Area-selective atomic layer deposition on 2D monolayer lateral superlattices.

The advanced patterning process is the basis of integration technology to realize the development of next-generation high-speed, low-power consumption devices. Recently, area-selective atomic layer deposition (AS-ALD), which allows the direct deposition of target materials on the desired area using a deposition barrier, has emerged as an alternative patterning process. However, the AS-ALD process remains challenging to use for the improvement of patterning resolution and selectivity. In this study, we report a superlattice-based AS-ALD (SAS-ALD) process using a two-dimensional (2D) MoS2-MoSe2 lateral superlattice as a pre-defining template. We achieved a minimum half pitch size of a sub-10 nm scale for the resulting AS-ALD on the 2D superlattice template by controlling the duration time of chemical vapor deposition (CVD) precursors. SAS-ALD introduces a mechanism that enables selectivity through the adsorption and diffusion processes of ALD precursors, distinctly different from conventional AS-ALD method. This technique facilitates selective deposition even on small pattern sizes and is compatible with the use of highly reactive precursors like trimethyl aluminum. Moreover, it allows for the selective deposition of a variety of materials, including Al2O3, HfO2, Ru, Te, and Sb2Se3.

Layer-Controlled Growth of Single-Crystalline 2D Bi2O2Se Film Driven by Interfacial Reconstruction.

As semiconductor scaling continues to reach sub-nanometer levels, two-dimensional (2D) semiconductors are emerging as a promising candidate for the post-silicon material. Among these alternatives, Bi2O2Se has risen as an exceptionally promising 2D semiconductor thanks to its excellent electrical properties, attributed to its appropriate bandgap and small effective mass. However, unlike other 2D materials, growth of large-scale Bi2O2Se films with precise layer control is still challenging due to its large surface energy caused by relatively strong interlayer electrostatic interactions. Here, we present the successful growth of a wafer-scale (∼3 cm) Bi2O2Se film with precise thickness control down to the monolayer level on TiO2-terminated SrTiO3 using metal-organic chemical vapor deposition (MOCVD). Scanning transmission electron microscopy (STEM) analysis confirmed the formation of a [BiTiO4]1- interfacial structure, and density functional theory (DFT) calculations revealed that the formation of [BiTiO4]1- significantly reduced the interfacial energy between Bi2O2Se and SrTiO3, thereby promoting 2D growth. Additionally, spectral responsivity measurements of two-terminal devices confirmed a bandgap increase of up to 1.9 eV in monolayer Bi2O2Se, which is consistent with our DFT calculations. Finally, we demonstrated high-performance Bi2O2Se field-effect transistor (FET) arrays, exhibiting an excellent average electron mobility of 56.29 cm2/(V·s). This process is anticipated to enable wafer-scale applications of 2D Bi2O2Se and facilitate exploration of intriguing physical phenomena in confined 2D systems.

Large Memory Window of van der Waals Heterostructure Devices Based on MOCVD-Grown 2D Layered Ge4 Se9.

Van der Waals (vdW) heterostructures have drawn much interest over the last decade owing to their absence of dangling bonds and their intriguing low-dimensional properties. The emergence of 2D materials has enabled the achievement of significant progress in both the discovery of physical phenomena and the realization of superior devices. In this work, the group IV metal chalcogenide 2D-layered Ge4 Se9 is introduced as a new selection of insulating vdW material. 2D-layered Ge4 Se9 is synthesized with a rectangular shape using the metalcorganic chemical vapor deposition system using a liquid germanium precursor at 240 °C. By stacking the Ge4 Se9 and MoS2 , vdW heterostructure devices are fabricated with a giant memory window of 129 V by sweeping back gate range of ±80 V. The gate-independent decay time reveals that the large hysteresis is induced by the interfacial charge transfer, which originates from the low band offset. Moreover, repeatable conductance changes are observed over the 2250 pulses with low non-linearity values of 0.26 and 0.95 for potentiation and depression curves, respectively. The energy consumption of the MoS2 /Ge4 Se9 device is about 15 fJ for operating energy and the learning accuracy of image classification reaches 88.3%, which further proves the great potential of artificial synapses.

Gas-Phase Alkali Metal-Assisted MOCVD Growth of 2D Transition Metal Dichalcogenides for Large-Scale Precise Nucleation Control.

Advances in large-area and high-quality 2D transition metal dichalcogenides (TMDCs) growth are essential for semiconductor applications. Here, the gas-phase alkali metal-assisted metal-organic chemical vapor deposition (GAA-MOCVD) of 2D TMDCs is reported. It is determined that sodium propionate (SP) is an ideal gas-phase alkali-metal additive for nucleation control in the MOCVD of 2D TMDCs. The grain size of MoS2 in the GAA-MOCVD process is larger than that in the conventional MOCVD process. This method can be applied to the growth of various TMDCs (MoS2 , MoSe2 , WSe2 , and WSe2 ) and the generation of large-scale continuous films. Furthermore, the growth behaviors of MoS2 under different SP and oxygen injection time conditions are systematically investigated to determine the effects of SP and oxygen on nucleation control in the GAA-MOCVD process. It is found that the combination of SP and oxygen increases the grain size and nucleation suppression of MoS2 . Thus, the GAA-MOCVD with a precise and controllable supply of a gas-phase alkali metal and oxygen allows achievement of optimum growth conditions that maximizes the grain size of MoS2 . It is expected that GAA-MOCVD can provide a way for batch fabrication of large-scale atomically thin electronic devices based on 2D semiconductors.

Low-Temperature and High-Quality Growth of Bi2O2Se Layered Semiconductors via Cracking Metal-Organic Chemical Vapor Deposition.

Ternary metal-oxy-chalcogenides are emerging as next-generation layered semiconductors beyond binary metal-chalcogenides (i.e., MoS2). Among ternary metal-oxy-chalcogenides, especially Bi2O2Se has been demonstrated in field-effect transistors and photodetectors, exhibiting ultrahigh performance with robust air stability. The growth method for Bi2O2Se that has been reported so far is a powder sublimation based chemical vapor deposition. The first step for pursuing the practical application of Bi2O2Se as a semiconductor material is developing a gas-phase growth process. Here, we report a cracking metal-organic chemical vapor deposition (c-MOCVD) for the gas-phase growth of Bi2O2Se. The resulting Bi2O2Se films at very low growth temperature (∼300 °C) show single-crystalline quality. By taking advantage of the gas-phase growth, the precise phase control was demonstrated by modulating the partial pressure of each precursor. In addition, c-MOCVD-grown Bi2O2Se exhibits outstanding electrical and optoelectronic performance at room temperature without passivation, including maximum electron mobility of 127 cm2/(V·s) and photoresponsivity of 45134 A/W.

Growth and Interlayer Engineering of 2D Layered Semiconductors for Future Electronics.

Layered materials that do not form a covalent bond in a vertical direction can be prepared in a few atoms to one atom thickness without dangling bonds. This distinctive characteristic of limiting thickness around the sub-nanometer level allowed scientists to explore various physical phenomena in the quantum realm. In addition to the contribution to fundamental science, various applications were proposed. Representatively, they were suggested as a promising material for future electronics. This is because (i) the dangling-bond-free nature inhibits surface scattering, thus carrier mobility can be maintained at sub-nanometer range; (ii) the ultrathin nature allows the short-channel effect to be overcome. In order to establish fundamental discoveries and utilize them in practical applications, appropriate preparation methods are required. On the other hand, adjusting properties to fit the desired application properly is another critical issue. Hence, in this review, we first describe the preparation method of layered materials. Proper growth techniques for target applications and the growth of emerging materials at the beginning stage will be extensively discussed. In addition, we suggest interlayer engineering via intercalation as a method for the development of artificial crystal. Since infinite combinations of the host-intercalant combination are possible, it is expected to expand the material system from the current compound system. Finally, inevitable factors that layered materials must face to be used as electronic applications will be introduced with possible solutions. Emerging electronic devices realized by layered materials are also discussed.

Metal-agglomeration-suppressed growth of MoS2 and MoSe2 films with small sulfur and selenium molecules for high mobility field effect transistor applications.

This work reports a breakthrough technique for achieving high quality and uniform molybdenum dichalcogenide (MoX2 where X = S, Se) films on large-area wafers via metal-agglomeration-suppressed growth (MASG) with small chalcogen (X-) molecules at growth temperatures (TG) of 600 °C or lower. In order to grow MoS2 films suitable for field effect transistors (FETs), S-molecules should be pre-deposited on Mo films at 60 °C prior to heating the substrate up to TG. The pre-deposited S-molecules successfully suppressed the agglomeration of Mo during sulfurization and prevented the formation of protruding islands in the resultant sulfide films. The small X-molecules supplied from a thermal cracker reacted with Mo-precursor film to form MoX2. The film quality strongly depends on the temperatures of cracking and reservoir zones, as well as TG. The MoS2 film grown at 570 °C showed a thickness variation of less than 3.3% on a 6 inch-wafer. The mobility and on/off current ratio of 6.1 nm-MoS2 FET at TG = 570 °C were 59.8 cm2 V-1 s-1 and 105, respectively. The most significant advantages of the MASG method proposed in this work are its expandability to various metal dichalcogenides on larger substrates as well as a lower TG enabled by using reactive small molecules supplied from a cracker, for which temperature is independently controlled.