Linear Electro-Optic Effect in 2D Ferroelectric for Electrically Tunable Metalens.

The advent of 2D ferroelectrics, characterized by their spontaneous polarization states in layer-by-layer domains without the limitation of a finite size effect, brings enormous promise for applications in integrated optoelectronic devices. Comparing with semiconductor/insulator devices, ferroelectric devices show natural advantages such as non-volatility, low energy consumption and high response speed. Several 2D ferroelectric materials have been reported, however, the device implementation particularly for optoelectronic application remains largely hypothetical. Here, the linear electro-optic effect in 2D ferroelectrics is discovered and electrically tunable 2D ferroelectric metalens is demonstrated. The linear electric-field modulation of light is verified in 2D ferroelectric CuInP2S6. The in-plane phase retardation can be continuously tuned by a transverse DC electric field, yielding an effective electro-optic coefficient rc of 20.28 pm V-1. The CuInP2S6 crystal exhibits birefringence with the fast axis oriented along its (010) plane. The 2D ferroelectric Fresnel metalens shows efficacious focusing ability with an electrical modulation efficiency of the focusing exceeding 34%. The theoretical analysis uncovers the origin of the birefringence and unveil its ultralow light absorption across a wide wavelength range in this non-excitonic system. The van der Waals ferroelectrics enable room-temperature electrical modulation of light and offer the freedom of heterogeneous integration with silicon and another material system for highly compact and tunable photonics and metaoptics.

Reprogrammable, Sustainable, and 3D-Printable Cellulose Hydroplastic.

Modern human societies are highly dependent on plastic materials, however, the bulk of them are non-renewable commodity plastics that cause pollution problems and consume large amounts of energy for their thermal processing activities. In this article, a sustainable cellulose hydroplastic material and its composites, that can be shaped repeatedly into various 2D/3D geometries using just water are introduced. In the wet state, their high flexibility and ductility make it conducive for the shaping to take place. In the ambient environment, the wet hydroplastic transits spontaneously into rigid materials with its intended shape in a short time of <30 min despite a thickness of hundreds of microns. They also possess humidity resistance and are structurally stable in highly humid environments. Given their excellent mechanical properties, geometry reprogrammability, bio-based, and biodegradable nature, cellulose hydroplastic poses as a sustainable alternative to traditional plastic materials and even "green" thermoplastics. This article also demonstrates the possibility of 3D-printing these hydroplastics and the potential of employing them in electronics applications. The demonstrated hydroshapable structural electronic components show capability in performing electronic functions, load-bearing ability and geometry versatility, which are attractive features for lightweight, customizable and geometry-unique electronic devices.

Gate-Defined Quantum Confinement in CVD 2D WS2.

Temperature-dependent transport measurements are performed on the same set of chemical vapor deposition (CVD)-grown WS2 single- and bilayer devices before and after atomic layer deposition (ALD) of HfO2 . This isolates the influence of HfO2 deposition on low-temperature carrier transport and shows that carrier mobility is not charge impurity limited as commonly thought, but due to another important but commonly overlooked factor: interface roughness. This finding is corroborated by circular dichroic photoluminescence spectroscopy, X-ray photoemission spectroscopy, cross-sectional scanning transmission electron microscopy, carrier-transport modeling, and density functional modeling. Finally, electrostatic gate-defined quantum confinement is demonstrated using a scalable approach of large-area CVD-grown bilayer WS2 and ALD-grown HfO2 . The high dielectric constant and low leakage current enabled by HfO2 allows an estimated quantum dot size as small as 58 nm. The ability to lithographically define increasingly smaller devices is especially important for transition metal dichalcogenides due to their large effective masses, and should pave the way toward their use in quantum information processing applications.

The Efficacy of Plant-Based Ionizers in Removing Aerosol for COVID-19 Mitigation.

Small-sized droplets/aerosol transmission is one of the factors responsible for the spread of COVID-19, in addition to large droplets and surface contamination (fomites). While large droplets and surface contamination can be relatively easier to deal with (i.e., using mask and proper hygiene measures), aerosol presents a different challenge due to their ability to remain airborne for a long time. This calls for mitigation solutions that can rapidly eliminate the airborne aerosol. Pre-COVID-19, air ionizers have been touted as effective tools to eliminate small particulates. In this work, we sought to evaluate the efficacy of a novel plant-based ionizer in eliminating aerosol. It was found that factors such as the ion concentration, humidity, and ventilation can drastically affect the efficacy of aerosol removal. The aerosol removal rate was quantified in terms of ACH (air changes per hour) and CADR- (clean air delivery rate-) equivalent unit, with ACH as high as 12 and CADR as high as 141 ft3/minute being achieved by a plant-based ionizer in a small isolated room. This work provides an important and timely guidance on the effective deployment of ionizers in minimizing the risk of COVID-19 spread via airborne aerosol, especially in a poorly-ventilated environment.

Quantum Transport in Two-Dimensional WS2 with High-Efficiency Carrier Injection through Indium Alloy Contacts.

Two-dimensional transition metal dichalcogenides (TMDCs) have properties attractive for optoelectronic and quantum applications. A crucial element for devices is the metal-semiconductor interface. However, high contact resistances have hindered progress. Quantum transport studies are scant as low-quality contacts are intractable at cryogenic temperatures. Here, temperature-dependent transfer length measurements are performed on chemical vapor deposition grown single-layer and bilayer WS2 devices with indium alloy contacts. The devices exhibit low contact resistances and Schottky barrier heights (∼10 kΩ µm at 3 K and 1.7 meV). Efficient carrier injection enables high carrier mobilities (∼190 cm2 V-1 s-1) and observation of resonant tunnelling. Density functional theory calculations provide insights into quantum transport and properties of the WS2-indium interface. Our results reveal significant advances toward high-performance WS2 devices using indium alloy contacts.

Carrier control in 2D transition metal dichalcogenides with Al2O3 dielectric.

We report transport measurements of dual gated MoS2 and WSe2 devices using atomic layer deposition grown Al2O3 as gate dielectrics. We are able to achieve current pinch-off using independent split gates and observe current steps suggesting possible carrier confinement. We also investigated the impact of gate geometry and used electrostatic potential simulations to explain the observed device physics.