Influence of force volume indentation parameters and processing method in wood cell walls nanomechanical studies.

Since the established correlations between mechanical properties of a piece of wood at the macroscopic scale and those of the cell wall at the submicron scale, techniques based on atomic force microscopy (AFM) have become widespread. In particular Peak Force tapping, allowing the differentiation of various layers, has become the new standard for wood cell wall's nanomechanical characterization. However, its use requires fully elastic indentation, a good knowledge of stiffness of the probe and assumes a perfect tip shape of known radius (sphere) or angle (cone). Those strong hypotheses can result in large approximations in the extracted parameters for complex, nanostructured, and stiff and viscous materials such as wood. In this work, we propose a reliable and complementary alternative based on AFM force-volume indentation by refining the Oliver and Pharr nanoindentation processing and calibration procedure for AFM cantilever and tip. The introduced area-function calibration (AFC) method allows to considerably reduce these approximations and provides semi-quantitative measurements. No prior knowledge of the tip shape and cantilever stiffness are required and viscoplasticity is investigated through a qualitative index. Indentation parameters variations are shown to impact the resulting measurements, i.e., indentation modulus, viscoplasticity index, adhesion force and energy. AFC method, applied to map regions of tension wood, provides very stable mechanical parameters characteristic of each region, which makes this method of high interest for plant cell wall studies.

Nanomechanics and Raman Spectroscopy of in Situ Native Carbohydrate Storage Granules for Enhancing Starch Quality and Lignocellulosic Biomass Production.

Alternative energy strategies based on plant biomass-derived bioenergy and biofuels rely on understanding and optimization of plant structure, chemistry, and performance. Starch, a constitutive element of all green plants, is important to food, biofuels, and industrial applications. Models of carbohydrate storage granules are highly heterogeneous in representing morphology and structure, though a deeper understanding of the role of structure in functional behavior is emerging. A better understanding of the in situ nanoscale properties of native granules is needed to help improve the starch quality in food crops as well as optimize lignocellulosic biomass production in perennial nonfood crops. Here, we present a new technique called soft mechanical nano-ablation (sMNA) for accessing the interior of the granules without compromising the inner nanostructure. We then explore the nanomechanics of granules within the ray parenchyma cells of Populus xylem, a desirable woody biofuel feedstock. The employed soft outer layer nanoablation and atomic force microscopy reveal that the inner structure comprises 156 nm blocklets arranged in a semicrystalline organization. The nanomechanical properties of the inner and outer structures of a single starch granule are measured and found to exhibit large variations, changing by a factor of 3 in Young's modulus and a factor of 2 in viscoplastic index. These findings demonstrate how the introduced approach facilitates studies of structure-function relationships among starch granules and more complex secondary cell wall features as they relate to plant performance.

Novel and Innovative Interface as Potential Active Layer in Chem-FET Sensor Devices for the Specific Sensing of Cs.

An innovative novel interface has been designed and developed to be used as a potential active layer in chemically sensitive field-effect transistor (Chem-FET) sensor devices for the specific sensing of Cs+. In this study, the synthesis of a specific Cs+ probe based on calix[4]arene benzocrown ether, its photophysical properties, and its grafting onto a single lipid monolayer (SLM) recently used as an efficient ultrathin organic dielectric in Chem-FETs are reported simultaneously. On the basis of both optical and NMR titration experiments, the probe has shown high selectivity and specificity for Cs+ compared to interfering cations, even if an admixture is used. Additionally, Attenuated Total Reflectance Fourier Transform Infra Red (ATR-FTIR) spectroscopy was successfully used to characterize and prove the efficient grafting of the probe onto a SLM and the formation of the innovative novel sensing layer.

Subpicomolar Iron Sensing Platform Based on Functional Lipid Monolayer Microarrays.

We report herein the fabrication of novel microarrays based on air-stable functional lipid monolayers over silicon using a combination of e-beam lithography and lift-off. We demonstrate these microarrays can be use as ultrasensitive platform for Kelvin probe force microscopy in sensing experiments. Specificity of the detection is given by the functional group grafted at the lipid headgroup. The arrays developed for the detection of ferric ions, Fe(3+), using a γ-pyrone derivative chelator, demonstrate subpicomolar limit of detection with high specificity. In addition, the technique takes advantage of the structure of the array with the silicon areas playing the role of reference for the measurement, and we determine critical pattern dimensions below which the probe size/shape impacts the measured results.

A field effect transistor biosensor with a γ-pyrone derivative engineered lipid-sensing layer for ultrasensitive Fe3+ ion detection with low pH interference.

Field effect transistors have risen as one of the most promising techniques in the development of biomedical diagnosis and monitoring. In such devices, the sensitivity and specificity of the sensor rely on the properties of the active sensing layer (gate dielectric and probe layer). We propose here a new type of transistor developed for the detection of Fe(3+) ions in which this sensing layer is made of a monolayer of lipids, engineered in such a way that it is not sensitive to pH in the acidic range, therefore making the device perfectly suitable for biomedical diagnosis. Probes are γ-pyrone derivatives that have been grafted to the lipid headgroups. Affinity constants derived for the chelator/Fe(3+) complexation as well as for other ions demonstrate very high sensitivity and specificity towards ferric ions with values as high as 5.10(10) M and a detected concentration as low as 50 fM.

Label free femtomolar electrical detection of Fe(iii) ions with a pyridinone modified lipid monolayer as the active sensing layer.

An innovative MOS-type field effect transistor was developed for the electrical detection of ferric ions. The sensing assays clearly show a specific detection with a gate-source voltage shift of up to 200 mV and a wide linear detection range (5 × 10-14 to 5 × 10-5 M) associated with good stability, selectivity and reproducibility.

Supported lipid monolayer with improved nanomechanical stability: effect of polymerization.

We study the effect of polymerization on the nanomechanical stability of supported lipid monolayers consisting of 1,2-di-(10Z,12Z-tricosadiynoyl)-sn-glycero-3-phosphocholine by means of force mapping using an atomic force microscope. For both nonpolymerized and polymerized lipid monolayers, we investigate the break-through forces required to rupture the monolayers for a whole range of loading velocities. We show that the average break-through force exerted by the tip and required to penetrate the monolayer has a logarithmic dependence on the loading rate. Both Young moduli and intrinsic Gibbs energies have been determined for the nonpolymerized and polymerized lipid monolayers, and we show a drastic effect of polymerization on the nanomechanical stability of the monolayer with an increase by a factor of ∼100 for the young modulus and ∼3 for the intrinsic Gibbs activation energy.

Autonomic self-healing lipid monolayer: a new class of ultrathin dielectric.

The electrical performance of stabilized lipid monolayers on H-terminated silicon is reported for the first time. We show that these 2.7 nm thick only ultrathin layers present extremely low current leakage at high electric field and high breakdown voltage that both compare favorably with the best data reported on organic thin film dielectrics. We demonstrate a very unique property of autonomic self-healing of the layer at room temperature with the total recovery of its performance after electrical breakdown. The mechanisms involved in breakdown and self-healing are described.