Self-assembly of 1,3,5-benzenetribenzoic acid on Ag and Cu at the liquid/solid interface.

Assembly of 1,3,5-benzenetribenzoic acid (H3BTB) from solution on Au substrates modified by underpotential deposited Ag and Cu layers was studied by near edge X-ray absorption fine structure spectroscopy, X-ray photoelectron spectroscopy and scanning tunneling microscopy. Adsorption of H3BTB on Cu resulted in disordered layers with sporadic occurrence of ordered molecular aggregates. In contrast, highly ordered layers were obtained on Ag which exhibit a pronounced row structure and involve a monopodal bidentate adsorption geometry of the molecules through carboxylate coordinating bonding. The row structure arises from π-stacking of the molecules and is accompanied by hydrogen bonding interactions between the COOH groups of adjacent rows. As a consequence of the geometry of the H3BTB molecule and the dominance of intermolecular over molecule-substrate interactions, the SAM forms an open structure featuring a grooved surface and nanotunnels.

Sequential nested assembly at the liquid/solid interface.

Studying the stepwise assembly of a four component hybrid structure on Au(111)/mica, the pores of a hydrogen bonded bimolecular network of 3,4,9,10-perylenetetracarboxylic diimide (PTCDI) and 1,3,5-triazine-2,4,6-triamine (melamine) were partitioned by three and four-armed molecules based on oligo([biphenyl]-4-ylethynyl)benzene, followed by the templated adsorption of either C60 fullerene or adamantane thiol molecules. The characterisation by ambient scanning tunneling microscopy (STM) reveals that the pore modifiers exhibit dynamics which pronouncedly depend on the molecular structure. The three-armed molecule 1,3,5-tris([1,1'-biphenyl]-4-ylethynyl)benzene (3BPEB) switches between two symmetry equivalent configurations on a time scale fast compared to the temporal resolution of the STM. Derivatisation of 3BPEB by hydroxyl groups substantially reduces the switching rate. For the four-armed molecule configurational changes are observed only occasionally. The observation of isolated fullerenes and small clusters of adamantane thiol molecules, which are arranged in a characteristic fashion, reveals the templating effect of the trimolecular supramolecular network. However, the fraction of compartments filled by guest molecules is significantly below one for both the thermodynamically controlled adsorption of C60 and the kinetically controlled adsorption of the thiol with the latter causing partial removal of the pore modifier. The experiments, on the one hand, demonstrate the feasibility of templating by nested assembly but, on the other hand, also pinpoint the requirement for the energy landscape to be tolerant to variations in the assembly process.

Underpotential deposition of Cu on Au(111) from neutral chloride containing electrolyte.

The structure of a chloride terminated copper monolayer electrodeposited onto Au(111) from a CuSO4/KCl electrolyte was investigated ex situ by three complementary experimental techniques (scanning tunneling microscopy (STM), photoelectron spectroscopy (PES), X-ray standing wave (XSW) excitation) and density functional theory (DFT) calculations. STM at atomic resolution reveals a stable, highly ordered layer which exhibits a Moiré structure and is described by a (5 × 5) unit cell. The XSW/PES data yield a well-defined position of the Cu layer and the value of 2.16 Å above the topmost Au layer suggests that the atoms are adsorbed in threefold hollow sites. The chloride exhibits some distribution around a distance of 3.77 Å in agreement with the observed Moiré pattern due to a higher order commensurate lattice. This structure, a high order commensurate Cl overlayer on top of a commensurate (1 × 1) Cu layer with Cu at threefold hollow sites, is corroborated by the DFT calculations.

Self-Assembled Monolayers of Oligophenylenecarboxylic Acids on Silver Formed at the Liquid-Solid Interface.

A series of para-oligophenylene mono- and dicarboxylic acids (R-(C6H4)nCOOH, n = 1-3, R = H,COOH) was studied. Adsorbed on Au(111)/mica modified by an underpotential deposited bilayer of Ag, the self-assembled monolayers (SAMs) were analyzed by near-edge X-ray absorption fine structure spectroscopy, X-ray photoelectron spectroscopy, and scanning tunneling microscopy. In all cases SAMs are formed with molecules adopting an upright orientation and anchored to the substrate by a carboxylate. Except benzoic acid, all SAMs could be imaged at molecular resolution, which revealed highly crystalline layers with a dense molecular packing. The structures of the SAMs are described by a rectangular (5 × âˆš3) unit cell for the prevailing phase of the monocarboxylic acids and an oblique ([Formula: see text]) unit cell for the dicarboxylic acids, thus evidencing a pronounced influence of the second COOH moiety on the SAM structure. Density functional theory calculations suggest that hydrogen bonding between the SAM-terminating COOH moieties accounts for the difference. Contrasting other classes of SAMs, the systems studied here are determined by intermolecular interactions whereas molecule-substrate interactions play a secondary role. Thus, eliminating problems arising from the mismatch between the molecular and the substrate lattices, coordinatively bonded carboxylic acids on silver should provide considerable flexibility in the design of SAM structures.

Enhancement of CO2 Adsorption and Catalytic Properties by Fe-Doping of [Ga2(OH)2(L)] (H4L = Biphenyl-3,3',5,5'-tetracarboxylic Acid), MFM-300(Ga2).

Metal-organic frameworks (MOFs) are usually synthesized using a single type of metal ion, and MOFs containing mixtures of different metal ions are of great interest and represent a methodology to enhance and tune materials properties. We report the synthesis of [Ga2(OH)2(L)] (H4L = biphenyl-3,3',5,5'-tetracarboxylic acid), designated as MFM-300(Ga2), (MFM = Manchester Framework Material replacing NOTT designation), by solvothermal reaction of Ga(NO3)3 and H4L in a mixture of DMF, THF, and water containing HCl for 3 days. MFM-300(Ga2) crystallizes in the tetragonal space group I4122, a = b = 15.0174(7) Å and c = 11.9111(11) Å and is isostructural with the Al(III) analogue MFM-300(Al2) with pores decorated with -OH groups bridging Ga(III) centers. The isostructural Fe-doped material [Ga(1.87)Fe(0.13)(OH)2(L)], MFM-300(Ga(1.87)Fe(0.13)), can be prepared under similar conditions to MFM-300(Ga2) via reaction of a homogeneous mixture of Fe(NO3)3 and Ga(NO3)3 with biphenyl-3,3',5,5'-tetracarboxylic acid. An Fe(III)-based material [Fe3O(1.5)(OH)(HL)(L)(0.5)(H2O)(3.5)], MFM-310(Fe), was synthesized with Fe(NO3)3 and the same ligand via hydrothermal methods. [MFM-310(Fe)] crystallizes in the orthorhombic space group Pmn21 with a = 10.560(4) Å, b = 19.451(8) Å, and c = 11.773(5) Å and incorporates µ3-oxo-centered trinuclear iron cluster nodes connected by ligands to give a 3D nonporous framework that has a different structure to the MFM-300 series. Thus, Fe-doping can be used to monitor the effects of the heteroatom center within a parent Ga(III) framework without the requirement of synthesizing the isostructural Fe(III) analogue [Fe2(OH)2(L)], MFM-300(Fe2), which we have thus far been unable to prepare. Fe-doping of MFM-300(Ga2) affords positive effects on gas adsorption capacities, particularly for CO2 adsorption, whereby MFM-300(Ga(1.87)Fe(0.13)) shows a 49% enhancement of CO2 adsorption capacity in comparison to the homometallic parent material. We thus report herein the highest CO2 uptake (2.86 mmol g(-1) at 273 K at 1 bar) for a Ga-based MOF. The single-crystal X-ray structures of MFM-300(Ga2)-solv, MFM-300(Ga2), MFM-300(Ga2)·2.35CO2, MFM-300(Ga(1.87)Fe(0.13))-solv, MFM-300(Ga(1.87)Fe(0.13)), and MFM-300(Ga(1.87)Fe(0.13))·2.0CO2 have been determined. Most notably, in situ single-crystal diffraction studies of gas-loaded materials have revealed that Fe-doping has a significant impact on the molecular details for CO2 binding in the pore, with the bridging M-OH hydroxyl groups being preferred binding sites for CO2 within these framework materials. In situ synchrotron IR spectroscopic measurements on CO2 binding with respect to the -OH groups in the pore are consistent with the above structural analyses. In addition, we found that, compared to MFM-300(Ga2), Fe-doped MFM-300(Ga(1.87)Fe(0.13)) shows improved catalytic properties for the ring-opening reaction of styrene oxide, but similar activity for the room-temperature acetylation of benzaldehyde by methanol. The role of Fe-doping in these systems is discussed as a mechanism for enhancing porosity and the structural integrity of the parent material.

Nucleation and Early Stages of Layer-by-Layer Growth of Metal Organic Frameworks on Surfaces.

High resolution atomic force microscopy (AFM) is used to resolve the evolution of crystallites of a metal organic framework (HKUST-1) grown on Au(111) using a liquid-phase layer-by-layer methodology. The nucleation and faceting of individual crystallites is followed by repeatedly imaging the same submicron region after each cycle of growth and we find that the growing surface is terminated by {111} facets leading to the formation of pyramidal nanostructures for [100] oriented crystallites, and triangular [111] islands with typical lateral dimensions of tens of nanometres. AFM images reveal that crystallites can grow by 5-10 layers in each cycle. The growth rate depends on crystallographic orientation and the morphology of the gold substrate, and we demonstrate that under these conditions the growth is nanocrystalline with a morphology determined by the minimum energy surface.

Bestowing structure upon the pores of a supramolecular network.

Trigonal molecules compartmentalise the pores of a honeycomb network of 3,4:9,10-tetracarboxylic diimide (PTCDI) and 1,3,5-triazine-2,4,6-triamine (melamine). Extending the 1,3,5-tri(phenylene-ethynylene)benzene core by a phenyl group allows for a well-defined accommodation of the molecule into two symmetry equivalent positions in the pore. The corresponding styryl or phenylene-ethynylene derivatives exceed the pore size and, thus, impede pore modification.

Packing of Isophthalate Tetracarboxylic Acids on Au(111): Rows and Disordered Herringbone Structures.

Scanning tunnelling microscopy (STM) has been used to investigate the formation of hydrogen-bonded structures of the isophthalate tetracarboxylic acids, biphenyl-3,3',5,5'-tetracarboxylic acid (BPTC), terphenyl-3,3″,5,5″-tetracarboxylic acid (TPTC), and quarterphenyl-3,3‴,5,5‴-tetracarboxylic acid (QPTC), via deposition from solution onto Au(111). STM data reveal that ordered structures can be formed from an aqueous solution leading to the formation of rows for the shortest acid BPTC, while the longer molecules TPTC and QPTC adopt a herringbone-like structure with significant degrees of disorder. The influence of solvent and substrate on the molecular ordering is discussed, and density functional theory is used to identify molecular models for these new phases.

Solution preparation of two-dimensional covalently linked networks by polymerization of 1,3,5-Tri(4-iodophenyl)benzene on Au(111).

The polymerization of 1,3,5-tri(4-iodophenyl)benzene (TIPB) on Au(111) through covalent aryl-aryl coupling is accomplished using a solution-based approach and investigated by scanning tunneling microscopy. Drop-casting of the TIPB monomer onto Au(111) at room temperature results in poorly ordered noncovalent arrangements of molecules and partial dehalogenation. However, drop-casting on a preheated Au(111) substrate yields various topologically distinct covalent aggregates and networks. Interestingly, some of these covalent nanostructures do not adsorb directly on the Au(111) surface, but are loosely bound to a disordered layer of a mixture of chemisorbed iodine and molecules, a conclusion that is drawn from STM data and supported by X-ray photoelectron spectroscopy. We argue that the gold surface becomes covered by a strongly chemisorbed iodine monolayer which eventually inhibits further polymerization.