Rejection evaluation after renal transplantation using MR diffusion tensor imaging.

Background Renal allograft dysfunction monitoring is mainly performed using the serum creatinine (SC) level, Doppler ultrasound (US), or renal biopsy. Recently proposed diffusion-based magnetic resonance imaging (MRI) methods have been explored as new, non-invasive tools for assessing renal function after transplantation. Purpose To investigate the value of fractional anisotropy (FA) measurements in the evaluation of acute rejection cases after renal transplant. Material and Methods Doppler US and MRI diffusion tensor imaging (DTI) were performed in 21 patients with graft dysfunction requiring graft biopsy after renal transplantation and in 21 patients with normal graft function. The MR examinations were performed on a 1.5-T MRI using two b-values (0 and 800 s/mm2). FA values were measured from the cortex and medulla of the transplanted kidney at the upper, middle, and lower poles. Results Twenty-one transplant patients diagnosed with acute rejection (Group 1) were compared to the control group of 21 transplant patients with normal graft function (Group 2). The measured FA values of the medulla were 0.19 ± 0.02 and 0.22 ± 0.05 ( P = 0.017) for Groups 1 and 2, respectively. On the other hand, the measured FA values of the renal cortex were 0.18 ± 0.04 and 0.18 ± 0.04 ( P = 0.97) for Groups 1 and 2, respectively. Conclusion The good correlation between the renal medulla FA values and allograft function shows that MR DTI has potential for non-invasive functional assessment of transplanted kidneys. On the other hand, the renal cortex FA values had no correlation with the allograft function.

Characterization of 3D geometric distortion of magnetic resonance imaging scanners commissioned for radiation therapy planning.

OBJECTIVE: To develop a method for the assessment and characterization of 3D geometric distortion as part of routine quality assurance for MRI scanners commissioned for Radiation Therapy planning. MATERIALS AND METHODS: In this study, the in-plane and through-plane geometric distortions on a 1.5T GE MRI-SIM unit are characterized and the 2D and 3D correction algorithms provided by the vendor are evaluated. We used a phantom developed by GE Healthcare that covers a large field of view of 500mm, and consists of layers of foam embedded with a matrix of ellipsoidal markers. An in-house Java-based software module was developed to automatically assess the geometric distortion by calculating the center of each marker using the center of mass method, correcting of gross rotation errors and comparing the corrected positions with a CT gold standard data set. Spatial accuracy of typical pulse sequences used in RT planning was assessed (2D T1/T2 FSE, 3D CUBE, T1 SPGR) using the software. The accuracy of vendor specific geometric distortion correction (GDC) algorithms was quantified by measuring distortions before and after the application of the 2D and 3D correction algorithms. RESULTS: Our algorithm was able to accurately calculate geometric distortion with sub-pixel precision. For all typical MR sequences used in Radiotherapy, the vendor's GDC was able to substantially reduce the distortions. Our results showed also that the impact of the acquisition produced a maximum variation of 0.2mm over a radial distance of 200mm. It has been shown that while the 2D correction algorithm remarkably reduces the in-plane geometric distortion, 3D geometric distortion further reduced the geometric distortion by correcting both in-plane and through-plane distortions in all acquisitions. CONCLUSION: The presented methods represent a valuable tool for routine quality assurance of MR applications that require stringent spatial accuracy assessment such as radiotherapy. The phantom used in this study provides three dimensional arrays of control points. These tools and the detailed results can be also used for developing new geometric distortion correction algorithms or improving the existing ones.

Effect of imaging parameters on the accuracy of apparent diffusion coefficient and optimization strategies.

PURPOSE: We aimed to investigate the effect of key imaging parameters on the accuracy of apparent diffusion coefficient (ADC) maps using a phantom model combined with ADC calculation simulation and propose strategies to improve the accuracy of ADC quantification. METHODS: Diffusion-weighted imaging (DWI) sequences were acquired on a phantom model using single-shot echo-planar imaging DWI at 1.5 T scanner by varying key imaging parameters including number of averages (NEX), repetition time (TR), echo time (TE), and diffusion preparation pulses. DWI signal simulations were performed for varying TR and TE. RESULTS: Magnetic resonance diffusion signal and ADC maps were dependent on TR and TE imaging parameters as well as number of diffusion preparation pulses, but not on the NEX. However, the choice of a long TR and short TE could be used to minimize their effects on the resulting DWI sequences and ADC maps. CONCLUSION: This study shows that TR and TE imaging parameters affect the diffusion images and ADC maps, but their effect can be minimized by utilizing diffusion preparation pulses. Another key imaging parameter, NEX, is less relevant to DWI and ADC quantification as long as DWI signal-to-noise ratio is above a certain level. Based on the phantom results and data simulations, DWI acquisition protocol can be optimized to obtain accurate ADC maps in routine clinical application for whole body imaging.

A comparison of liver fat content as determined by magnetic resonance imaging-proton density fat fraction and MRS versus liver histology in non-alcoholic fatty liver disease.

BACKGROUND: Many imaging methods have been defined for quantification of hepatic steatosis in non-alcoholic fatty liver disease (NAFLD). However, studies comparing the efficiency of magnetic resonance imaging-proton density fat fraction (MRI-PDFF), magnetic resonance spectroscopy (MRS), and liver histology for quantification of liver fat content are limited. PURPOSE: To compare the efficiency of MRI-PDFF and MRS in the quantification of liver fat content in individuals with NAFLD. MATERIAL AND METHODS: A total of 19 NAFLD patients underwent MRI-PDFF, MRS, and liver biopsy for quantification of liver fat content. The MR examinations were performed on a 1.5 HDx MRI system. The MRI protocol included T1-independent volumetric multi-echo gradient-echo imaging with T2* correction and spectral fat modeling and MRS with STEAM technique. RESULTS: A close correlation was observed between liver MRI-PDFF- and histology- determined steatosis (r = 0.743, P < 0.001) and between liver MRS- and histology-determined steatosis (r = 0.712, P < 0.001), with no superiority between them (ƶ = 0.19, P = 0.849). For quantification of hepatic steatosis, a high correlation was observed between the two MRI methods (r = 0.986, P < 0.001). MRI-PDFF and MRS accurately differentiated moderate/severe steatosis from mild/no hepatic steatosis (P = 0.007 and 0.013, respectively), with no superiority between them (AUCMRI-PDFF = 0.881 ± 0.0856 versus AUCMRS = 0.857 ± 0.0924, P = 0.461). CONCLUSION: Both MRI-PDFF and MRS can be used for accurate quantification of hepatic steatosis.

Quantification of liver, pancreas, kidney, and vertebral body MRI-PDFF in non-alcoholic fatty liver disease.

PURPOSE: The purpose of the present study was to determine liver, pancreas, kidney, and vertebral fat deposition in NAFLD patients by proton density fat fraction (PDFF) using magnetic resonance imaging (MRI) and to evaluate the relationships among them. METHODS: A total of 41 biopsy-proven NAFLD patients underwent MRI-PDFF with IDEAL-IQ. MRI protocol included T1-independent volumetric multi-echo gradient-echo imaging with T2* correction and spectral fat modeling. The MR examinations were performed on a 1.5 HDx MRI system. MRI-PDFF measurements were obtained from liver, pancreas, renal cortex and sinus, and vertebral body. Liver biopsy specimens were retrieved from the archives and evaluated by one pathologist according to NASH CRN. RESULTS: The median age of the patients was 47 years. The median interval between liver biopsy and MRI examination was 16 days. Mean liver, pancreas, renal cortex, renal sinus, T12 and L1 vertebral body MRI-PDFFs were 18.7%, 5.7%, 1.7%, 51%, 43.2%, and 43.5%, respectively. No correlation between either liver MRI-PDFF or histological steatosis, and other organ MRI-PDFFs was observed. A good correlation between pancreas and vertebral body MRI-PDFFs, and pancreas and renal sinus MRI-PDFFs was observed. Diabetic patients had higher average pancreas MRI-PDFF compared to non-diabetics (12.2%, vs., 4.8%; P = 0.028). CONCLUSIONS: Pancreas and vertebral body MRI-PDFF is well correlated in NAFLD patients and both of them are higher in diabetic patients which may explain increased bone fractures in diabetics. MRI-PDFF can be used to demonstrate fat fractions of different organs and tissues and to understand fat metabolism.

Fat fraction estimation of the vertebrae in females using the T2*-IDEAL technique in detection of reduced bone mineralization level: comparison with bone mineral densitometry.

OBJECTIVE: The aim of this study was to use the T2*-iterative decomposition of water and fat with echo asymmetry and least squares estimation quantification (IDEAL) technique to estimate vertebral fat fraction (FF) and compare it with bone mineralization levels in females. MATERIALS AND METHODS: Forty-five (mean age, 49.5 years) consecutive women who underwent magnetic resonance imaging and spinal dual-energy x-ray absorptiometry bone mineral density (BMD) examination constituted the study population. Depending on t scores derived from dual-energy x-ray absorptiometry, the vertebrae were classified into 3 groups (1, healthy; 2, osteopenia; and 3, osteoporosis). The Spearman ρ test was used to investigate the presence of correlation between FF and BMD. Analysis of covariance was performed to compare the differences among the groups. The FF cutoff value for the prediction of osteoporosis/osteopenia was evaluated with the receiver operating characteristic curve analysis. RESULTS: We found a moderate negative correlation between BMD (grams per square centimeter) and FF (r = - 0.42), and it was statistically significant (P < 0.001). The FF mean of age-corrected group 1 (45.17%; SD, 1.3) was lower than that of groups 2 (51.77%; SD, 0.69) and 3 (50.82%; SD, 1.5), and the difference was statistically significant (P < 0.001, P = 0.021). The area under the receiver operating characteristic curve for FF was 0.80 (95% confidence interval, 0.72-0.86). The optimal cutoff point was obtained as 39%, and for this cutoff point, the sensitivity and the specificity were 93% and 60.3%, respectively. CONCLUSIONS: The T2*-IDEAL technique can be used as an alternative technique in estimation of FF, and it is possible to detect reduced bone mineralization of the vertebrae by estimation of FF value with this technique.

Hepatic steatosis: quantification by proton density fat fraction with MR imaging versus liver biopsy.

PURPOSE: To determine utility of proton density fat fraction (PDFF) measurements for quantifying the liver fat content in patients with nonalcoholic fatty liver disease (NAFLD), and compare these results with liver biopsy findings. MATERIALS AND METHODS: This retrospective study was approved by the institutional review board with waivers of informed consent. Between June 2010 and April 2011, 86 patients received a diagnosis of NAFLD. Ten patients did not accept liver biopsy and six patients had contraindications for magnetic resonance (MR) imaging. Seventy patients were included in this study. Seventy patients with NAFLD (40 men, 30 women; mean age, 44.7 years; range, 16-69 years) underwent T1-independent volumetric multiecho gradient-echo imaging with T2* correction and spectral fat modeling. Median time interval between MR imaging and liver biopsy was 14.5 days (range, 0-259 days). MR examinations were performed with a 1.5-T MR imaging system. Complex-based PDFF measurements were performed by placing regions of interest in Couinaud system segments V-VI and all liver segments from I to VIII. All liver biopsy specimens were retrieved from archives and evaluated by one pathologist for hepatic steatosis according to criteria from a previous study. Pearson correlation coefficient, receiver operating characteristics, and linear regression analyses were used for statistical analyses. RESULTS: Mean PDFF calculated with MR imaging was 18.1% ± 9.5 (standard deviation). Close correlation for quantification of hepatic steatosis was observed between PDFF and liver biopsy (r = 0.82). PDFF was effective in discriminating moderate or severe hepatic steatosis from mild or no hepatic steatosis, with area under the curve of 0.95. The correlation between biopsy and PDFF-determined steatosis was less pronounced when fibrosis was present (r = 0.60) than when fibrosis was absent (r = 0.86; P = .02). CONCLUSION: PDFF measurement by MR imaging provided a noninvasive, accurate estimation of the presence and grading of hepatic steatosis in patients with NAFLD. Hepatic fibrosis reduced the correlation between biopsy results and PDFF.

Is quantitative magnetic resonance imaging valuable in the assessment of trabecular bone structure in osteoporosis?

OBJECTIVES: This study aims to evaluate the value of quantitative magnetic resonance imaging in the assessment of bone trabeculae in osteoporosis by comparing the results with dual-energy X-ray (DXA) absorptiometry. PATIENTS AND METHODS: The study consisted of 85 postmenopausal women (mean age 57.2 years; range 43 to 83 years) underwent both DXA absorptiometry and lumbar quantitative magnetic resonance imaging. T2 and T2* values were calculated by magnetic resonance imaging and the results were compared with bone mineral density. RESULTS: According to bone mineral density t-scores; there were 32 normal, 30 osteopenic, and 23 osteoporotic patients. T2 values of L1- L4 were different in normal with osteoporotic, and the osteopenic with osteoporotic groups. There were increased T2 values with reducing t-scores. Comparing the normal and osteopenic groups, no statistical difference was found in T2 measurements of lumbar vertebrae, except L4. T2* values of L1-L4 vertebrae were not statistically different between the study groups. CONCLUSION: T2 measurements of lumbar vertebra on quantitative magnetic resonance imaging may be useful in evaluation of bone trabeculae in osteoporosis, and may also be helpful in differentiation of osteoporotic from normal, and osteopenic from osteoporotic patients.

Staging of hip avascular necrosis: is there a need for DWI?

BACKGROUND: No comprehensive study has been performed to stage avascular necrosis of the hip using diffusion-weighted imaging (DWI). PURPOSE: To determine apparent diffusion co-efficient (ADC) alterations in hip avascular necrosis (AVN) and to determine variations of ADC values according to stages of disease. MATERIAL AND METHODS: The study is approved by our institutional review board and local ethical committee. Written informed consent was present for each subject. Thirty-five femoral heads of 21 cases affected by AVN were included in the study. Control group consisted of both femoral heads of 10 healthy volunteers. The hips affected by AVN were staged according to Ficat and Arlet classification system from I to IV. All cases underwent to routine hip magnetic resonance imaging (MRI) and DWI performed with a single-shot fast spin echo sequence at a b value of 600 s/mm(2). The ADC values were calculated automatically by placing ROIs on AVN lesions in affected patients and both femoral heads of control group. The median ADC value obtained from femoral heads of control group and that from AVN lesions were compared by Mann-Whitney U test. The median ADC values of AVN lesions at different stages were compared by Kruskal-Wallis test. RESULTS: The median ADC value of normal bone measured in control group was 185.5 ± 133.2 x 10(-6) mm(2)/s. The median ADC value measured in hip avascular necrosis lesions was 988.0 ± 332.7 x 10(-6) mm(2)/s. ADC values in hip AVN lesions were statistically significantly higher than normal bone marrow (P<0.01). The median ADC values of hips with avascular necrosis at stage I, II, III, IV were 817.5 ± 172.1 x 10(-6) mm(2)/s, 902.0 ± 181.0 x 10(-6) mm(2)/s, 1200.0 ± 363.2 x 10(-6) mm(2)/s and 1024.0 ± 324.0 x 10(-6) mm(2)/s, respectively. There was no statistically significant difference among AVN lesions at stages I, II, III and IV (P>0.05). CONCLUSION: Although DWI is a promising imaging tool that provides valuable diagnostic information in hip AVN, it fails to distinguish between different stages, and therefore is of limited value.

The role of DTI in early detection of cervical spondylotic myelopathy: a preliminary study with 3-T MRI.

INTRODUCTION: The radiological diagnosis of cervical spondylotic myelopathy (CSM) has to be made as soon as possible, since surgery performed in earlier stages during the course of CSM was reported to be more successful when compared with later stages. We hypothesized that diffusion tensor imaging (DTI) may detect CSM in earlier stages, before the appearance of signal increase in T2-weighted sequences. METHODS: A total of 16 patients with neurological signs and symptoms of CSM but without hyperintensity in spinal cord on T2-weighted sequences enrolled in the study. The magnetic resonance (MR) examinations were performed on a 3-T MR imaging system. Apparent diffusion coefficient (ADC) and fractional anisotropy (FA) maps were generated on axial plane. The ADC and FA measurements in each individual were made at the level of most severe cervical canal stenosis and at a nonstenotic level. Student's t test was used to compare FA and ADC values of the spinal cord in stenotic and nonstenotic segments. We also investigated if there was a correlation between DTI parametrics and duration of clinical symptoms by using Pearson correlation analysis. RESULTS: All patients showed changes in DTI parametrics at stenotic segments. While FA values of the spinal cord at the stenotic level showed a statistically significant reduction, there was a statistically significant increase in the measured ADC values (p < 0.001). There was no statistical correlation between the duration of symptoms and DTI parametrics. CONCLUSION: Our preliminary findings indicate that DTI may show abnormalities in the spinal cord before the development of T2 hyperintensity on conventional sequences in patients with CSM.

Focal sparing of iron and fat in liver tissue in patients with hemosiderosis: diagnosis with combination of R2* relaxometry and proton density fat fraction calculation by MRI.

PURPOSE: To demonstrate magnetic resonance imaging (MRI) findings of the focal sparing of iron and fat in liver tissue in patients with hepatic iron overload. MATERIALS AND METHODS: We retrospectively reviewed 48 liver MRIs performed in patients with hemosiderosis from 2007-2009. We selected five (10%) of these patients based on the observation of focal signal abnormalities in the posterior aspect of segment 4, anterior to the portal vein, on in- and out-of-phase T1-weighted gradient-echo images. To further characterize this signal abnormality in segment 4, we calculated the simultaneous proton density fat fraction and R2* relaxometry using the investigational version of a quantitative chemical shift-based water-fat separation method known as IDEAL-IQ with a multiecho gradient echo sequence. Visual assessment and objective measurements were performed for the focal sparing of iron and fat. RESULTS: The diagnoses of the five patients included thalassemia (n=3), aplastic anemia (n=1), and myelodosysplastic syndrome (n=1). The focal sparing of iron was hypointense on R2* relaxometry compared to the rest of the liver. Fat fraction images failed to demonstrate a heterogeneous fat distribution. The focal sparing of fat in the liver with iron overload appeared as a reduced fat-containing area (fat fraction, 4%) in segment 4 compared to the remainder of the left lobe (fat fraction, 12%). The R2* map revealed no difference between the focal fat-sparing area and the rest of the liver. Areas in which focal fat and iron sparing occurred were not visible on post-contrast and diffusion-weighted images. CONCLUSION: Focal fat and iron sparing in patients with liver siderosis can mimic a lesion. Quantitative MRI techniques can help to characterize abnormal signal changes in segment 4 of the liver in patients with hepatic iron overload and can eliminate the need for biopsy of pseudolesions.

Diffusion-weighted imaging of the appendicular skeleton with a non-Carr-Purcell-Meiboom-Gill single-shot fast spin-echo sequence.

OBJECTIVE: The objective of our study was to prospectively evaluate the signal-to-noise ratio (SNR) improvement in diffusion-weighted imaging (DWI) of the appendicular skeleton with the use of a newly developed non-Carr-Purcell-Meiboom-Gill (non-CPMG) single-shot fast spin-echo (SSFSE) sequence and to evaluate its effect on apparent diffusion coefficient (ADC) measurements. SUBJECTS AND METHODS: DWI of the bone was performed in 32 patients with an echo-planar imaging (EPI)-based sequence followed by a non-CPMG SSFSE technique. SNR and ADC values were measured over a lesion-free right femoral head. A score was assigned for each set of images to assess image quality. When a bone lesion was present, contrast-to-noise ratio (CNR) and ADC were also measured. Paired Student's t tests were used for statistical analysis. RESULTS: The mean (+/- SD) SNR values were 9.89 +/- 2.20 and 81.68 +/- 4.87 for EPI and non-CPMG SSFSE DWI, respectively. SNR values associated with the non-CPMG SSFSE technique were found to be significantly higher than those measured with the EPI-based DWI technique (p < 0.01). Mean ADCs of the bone were 0.57 +/- 0.20 and 0.29 +/- 0.15 x 10(-3) mm2/s, respectively, for EPI and non-CPMG SSFSE DWI. Image quality scores were higher for the non-CPMG SSFSE DWI technique (p < 0.05) than for the EPI-based DWI technique. Overall lesion CNR was found to be higher in DWI performed with the non-CPMG SSFSE technique. CONCLUSION: The non-CPMG SSFSE technique provides a significant improvement over the currently used EPI-based DWI technique and has the potential to be a powerful tool in imaging the appendicular skeleton.

Magnetic resonance cerebral metabolic rate of oxygen utilization in hyperacute stroke patients.

The purpose of this study was to explore the feasibility of obtaining magnetic resonance-measured cerebral metabolic rate of oxygen utilization (MR-CMRO(2)) in acute ischemic stroke patients. Seven stroke patients were serially imaged: 4.5 +/- 0.9 hours (tp1), 3 to 5 days (tp2), and 1 to 3 months (tp3) after symptom onset. Diffusion-weighted, perfusion-weighted, and multiecho gradient-echo/spin-echo images were acquired; cerebral blood flow and oxygen extraction fraction maps were obtained from which CMRO(2) was calculated as the product of cerebral blood flow and oxygen extraction fraction. The final infarct lesions obtained from tp3 T2-weighted images and the "penumbra" obtained from the tp1 perfusion-weighted image-defined lesion were coregistered onto tp1 CMRO(2) maps. CMRO(2) values in the region of brain that eventually infarcted were reduced to 0.40 +/- 0.24 of the respective region on the contralateral hemisphere. The "salvaged penumbra" defined by the area of mismatch between the final infarct and the tp1 perfusion-weighted lesion demonstrated an average CMRO(2) value of 0.55 +/- 0.11 of the contralateral hemisphere. Although our results are preliminary and require further evaluation, the ability to obtain in vivo measurements of MR-CMRO(2) noninvasively potentially can provide information for determining brain tissue viability in acute ischemic stroke patients.