Potential environmental impact of mycelium composites on African communities.

The ecological and economic benefits of mycelium composites offer a promising opportunity for supporting sustainable development in Africa. This study focuses on assessing the environmental impact of mycelium composites for building and construction (MCBs) by conducting a life cycle assessment (LCA) in the context of Africa. It is demonstrated that the potential environmental impact of MCBs is substantially influenced by the use and source of electrical power for autoclaves, incubators, and ovens, making the culturing and post-processing phases the major environmental hotspots. The impact of MCB production is also relative to the energy mix of specific countries, being higher in countries that rely on fossil fuel energy (e.g., South Africa) and lower in those that rely more on renewable sources (e.g., Democratic Republic of the Congo, DRC). Furthermore, the impact of MCB production is found to be sensitive to travel distance, suggesting that situating production facilities closer to agricultural, agro-industrial, and/or forestry waste sources could be more beneficial than interregional sourcing, for example. It is also demonstrated that MCBs have the potential to be a more ecologically sustainable alternative to some conventional construction materials (e.g., concrete) over an entire life cycle. Based on the insights obtained from this LCA, some recommendations have been proposed to address potential environmental repercussions pre-emptively and proactively: this is particularly important for nations, mainly in the Global South, that exhibit low resilience to climate change due to limited economic resources. Furthermore, with the rapid expansion of mycelium composite technology, there is a need to increase awareness about its potential environmental impact and, ultimately, to mitigate its potential contribution to pressing environmental concerns (e.g., global warming and climate change). Consequently, this study also adds to the existing body of literature on LCA studies, delineating key factors for consideration in future LCA studies and providing guidance for the sustainable establishment and expansion of this technology.

Early Damage Detection in Composites during Fabrication and Mechanical Testing.

Fully integrated monitoring systems have shown promise in improving confidence in composite materials while reducing lifecycle costs. A distributed optical fibre sensor is embedded in a fibre reinforced composite laminate, to give three sensing regions at different levels through-the-thickness of the plate. This study follows the resin infusion process during fabrication of the composite, monitoring the development of strain in-situ and in real time, and to gain better understanding of the resin rheology during curing. Piezoelectric wafer active sensors and electrical strain gauges are bonded to the plate after fabrication. This is followed by progressive loading/unloading cycles of mechanical four point bending. The strain values obtained from the optical fibre are in good agreement with strain data collected by surface mounted strain gauges, while the sensing regions clearly indicate the development of compressive, neutral, and tensile strain. Acoustic emission event detection suggests the formation of matrix (resin) cracks, with measured damage event amplitudes in agreement with values reported in published literature on the subject. The Felicity ratio for each subsequent loading cycle is calculated to track the progression of damage in the material. The methodology developed here can be used to follow the full life cycle of a composite structure, from manufacture to end-of-life.