Vertically aligned carbon nanofibers: interconnecting solid state electronics with biosystems.

Vertically aligned carbon nanofibers (VACNFs) are grown directly on prefabricated electronic circuits with nanoscale precision. Utilizing the free-standing nanofiber array geometry, we have demonstrated the detection of nucleic acids to construct an ultrasensitive electrochemical sensor. Extending this technology towards in vivo applications, we have modified the free-standing VACNF arrays in order to achieve a multifunctional three dimensional (3-D) matrix that interpenetrates the neuronal network of PC12 cells. We found that PC12 cells cultured on the nanofiber arrays can form an extended neural network upon proper chemical and biochemical modification. The soft 3-D nanofiber array architecture provides a novel platform to fine-tune the topographical, mechanical, chemical, and electrical cues at sub-cellular scales. This biomaterial platform can be used for both fundamental studies of nanomaterial-cell interactions and the development of multifunctional, chronically stable implantable devices. The application of these devices and potential utility as a multifunctional platform for neurophysiology and biochemical studies will be discussed.

High efficient electrical stimulation of hippocampal slices with vertically aligned carbon nanofiber microbrush array.

Long-term neuroprostheses for functional electrical stimulation must efficiently stimulate tissue without electrolyzing water and raising the extracellular pH to toxic levels. Comparison of the stimulation efficiency of tungsten wire electrodes (W wires), platinum microelectrode arrays (PtMEA), as-grown vertically aligned carbon nanofiber microbrush arrays (VACNF MBAs), and polypyrrole coated (PPy-coated) VACNF MBAs in eliciting field potentials in the hippocampus slice indicates that, at low stimulating voltages that preclude the electrolysis of water, only the PPy-coated VACNF MBA is able to stimulate the CA3 to CA1 pathway. Unlike the W wires, PtMEA, as-grown VACNF MBA, and the PPy-coated VACNF MBA elicit only excitatory postsynaptic potentials (EPSPs). Furthermore, the PPy-coated VACNF MBA evokes somatic action potentials in addition to EPSPs. These results highlight the PPy-coated VACNF's advantages in lower electrode impedance, ability to stimulate tissue through a biocompatible chloride flux, and stable vertical alignment in liquid that enables access to spatially confined regions of neuronal cells.

Dielectrophoretic trapping of single bacteria at carbon nanofiber nanoelectrode arrays.

We present an ac dielectrophoretic (DEP) technique for single-cell trapping using embedded carbon nanofiber (CNF) nanoelectrode arrays (NEAs). NEAs fabricated by inlaying vertically aligned carbon nanofibers in SiO2 matrix are applied as "points-and-lid" DEP devices in aqueous solution. The miniaturization of the electrode size provides a highly focused electrical field with the gradient enhanced by orders of magnitude. This generates extremely large positive DEP forces near the electrode surface and traps small bioparticles against strong hydrodynamic forces. This technology promises new capabilities to perform novel cell biology experiments at the nanoscale. We anticipate that the bottom-up approach of such nano-DEP devices allows the integration of millions of nanolectrodes deterministically in lab-on-a-chip devices and will be generally useful for manipulating submicron particles.

Vertically aligned carbon nanofiber architecture as a multifunctional 3-D neural electrical interface.

Developing biomaterial constructs that closely mimic the natural tissue microenvironment with its complex chemical and physical cues is essential for improving the function and reliability of implantable devices, especially those that require direct neural-electrical interfaces. Here we demonstrate that free-standing vertically aligned carbon nanofiber (VACNF) arrays can be used as a multifunctional 3-D brush-like nanoengineered matrix that interpenetrates the neuronal network of PC12 cells. We found that PC12 neuron cells cultured on VACNF substrates can form extended neural network upon proper chemical and biochemical modifications. The soft 3-D VACNF architecture provides a new platform to fine-tune the topographical, mechanical, chemical, and electrical cues at subcellular nanoscale. This new biomaterial platform can be used for both fundamental studies of material-cell interactions and the development of chronically stable implantable neural devices. Micropatterned multiplex VACNF arrays can be selectively controlled by electrical and electrochemical methods to provide localized stimulation with extraordinary spatiotemporal resolution. Further development of this technology may potentially result in a highly multiplex closed-loop system with multifunctions for neuromodulation and neuroprostheses.

Vertically aligned dense carbon nanotube growth with diameter control by block copolymer micelle catalyst templates.

We have grown a dense array of vertically aligned carbon nanotubes (CNTs) with a controlled distribution of diameters by using block copolymer micelles to form and pattern catalyst particles. The block copolymer poly(styrene-block-acrylic acid) (PS16500-PAA4500) was dissolved in toluene to form micelles and then loaded with FeCl3. The metal-loaded micelles were spin-coated on Si and then thermally treated to remove the polymer. Using this process, we produced surfaces patterned with iron oxide catalyst particles with particle densities ranging from 1400 microm(-2) to 3800 microm(-2) and a size distribution of (6.9 +/- 0.8) nm. CNT growth by thermal chemical vapor deposition was then performed on these samples. The low-density catalyst sample produced unaligned, low-density CNTs, whereas the high-density catalyst sample produced vertically aligned, dense CNTs about 10 microm in length. Transmission electron microscopy revealed that the CNTs typically had double and triple graphitic layers with normally distributed diameters of (4.5 +/- 1.1) nm. For comparison, CNTs grown from the standard approach of blanket Fe films had a wide distribution of diameters between 6 and 21 nm. This catalyst preparation approach dramatically sharpens the size distribution of CNTs, compared to standard approaches, and provides a simple means of controlling the areal density of CNTs.

Miniaturized multiplex label-free electronic chip for rapid nucleic acid analysis based on carbon nanotube nanoelectrode arrays.

BACKGROUND: Reducing cost and time is the major concern in clinical diagnostics, particularly in molecular diagnostics. Miniaturization technologies have been recognized as promising solutions to provide low-cost microchips for diagnostics. With the recent advancement in nanotechnologies, it is possible to further improve detection sensitivity and simplify sample preparation by incorporating nanoscale elements in diagnostics devices. A fusion of micro- and nanotechnologies with biology has great potential for the development of low-cost disposable chips for rapid molecular analysis that can be carried out with simple handheld devices. APPROACH: Vertically aligned multiwalled carbon nanotubes (MWNTs) are fabricated on predeposited microelectrode pads and encapsulated in SiO2 dielectrics with only the very end exposed at the surface to form an inlaid nanoelectrode array (NEA). The NEA is used to collect the electrochemical signal associated with the target molecules binding to the probe molecules, which are covalently attached to the end of the MWNTs. CONTENT: A 3 x 3 microelectrode array is presented to demonstrate the miniaturization and multiplexing capability. A randomly distributed MWNT NEA is fabricated on each microelectrode pad. Selective functionalization of the MWNT end with a specific oligonucleotide probe and passivation of the SiO2 surface with ethylene glycol moieties are discussed. Ru(bpy)2+ -mediator-amplified guanine oxidation is used to directly measure the electrochemical signal associated with target molecules. SUMMARY: The discussed MWNT NEAs have ultrahigh sensitivity in direct electrochemical detection of guanine bases in the nucleic acid target. Fewer than approximately 1000 target nucleic acid molecules can be measured with a single microelectrode pad of approximately 20 x 20 microm2, which approaches the detection limit of laser scanners in fluorescence-based DNA microarray techniques. MWNT NEAs can be easily integrated with microelectronic circuitry and microfluidics for development of a fully automated system for rapid molecular analysis with minimum cost.

System optimization for the development of ultrasensitive electronic biosensors using carbon nanotube nanoelectrode arrays.

Vertically aligned multi-walled carbon nanotubes (MWCNTs) have been reported in fabricating nanoelectrode arrays. Further studies on optimizing this system for the development of ultrasensitive DNA sensors are reported here. The mechanical stability of the as-grown MWCNT array can be improved by polymer coating or SiO2 encapsulation. The latter method provides excellent electronic and ionic insulation to the sidewall of MWCNTs and the underlying metal layer, which is investigated with electrochemical impedance spectroscopy. The insulation ensures well-defined nanoelectrode behavior. A method is developed for selectively functionalizing biomolecules at the open end of MWCNTs while keeping the SiO2 surface passivated, using the unique graphitic chemistry. An ultrahigh sensitivity approaching the limit of fluorescence techniques is obtained with this system for DNA detection.

Ultrasensitive label-free DNA analysis using an electronic chip based on carbon nanotube nanoelectrode arrays.

We report the detection of DNA PCR amplicons using an ultrasensitive label-free electronic technique based on multiwalled carbon nanotube (MWNT) nanoelectrode arrays embedded in an SiO(2) matrix. Specific PCR amplicons are reliably detected using electrochemical (EC) methods through allele-specific oligonucleotide hybridization. The inherent guanine bases in the DNA amplicon target of [Formula: see text] bases serve as signal moieties with the aid of Ru(bpy)(3)(2+) mediators, providing an amplified anodic current associated with the oxidation of guanine groups at the nanoelectrode surface. The reduced size and density of the nanoelectrode array provided by MWNTs dramatically improves the sensitivity of EC detection. In addition, the abundant guanine bases in target DNA produce a large signal. Less than [Formula: see text] target amplicons can be detected on a microspot, approaching the sensitivity limit of conventional laser-based fluorescence techniques. This method also eliminates the labelling requirement and makes the measurements much simpler. This platform can be employed for developing highly automated electronic chips with multiplex nanoelectrode arrays for quick DNA analysis.

Assembly of DNA/Fullerene Hybrid Materials.

Ordering of cationic fullerene derivatives on a DNA template by phosphate/fullerene complexation provides a rapid route to organic materials several hundred nanometers in length (shown on the right). Hydrophobic interactions between the fullerene units lead to DNA supercoiling that can be relieved by adding a nonionic surfactant. The products are easily imaged by transmission electron microscopy without the need for heavy-metal staining.