Writing for SICOT-J.

Every time a paper is submitted to the journal, we realize the effort and amount of work it takes for performing the study, writing, formatting, and submitting the paper for peer review. However, how many of these papers are suitable for publication? Medical writing considerations, including an understandable text that does not confuse reading, formality, and ethics in writing, should be kept in mind when preparing and writing a paper to be submitted for publication to a journal. This editorial note offers useful advice for the authors submitting their papers to a journal on what to keep in mind before submission, how to prepare a quality submission, how to win the editor for their paper to avoid rejection, and how to make it to the review process and maybe to get published. It is our belief that these tips and advice on medical writing apply to any author and any journal.

Louis Ombrédanne, a founding member of SICOT.

This paper describes the life and work of Louis Ombrédanne, one of the founding fathers of the SICOT, a notorious French orthopaedic and paediatric surgeon with a strong interest in plastic surgery and reconstruction of post-traumatic defects and also with limb lengthening and treatment of sequalae. Born in Paris in 1871 as a son of a general practitioner doctor, Ombrédanne was a brilliant student enjoying anatomy and surgery since the early years. He was appointed as a Surgeon in 1902 in Paris and became Professor of Surgery in 1907. During the First World War, he worked in Verdun, one of the most exposed hospitals near the battlefield where over 700.000 people died and many cases were affected by head and neck burns and destructions, requiring surgical reconstruction. After the war, Ombrédanne developed Pediatric Surgery and it seems that his powerful drive and charisma explain why these specialties are studied together with orthopaedics in Europe and later in the World. Many innovations like the anaesthetic inhaler with face mask were authored by Ombrédanne and also techniques of limb lengthening, thoracic plasty. He described malignant hyperthermia in children and worked in the Sick Children Hospital in Paris, today Hôpital Necker. In 1929, Ombrédanne participated with a group of enthusiastic surgeons and teachers from many countries to the creation of SICOT during a historical meeting held in Hotel Crillon in Paris. This paper introduces Ombrédanne's work to the current readers and is a tribute to the work of our ancestors who made possible the development of our specialty.

Charnley femoral cemented stem with a permeable and resorbable cement restrictor and low-viscosity cement - Clinical and radiographical evaluation of 100 cases at a mean follow-up of 6.55 years.

INTRODUCTION: In 1979, in his first book dealing with low-friction arthroplasty (LFA), Charnley highlighted the use of a cement restrictor. Breusch and Malchau described in 2005 the "second-generation cementing technique." The main objective of this study was to report on the clinical survival of 100 cases of Charnley femoral component implanted in 2007 and 2008 using a permeable and resorbable cement restrictor and a low-viscosity antibiotic-loaded cement. The secondary objectives were to analyze the complications and side effects and the accuracy of the device positioning. MATERIAL AND METHODS: This was a monocentric retrospective review of a prospectively compiled database. Diaphyseal restrictor was biodegradable and permeable to gas, blood, and fluids to avoid intramedullary over pression during cementation. The cement was a low-viscosity antibiotic-loaded cement. Among 3555 patients, we selected the first continuous 100 cases of patients where we implanted the device. Survival probability was computed according to Kaplan-Meier method. RESULTS: Mean follow-up was 6.55 ± 2.6 (range 1-11). Considering femoral component revision as the endpoint, survival rate was 100%. No patients died intraoperatively, none in the first month and the first year after surgery. No early periprosthetic fractures have been reported. DISCUSSION: As described initially by Charnley, the use of a cement restrictor was highly recommended through the different generations of cementing techniques. Hypotensive episodes and cardiac arrest have been reported during cement insertion. In our series, we did not deplore any adverse effect related to the cementation. CONCLUSION: Our study demonstrates a 100% survival rate of a cemented femoral component without adverse effects when using routinely a resorbable and permeable cement restrictor and a low-viscosity cement. Bone cement is still a fantastic ally for the surgeon and the patients.

Primary cementless total knee arthroplasty with or without stem extension: a matched comparative study of ninety eight standard stems versus ninety eight long stems after more than ten years of follow-up.

INTRODUCTION: Using a cementless fixation for total knee arthroplasty (TKA) is controversial. We hypothesized that cementless tibial base plate with a monoblock long stem (MLS) would provide secure tibial alignment and stable fixation when bone conditions were considered as poor for a cementless fixation. The purpose of this study was to compare the mean eight year survivorship of cementless standard keels (SK) vs cementless MLS. MATERIAL METHODS: We report a matched series of 98 cases of SK and 98 cases of MLS in patients with poor bone conditions. The two cohorts were statistically compared. Revision for tibial loosening was used as the endpoint in the survivorship analysis. RESULTS: We recorded two cases of tibial loosening and three cases of bipolar loosening in the SK group (0% MLS vs 5% SK). No tibial loosening occurred in the MLS group (statistically significant). No tibial periprosthetic or intra-operative fractures occurred in either group. The survivorship at eight years of follow-up was 95.6% in the SS cohort vs 100% in the MLS cohort using revision for tibial loosening as the endpoint. DISCUSSION: This study was not randomized. Its strength was that it took into account the comparative midterm outcomes of a matched cohort of patients implanted with two types of cementless components in the same bone conditions. We did not record any tibial loosening in the MLS group. Using long stems has been criticized but we did not observe any adverse reactions and no intra-operative tibial fracture occurred. CONCLUSION: MLS improves the alignment and fixation of cementless TKA. This is a safe solution when bone conditions are poor or modified by previous surgery.

Mortality Rate and Mid-Term Outcomes of Total Hip Arthroplasty Using Dual Mobility Cups for the Treatment of Femoral Neck Fractures in a Middle Eastern Population.

BACKGROUND: The dual mobility cups (DMCs) were shown to reduce dislocation rate following total hip arthroplasty for any etiology, including femoral neck fractures. No reported studies evaluating DMC results for femoral neck fracture in a Middle Eastern population were found in the literature. METHODS: This study aims to look for mortality rate, clinical, and functional outcomes in a population having specific rituals involving extreme hip positions as part of their daily activities. RESULTS: Of an initial sample of 174 patients (177 operated hips), 18 (10.3%) patients (20 hips) died after a mean of 39.6 ± 13.8 months (ranging from 2 to 49 months) with only 3 (1.7%) during the first post-operative year. Twelve patients (13 hips) were lost to follow-up and 19 patients (19 hips) had their radiological data incomplete. In the final sample of 125 patients (125 hips), no dislocation, aseptic loosening, or infection was encountered. The mean modified Hip Harris Score was of 94.8 ± 8.4. The mean modified Hip Harris Score of 40 patients who used to practice regularly oriental sitting position or prayers was 94.1 ± 3.1. After surgery, 36 of these 40 patients (90%) described their hip as "a forgotten hip." Multivariate analyses found correlation only between mortality and cardiovascular co-morbidities. CONCLUSION: DMC implants showed excellent clinical and functional results. The majority of patients having rituals and customs involving extreme hip positions were able to resume their daily activities. The observed low mortality rate should incite future research to investigate its correlation with the use of DMCs.

Intraprosthetic dislocation of dual mobility total hip arthroplasty: still occurring?

PURPOSE: The objective was to identify predictive factors for intraprosthetic dislocation (IPD) and to understand how improvements in dual mobility cups (DMC) have helped to reduce dramatically the occurrence of this complication. METHODS: DM mobile inserts retrieved from 93 hips were divided into three groups: first-generation DMC with IPD ("firstDMC-IPD"), first-generation DMC with over 15 years of implantation without IPD ("firstDMC-noIPD"), and latest-generation DMC ("newDMC"). The predictive factors for IPD based on clinical, prosthetic, radiological and intraoperative characteristics were analysed by multivariate analysis. The surface of each retrieved mobile insert was analysed using three-dimensional CT scan in order to compare their rim wear. RESULTS: Three predictive factors for IPD were found: a high BMI, a wide rough stem neck and a large cup size. Wear of the firstDMC-noIPD inserts was significantly less than those of firstDMC-IPD inserts and significantly more than those of newDMC inserts. For the firstDMC-IPD inserts, the rim's outer surface wear was significantly greater than the rim's inner surface wear. CONCLUSIONS: IPD is a specific complication related to wear of the DM mobile insert due to failure of the liner's retaining rim, especially from the rim's outer surface. This long-term issue is different to the early traumatic complication, which can happen after an attempt at closed reduction of a DM THA dislocation. Recent modifications in the design and the coating of contemporary DMC and femoral stems, as well as improvements in the mobile insert itself, seem to corroborate our assumptions about the IPD mechanism and contribute to the quasi-disappearance of this complication.

Correction to: Intraprosthetic dislocation of dual mobility total hip arthroplasty: still occurring?

The published online version contains mistake in the author list for the author name "Di Iorio Alexandre" was incorrectly presented.

How is patella height modified after total knee arthroplasty?

INTRODUCTION: Since the first measurement method of patella height in 1929 (Janssen), more than 16 methods have been described. Most of these measures are not suitable to measure patella height after total knee arthroplasty (TKA). One of us (JC) modified the original Caton Deschamps (oCD), index with a new relative index called modified Caton Deschamps (mCD) index, by using new landmarks. The purpose of this study was to determine how patella height is modified after TKA. MATERIAL AND METHOD: Sixty primary TKAs were consecutively prospectively enrolled. One type of implant was used (cementless postero-stabilized TKA, rotating plateau, cemented patella resurfacing). Patient's characteristics, functional and radiological outcomes were recorded pre-operatively and at one year follow-up. Pre-operative and post-operative outcomes were compared by paired t-test. Post-operative outcomes were compared between groups by one-way analysis of variance. RESULTS: Average difference between pre and post-operative mCD was 0.19 in this series. In 81.7% of cases, patella was lowered. Patients were classified in three groups according to patella height lowering. Between these three groups, no significant statistical differences (IKS score knee and function, range of motion) could be identified. DISCUSSION: In TKA, patella assessment in sagittal plane is as important as frontal or horizontal planes. True patella infera (TPI) is mostly due to patella tendon shortening measured by oCD. Pseudo patella infera (PPI) measured by mCD is mostly due to joint line elevation (over femoral cut with an over thickness of the tibial component). In this study a moderate patella lowering (minor than 15%) does not have a significant impact on the functional results (IKS, ROM) nevertheless in 80% patella is lowered. The next step will be to analyze precisely what factors are influencing this lowering and what prevention could be suggested in primary and revision TKA.

Contemporary dual-mobility cup regional and private register: methodology and results.

INTRODUCTION: The dual-mobility cup (DMC) was introduced in 1979. Due to lack of referenced publications, this interesting and innovating concept was ignored during close to 20 years. However, 180 studies (level III or IV) have now been published. Evidence-based medicine is based on level I studies. Over the past three decades, the role of national registries developed with the intention of surveying orthopaedic implants. In 2012, we developed, registered, and implemented a specific database for contemporary DMC. MATERIAL AND METHODS: Data are collected with an electronic case-report form, and this evaluation is limited to a single product line . From May 2012 to December 2016, 2090 cases of Quattro cup implantation have been registered; results of the first 636 primary cases with a minimum follow-up of three years were previously reported (series 1). Of the 1454 remaining cases, dislocation rate only was monitored (series 2) and results are reported here. RESULTS: In series1 comprising 553 degenerative diseases and 83 proximal femoral fractures (PFF), one dislocation (1.2%) occurred in PFF and none in degenerative disease. Survivorship (infection excluded) at three years was 99.8%. In series 2 (1315 degenerative diseases; 139 PFFs), dislocation rate was 0.27% (four cases). In neither series did we observe any intraprosthetic dislocation. DISCUSSION: Results of this private regional register confirm the high efficiency of DMC to decrease dislocation rate (0.23%). Few outcomes of DMC in primary total hip arthroplasty (THA) are published in national registries. The Swedish Hip Arthroplasty Register has reported on 287 primary DMC hips of 78,098 THAs. No dislocations were reported. We conclude that DMC decreases dislocation rate, and the national registry of Lithuania also reports a significant decrease in the rate of revision for dislocation in the DMC group. These data-available online-allow us to monitor DMC in real time, although they lack short-term follow-up.

Dual-mobility cup in total hip arthroplasty in patients less than fifty five years and over ten years of follow-up : A prospective and comparative series.

PURPOSE: We report clinical and radiological outcome of a dual mobility cup (DMC) of 2nd generation after a minimum of ten year-follow-up (FU). The goal of this work was to compare the results of this DMC in patients aged less than 55 years and in patients aged more than 55 years. METHODS: From 2000 to 2005, a prospective and consecutive series of 119 THAs with a cementless DMC of 2nd generation (GIROS) were performed in patients aged less than 55 years and 444 in patients aged more than 55 years. RESULTS: The mean FU was 11 years (8 to 15 years). Survivorships (failure of both components or cup loosening) were not different between patients aged less than 55 years and patients aged more than 55 years. There was no dislocation. DEVANE classification, Harris, PMA and Oxford scores improved after THA but no difference could be found between between < 55 years and > 55 years patients. CONCLUSION: These results are better than those of first generation (BOUSQUET) DMC (77 % of survival rate at 20 years of FU). These results are in the same agreement than those of the literature: 99 % of survival rate at 14.2 years of FU for KERBOULL with a low friction arthroplasty and 96.5 % at ten years of FU for ceramic/ceramic bearing (R CHANA). The DMC for young patient is a relevant surgical option with no dislocation and excellent clinical results and survival rate at more than ten years of FU.

Low friction arthroplasty and dual mobility cup: a new gold standard.

INTRODUCTION: Low friction arthroplasty (LFA) introduced by Sir John Charnley was the gold standard for many years. Dislocation and infection are the first causes for early revision. Late failures are polyethylene (PE) wear and loosening. Due to dislocation risk we slowly switched to the use of LFA with dual mobility cups (DMC). The purposes of this study are (1) to assess whether our changes have improved outcomes and (2) what is the new gold standard? MATERIAL AND METHODS: We selected from an observational registry of 1,091 cases of hybrid Charnley total hip arthroplasty (THA). The acetabular component was either DMC in 455 cases or fixed cup (FC) in 636 cases. RESULTS: Three dislocations (0.6%) occurred in the DMC group (none revised). In the FC group 54 dislocated (8.49%) and 20 were recurrent and underwent revision (revision rate 3.14%). In the DMC group, five acetabular and three femoral revisions were performed (revision rate for loosening 1.7%). In the FC group 19 cases underwent acetabular revision, and five cases had femoral component revised (revision rate for loosening 3.7%). DISCUSSION: Charnley's LFA has proven over 50 years of excellent survivorship. To decrease dislocation risk, one suggested increasing femoral head diameter. Gilles Bousquet proposed another way, namely, the DMC concept. Dislocation is no longer a critical issue with DMC as demonstrated in our series and main series. DMC in primary THA is still a subject of debate. Mid-term results do not demonstrate a higher rate of wear than LFA. What is the current gold standard? LFA was and is our current gold standard in association with a DMC.

Equivalent wear performance of dual mobility bearing compared with standard bearing in total hip arthroplasty: in vitro study.

PURPOSE: Osteolysis in total hip arthroplasty (THA) depends on polyethylene wear and dictates the survival of the prosthesis. Dual mobility in THAs, which is claimed to reduce dislocation risk, has very good long-term clinical results. However, little is known about how the liner wears in this design, compared to the standard single mobility model. METHODS: A comparative study looking at wear of a conventional ultra-high-molecular-weight polyethylene liner, using gravimetric measurement, between dual mobility implants and standard implants, was performed on a simulator in accordance with a normed protocol based on the same dimensions, environmental conditions and stresses. A linear regression test was employed. RESULTS: Under the same conditions (loading, cycles, sterilization, material and surface roughness), the gravimetric wear (for conventional polyethylene) is comparable between a standard and a dual mobility cup. This correlates to ten year follow-up results of dual mobility cup. DISCUSSION - CONCLUSION: This in vitro equivalent wear serves to confirm the very good long-term clinical results observed with dual mobility bearing, whose use should not be restricted by concerns about increased polyethylene wear.

Patellar height assessment in total knee arthroplasty: a new method.

INTRODUCTION: We described in 1981 a method to evaluate patellar height in normal and symptomatic knees on sagittal X-ray view. This index is a frequently used method, yet it is not suitable after a total knee arthroplasty (TKA). MATERIAL AND METHOD: The original method measures the distance between the distal margin of the articular surface of the patella (point A) and the anterosuperior angle of the tibial plateau (point T), then the length of the patellar articular surface (AP). The index is AT/AP ratio (normal values range from 0.8 to 1.2). After TKA, the T landmark is no longer available, so we must define a new T' landmark. This point is situated at the intersection between the line perpendicular to the tibial posterior cortex elevated at the tip of the fibular head and the tibial anterior cortex. This remarkable landmark can be identified before and after TKA, with a new relative index AT'/AP ratio. This modified method allows the comparison of patella height before and after TKA. RESULTS: We have used this modified index with the collaboration of several authors during the testing of different models of TKA, with an accurate reproducibility. Repeatability (usually called intra-observer reliability) was good, with intra-class correlation coefficients (ICCs) between 0.58 and 0.75 among the observers. Reproducibility (usually called inter-observer reliability) was also considered as good, with ICC ranging from 0.64 to 0.72. DISCUSSION: Patella height measurement has to be assessed with the original method (AT/AP) to detect patella infera that could influence the surgical approach. The correlation between original and modified indexes has to be assessed. The modification of patella height after TKA could be evaluated through the modified index and compared with functional results.

A comparative and retrospective study of three hundred and twenty primary Charnley type hip replacements with a minimum follow up of ten years to assess whether a dual mobility cup has a decreased dislocation risk.

PURPOSE: Mid- and long-term follow-up of Charnley total hip arthroplasty (THA) demonstrated good functional results with 85 % survivorship at 25-year follow-up. However, dislocation still remains an unsolved problem. Dislocation may occur throughout the patient's and implant's life. The aim of this study is to answer the question: does a dual mobility cup (DMC) decrease the dislocation risk? METHODS: We report comparative results at ten years of follow-up of two groups of primary cemented Charnley-type THA, one with a standard polyethylene cup (group 1, n = 215) and the other one with a DMC (group 2, n = 105). RESULTS: In group 1, 26 dislocations (12.9 %) occurred. In group 2 only one dislocation (0.9 %) occurred. This dislocation was successfully reduced by closed reduction, without any recurrence. This difference was statistically significant (p = 0.0018). In group 1, the reason for revision was recurrent dislocation in 21 cases. Five patients were revised for other reasons. The global revision rate was 12.9 %. In group 2, two patients needed revision surgery for aseptic loosening. The global revision rate was 2.1 %. This difference was statistically significant (p = 0.054). The goal was reached for the patients of group 2 who had more risks factors for dislocation (age, aetiology, American Society of Anesthesiologists and Devane scores) than those of group 1. CONCLUSIONS: When using a DMC, we observed a low rate of dislocation in primary THA (0.9 %). This surgical choice seems to be a safe and effective technique in Charnley-type THA, especially in a high-risk population.

Tibial tubercle osteotomy in patello-femoral instability and in patellar height abnormality.

The aim of this study was to present the different surgical procedures of tibial tubercle osteotomies for patellar instability or patellar mispositioning such as patella alta or patella infera. This study analysed the Caton-Deschamps index used for assessment of vertical patella height in order to make a precise plan for tibial tuberosity osteotomies. This study included 61 knees (50 patients) treated for patellar instability with patella alta and 24 patients treated for patella infera of mechanical origin. The results of medial transfer of the tibial tuberosity, with or without distal transfer in cases of patellar instability with patella alta, gives excellent results for stability in 76.8% of the cases. The results of the proximal transfer of the tibial tuberosity in cases of patella infera were excellent or good in 80% of the cases in our series of 24 patients. A precise preoperative plan is needed with determination of the vertical patellar height using the Caton-Deschamps index and the situation of the tibial tuberosity and the Tibial Tubercle to Trochlear Groove distance (TT-TG) of the knee on CT scan in order to obtain satisfactory results.