks compared to other aqueous compositions. Electrochemical characterization revealed that the aqueous processed cathodes using the CMC + Poly(2OA0,6-co-IBOMA0,4) biobased latex displayed higher specific capacities than the control with no latex at high C-rates (100.3 ± 2.1 vs 64.5 ± 0.8 mAh g-1 at 5C) and increased capacity retention after 90 cycles at 0.5C (84% vs 81% for CMC with no latex). Overall, the findings of this study suggest that biobased latexes, specifically the CMC + Poly(2OA0,6-co-IBOMA0,4) composition, are promising as environmentally friendly binders for NMC 811 cathodes, contributing to the broader goal of achieving sustainable energy storage systems.

Fast Visible-Light 3D Printing of Conductive PEDOT:PSS Hydrogels.

Functional inks for light-based 3D printing are actively being searched for being able to exploit all the potentialities of additive manufacturing. Herein, a fast visible-light photopolymerization process is showed of conductive PEDOT:PSS hydrogels. For this purpose, a new Type II photoinitiator system (PIS) based on riboflavin (Rf), triethanolamine (TEA), and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is investigated for the visible light photopolymerization of acrylic monomers. PEDOT:PSS has a dual role by accelerating the photoinitiation process and providing conductivity to the obtained hydrogels. Using this PIS, full monomer conversion is achieved in less than 2 min using visible light. First, the PIS mechanism is studied, proposing that electron transfer between the triplet excited state of the dye (3 Rf*) and the amine (TEA) is catalyzed by PEDOT:PSS. Second, a series of poly(2-hydroxyethyl acrylate)/PEDOT:PSS hydrogels with different compositions are obtained by photopolymerization. The presence of PEDOT:PSS negatively influences the swelling properties of hydrogels, but significantly increases its mechanical modulus and electrical properties. The new PIS is also tested for 3D printing in a commercially available Digital Light Processing (DLP) 3D printer (405 nm wavelength), obtaining high resolution and 500 µm hole size conductive scaffolds.

Engineering Proteins for PEDOT Dispersions: A New Horizon for Highly Mixed Ionic-Electronic Biocompatible Conducting Materials.

Poly (3,4-ethylenedioxythiophene) (PEDOT) doped with polystyrene sulfonate (PSS) is the most used conducting polymer from energy to biomedical applications. Despite its exceptional properties, there is a need for developing new materials that can improve some of its inherent limitations, e.g., biocompatibility. In this context, doping PEDOT is propose with a robust recombinant protein with tunable properties, the consensus tetratricopeptide repeated protein (CTPR). The doping consists of an oxidative polymerization, where the PEDOT chains are stabilized by the negative charges of the CTPR protein. CTPR proteins are evaluated with three different lengths (3, 10, and 20 identical CTPR units) and optimized varied synthetic conditions. These findings revealed higher doping rate and oxidized state of the PEDOT chains when doped with the smallest scaffold (CTPR3). These PEDOT:CTPR hybrids possess ionic and electronic conductivity. Notably, PEDOT:CTPR3 displayed an electronic conductivity of 0.016 S cm-1, higher than any other reported protein-doped PEDOT. This result places PEDOT:CTPR3 at the level of PEDOT-biopolymer hybrids, and brings it closer in performance to PEDOT:PSS gold standard. Furthermore, PEDOT:CTPR3 dispersion is successfully optimized for inkjet printing, preserving its electroactivity properties after printing. This approach opens the door to the use of these novel hybrids for bioelectronics.

Carrageenans as Sustainable Water-Processable Binders for High-Voltage NMC811 Cathodes.

Poly(vinylidene fluoride) (PVDF) is the most common binder for cathode electrodes in lithium-ion batteries. However, PVDF is a fluorinated compound and requires toxic N-methyl-2-pyrrolidone (NMP) as a solvent during the slurry preparation, making the electrode fabrication process environmentally unfriendly. In this study, we propose the use of carrageenan biopolymers as a sustainable source of water-processable binders for high-voltage NMC811 cathodes. Three types of carrageenan (Carr) biopolymers were investigated, with one, two, or three sulfonate groups (SO3-), namely, kappa, iota, and lambda carrageenans, respectively. In addition to the nature of carrageenans, this article also reports the optimization of the cathode formulations, which were prepared by using between 5 wt % of the binder to a lower amount of 2 wt %. Processing of the aqueous slurries and the nature of the binder, in terms of the morphology and electrochemical performance of the electrodes, were also investigated. The Carr binder with 3SO3- groups (3SO3-Carr) exhibited the highest discharge capacities, delivering 133.1 mAh g-1 at 3C and 105.0 mAh g-1 at 5C, which was similar to the organic-based PVDF electrode (136.1 and 108.7 mAh g-1, respectively). Furthermore, 3SO3-Carr reached an outstanding capacity retention of 91% after 90 cycles at 0.5C, which was attributed to a homogeneous NMC811 and a conductive carbon particle dispersion, superior adhesion strength to the current collector (17.3 ± 0.7 N m-1 vs 0.3 ± 0.1 N m-1 for PVDF), and reduced charge-transfer resistance. Postmortem analysis unveiled good preservation of the NMC811 particles, while the 1SO3-Carr and 2SO3-Carr electrodes showed damaged morphologies.

Direct ink writing of PEDOT eutectogels as substrate-free dry electrodes for electromyography.

Deep Eutectic Solvents (DES) are a new class of ionic conductive compounds attracting significant attention as greener alternatives to costly ionic liquids. Herein, we developed novel mixed ionic-electronic conducting materials by simple mixing of poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS) and various DES as additives. The DES addition induces the supramolecular assembly and gelification of PEDOT:PSS forming eutectogels triggered by extensive hydrogen bonding and charge stabilization. The eutectogels feature boosts the mixed ionic-electronic conductivity of PEDOT:PSS up to 368 S cm-1, unveiling great potential as flexible bioelectronics. All the PEDOT:PSS/DES gels showed shear-thinning behavior and viscosity values ranging from 100 to 1000 Pa s. The eutectogels show good injectability with almost instantaneous elastic recovery, making them ideal materials for direct ink writing (DIW). As proof of that, PEDOT:PSS/DES (choline chloride:lactic acid) was 3D printed in different patterns, annealed at high temperature, and assembled into adhesive electrodes. This way tattoos-like electrodes, denoted as Eutecta2 were fabricated and placed in vivo on the forearm and the thumb of human volunteers for electromyography measurements. Eutecta2 hexagonal patterns showed excellent conformability, and their signal-to-noise ratio (SNR) was higher than Ag/AgCl commercial electrodes for thumb motion measurements. Furthermore, forearm motion was measured after 14 days with similar values of SNR, demonstrating long-term stability and reusability. All in all, our findings revealed that DES could be used as inexpensive and safe additives to direct the self-assembly of PEDOT:PSS into supramolecular eutectogels inks for flexible bioelectronics.

Inkjet-Printed Dual-Mode Electrochromic and Electroluminescent Displays Incorporating Ecofriendly Materials.

Displays and indicators are an integral component of everyday electronics. However, the short lifecycle of most applications is currently contributing to the unsustainable growth of electronic waste. In this work, we utilize ecofriendly materials in combination with sustainable processing techniques to fabricate inkjet-printed, ecofriendly dual-mode displays (DMDs). These displays can be used in a reflective mode or an emissive mode by changing between DC and AC operation due to the combination of an electrochromic (EC) and electrochemiluminescent (ECL) layer in a single device. The EC polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) serves as the reflective layer, while an ECL gel made of dimethylsulfoxide (DMSO), poly(lactic-co-glycolic acid) (PLGA), 1-butyl-3-methylimidazoliumbis(oxalato)borate (BMIMBOB), and tris(bipyridine)ruthenium(II) chloride (Ru2+(bpy)3Cl2) enables the emissive mode. The final dual-mode devices exhibited their maximum optical power output of 52 mcd/m2 at 4 V and 40 Hz and achieved an EC contrast of 45% and a coloration efficiency of 244 cm2/C at a wavelength of 690 nm. The fabricated devices showed clear readability in dark and light conditions when operated in reflective or emissive modes. This work demonstrates the applicability of ecofriendly and potentially biodegradable materials to reduce the amount of hazardous components in versatile display technologies.

Single-Ion Lithium Conducting Polymers with High Ionic Conductivity Based on Borate Pendant Groups.

A family of single-ion lithium conducting polymer electrolytes based on highly delocalized borate groups is reported. The effect of the nature of the substituents on the boron atom on the ionic conductivity of the resultant methacrylic polymers was analyzed. To the best of our knowledge the lithium borate polymers endowed with flexible and electron-withdrawing substituents presents the highest ionic conductivity reported for a lithium single-ion conducting homopolymer (1.65×10-4  S cm-1 at 60 °C). This together with its high lithium transference number t Li + =0.93 and electrochemical stability window of 4.2 V vs Li0 /Li+ show promise for application in lithium batteries. To illustrate this, a lithium borate monomer was integrated into a single-ion gel polymer electrolyte which showed good performance on lithium symmetrical cells (<0.85 V at ±0.2 mA cm-2 for 175 h).

Conducting Polymer-Ionic Liquid Electrode Arrays for High-Density Surface Electromyography.

Surface electromyography (EMG) is used as a medical diagnostic and to control prosthetic limbs. Electrode arrays that provide large-area, high density recordings have the potential to yield significant improvements in both fronts, but the need remains largely unfulfilled. Here, digital fabrication techniques are used to make scalable electrode arrays that capture EMG signals with mm spatial resolution. Using electrodes made of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) composites with the biocompatible ionic liquid (IL) cholinium lactate, the arrays enable high quality spatiotemporal recordings from the forearm of volunteers. These recordings allow to identify the motions of the index, little, and middle fingers, and to directly visualize the propagation of polarization/depolarization waves in the underlying muscles. This work paves the way for scalable fabrication of cutaneous electrophysiology arrays for personalized medicine and highly articulate prostheses.

Mixed Ionic-Electronic Conductors Based on PEDOT:PolyDADMA and Organic Ionic Plastic Crystals.

Mixed ionic-electronic conductors, such as poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) are postulated to be the next generation materials in energy storage and electronic devices. Although many studies have aimed to enhance the electronic conductivity and mechanical properties of these materials, there has been little focus on ionic conductivity. In this work, blends based on PEDOT stabilized by the polyelectrolyte poly(diallyldimethylammonium) (PolyDADMA X) are reported, where the X anion is either chloride (Cl), bis(fluorosulfonyl)imide (FSI), bis(trifluoromethylsulfonyl)imide (TFSI), triflate (CF3SO3) or tosylate (Tos). Electronic conductivity values of 0.6 S cm-1 were achieved in films of PEDOT:PolyDADMA FSI (without any post-treatment), with an ionic conductivity of 5 × 10-6 S cm-1 at 70 °C. Organic ionic plastic crystals (OIPCs) based on the cation N-ethyl-N-methylpyrrolidinium (C2mpyr+) with similar anions were added to synergistically enhance both electronic and ionic conductivities. PEDOT:PolyDADMA X / [C2mpyr][X] composites (80/20 wt%) resulted in higher ionic conductivity values (e.g., 2 × 10-5 S cm-1 at 70 °C for PEDOT:PolyDADMA FSI/[C2mpyr][FSI]) and improved electrochemical performance versus the neat PEDOT:PolyDADMA X with no OIPC. Herein, new materials are presented and discussed including new PEDOT:PolyDADMA and organic ionic plastic crystal blends highlighting their promising properties for energy storage applications.

Symmetric All-Organic Battery Containing a Dual Redox-Active Polymer as Cathode and Anode Material.

All-organic batteries are a promising sustainable energy storage technology owing to the wide availability, flexibility, and recyclability of organic/polymeric compounds. The development of all-organic or polymer batteries is still a challenge, as both electrode materials need to be carefully optimized to have a wide difference of redox potential and compatibility with the electrolyte. Herein, dual redox-active polyimides based on phenothiazine and naphthalene tetracarboxylic dianhydride units are presented. After only one optimization step, the electrodes based on these dual redox polymers can be applied simultaneously as anode and cathode in a symmetric all-organic battery. The phenothiazine functional polyimide shows two redox active voltages at around 2.5 and 3.7 V (vs. Li/Li+ ) with high discharge capacities of 160 mAh g-1 . Moreover, the symmetric full battery delivers high power density up to 1542 W kg-1 with stable cyclability for 1000 cycles. This work demonstrates an efficient strategy to develop dual redox active polymer electrodes for next generation all-polymer batteries.

Online Porn Addiction: What We Know and What We Don't-A Systematic Review.

In the last few years, there has been a wave of articles related to behavioral addictions; some of them have a focus on online pornography addiction. However, despite all efforts, we are still unable to profile when engaging in this behavior becomes pathological. Common problems include: sample bias, the search for diagnostic instrumentals, opposing approximations to the matter, and the fact that this entity may be encompassed inside a greater pathology (i.e., sex addiction) that may present itself with very diverse symptomatology. Behavioral addictions form a largely unexplored field of study, and usually exhibit a problematic consumption model: loss of control, impairment, and risky use. Hypersexual disorder fits this model and may be composed of several sexual behaviors, like problematic use of online pornography (POPU). Online pornography use is on the rise, with a potential for addiction considering the "triple A" influence (accessibility, affordability, anonymity). This problematic use might have adverse effects in sexual development and sexual functioning, especially among the young population. We aim to gather existing knowledge on problematic online pornography use as a pathological entity. Here we try to summarize what we know about this entity and outline some areas worthy of further research.

Catechol End-Functionalized Polylactide by Organocatalyzed Ring-Opening Polymerization.

There is a great interest in incorporating catechol moieties into polymers in a controlled manner due to their interesting properties, such as the promotion of adhesion, redox activity or bioactivity. One possibility is to incorporate the catechol as end-group in a polymer chain using a functional initiator by means of controlled polymerization strategies. Nevertheless, the instability of catechol moieties under oxygen and basic pH requires tedious protection and deprotection steps to perform the polymerization in a controlled fashion. In the present work, we explore the organocatalyzed synthesis of catechol end-functional, semi-telechelic polylactide (PLLA) using non-protected dopamine, catechol molecule containing a primary amine, as initiator. NMR and SEC-IR results showed that in the presence of a weak organic base such as triethylamine, the ring-opening polymerization (ROP) of lactide takes place in a controlled manner without need of protecting the cathechol units. To further confirm the end-group fidelity the catechol containing PLLA was characterized by Cyclic Voltammetry and MALDI-TOF confirming the absence of side reaction during the polymerization. In order to exploit the potential of catechol moieties, catechol end-group of PLLA was oxidized to quinone and further reacted with aliphatic amines. In addition, we also confirmed the ability of catechol functionalized PLLA to reduce metal ions to metal nanoparticles to obtain well distributed silver nanoparticles. It is expected that this new route of preparing catechol-PLLA polymers without protection will increase the accessibility of catechol containing biodegradable polymers by ROP.

Electrochemical Behavior of PEDOT/Lignin in Ionic Liquid Electrolytes: Suitable Cathode/Electrolyte System for Sodium Batteries.

Biomass-derived polymers, such as lignin, contain quinone/ hydroquinone redox moieties that can be used to store charge. Composites based on the biopolymer lignin and several conjugated polymers have shown good charge-storage properties. However, their performance has been only studied in acidic aqueous media limiting their applications mainly to supercapacitors. Here, we show that PEDOT/lignin (PEDOT: poly(3,4-ethylenedioxythiophene)) biopolymers are electroactive in aprotic ionic liquids (ILs) and we move a step further by assembling sodium full cell batteries using PEDOT/lignin as electrode material and IL electrolytes. Thus, the electrochemical activity and cycling of PEDOT/lignin electrodes was investigated in 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (BMPyrTFSI), 1-butyl-1-methylpyrrolidinium bis(fluorosulfonyl)imide (BMPyrFSI), 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMImTFSI) and 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide (EMImFSI) IL electrolytes. The effects of water and sodium salt addition to the ILs were investigated to obtain optimum electrolyte systems for sodium batteries. Finally, sodium batteries based on PEDOT/lignin cathode with imidazolium-based IL electrolyte showed higher capacity values than pyrrolidinium ones, reaching 70 mAhg-1 . Our results demonstrate that PEDOT/lignin composites can serve as low cost and sustainable cathode materials for sodium batteries.

Conducting Polymer Iongels Based on PEDOT and Guar Gum.

Conducting polymer hydrogels are attracting much interest in biomedical and energy-storage devices due to their unique electrochemical properties including their ability to conduct both electrons and ions. They suffer, however, from poor stability due to water evaporation, which causes the loss of mechanical and ion conduction properties. Here we show for the first time a conducting polymer gel where the continuous phase is a nonvolatile ionic liquid. The novel conducting iongel is formed by a natural polysaccharide (guar gum), a conductive polymer poly(3,4-ethylenedioxythiophene) (PEDOT), and an ionic liquid (IL) 1-butyl-3-methylimidazolium chloride (BMIMCl). First, an aqueous dispersion of PEDOT:guar gum is synthesized by an oxidative polymerization process of EDOT in the presence of the polysaccharide as stabilizer. The resulting PEDOT:guar gum was isolated as a powder by removing the water via freeze-drying process. In the final step, conducting iongels were prepared by the PEDOT:guar gum mixed with the ionic liquid by a heating-cooling process. The rheological properties show that the material exhibits gel type behavior between 20 and 80 °C. Interestingly, the conducting polymer iongel presents redox properties as well as high ionic conductivities (10-2 S cm-1). This material presents a unique combination of properties by mixing the electronic conductivity of PEDOT, the ionic conductivity and negligible vapor pressure of the ionic liquid and the support and flexibility given by guar gum.

PEDOT Radical Polymer with Synergetic Redox and Electrical Properties.

The development of new redox polymers is being boosted by the increasing interest in the area of energy and health. The development of new polymers is needed to further advance new applications or improve the performance of actual devices such as batteries, supercapacitors, or drug delivery systems. Here we show the synthesis and characterization of a new polymer which combines the present most successful conjugated polymer backbone and the most successful redox active side group, i.e., poly(3,4-ethylenedioxythiophene) (PEDOT), and a nitroxide stable radical. First, a derivative of the 3,4-ethylenedioxythiophene (EDOT) molecule with side nitroxide stable radical group (TEMPO) was synthesized. The electrochemical polymerization of the PEDOT-TEMPO monomer was investigated in detail using cyclic voltammetry, potential step, and constant current methods. Monomer and polymer were characterized by NMR, FTIR, matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF MS), electron spin resonance (ESR) spectroscopy, elemental analysis, cyclic voltammetry, and four-point probe conductivity. The new PEDOT-TEMPO radical polymer combines the electronic conductivity of the conjugated polythiophene backbone and redox properties of the nitroxide group. As an example of application, this redox active polymer was used as a conductive binder in lithium ion batteries. Good cycling stability with high Coulombic efficiency and increased cyclability at different rates were obtained using this polymer as a replacement of two ingredients: conductive carbon additive and polymeric binders.

Automaticity in subtractions depends on problem-size / La automaticidad en las restas depende del tamaño del problema

The evidence showing that simple multiplications and additions can be solved by direct retrieval is considerable. However evidence about division and subtraction is less compelling. By using a "Dcross-operation interference paradigm¡" the present research explores whether subtraction problems can be retrieved without intention and the role of operands(R) problem-size in this process. Sixty-two participants decided whether the displayed addition was correct or not. In "Dfalse additions problems the answer could be the result of the subtractions of the addends (e.g., 7 + 4 = 3) or an unrelated number (e.g., 7 + 4 = 5). Results showed an interference effect, that is, more errors and slower response times in subtraction related problems than in unrelated problems. More importantly, this effect was restricted to small problems (7 + 4 = 3 vs. 7 + 4 = 5), whereas no differences were found for large problems (14 + 8 = 6 vs. 14 + 8 = 7). These results suggest that small subtractions can be retrieved directly as multiplications, questioning a traditional dissociation between operations. We argue that, depending on individual experience, the same representation and processes can be involved in solving additions, subtractions and multiplications

Existe considerable evidencia que muestra que las multiplicaciones y las sumas simples se resuelven de manera directa y automatica. Sin embargo, la evidencia sobre la automaticidad de restas y divisiones es menos convincente. Usando el paradigma de interferencia en la operacion, el presente estudio explora si el resultado de una resta puede ser recuperado inintencionadamente y el rol que juega el tamaño del problema en este proceso. Sesenta y dos participantes tomaron parte en este estudio y tenian que decidir si el resultado de una adicion era o no correcto. En las adiciones incorrectas el resultado podia ser la sustraccion de los sumandos (7 + 4 = 3) o un numero no relacionado (7 + 4 = 5). Nuestros resultados mostraron mas errores y respuestas mas lentas en aquellos problemas cuyo resultado era la sustraccion de los sumandos que en los problemas no relacionados. Sin embargo, estos resultados solo se encontraron en problemas pequeños (7 + 4 = 3 vs. 7 + 4 = 5) y no en problemas mas grandes (14 + 8 = 6 vs. 14 + 8 = 7). Estos resultados sugieren que las sustracciones pequeñas pueden ser recuperadas directamente, cuestionando la existencia de disociaciones entre operaciones. Argumentamos que dependiendo de nuestra experiencia, las mismas representaciones y procesos pueden estar implicados en la resolucion de multiplicaciones, adiciones y sustracciones