Co-Mn-Fe spinel-carbon composite catalysts enhanced persulfate activation for degradation of neonicotinoid insecticides: (Non) radical path identification, degradation pathway and toxicity analysis.

The extensive utilization of neonicotinoid insecticides (NNIs) in agricultural practices ultimately poses a significant threat to both the environment and human health. This work focuses on the efficient degradation and detoxification of the representative NNI, thiamethoxam (THX), and explores the underlying mechanism using a Co-Fe-Mn mixed spinel doped carbon composite catalyst activated persulfate. The findings demonstrate that the composite effectively degrades THX, achieving a degradation rate of 95% in 30 mins, while requiring only a fraction (one-sixteenth) of the oxidant dosage compared to pure carbon. The study aimed to examine the negative impact of reactive halogens on reactive oxygen species within a saline environment. The degradation byproducts were linked to the presence of two common electron-withdrawing groups, namely halogens and nitro in the THX molecule. It was hypothesized that the degradation process was primarily influenced by C-N bond breaking and hydroxylation occurring between the diazine oxide and 2-chlorothiazole rings. Consequently, dehalogenation and carbonylation processes facilitated the elimination of halogenated components and pharmacophores from the THX, leading to detoxification. In addition to the identified free radical pathway including SO4•-, •OH and O2•- contributed to THX degradation, the participation of non-radical pathways (1O2 and electron transfer) were also confirmed. The efficacy of detoxification was further validated through toxicity assessment, employing quantitative conformation relationship prediction and microbial culture utilizing Bacillus subtilis.

Design strategies and mechanisms of g-C3N4-based photoanodes for photoelectrocatalytic degradation of organic pollutants in water.

Emerging photoelectrocatalytic (PEC) systems integrate the advantages of photocatalysis and electrocatalysis and are considered as a promising technology for solving the global organic pollution problem in water environments. Among the photoelectrocatalytic materials applied for organic pollutant degradation, graphitic carbon nitride (CN) has the combined advantages of environmental compatibility, stability, low cost, and visible light response. However, pristine CN has disadvantages such as low specific surface area, low electrical conductivity, and high charge complexation rate, and how to improve the degradation efficiency of PEC reaction and the mineralization rate of organic matter is the main problem faced in this field. Therefore, this paper reviews the progress of various functionalized CN used for PEC reaction in recent years, and the degradation efficiency of these CN-based materials is critically evaluated. First, the basic principles of PEC degradation of organic pollutants are outlined. Then, engineering strategies to enhance the PEC activity of CN (including morphology control, elemental doping, and heterojunction construction) are focused on, and the structure-activity relationships between these engineering strategies and PEC activity are discussed. In addition, the important role of influencing factors on the PEC system is summarized in terms of mechanism, to provide guidance for the subsequent research. Finally, suggestions and perspectives are provided for the preparation of efficient and stable CN-based photoelectrocatalysts for practical wastewater treatment applications.

Foliar spraying with a mixture of transpiration inhibitor-rhamnolipid reduces the Cd content in rice grains.

A field experiment was conducted to investigate the effectiveness and mechanisms of foliar spraying of transpiration inhibitor (TI) and different amounts of rhamnolipid (Rh) on the Cd content in rice grain. The contact angle of TI on the rice leaves was significantly reduced when it was combined with one critical micelle concentration of Rh. The Cd concentration in the rice grain in the presence of TI, TI + 0.5Rh, TI + 1Rh, and TI + 2Rh significantly decreased by 30.8 %, 41.7 %, 49.4 %, and 37.7 % respectively, compared with the control treatment. Specifically, the Cd content with TI + 1Rh was as low as 0.182 ± 0.009 mg/kg, which meets the national food safety requirements (< 0.2 mg/kg). The rice yield and plant biomass of TI + 1Rh were highest compared to the other treatments, possibly because of the alleviation of oxidative stress due to Cd. The hydroxyl and carboxyl concentrations in the soluble components in the leaf cells for the TI + 1Rh treatment were the highest compared to the other treatments. Our results demonstrated that the foliar spraying of TI + 1Rh is an efficient method to reduce Cd accumulation in rice grain. It holds potential for the future development of safe food production in soils polluted with Cd.

Remediation of Cr(VI) contaminated soil by chitosan stabilized FeS composite and the changes in microorganism community.

In-suit immobilization is one of the major strategies to remediate heavy metals contaminated soil with the effectiveness largely depends on the characteristics of the added chemical reagents/materials. In this study, chitosan stabilized FeS composite (CS-FeS) was prepared to evaluate the performance of remediating the high and toxic hexavalent chromium contaminated soil from the effectiveness and microbial response aspects. The characterization analysis confirmed the successful preparation of composite, and the introduction of chitosan successfully stabilized FeS to protect it from rapid oxidation as compared to bare FeS particles. With the addition dosage at 0.1%, about 85.6% and 81.3% of Cr(VI) was reduced in 3 d based on toxicity characteristic leaching procedure (TCLP) and CaCl2 extraction, and the reduction efficiency increased to 96.6% and 94.8% in 7 d, respectively. The Cr(VI) was non-detected in the TCLP leachates with increase the CS-FeS composites to 0.5%. The percentages of HOAc-extractable Cr decreased from 25.17% to 6.12% accompanied with the increase in the residual Cr from 4.26% to 13.77% and improvement of soil enzyme activity under CS-FeS composites addition. Cr(VI) contamination reduced the diversity of microbial community in soil. Three dominate prokaryotic microorganisms, namely Proteobacteria, Actinobacteria and Firmicutes, were observed in Cr-contaminated soil. The addition of CS-FeS composites increased the microbial diversity especially for that in relative lower abundance. The relative abundance of Proteobacteria and Firmicute related to Cr-tolerance and reduction increased in CS-FeS composites added soils. Taking together, these results demonstrated the potential and promising of using the CS-FeS composites for Cr(VI) polluted soil remediation.

Treatment of amoxicillin-containing wastewater by Trichoderma strains selected from activated sludge.

This study screened a Trichoderma strain (Trichoderma pubescens DAOM 166162) from activated sludge to solve the limitation of traditional biological processes in the treatment of amoxicillin (AMO) containing wastewater. The mechanism of the removal of AMO wastewater by T. pubescens DAOM 166162 (TPC) was studied. AMO resulted in a higher protein percentage in the extracellular polymeric substances (EPS) secreted by TPC, which facilitated the removal of AMO from the wastewater. Fourier transform infrared spectroscopy and excitation-emission matrix were used to characterize EPS produced by metabolizing different carbon sources. It was found that the hydroxyl group was the primary functional group in EPS. The life activity of TPC was the cause of the pH rise. The main pathway of degradation of AMO by TPC was the hydroxyl group uncoupling the lactam ring and the hydrolysis of AMO in an alkaline environment. The removal efficiency of AMO in wastewater by TPC was >98 % (24 h), of which the biodegradation efficiency was 70.01 ± 1.48 %, and the biosorption efficiency was 28.44 ± 2.97 %. In general, TPC is an effective strain for treating wastewater containing AMO. This research provides a new idea for AMO wastewater treatment.

Expanding the valorization of waste mushroom substrates in agricultural production: progress and challenges.

Waste mushroom substrate (WMS) generated in large quantities from mushroom production process has caused severe environmental pollution. As a sustainable resource, the valorization of WMS in the agricultural field has attracted attention due to the abundant active components. A comprehensive review of valorization of WMS in agricultural production is meaningful to promote the further utilization of this resource. This paper provided an overview of the valorization in sustainable agricultural production using WMS, including animal and crop farming improvement, and agricultural environmental restoration. Moreover, the limitations and the possible development directions of WMS in agricultural production were discussed. Different sustainable cycle models for WMS in agricultural production were proposed. The aim of this review is to provide a feasible solution for the favorable treatment of WMS and improvement of agricultural production quality.

Extraction and utilization of active substances from edible fungi substrate and residue: A review.

The expansion of the edible fungi industry has resulted in the production of large amounts of edible fungus residues, causing great pressure on environmental protection.Therefore, research on edible fungus residue utilization has become a controversial issue. Thus far, numerous efforts have been devoted to separate active substances from edible fungus substrates and residues for high application value utilization. Building upon this, the main methods for extracting active substances from edible mushroom residues are reviewed, and the mechanisms, influencing factors, and trade-offs of the various methods are analysed. Furthermore, the existing and possible directions of utilization of the extracted active substances are reviewed and discussed. Finally, challenges and prospects for the extraction and utilization of different substances in edible fungus residues are proposed. This review provides an effective strategy for protecting the ecological environment and promoting the sustainable development of human society.

Introduction of acid mine drainage in the direct production of 5-hydroxymethylfurfural from raw biomass and expanding the use of biomass conversion residue.

Direct production of 5-hydroxymethylfurfural (HMF) through biomass always needs the addition of exogenous catalysts and causes extra costs. Herein, acid mine drainage (AMD), one of the traditional wastewaters, was introduced as a natural catalyst to produce HMF directly from lignocellulosic biomass. Key factors in the biomass conversion were optimized and investigated by the response surface methodology (RSM), and the HMF yield reached 13.51 wt% under optimal conditions. The metal elements and the acidic environment in AMD activated the Fenton reaction to effectively destroy the lignocellulose structure and synergistically promote the formation of HMF. Furthermore, the biomass substrate in the biomass conversion was indirectly modified by the AMD during this process. The biomass conversion residue could be prepared by pyrolysis to obtain a functional metal-loaded carbon material with good adsorption of thiamethoxam (THX), which provides a sustainable solution for the disposal of biomass conversion residue.

Thermochemical conversion of heavy metal contaminated biomass: Fate of the metals and their impact on products.

With the rapid depletion of fossil energy and increasingly severe environmental pollution, the development of biomass resources for biorefineries has become a new research focus. However, heavy metals may be released during the thermochemical treatment when the biomass materials used in biomass conversion are contaminated by heavy metals. This can cause secondary environmental pollution or transference to the target products, reducing product quality. Therefore, having a systematic understanding of the fate of heavy metals in biomass conversion is necessary for alleviating potential risks. This study presents the current status of contaminated biomass and conversion products involving thermochemical processes, the migration, transformation, and impact of heavy metals in biomass conversion was investigated, and the utilization of heavy metals in contaminated biomass was briefly outlined. This review aims to link biomass conversion to the fate of heavy metals, avoid existing risks as much as possible to produce cleaner products efficiently, and promote the sustainable development of heavy metal contaminated biomass resources.

Hydrogen sulfide and calcium effects on cadmium removal and resistance in the white-rot fungus Phanerochaete chrysosporium.

Hydrogen sulfide (H2S), an emerging gas transmitter, has been shown to be involved in multiple intracellular physiological and biochemical processes. In this study, the effects of hydrogen sulfide coupled with calcium on cadmium removal and resistance in Phanerochaete chrysosporium were examined. The results revealed that H2S enhanced the uptake of calcium by P. chrysosporium to resist cadmium stress. The removal and accumulation of cadmium by the mycelium was reduced by H2S and Ca2+ pretreatment. Moreover, oxidative damage and membrane integrity were alleviated by H2S and Ca2+. Corresponding antioxidative enzyme activities and glutathione were also found to positively respond to H2S and Ca2+, which played an important role in the resistance to cadmium-induced oxidative stress. The effects of hydroxylamine (HA; a hydrogen sulfide inhibitor) and ethylene glycol-bis-(2-aminoethylether)-N,N,N',N'-tetraacetic acid (EGTA; a calcium chelator) toward H2S and Ca2+ and their cross-interactions confirmed the positive roles and the potential crosstalk of H2S and Ca2+ in cadmium stress resistance. These findings imply that the protective effects of H2S in P. chrysosporium under cadmium stress may occur through a reduction in the accumulation of cadmium and promotion of the antioxidant system, and the H2S-regulated pathway may be associated with the intracellular calcium signaling system.Key points• Altered monoterpenoid tolerance mainly related to altered activity of efflux pumps.• Increased tolerance to geranic acid surprisingly caused by decreased export activity.• Reduction of export activity can be beneficial for biotechnological conversions.

Direct production of 2, 5-Furandicarboxylicacid from raw biomass by manganese dioxide catalysis cooperated with ultrasonic-assisted diluted acid pretreatment.

In recent years, 2, 5-furandicarboxylic acid (FDCA) has attracted much attention as the precursor of bio-polyester materials. A coupled process of ultrasonic-assisted dilute acid pretreatment and MnO2 was designed in this study to directly produce FDCA from lignocellulosic biomass, which is different from the traditional preparation process. Moreover, the critical parameters in the process were analyzed and optimized by the response surface method. The yield of FDCA could reach 52.1% under the optimal conditions. The reaction mechanism indicated that heavy metal elements in lignocellulosic biomass could play the role of the Lewis acid catalyst to promote the formation of FDCA to a certain extent. With the increase of temperature, the heavy metals transfer in biomass from the solid phase to the liquid phase increased, but most of them remain in the former. Therefore, further purification and treatment measures are worthy of attention.