Fluorine Incorporation for Enhanced Gas Separation Performance in Porous Organic Polymers: Investigating Reaction Pathways and Pore Structure Control.

The precise control of pore structures in porous organic polymer (POP) materials is of paramount importance in addressing a wide range of challenges associated with gas separation processes. In this study, we present a novel approach to optimize the gas separation performance of POPs through the introduction of fluorine groups and figure out an important factor of reaction decision that whether the AlCl3-catalyzed polymerization is Scholl reaction or Friedel-Crafts alkylation. In the chloroform system, the steric hindrance of function groups could make direct coupling between the benzene rings difficult, which would lead to part solvent knitting (Friedel-Crafts alkylation) instead. The fluorinated polymers show enhanced surface area and pore size characteristics. Notably, the fluorinated polymers exhibited significantly improved adsorption and separation performance for SF6, as evidenced by an ideal adsorbed solution theory selectivity (SF6/N2, v: v = 50:50, 273 K) increase of 75.0, 668.8, and 502.8% compared to the nonfluorinated POPs. These findings highlight the potential of fluorination as a strategy for tailoring the properties of POP materials for advanced gas separation applications.

Vanillin decorated chitosan as electrode material for sustainable energy storage.

Energy storage materials made from bioresources are crucial to fulfil the need for truly sustainable energy storage. In this work, vanillin, being a lignin-derived molecule, is coupled to chitosan, a biobased polymer backbone, and used as a redox active electrode material. The structure of those electrodes is highly defined, leading to better product security than in lignin based electrodes, which have been presented as sustainable electrodes in the past. With over 60% of saccharide units in chitosan functionalised by vanillin, the concentration of redox functionalities in the copolymer is significantly higher than in lignin materials. Composites with carbon black require no further binders or additives to be used as electrode material and show reversible charge storage up to 80 mA h g-1 (respective to the total electrode material) and good stability. Consequently, these electrodes are amongst the best performing electrodes made from regrown organic matter.

A comparison of spacer on water-soluble cyclodextrin grafted chitosan inclusion complex as carrier of eugenol to mucosae.

In this study two types of water-soluble ßCD grafted chitosan were synthesized and compared based on similar degree of N-substitution of ßCD moiety; QCD23-g-CS contained methylene spacer and QCDCA22-g-CS contained citric acid spacer. The QCD23-g-CS demonstrated greater eugenol (EG) encapsulation efficiency than that of QCDCA22-g-CS. The micelle-like assemblies of QCD23-g-CS led to slower release of EG while it did not observe in case of QCDCA22-g-CS. It was found that EG could absorb on chitosan backbone according to in silico modeling. Cytotoxicity of both derivatives against buccal mucosa cell is concentration-dependent. The QCDCA22-g-CS demonstrated stronger mucoadhesive response than that of QCD23-g-CS, due to hydrogen bonding according to mucin particle and SPR methods. Our results revealed that the spacer on both derivatives played an important role on binding affinity with EG, releasing profile and mucoadhesive property. These derivatives could be considered as promising carriers for mucosal delivery system.

The PEI-introduced CS shell/PMMA core nanoparticle for silencing the expression of E6/E7 oncogenes in human cervical cells.

In this study, we examined the potential of cationic nanoparticle - polyethyleneimine-introduced chitosan shell/poly (methyl methacrylate) core nanoparticles (CS-PEI) for siRNA delivery. Initially, DNA delivery was performed to validate the capability of CS-PEI for gene delivery in the human cervical cancer cell line, SiHa. siRNA delivery were subsequently carried out to evaluate the silencing effect on targeted E6 and E7 oncogenes. Physicochemical properties including size, zeta potential and morphology of CS-PEI/DNA and CS-PEI/siRNA complexes, were analyzed. The surface charges and sizes of the complexes were observed at different N/P ratios. The hydrodynamic sizes of the CS-PEI/DNA and CS-PEI/siRNA were approximately 300-400 and 400-500nm, respectively. Complexes were positively charged depending on the amount of added CS-PEI. AFM images revealed the mono-dispersed and spherical shapes of the complexes. Gel retardation assay confirmed that CS-PEI nanoparticles completely formed complexes with DNA and siRNA at a N/P ratio of 1.6. For DNA transfection, CS-PEI provided the highest transfection result. Localization of siRNA delivered through CS-PEI was confirmed by differential interference contrast (DIC) confocal imaging. The silencing effect of siRNA specific to HPV 16 E6/E7 oncogene was examined at 18 and 24h post-transfection. The results demonstrated the capacity of CS-PEI to suppress the expression of HVP oncogenes.

Acceleration of gene transfection efficiency in neuroblastoma cells through polyethyleneimine/poly(methyl methacrylate) core-shell magnetic nanoparticles.

BACKGROUND: The purpose of this study was to demonstrate the potential of magnetic poly(methyl methacrylate) (PMMA) core/polyethyleneimine (PEI) shell (mag-PEI) nanoparticles, which possess high saturation magnetization for gene delivery. By using mag-PEI nanoparticles as a gene carrier, this study focused on evaluation of transfection efficiency under magnetic induction. The potential role of this newly synthesized nanosphere for therapeutic delivery of the tryptophan hydroxylase-2 (TPH-2) gene was also investigated in cultured neuronal LAN-5 cells. METHODS: The mag-PEI nanoparticles were prepared by one-step emulsifier-free emulsion polymerization, generating highly loaded and monodispersed magnetic polymeric nanoparticles bearing an amine group. The physicochemical properties of the mag-PEI nanoparticles and DNA-bound mag-PEI nanoparticles were investigated using the gel retardation assay, atomic force microscopy, and zeta size measurements. The gene transfection efficiencies of mag-PEI nanoparticles were evaluated at different transfection times. Confocal laser scanning microscopy confirmed intracellular uptake of the magnetoplex. The optimal conditions for transfection of TPH-2 were selected for therapeutic gene transfection. We isolated the TPH-2 gene from the total RNA of the human medulla oblongata and cloned it into an expression vector. The plasmid containing TPH-2 was subsequently bound onto the surfaces of the mag-PEI nanoparticles via electrostatic interaction. Finally, the mag-PEI nanoparticle magnetoplex was delivered into LAN-5 cells. Reverse-transcriptase polymerase chain reaction was performed to evaluate TPH-2 expression in a quantitative manner. RESULTS: The study demonstrated the role of newly synthesized high-magnetization mag-PEI nanoparticles for gene transfection in vitro. The expression signals of a model gene, luciferase, and a therapeutic gene, TPH-2, were enhanced under magnetic-assisted transfection. An in vitro study in neuronal cells confirmed that using mag-PEI nanoparticles as a DNA carrier for gene delivery provided high transfection efficiency with low cytotoxicity. CONCLUSION: The mag-PEI nanoparticle is a promising alternative gene transfection reagent due to its ease of use, effectiveness, and low cellular toxicity. The mag-PEI nanoparticle is not only practical for gene transfection in cultured neuronal cells but may also be suitable for transfection in other cells as well.

Self-aggregates formation and mucoadhesive property of water-soluble ß-cyclodextrin grafted with chitosan.

Water-soluble ß-cyclodextrin grafted with chitosan (CD-g-CS) was carried out by quaternizing the CD-g-CS with glycidyltrimethyl ammonium chloride (GTMAC) under mild acidic condition, corresponding to the quaternized CD-g-CS (QCD-g-CS). The degrees of substitution (DS) and quaternization (DQ), ranging from 5% to 23% and 66% to 80%, respectively, were determined by (1)H NMR spectroscopy. Self-aggregates formation of all QCD-g-CSs were investigated in water using dynamic light scattering (DLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM) techniques. The result revealed that all QCD-g-CSs are able to form self-aggregates in water. Large particle sizes ranged from 800 to 3000nm were obtained by DLS while zeta-potentials were ranging from 25 to 40mV. AFM and TEM depicted a spherical shape with particle sizes ranging from 100 to 900nm. Mucoadhesive and cytotoxic properties of all QCD-g-CSs were evaluated using a mucin particle method and MTT assay compared to quaternized chitosan (QCS). It was found that the mucoadhesive property increased with decreasing DS due to less quaternary ammonium moiety into the chitosan backbone. On the other hand, the cytotoxicity increased with increasing DS even though the DQ is decreased.

Preparation of anti-CD4 monoclonal antibody-conjugated magnetic poly(glycidyl methacrylate) particles and their application on CD4+ lymphocyte separation.

Novel immunomagnetic particles have been prepared for separation of CD4(+) lymphocytes. The magnetic nanoparticles with a diameter of approximately 5-6 nm were first synthesized by co-precipitation from ferrous and ferric iron solutions and subsequently encapsulated with poly(glycidyl methacrylate) (PGMA) by precipitation polymerization. Monoclonal antibody specific to CD4 molecules expressed on CD4(+) lymphocytes was conjugated to the surface of magnetic PGMA particles through covalent bonding between epoxide functional groups on the particle surface and primary amine groups of the antibodies. The generated immunomagnetic particles have successfully separated CD4(+) lymphocytes from whole blood with over 95% purity. The results indicated that these particles can be employed for cell separation and provide a strong potential to be applied in various biomedical applications including diagnosis, and monitoring of human diseases.

Preparation of iron oxide-entrapped chitosan nanoparticles for stem cell labeling.

This study intended to prepare iron oxide nanoparticle-entrapped chitosan (CS) nanoparticles for stem cell labeling. The nanoparticles were synthesized by polymerizing iron oxide nanoparticle-associated methacrylic acid monomer in the presence of CS. TEM revealed that the well-defined iron oxide nanoparticles were successfully encapsulated inside the CS nanoparticles. The effect of CS at different [NH(2)]/[COOH] molar ratios on particle size, surface charge, thermal stability and magnetic properties was determined systematically. Internalization and localization of the coated nanoparticles were evaluated by atomic absorption spectrometry and confocal laser scanning microscopy. The Kusa O cell line was chosen as a stem cell model. Interestingly, the uptake of iron oxide-entrapped CS nanoparticles was remarkably enhanced under magnetization and the nanoparticles were mostly located inside cellular compartments. It can be concluded that the iron oxide-entrapped CS nanoparticles have a strong potential for stem cell labeling.