ABSTRACT
Water-borne phosphine-functionalized core-cross-linked micelles (CCM) consisting of a hydrophobic core and a hydrophilic shell were obtained as stable latexes by reversible addition-fragmentation chain transfer (RAFT) in water in a one-pot, three-step process. Initial homogeneous aqueous-phase copolymerization of methacrylic acid (MAA) and poly(ethylene oxide) methyl ether methacrylate (PEOMA) is followed by copolymerization of styrene (S) and 4-diphenylphosphinostyrene (DPPS), yielding P(MAA-co-PEOMA)-b-P(S-co-DPPS) amphiphilic block copolymer micelles (M) by polymerization-induced self-assembly (PISA), and final micellar cross-linking with a mixture of S and diethylene glycol dimethacrylate. The CCM were characterized by dynamic light scattering and NMR spectroscopy to evaluate size, dispersity, stability, and the swelling ability of various organic substrates. Coordination of [Rh(acac)(CO)2 ] (acac=acetylacetonate) to the core-confined phosphine groups was rapid and quantitative. The CCM and M latexes were then used, in combination with [Rh(acac)(CO)2 ], to catalyze the aqueous biphasic hydroformylation of 1-octene, in which they showed high activity, recyclability, protection of the activated Rh center by the polymer scaffold, and low Rh leaching. The CCM latex gave slightly lower catalytic activity but significantly less Rh leaching than the M latex. A control experiment conducted in the presence of the sulfoxantphos ligand pointed to the action of the CCM as catalytic nanoreactors with substrate and product transport into and out of the polymer core, rather than as a surfactant in interfacial catalysis.
ABSTRACT
The aim of this work is to present a method based on asymmetric flow-field-flow-fractionation coupled on-line to a static light scattering (AF4-UV-SLS) detector to characterize self-assembled nanofibers (NFs). The method developed herein allows the determination of both the length distribution of the NFs as well as the distribution in terms of aggregation number per unit length (Agg). Given the remaining synthetic challenges of better controlling the structural homogeneity and particle dimensions, the NF length and aggregation number per unit length are becoming essential for the improvement and control of their chemical processes and a better understanding of their properties. The results obtained with this AF4-UV-SLS method indicate that a well-resolved NF length distribution characterization and Agg determination were attained. These results provide critical information concerning the physical properties of the investigated NFs and open the door to the characterization of new self-assembled polymers with various asymmetrical architectures.
Subject(s)
Nanofibers/chemistry , Polymers/chemistry , Suspensions/analysis , Water/chemistry , Emulsions/chemistry , Polymerization , Polymers/chemical synthesisABSTRACT
Charging of nanoparticles through electrospray has scarcely been explored. Spherical nanometer-sized amphiphilic block copolymer nanoparticles with diameters ranging from â¼65 to â¼150 nm were electrosprayed and analysed by charge detection spectrometry. Herein, we explore the charging of these micellar nano-objects by conducting a thorough study in different solvents, including pure water, and upon the addition of "supercharging" agents. The charge (z) of micellar nanoparticles electrosprayed from water solution is compared to the Rayleigh's limiting charge (z(R)) of a charged water droplet of the same dimensions. An average ratio (z/z(R)) of 0.6-0.65 is observed for the micellar macro-ions, supporting the charge residue mechanism, where the number of charges available to the micellar macro-ion is limited by the number of charges on the nanodroplet, which is a function of the surface tension of the solvent. Also we show the possibility of increasing the charging of micellar nanoparticles in the negative mode by adding organic bases (in particular piperidine) to water/methanol solutions.
ABSTRACT
The self-assembly in water of an amphiphilic P(nBMA(50%) -stat-DMAEMA(50%) )(100)-b-PDMAEMA(235) diblock copolymer based on hydrophilic dimethylaminoethylmethacrylate (DMAEMA) units and hydrophobic n-butylmethacrylate (nBMA) ones is reported. DMAEMA units have been incorporated into the hydrophobic block of this copolymer to moderate its hydrophobic character. Light scattering experiments revealed the formation of micelles whose apparent aggregation number varied reversibly with the ionization degree of the DMAEMA units. Incorporating hydrophilic units into the hydrophobic block of an amphiphilic block copolymer is thus a way to generate dynamic aggregates in aqueous medium. As this strategy was also successful using other types of hydrophilic units, we believe it to be universal.
Subject(s)
Methacrylates/chemistry , Polymethacrylic Acids/chemistry , Surface-Active Agents/chemistry , Anisoles/chemistry , Hydrogen-Ion Concentration , Hydrophobic and Hydrophilic Interactions , Light , Methacrylates/chemical synthesis , Micelles , Particle Size , Polymerization , Polymethacrylic Acids/chemical synthesis , Scattering, Radiation , Sodium Chloride/chemistry , Solvents/chemistry , Surface-Active Agents/chemical synthesisABSTRACT
Water-soluble macroalkoxyamines are shown to be particularly well-suited initiators for nitroxide-mediated emulsion polymerization. They lead to the synthesis of amphiphilic block copolymers that self-assemble in situ into well-defined nanoobject morphologies, in agreement with the principles of polymerization-induced micellization. Depending on the molar mass of the hydrophobic block, the formed nanoparticles are hairy spherical micelles, nanofibers, or vesicles. The nanofibers are the most intriguing and spectacular structure and strongly affect the physicochemical properties of the aqueous dispersions.
ABSTRACT
Charge detection mass spectrometry (CD-MS) combined with electrospray ionization was used to determine, in a direct way and for the first time, the molar mass of self-assembled amphiphilic block copolymer nanoobjects prepared via living radical emulsion polymerization. CD-MS supplies enough data for calculating statistically significant measurements of the mass of particles in the megadalton to gigadalton range and their resulting mass distribution.
ABSTRACT
The syntheses of amphiphilic block copolymers are successfully performed in water by chain extension of hydrophilic macromolecules with styrene at 80 °C. The employed strategy is a one-pot procedure in which poly(acrylic acid), poly(methacrylic acid) or poly(methacrylic acid-co-poly(ethylene oxide) methyl ether methacrylate) macroRAFTs are first formed in water using 4-cyano-4-thiothiopropylsulfanyl pentanoic acid (CTPPA) as a chain transfer agent. The resulting macroRAFTs are then directly used without further purification for the RAFT polymerization of styrene in water in the same reactor. This simple and straightforward strategy leads to a very good control of the resulting amphiphilic block copolymers.
Subject(s)
Polymers/chemical synthesis , Acrylates/chemistry , Hydrophobic and Hydrophilic Interactions , Methacrylates/chemistry , Polymerization , Polymers/chemistry , Styrene/chemistryABSTRACT
Water-soluble and fluorescent core-shell nanoparticles (FNP) are synthesized in a miniemulsion reversible addition-fragmentation transfer (RAFT) polymerization and are shown to respond to pH. The particles are obtained from a hydrophilic PEO-b-PAA macromolecular RAFT agent which is block-extended with styrene and a fluorescent BODIPY monomer. A miniemulsion is then formed with the residual hydrophobic monomers. After completion of the polymerization, FNP of ≈ 60 nm in diameter are obtained. The fluorescence of the BODIPY dye in the particles is found to remain (0.2 quantum yield). The particles can be precipitated in acidic pH and redispersed upon addition of base without loss of their integrity or noticeable rearrangement.
Subject(s)
Nanoparticles/chemistry , Polymers/chemical synthesis , Acrylic Resins/chemistry , Ethylene Oxide/chemistry , Fluorescence , Polymerization , Polymers/chemistry , Polystyrenes/chemistryABSTRACT
In this article, we report the formation of micelles from a tetrathiafulvalene (TTF) end-functionalized poly(N-isopropylacrylamide) (poly(NIPAM)) derivative (1). We have determined the critical aggregation concentration (CAC) and average diameter of the micelles using fluorescence spectroscopy and dynamic light scattering experiments, respectively. We have exploited the NIPAM backbone of the polymer to thermally transform the swollen hydrophilic poly(NIPAM) derivative to a more globular hydrophobic state at the lower critical solution temperature (LCST). Finally, we have shown that we can exploit the chemical oxidation and complexation properties of the TTF unit to disrupt the micelle architecture to release the hydrophobic dye Nile Red from the interior of the micelle.
Subject(s)
Acrylamides/chemistry , Heterocyclic Compounds/chemistry , Polymers/chemistry , Acrylic Resins , Fluorescent Dyes/chemistry , Micelles , Models, Molecular , Molecular Structure , Oxazines/chemistry , Oxidation-Reduction , Particle Size , Spectrometry, Fluorescence , Surface Properties , TemperatureABSTRACT
The free-radical dispersion polymerization of methyl acrylate (MA) in isododecane was carried out in the presence of a poly(2-ethylhexyl acrylate) macromolecular RAFT (reversible addition-fragmentation chain transfer) agent bearing a trithiocarbonate reactive group in the middle of the chain (P2EHA-TTC). The presence of the trithiocarbonate function was crucial for the synthesis of monodisperse colloidal poly(methyl acrylate) (PMA) particles stabilized by the P2EHA segments. The hydrodynamic diameters ranged from 100 to 300 nm, using particularly low amounts of the macro(RAFT agent) (1-6 wt % vs. MA) in dispersion polymerizations carried out at 20 wt % solids content. As shown by 2D liquid chromatography, P2EHA-b-PMA or P2EHA-b-PMA-b-P2EHA block copolymers formed in situ at the early stage of the dispersion polymerization due to the reversible transfer process and played the role of particle stabilizer. The glass-transition temperature of the derived polymer films was not affected by the low amount of the chosen macromolecular stabilizer and the mechanical properties were mainly those of PMA, which makes the technique very attractive for coating applications.
ABSTRACT
Self-assembled block copolymer nanofibers are attractive materials for multiple applications. We propose here a novel, very simple and straightforward method to prepare polymeric nanofibers at high solids contents directly in water. It is based on an aqueous emulsion polymerization process performed under living radical polymerization conditions, using the RAFT method.
ABSTRACT
We describe the application of the LCST of a naphthalene-functionalised polyNIPAM derivative as a convenient, tuneable and reversible method to disrupt complex formation with CBPQT(4+) in water.
ABSTRACT
Polymerization-induced formation of amphiphilic diblock copolymer vesicles is performed in water at high concentrations by a single-step nitroxide-mediated controlled free-radical emulsion polymerization of 4-vinylpyridine, initiated by a water-soluble poly(sodium acrylate) macroalkoxyamine at alkaline pH.
Subject(s)
Acrylic Resins/chemistry , Nanostructures/chemistry , Pyridines/chemistry , Water/chemistry , Drug Carriers/chemistry , Hydrogen-Ion Concentration , Nanostructures/ultrastructure , Particle SizeABSTRACT
Chain transfer to polymer (CTP) in conventional free-radical polymerizations (FRPs) and controlled radical polymerizations (ATRP, RAFT and NMP) of n-butyl acrylate (BA) has been investigated using (13) C NMR measurements of branching in the poly(n-butyl acrylate) produced. The mol-% branches are reduced significantly in the controlled radical polymerizations as compared to conventional FRPs. Several possible explanations for this observation are discussed critically and all except one refuted. The observations are explained in terms of differences in the concentration of highly reactive short-chain radicals which can be expected to undergo both intra- and inter-molecular CTP at much higher rates than long-chain radicals. In conventional FRP, the distribution of radical concentrations is broad and there always is present a significant proportion of short-chain radicals, whereas in controlled radical polymerizations, the distribution is narrow with only a small proportion of short-chain radicals which diminishes as the living chains grow. Hence, irrespective of the type of control, controlled radical polymerizations give rise to lower levels of branching, when performed under otherwise similar conditions to conventional FRP. Similar observations are expected for other acrylates and monomers that undergo chain transfer to polymer during radical polymerization.
ABSTRACT
Monodisperse spherical hollow nanoparticles of mesoporous silica featuring mesopores with a radial orientation in the silica shell were synthesized via a dual-templating method. Specifically designed polystyrene latexes with anionic or cationic surface charges acted as the core templates, while cetyltrimethylammonium bromide served as a co-template to structure the mesopore formation during tetraethoxysilane hydrolysis/condensation. The particles were well-separated and presented homogeneous mesoporous silica shells. Average particle diameters were less than 200 nm, and the particles displayed high values of specific surface area and pore volume. The shell thickness and the hollow core diameter could be tuned independently while the radial pore structure was preserved. A detailed analysis of the nitrogen adsorption-desorption isotherms proved that the central cavity was completely isolated from the external medium, that is, only accessible through the radial mesopores of the shell. Consequently, our particles gather the advantages of a well-defined structure, straight penetrating channels across the silica shell, and a high accessible porous volume of the central core. These properties make them far better candidates than simple mesoporous particles for any storage and/or controlled release applications.
ABSTRACT
This communication describes the first example of the efficient use of a simple amphiphilic molecule as both a surfactant and an initiator in the miniemulsion polymerization of methyl methacrylate under AGET and ARGET ATRP conditions.
ABSTRACT
Size-exclusion chromatography (SEC) separates polymers by hydrodynamic volume (the universal calibration principle). Molecular weights can be determined using viscometry (relying on universal calibration) and light scattering (independent of universal calibration). In the case of complex branched polyacrylates with tetrahydrofuran as eluent, universal calibration is valid, although the separation in term of molecular weight is incomplete: a given elution slice contains a range of molecular weights, described in terms of a 'local polydispersity'. The local polydispersity index decreases when the number of branches per chain increases and complete separation is reached for highly branched chains.
Subject(s)
Chromatography, Gel/methods , Polymers/isolation & purification , Molecular WeightABSTRACT
The simple, one step synthesis of aqueous suspensions of amphiphilic nanoparticles is presented. Those particles are prepared in the batch heterophase polymerization of styrene or -butyl acrylate, using a water-soluble poly(sodium acrylate) alkoxyamine macroinitiator. The nitroxide-mediated controlled growth of the hydrophobic block leads to the formation of poly(sodium acrylate)--polystyrene or poly(sodium acrylate)--poly(-butyl acrylate) amphiphilic diblock copolymers, able to self-assemble in water simultaneously to the growth step. When the diblock copolymers become strongly asymmetrical, with a short poly(sodium acrylate) block and a long hydrophobic one, the formed hairy nanoparticles are analogous to amphiphilic diblock copolymer crew-cut micelles.
ABSTRACT
This paper reports on the preparation of poly(methyl methacrylate) (PMMA), poly(n-butyl acrylate) (PBA), and polystyrene (PS) brushes at the surface of conducting materials that were modified by the electrochemical reduction of a brominated aryl diazonium salt BF4-, +N2-C6H4-CH(CH3)-Br (D1). The grafted organic species -C6H4-CH(CH3)-Br was found to be very effective in initiating atom transfer radical polymerization (ATRP) of vinyl monomers. This novel approach combining diazonium salts and ATRP allowed PMMA, PBA, and PS brushes to be grown from the surface of iron electrodes. The polymer films were characterized in terms of their chemical structure by infrared reflection absorption spectroscopy and X-ray photoelectron spectroscopy. Atomic force microscopy studies indicated that the polymer brushes are densely packed. Contact angle measurements of water drops on PS and PMMA brushes were 88.1 +/- 2.0 and 70.3 +/- 2.1 degrees, respectively, which is consistent with the published wettability data for the corresponding polymer sheets.
ABSTRACT
The miniemulsion polymerization of styrene has been carried out using two pH-responsive cationic diblock macromonomers as reactive stabilizers. As a comparison, the analogous nonpolymerizable cationic diblock copolymer was also investigated. Each of these three stabilizers based on 2-(diethylaminoethyl)methacrylate and quaternized 2-(dimethylaminoethyl)methacrylate residues were prepared via oxyanionic polymerization and had relatively low polydispersities. It was found that all three copolymers were grafted to the polystyrene latex particles, as judged by X-ray photoelectron spectroscopy, aqueous electrophoresis and FTIR spectroscopy studies. Kinetics studies and colloidal characteristics indicated poorer stabilization properties of the partially quaternized diblock macromonomer and electron microscopy confirmed that the latexes invariably had relatively broad particle size distributions.