Phage randomization in a charybdotoxin scaffold leads to CD4-mimetic recognition motifs that bind HIV-1 envelope through non-aromatic sequences.

Binding of HIV-1 gp120 to T-cell receptor CD4 initiates conformational changes in the viral envelope that trigger viral entry into host cells. Phage epitope randomization of a beta-turn loop of a charybdotoxin-based miniprotein scaffold was used to identify peptides that can bind gp120 and block the gp120-CD4 interaction. We describe here the display of the charybdotoxin scaffold on the filamentous phage fUSE5, its use to construct a beta-turn library, and miniprotein sequences identified through library panning with immobilized Env gp120. Competition enzyme-linked immunosorbent assay (ELISA) identified high-frequency phage selectants for which specific gp120 binding was competed by sCD4. Several of these selectants contain hydrophobic residues in place of the Phe that occurs in the gp120-binding beta-turns of both CD4 and previously identified scorpion toxin CD4 mimetics. One of these selectants, denoted TXM[24GQTL27], contains GQTL in place of the CD4 beta-turn sequence 40QGSF43. TXM[24GQTL27] peptide was prepared using solid-phase chemical synthesis, its binding to gp120 demonstrated by optical biosensor kinetics analysis and its affinity for the CD4 binding site of gp120 confirmed by competition ELISA. The results demonstrate that aromatic-less loop-containing CD4 recognition mimetics can be formed with detectable envelope protein binding within a beta-turn of the charybdotoxin miniprotein scaffold. The results of this work establish a methodology for phage display of a charybdotoxin miniprotein scaffold and point to the potential value of phage-based epitope randomization of this miniprotein for identifying novel CD4 mimetics. The latter are potentially useful in deconvoluting structural determinants of CD4-HIV envelope recognition and possibly in designing antagonists of viral entry.

From receptor recognition mechanisms to bioinspired mimetic antagonists in HIV-1/cell docking.

Understanding the ways in which two or more proteins interact may give insight into underlying binding and activation mechanisms in biology, methods for protein separation and structure-based antagonism. This review describes ways in which protein recognition has been explored in our laboratory for the HIV-1/cell entry process. Initial contact between an HIV-1 virion particle and a human cell occurs between gp120 (an HIV-1 envelope protein) and CD4 (a human extracellular signaling protein). This interaction leads to a sequence of events which includes a conformational change in gp120, fusion of the HIV-1 and cellular membranes and eventual infection of the cell. Using an optical biosensor and a reporter antibody, we have been able to measure the conformational change in gp120 that occurs upon CD4 binding. We also have used this biosensor system to characterize CD4 mimetics, obtained by peptide synthesis in miniprotein scaffolds. Phage display techniques have been employed to identify novel miniprotein sequences. The combination of biosensor interaction kinetics analysis and phage display provides a useful approach for understanding the recognition mechanisms involved in the HIV/cell docking process. This approach may also be useful in investigating other protein complexes of importance in health and disease.

Cleaved high molecular weight kininogen binds directly to the integrin CD11b/CD18 (Mac-1) and blocks adhesion to fibrinogen and ICAM-1.

High molecular weight kininogen (HK) and its cleaved form (HKa) have been shown to bind to neutrophils. Based on studies using monoclonal antibodies (mAbs), we postulated that CD11b/CD18 (Mac-1) might be the receptor on the neutrophils for binding to HK/HKa. However, the direct interaction of HK/HKa and Mac-1 had not been demonstrated. We therefore transfected HEK 293 cells with human Mac-1. Cell binding assays using fluorescein isothiocyanate-labeled HKa showed increased binding to the Mac-1 transfected cells compared with the control transfected cells. The binding was specific because unlabeled HKa, Mac-1-specific antibody, and fibrinogen can inhibit the binding of biotin-HKa to Mac-1 transfected cells. HKa bound to Mac-1 transfected cells (20 000 molecules/cell) with a K(d) = 62 nmol/L. To demonstrate directly the formation of a complex between HKa and Mac-1, we examined the interaction of HKa and purified Mac-1 in a cell-free system using an IAsys resonant mirror optical biosensor. The association and dissociation rate constants (k(on) and k(off), respectively) were determined, and they yielded a dissociation constant (K(d)) of 3.2x10(-9) mol/L. The functional significance of direct interaction of HKa to Mac-1 was investigated by examining the effect of HKa on cellular adhesion to fibrinogen and intercellular adhesion molecule-1 (ICAM-1), molecules abundant in the injured vessel wall. HKa blocked the adhesion of Mac-1 transfected cells to fibrinogen and ICAM-1 in a dose-dependent manner. Thus, HKa may interrupt Mac-1-mediated cell-extracellular matrix and cell-cell adhesive interactions and may therefore influence the recruitment of circulating neutrophils/monocytes to sites of vessel injury. (Blood. 2000;95:3788-3795)

Construction and binding kinetics of a soluble granulocyte-macrophage colony-stimulating factor receptor alpha-chain-Fc fusion protein.

Granulocyte-macrophage colony-stimulating factor (GM-CSF) activity is mediated by a cellular receptor (GM-CSFR) that is comprised of an alpha-chain (GM-CSFRalpha), which specifically binds GM-CSF, and a beta-chain (betac), shared with the interleukin-3 and interleukin-5 receptors. GM-CSFRalpha exists in both a transmembrane (tmGM-CSFRalpha) and a soluble form (sGM-CSFRalpha). We designed an sGM-CSFRalpha-Fc fusion protein to study GM-CSF interactions with the GM-CSFRalpha. The construct was prepared by fusing the coding region of the sGM-CSFRalpha with the CH2-CH3 regions of murine IgG2a. Purified sGM-CSFRalpha-Fc ran as a monomer of 60 kDa on reducing SDS-polyacrylamide gel electrophoresis but formed a trimer of 160-200 kDa under nonreducing conditions. The sGM-CSFRalpha-Fc bound specifically to GM-CSF as demonstrated by standard and competitive immunoassays, as well as by radioligand assay with 125I-GM-CSF. The sGM-CSFRalpha-Fc also inhibited GM-CSF-dependent cell growth and therein is a functional antagonist. Kinetics of sGM-CSFRalpha-Fc binding to GM-CSF were evaluated using an IAsys biosensor (Affinity Sensors, Paramus, NJ) with two assay systems. In the first, the sGM-CSFRalpha-Fc was bound to immobilized staphylococcal protein A on the biosensor surface, and binding kinetics of GM-CSF in solution were determined. This revealed a rapid koff of 2.43 x 10(-2)/s. A second set of experiments was performed with GM-CSF immobilized to the sensor surface and the sGM-CSFRalpha-Fc in solution. The dissociation rate constant (koff) for the sGM-CSFRalpha-Fc trimer from GM-CSF was 1.57 x 10(-3)/s, attributable to the higher avidity of binding in this assay. These data indicate rapid dissociation of GM-CSF from the sGM-CSFRalpha-Fc and suggest that in vivo, sGM-CSFRalpha may need to be present in the local environment of a responsive cell to exert its antagonist activity.

Kinetic analysis of a protein antigen-antibody interaction limited by mass transport on an optical biosensor.

Using BIAcore technology, we determined the rate constants for a protein antigen-antibody interaction that was mass transport limited on the optical biosensor. The antigen consisted of a soluble form of the human T-cell receptor CD4 (two amino terminal domains, D1D2) and the antibody was an anti-CD4 monoclonal from monkey engineered with the constant domains from human IgG1. High quality response data were obtained for this interaction by orienting the attachment of the antibody on the sensor surface and correcting for instrument artifacts with control experiments. Using numerical integration and global fitting, we demonstrate that a mass transport limited reaction was the only model of those tested that described well D1D2 binding to three different surface densities of the antibody. Statistical profiling techniques showed that the error space and correlation for the parameters in the non-linear model were essentially linear, but only when the model was simultaneously fitted to data from multiple surface densities. The "on" and "off" rate constants (1.2 x 10(-6) M-1 s-1 and 2.9 x 10(-4) s-1) determined from the kinetic analysis predict an equilibrium dissociation constant (KD = 0.24 +/- 0.01 nM) that agrees with the value measured in solution by titration calorimetry (KD = 0.2 +/- 0.1 nM). The results indicate that, although the D1D2-antibody reaction is partially controlled by mass transport on the optical biosensor, by optimizing the experimental design and analyzing data from multiple surface densities it is possible to determine accurate estimates of the intrinsic equilibrium and kinetic rate constants.

Kinetic and structural analysis of mutant CD4 receptors that are defective in HIV gp120 binding.

The T-cell antigen coreceptor CD4 also serves as the receptor for the envelope glycoprotein gp120 of HIV. Extensive mutational analysis of CD4 has implicated residues from a portion of the extracellular amino-terminal domain (D1) in gp120 binding. However, none of these proteins has been fully characterized biophysically, and thus the precise effects on molecular structure and binding interactions are unknown. In the present study, we produced soluble versions of three mutant CD4 molecules (F43V, G47S, and A55F) and characterized their structural properties, thermostability, and ability to bind gp120. Crystallographic and thermodynamic analysis showed minimal structural alterations in the F43V and G47S mutant proteins, which have solvent-exposed mutant side chains. In contrast, some degree of disorder appears to exist in the folded state of A55F, as a result of mutating a buried side chain. Real time kinetic measurements of the interaction of the mutant proteins with gp120 showed affinity decreases of 5-fold for G47S, 50-fold for A55F, and 200-fold for F43V. Although both rate constants for the binding reaction were affected by these mutations, the loss in affinity was mainly due to a decrease in on rates, with less drastic changes occurring in the off rates. These observations suggest the involvement of conformational adaptation in the CD4-gp120 interaction. Together, the structural and kinetic data confirm that F43V is a critical residue in gp120 recognition site, which may also include main chain interactions at residue Gly-47.

Identifying structure-function relationships in four-helix bundle cytokines: towards de novo mimetics design.

Many cytokines (growth-factor proteins) are constructed from a common four-helix bundle structural framework. Rapid advances have been made in relating the structure and function of a growing number of four-helix bundle cytokines. This understanding opens the way to design de novo mimetics through such strategies as cytokine hybrids, structure-excerpted scaffolds and contact residue topology mimics. These may provide leads for agonists and antagonists of cell growth and differentiation.

Molecular interaction analysis in ligand design using mass transport, kinetic and thermodynamic methods.

Ligand design in biotechnology is underpinned by the control of molecular affinity. Hence, measuring binding interactions is a key component in designing ligands for such uses as therapeutics, diagnostics, biomaterials and separation science. Mass transport, kinetic and thermodynamic methods have been used for macromolecular interaction analysis but also have potential applicability as direct methods for measuring small molecular interactions. They can enhance the ligand design process by providing the ability to choose ligands based on both their kinetic and thermodynamic binding properties.

Interdomain communication of T-cell CD4 studied by absorbance and fluorescence difference spectroscopy measurements of urea-induced unfolding.

CD4 is a transmembrane glycoprotein expressed on T-lymphocytes. It is a receptor for class II major histocompatibility complex (MHC) molecules and for the HIV envelope glycoprotein gp120. The extracellular portion of CD4 (sCD4) is a rod-shaped molecule consisting of four domains designated D1 through D4. Denaturant-induced unfolding of sCD4 and of isolated CD4 domains, D1D2 and D3D4, was measured using both ultraviolet absorbance and fluorescence difference spectroscopy. Though both absorbance and fluorescence changes arise from changes in the solvent exposure of the intrinsic tryptophan chromophores, the unfolding curves obtained with the two techniques looked very different for sCD4 and D3D4. This dissimilarity is indicative of a greater than two-state unfolding mechanism. The global three-state fit for sCD4, which simultaneously fit both absorbance and emission data to a model with one thermodynamically stable unfolding intermediate, was significantly better than the best two-state fit, suggesting that there are two unfolding regions. Unfolding of isolated D3D4 also fit a three-state model while unfolding of isolated D1D2 fit satisfactorily to a two-state model. The unfolding of these two isolated fragments could not be summed to yield the unfolding profile of sCD4, implying that an interaction between D2 and D3 is lost by splitting sCD4 between these domains. The unfolding data of isolated D1D2 and D3D4 were used with the solvent-accessible surface area of tryptophans calculated from atomic crystal structure coordinates of human D1D2 and rat D3D4 to assign the unfolding steps. The data are consistent with a model for sCD4 unfolding wherein the one stable intermediate appears to contain only the D4 domain unfolded. The remaining three domains apparently unfold as a unit. Furthermore, interactions between domains D1, D2, and D3 appear to stabilize D4, suggesting that stabilizing interactions exist between D3 and D4 even though the unfolding of the D3D4 fragment is best fit by a three-state model. This report is the first to describe a thermodynamic basis for a wide range of biological properties implicated for CD4.

Interpreting complex binding kinetics from optical biosensors: a comparison of analysis by linearization, the integrated rate equation, and numerical integration.

The binding kinetics recorded for many interactions using BIAcore and IAsys optical biosensors do not fit a simple bimolecular interaction model (A + B<-->AB). Three methods of analysis have been used to derive estimates for kinetic constants from such data:linearization, curve fitting using the integrated rate equation, and curve fitting using numerical integration. To test how well these methods could interpret complex binding kinetics, we generated and analyzed simulated data for two systems, one involving a two-state conformational change (A + B<-->AB<-->(AB)*) and a second involving surface heterogeneity (A + B<-->AB and A + B*<-->AB*). The linearization method assumed a simple bimolecular interaction and was inadequate at interpreting these systems as both produced complex kinetics in the association and dissociation phases. The sum of two integrated rate equations correctly modeled surface heterogeneity; but, when applied nonglobally, it fit the data from the conformational change system equally well and thus provided misleading results. Numerical integration allowed a choice of model for analysis and was therefore the only method capable of returning accurate estimates of rate constants for both complex systems. Global analysis, in combination with numerical integration, provided a stringent test of the assumed model. However, this stringency suggests that its application to experimental systems will require high-quality biosensor data.

Analysis of the interaction between human interleukin-5 and the soluble domain of its receptor using a surface plasmon resonance biosensor.

A surface plasmon resonance (SPR) biosensor was used to study the interaction of human interleukin-5 (hIL5) with its receptor. IL5 is a major growth factor in the production and activation of eosinophils. The receptor for IL5 is composed of two subunits, alpha and beta. The alpha subunit provides the specificity for IL5 and consists of an extracellular soluble domain, a single transmembrane region and a cytoplasmic tail. We expressed the soluble domain of the human IL5 receptor alpha subunit (shIL5R alpha) and human IL5 (hIL5) in Drosophila. Both hIL5 and shIL5R alpha were immobilized separately through amine groups onto the carboxylated dextran layer of sensor chips of the BIAcore (Pharmacia) SPR biosensor after N-hydroxysuccinimide/carbodiimide activation of the chip surface. Interactions were measured for the complementary macromolecule, either shIL5R alpha or hIL5, in solution. Kinetics of binding of soluble analyte to immobilized ligand were measured and from this the association rate constant, dissociation rate constant and equilibrium dissociation constant (Kd) were derived. With immobilized shIL5R alpha and soluble hIL5, the measured Kd was 2 nM. A similar value was obtained by titration calorimetry. The Kd for Drosophila expressed receptor and IL5 is higher than the values reported for proteins expressed in different systems, likely due to differences in the methods of interaction analysis used or differences in protein glycosylation. Receptor-IL5 binding was relatively pH independent between pH 6.5 and 9.5. Outside this range, the dissociation rate increased with comparatively little increase in association rate.(ABSTRACT TRUNCATED AT 250 WORDS)

Design and characterization of an intramolecular antiparallel coiled coil peptide.

A 56-residue polypeptide was designed to fold into a stable intramolecular antiparallel coiled coil, referred to as a coiled coil stem loop. The antiparallel orientation of the alpha-helices was dictated by the alignment of hydrophobic and ionic residues in the heptad repeat sequence (a, b, c, d, e, f, g)n. The hydrophobic core at the coiled coil interface was occupied by leucine and valine residues in heptad positions d and a' and positions a and d', respectively. The interface border positions e and g were occupied by glutamic acid in the amino-terminal helix and lysine residues in the carboxy-terminal helix. A loop segment connecting the alpha-helices began and ended with the helix-breaking residues glycine and proline. Alanine and serine residues were placed on the exposed b, c, and f positions of both helices to increase the helical propensity and solubility of the peptide, respectively. Several lines of evidence argued that the synthetic peptide made with this design folded into a stable monomeric coiled coil stem loop conformation: (1) the peptide was highly soluble in 150 mM sodium chloride and 50 mM sodium phosphate, pH 7.4; (2) the circular dichroism spectrum was alpha-helical but with relative ellipticity minima at 222 and 208 nm characteristic of a coiled coil structure: (3) the peptide exhibited an alpha-helical content near 80%, which was independent of peptide concentration and unchanged in the presence of trifluoroethanol; (4) size exclusion chromatography and sedimentation equilibrium ultracentrifuge measurements confirmed that the peptide was monomeric in aqueous solution; (5) the peptide exhibited high helical content over a wide pH range; (6) the apparent Tm for unfolding the alpha-helical structure was greater than 65 degrees C, and 3.0 M urea was required to reduce the helical structure by 50%; (7) a disulfide bond was readily formed in the monomer between the amino- and carboxy-terminal cysteine residues, confirming the antiparallel orientation of the helices; and (8) the peptide competed with fibrinogen for the GPIIbIIIa receptor indicating that the RGD residues present in the loop sequence were available for binding. This work establishes that an antiparallel alignment of alpha-helices can be achieved by designing specific hydrophobic and ionic interactions within the coiled coil. The prototype coiled coil peptide represents a sequence-simplified scaffold into which residues from alpha-helices and loops of native proteins can be inserted to form conformationally constrained mimetic recognition molecules.

Controlled formation of model homo- and heterodimer coiled coil polypeptides.

Sequence-simplified coiled coil polypeptides were synthesized and their folding properties characterized in order to define the role of charged border residues at the coiled coil interface for the controlled formation of homodimer and heterodimer structures. Three peptides were designed to form parallel coiled coils with valine and leucine occupying the hydrophobic interface positions a and d, respectively, of the heptad repeat abcdefg. The polypeptide designated E/K42, with the heptad repeat sequence VSSLESK, contained glutamate and lysine in the interface border positions e and g, respectively, and was designed to form a coiled coil homodimer at neutral pH. Two other polypeptides, designated E/E35 and K/K35, have the heptad repeats VSSLESE and VSSLKSK, respectively. E/E35 contains only glutamic acid at both e and g positions; K/K35, only lysine, E/E35 and K/K35 were designed to form a stable coiled coil heterodimer when combined at neutral pH. All three polypeptides were prepared by solid-phase synthesis and purified by reverse-phase high-performance liquid chromatography followed by size-exclusion chromatography. E/K42 formed a stable dimeric coiled coil structure as determined by circular dichroism and size-exclusion chromatography. The alpha-helical content of E/K42 was highest at neutral pH and decreased at extremes of pH. The alpha-helical structure of E/K42 at micromolar concentrations had a Tm of 62-65 degrees C and exhibited a concentration dependence of thermal denaturation consistent with dimer formation. In contrast to results with E/K42, a mixture of E/E35 and K/K35, but neither alone, forms alpha-helix at neutral pH.(ABSTRACT TRUNCATED AT 250 WORDS)

Making sense from antisense: a review of experimental data and developing ideas on sense--antisense peptide recognition.

Peptides encoded in the antisense strand of DNA have been predicted and found experimentally to bind to sense peptides and proteins with significant selectivity and affinity. Such sense--antisense peptide recognition has been observed in many systems, most often by detecting binding between immobilized and soluble interaction partners. Data obtained so far on sequence and solvent dependence of interaction support a hydrophobic-hydrophilic (amphipathic) model of peptide recognition. Nonetheless, the mechanistic understanding of this type of molecular recognition remains incomplete. Improving this understanding likely will require expanding the types of characteristics measured for sense--antisense peptide complexes and hence the types of analytical methods applied to such interactions. Understanding the mechanism of sense--antisense peptide recognition also may provide insights into mechanisms of native (sense) peptide and protein interactions and protein folding. Such insight may be helpful to learn how to design macromolecular recognition agents in technology for separation, diagnostics and therapeutics.

Effects of monomethoxypoly(ethylene glycol) modification of ribonuclease on antibody recognition, substrate accessibility and conformational stability.

The effects of modification of bovine pancreatic ribonuclease A by monomethoxypoly(ethylene glycol) (MPEG) were examined for changes in recognition by antiRNase antibodies, enzymatic activity against low and high molecular weight substrates and conformational stability to temperature elevation. Modified forms of RNase were prepared containing an average of 4, 9, and 11 mol of MPEG/mol protein, by amino group modification. These were analysed by binding to RNase antibodies crosslinked to solid phase-immobilized protein A. The affinity column was incorporated into a high performance liquid chromatograph and the RNase species were studied by both zonal and frontal analytical affinity chromatography. An antibody dissociation constant of 7.6 x 10(-8) M was found for unmodified RNase, as compared to values of 1.3 x 10(-7) and 1.2 x 10(-6) M for RNase with 4 and 9 covalently bound MPEG chains, respectively. Modification also led to progressive loss of enzymatic activity against RNA, down to 3% for the most highly modified enzyme. In contrast, enzymatic activity against cytidine-2',3'-cyclic monophosphate was suppressed to a maximum of only 33% at the highest modification level, and the stability to temperature, as followed by circular dichroism, was reduced only partially, from 67 degrees C for native protein to 57 degrees C for RNase with 11 mol equivalents MPEG incorporated. The above differential effects on enzymatic activity, antibody binding and temperature effects are consistent with the view that MPEG modification has relatively small effects on conformational stability and small molecule accessibility, but more dramatic effects on large molecule (substrate as well as antibody) accessibility.(ABSTRACT TRUNCATED AT 250 WORDS)

Antisense peptide recognition of sense peptides: sequence simplification and evaluation of forces underlying the interaction.

Structural principles were studied which underlie the recognition of sense peptides (sense DNA encoded) by synthetic peptides encoded in the corresponding antisense strand of DNA. The direct-readout antisense peptides corresponding to ribonuclease S-peptide bind to an affinity matrix containing immobilized S-peptide with significant selectivity and with dissociation constants in the range of 10(-6) M as judged by analytical affinity chromatography. Synthetic, sequence-modified forms of antisense peptides also exhibit substantial binding affinity, including a "scrambled" peptide in which the order of residue positions is changed while the overall residue composition is retained. The antisense mutants, as the original antisense peptides, bind at saturation with greater than 1:1 stoichiometry to immobilized S-peptide. The data suggest significant sequence degeneracy in the interaction of antisense with sense peptide. In contrast, selectivity was confirmed by the inability of several control peptides to bind to immobilized S-peptide. The idea was tested that the hydropathic pattern of the amino acid sequence serves to induce antisense peptide recognition. A hydropathically sequence-simplified mutant of antisense peptide was made in which all strongly hydrophilic (charged) residues were replaced by Lys, all strongly hydrophobic residues by Leu, and all weakly hydrophilic and hydrophobic residues by Ala, except Gly which was unchanged. This "KLAG" mutant also binds to immobilized S-peptide, with an affinity only an order of magnitude less than that with the original antisense peptide and with multiple stoichiometry. Mutants of the KLAG model, in which the hydropathic pattern was changed substantially, exhibited a lower binding affinity for S-peptide.(ABSTRACT TRUNCATED AT 250 WORDS)

Recognition properties of antisense peptides to Arg8-vasopressin/bovine neurophysin II biosynthetic precursor sequences.

We studied the interaction properties of synthetic antisense (AS) peptides encoded in the antisense strand of DNA corresponding to the N-terminal 20-residue sequence of the biosynthetic precursor of Arg8-vasopressin (AVP) and its binding protein bovine neurophysin II (BNPII). Binding affinities of sense polypeptides AVP and BNPII with AS peptides were measured by analytical affinity chromatography, in each case by the extent of chromatographic retardation of a soluble polypeptide interactor on an affinity matrix containing the other interactor as the immobilized species. Chromatographically calculated dissociation constants ranged from 10(-3) to 10(-6) M. Experiments were carried out to define the selectivity and underlying forces involved in the AS peptide interactions. For AS peptide elutions on sense peptide affinity supports, reduced binding affinity with increasing 1-propanol concentration and ionic strength suggested the presence of both ionic and hydrophobic contributions to AS peptide/immobilized sense peptide recognition. This same conclusion was reached with the antisense peptides as the immobilized species and measurement of elution of sequence-simplified, truncated, and charge-depleted forms of sense peptides. Immobilized AS 20-mer affinity matrix differentially retarded AVP versus oxytocin (OT) and BNPII versus BNPI (the neurophysin related biosynthetically to OT) and was used to separate these polypeptides from acid extracts of bovine posterior pituitaries. In addition, immobilized AS 12-mer corresponding to AVP-Gly-Lys-Arg could be used to separate AVP from OT. The results confirm that antisense peptides recognize sense peptides with significant selectivity in the AVP/BNPII precursor case.(ABSTRACT TRUNCATED AT 250 WORDS)

Sequence simplification and the intra- and intermolecular self-recognition properties of vasopressin/neurophysin biosynthetic precursor.

The self-assembly properties of the arginine 8-vasopressin/bovine neurophysin II (AVP/BNPII) biosynthetic precursor were studied using glycopeptide-deleted and sequence-redesigned semisynthetic derivatives. Semisynthetic precursors were prepared by chemically coupling synthetic vasopressinyl sequence domains and native protein-derived neurophysin II domain. Measurement of precursor-protein association by the extent of affinity chromatographic retardation on agarose-immobilized BNPII verified that the semisynthetic precursor with native AVP sequence has an enhanced self-association propensity similar to that predicted for native precursor. Here, the stabilizing contacts between hormone and neurophysin domains, mainly the positively charged protonated alpha-amino group and tyrosyl 2 side chain of the hormone, are retained. Semisynthetic precursor variants in which the hormone domain is sequence-simplified by introducing alanyl residues in positions not considered important for neurophysin recognition show non-reduced association to BNPII. In contrast, removal of one of the main contact elements between hormone and neurophysin by acetylation of the hormone alpha-amino group abolishes potentiation of precursor self-association. The results show that the presence of the C-terminal glycopeptide sequence domain of native vasopressin precursor is not required to promote self-assembly of the precursor. The data verify the view proposed for the oxytocinyl precursor that intramolecular domain interaction is the triggering event which promotes the increase in affinity of precursor self-association (intermolecular self-recognition). The data also define some of the intramolecular self-recognition elements in the folded precursor required for the high affinity intermolecular self-recognition.

Bioaffinity chromatography: synergy between interactive chromatography and molecular recognition for the separation and analysis of macromolecules.

Affinity chromatography, commonly regarded as an integral tool in macromolecular separation sciences, also provides an analytical method to study structure-function relationships of macromolecular interaction processes and to design recognition molecules. The latter, as found recently for the case of antisense peptides, may be useful as affinity agents in immobilized forms to effect new types of biomolecular separation.

Structural requirements of peptide hormone binding for peptide-potentiated self-association of bovine neurophysin II.

Site-specific, truncated, and sequence-simplified analogs of the hormone [Arg8]vasopressin were investigated for the relationship between their abilities to recognize immobilized bovine neurophysin and to promote neurophysin self-association. Peptide binding to neurophysin was measured quantitatively by analytical high performance affinity chromatography on immobilized bovine neurophysin II. Neurophysin self-association, measured as binding of soluble to immobilized neurophysin, was promoted (made higher affinity) by soluble peptide hormone and its analogs, with the effect of particular peptides being proportional to their binding affinities for neurophysin. Sequence-redesigned peptides able to recognize neurophysin, including dipeptide amides, were able to potentiate the self-association to the same extent as the natural hormone when tested at concentrations adjusted to effect equal degrees of saturation of neurophysin. The relationship between peptide affinity to neurophysin and the potentiation of self-association suggests that the latter is directly dependent on the former and can occur even with limited segments of hormone sequence. The data fit best to a model in which hormone binding and self-association surfaces of neurophysin are separate and linked through the neurophysin molecule to produce cooperativity (hormone-promoted self-association). Given that only limited structural elements of hormone are required for promoting self-association, the results fit less well with models in which cooperativity requires that hormone make dimer-stabilizing contacts with both self-associating subunits of neurophysin simultaneously.