High Entropy Borides Synthesized by the Thermal Reduction of Metal Oxides in a Microwave Plasma.

Metal oxide thermal reduction, enabled by microwave-induced plasma, was used to synthesize high entropy borides (HEBs). This approach capitalized on the ability of a microwave (MW) plasma source to efficiently transfer thermal energy to drive chemical reactions in an argon-rich plasma. A predominantly single-phase hexagonal AlB2-type structural characteristic of HEBs was obtained by boro/carbothermal reduction as well as by borothermal reduction. We compare the microstructural, mechanical, and oxidation resistance properties using the two different thermal reduction approaches (i.e., with and without carbon as a reducing agent). The plasma-annealed HEB (Hf0.2, Zr0.2, Ti0.2, Ta0.2, Mo0.2)B2 made via boro/carbothermal reduction resulted in a higher measured hardness (38 ± 4 GPa) compared to the same HEB made via borothermal reduction (28 ± 3 GPa). These hardness values were consistent with the theoretical value of ~33 GPa obtained by first-principles simulations using special quasi-random structures. Sample cross-sections were evaluated to examine the effects of the plasma on structural, compositional, and mechanical homogeneity throughout the HEB thickness. MW-plasma-produced HEBs synthesized with carbon exhibit a reduced porosity, higher density, and higher average hardness when compared to HEBs made without carbon.

Discovering Superhard B-N-O Compounds by Iterative Machine Learning and Evolutionary Structure Predictions.

We searched for new superhard B-N-O compounds with an iterative machine learning (ML) procedure, where ML models are trained using sample crystal structures from an evolutionary algorithm. We first used cohesive energy to evaluate the thermodynamic stability of varying B x N y O z compositions and then gradually focused on compositional regions with high cohesive energy and high hardness. The results converged quickly after a few iterations. Our resulting ML models show that B x+2N x O3 compounds with x ≥ 3 (like B5N3O3, B6N4O3, etc.) are potentially superhard and thermodynamically favorable. Our meta-GGA density functional theory calculations indicate that these materials are also wide bandgap (≥4.4 eV) insulators, with the valence band maximum related to the p-orbitals of nitrogen atoms near vacant sites. This study demonstrates that an iterative method combining ML and ab initio simulations provides a powerful tool for discovering novel materials.

High-Entropy Borides under Extreme Environment of Pressures and Temperatures.

The high-entropy transition metal borides containing a random distribution of five or more constituent metallic elements offer novel opportunities in designing materials that show crystalline phase stability, high strength, and thermal oxidation resistance under extreme conditions. We present a comprehensive theoretical and experimental investigation of prototypical high-entropy boride (HEB) materials such as (Hf, Mo, Nb, Ta, Ti)B2 and (Hf, Mo, Nb, Ta, Zr)B2 under extreme environments of pressures and temperatures. The theoretical tools include modeling elastic properties by special quasi-random structures that predict a bulk modulus of 288 GPa and a shear modulus of 215 GPa at ambient conditions. HEB samples were synthesized under high pressures and high temperatures and studied to 9.5 GPa and 2273 K in a large-volume pressure cell. The thermal equation of state measurement yielded a bulk modulus of 276 GPa, in excellent agreement with theory. The measured compressive yield strength by radial X-ray diffraction technique in a diamond anvil cell was 28 GPa at a pressure of 65 GPa, which is a significant fraction of the shear modulus at high pressures. The high compressive strength and phase stability of this material under high pressures and high temperatures make it an ideal candidate for application as a structural material in nuclear and aerospace fields.

Experimental and Computational Studies of Compression and Deformation Behavior of Hafnium Diboride to 208 GPa.

The compression behavior of the hexagonal AlB2 phase of Hafnium Diboride (HfB2) was studied in a diamond anvil cell to a pressure of 208 GPa by axial X-ray diffraction employing platinum as an internal pressure standard. The deformation behavior of HfB2 was studied by radial X-ray diffraction technique to 50 GPa, which allows for measurement of maximum differential stress or compressive yield strength at high pressures. The hydrostatic compression curve deduced from radial X-ray diffraction measurements yielded an ambient-pressure volume V0 = 29.73 Å3/atom and a bulk modulus K0 = 282 GPa. Density functional theory calculations showed ambient-pressure volume V0 = 29.84 Å3/atom and bulk modulus K0 = 262 GPa, which are in good agreement with the hydrostatic experimental values. The measured compressive yield strength approaches 3% of the shear modulus at a pressure of 50 GPa. The theoretical strain-stress calculation shows a maximum shear stress τmax~39 GPa along the (1-10) [110] direction of the hexagonal lattice of HfB2, which thereby can be an incompressible high strength material for extreme-environment applications.

First-principles study of strain effect on the thermoelectric properties of LaP and LaAs.

Rare-earth monopnictides have attracted much attention due to their unusual electronic and topological properties for potential device applications. Here, we study rock-salt structured lanthanum monopnictides LaX (X = P, As) by density functional theory (DFT) simulations. We show systematically that a meta-GGA functional combined with scissor correction can efficiently and accurately compute the electronic structures on a fine DFT k-grid, which is necessary for converging thermoelectric calculations. We also show that strain engineering can effectively improve the thermoelectric performance. Under the optimal conditions of 2% isotropic tensile strain and carrier concentration n = 3 × 1020 cm-3, LaP at a temperature of 1200 K can achieve a figure of merit ZT value >2, which is enhanced by 90% compared to the unstrained value. With carrier doping and strain engineering, lanthanum monopnictides thereby could be promising high-temperature thermoelectric materials.

Superhard Boron-Rich Boron Carbide with Controlled Degree of Crystallinity.

Superhard boron-rich boron carbide coatings were deposited on silicon substrates by microwave plasma chemical vapor deposition (MPCVD) under controlled conditions, which led to either a disordered or crystalline structure, as measured by X-ray diffraction. The control of either disordered or crystalline structures was achieved solely by the choice of the sample being placed either directly on top of the sample holder or within an inset of the sample holder, respectively. The carbon content in the B-C bonded disordered and crystalline coatings was 6.1 at.% and 4.5 at.%, respectively, as measured by X-ray photoelectron spectroscopy. X-ray diffraction analysis of the crystalline coating provided a good match with a B50C2-type structure in which two carbon atoms replaced boron in the α-tetragonal B52 structure, or in which the carbon atoms occupied different interstitial sites. Density functional theory predictions were used to evaluate the dynamical stability of the potential B50C2 structural forms and were consistent with the measurements. The measured nanoindentation hardness of the coatings was as high as 64 GPa, well above the 40 GPa threshold for superhardness.

Electronic structure and anisotropic compression of Os2B3 to 358 GPa.

High pressure study on ultra-hard transition-metal boride Os2B3 was carried out in a diamond anvil cell under isothermal and non-hydrostatic compression with platinum as an x-ray pressure standard. The ambient-pressure hexagonal phase of Os2B3 is found to be stable with a volume compression V/V 0 = 0.670 ± 0.009 at the maximum pressure of 358 ± 7 GPa. Anisotropic compression behavior is observed in Os2B3 to the highest pressure, with the c-axis being the least compressible. The measured equation of state using the 3rd-order Birch-Murnaghan fit reveals a bulk modulus K 0 = 397 GPa and its first pressure derivative [Formula: see text] = 4.0. The experimental lattice parameters and bulk modulus at ambient conditions also agree well with our density-functional-theory (DFT) calculations within an error margin of ∼1%. DFT results indicate that Os2B3 becomes more ductile under compression, with a strong anisotropy in the axial bulk modulus persisting to the highest pressure. DFT further enables the studies of charge distribution and electronic structure at high pressure. The pressure-enhanced electron density and repulsion along the Os and B bonds result in a high incompressibility along the crystal c-axis. Our work helps to elucidate the fundamental properties of Os2B3 under ultrahigh pressure for potential applications in extreme environments.

Experimental and Computational Studies on Superhard Material Rhenium Diboride under Ultrahigh Pressures.

An emerging class of superhard materials for extreme environment applications are compounds formed by heavy transition metals with light elements. In this work, ultrahigh pressure experiments on transition metal rhenium diboride (ReB2) were carried out in a diamond anvil cell under isothermal and non-hydrostatic compression. Two independent high-pressure experiments were carried out on ReB2 for the first time up to a pressure of 241 GPa (volume compression V/V0 = 0.731 ± 0.004), with platinum as an internal pressure standard in X-ray diffraction studies. The hexagonal phase of ReB2 was stable under highest pressure, and the anisotropy between the a-axis and c-axis compression increases with pressure to 241 GPa. The measured equation of state (EOS) above the yield stress of ReB2 is well represented by the bulk modulus K0 = 364 GPa and its first pressure derivative K0´ = 3.53. Corresponding density-functional-theory (DFT) simulations of the EOS and elastic constants agreed well with the experimental data. DFT results indicated that ReB2 becomes more ductile with enhanced tendency towards metallic bonding under compression. The DFT results also showed strong crystal anisotropy up to the maximum pressure under study. The pressure-enhanced electron density distribution along the Re and B bond direction renders the material highly incompressible along the c-axis. Our study helps to establish the fundamental basis for anisotropic compression of ReB2 under ultrahigh pressures.

First-Principles Predictions and Synthesis of B50C2 by Chemical Vapor Deposition.

Density functional theory predictions have been combined with the microwave-plasma chemical vapor deposition technique to explore metastable synthesis of boron-rich boron-carbide materials. A thin film synthesis of high-hardness (up to 37 GPa) B50C2 via chemical vapor deposition was achieved. Characterization of the experimental crystal structure matches well with a new theoretical model structure, with carbon atoms inserted into the boron icosahedra and 2b sites in a α-tetragonal B52 base structure. Previously reported metallic B50C2 structures with carbons inserted only into the 2b or 4c sites are found to be dynamically unstable. The newly predicted structure is insulating and dynamically stable, with a computed hardness value and electrical properties in excellent agreement with the experiment. The present study thus validates the density functional theory calculations of stable crystal structures in boron-rich boron-carbide system and provides a pathway for large-area synthesis of novel materials by the chemical vapor deposition method.

Probing Cerium 4f States across the Volume Collapse Transition by X-ray Raman Scattering.

Understanding the volume collapse phenomena in rare-earth materials remains an important challenge due to a lack of information on 4f electronic structures at different pressures. Here, we report the first high-pressure inelastic X-ray scattering measurement on elemental cerium (Ce) metal. By overcoming the ultralow signal issue in the X-ray measurement at the Ce N4,5-edge, we observe the changes of unoccupied 4f states across the volume collapse transition around 0.8 GPa. To help resolve the longstanding debate on the Anderson-Kondo and Mott-Hubbard models, we further compare the experiments with extended multiplet calculations that treat both screening channels on equal footing. The results indicate that a modest change in the 4f-5d Kondo coupling can well describe the spectral redistribution across the volume collapse, whereas the hybridization between neighboring atoms in the Hubbard model appears to play a minor role. Our study helps to constrain the theoretical models and opens a promising new route for systematic investigation of volume collapse phenomena in rare-earth materials.

Evidence for a strain-tuned topological phase transition in ZrTe5.

A phase transition between topologically distinct insulating phases involves closing and reopening the bandgap. Near the topological phase transition, the bulk energy spectrum is characterized by a massive Dirac dispersion, where the bandgap plays the role of mass. We report measurements of strain dependence of electrical transport properties of ZrTe5, which is known to host massive Dirac fermions in the bulk due to its proximity to a topological phase transition. We observe that the resistivity exhibits a pronounced minimum at a critical strain. We further find that the positive longitudinal magnetoconductance becomes maximal at the critical strain. This nonmonotonic strain dependence is consistent with the switching of sign of the Dirac mass and, hence, a strain-tuned topological phase transition in ZrTe5.

Evolution of a Novel Ribbon Phase in Optimally Doped Bi2Sr2CaCu2O8+δ at High Pressure and Its Implication to High- TC Superconductivity.

One challenge in studying high-temperature superconductivity (HTSC) stems from a lack of direct experimental evidence linking lattice inhomogeneity and superconductivity. Here, we apply synchrotron hard X-ray nanoimaging and small-angle scattering to reveal a novel micron-scaled ribbon phase in optimally doped Bi2Sr2CaCu2O8+δ (Bi-2212, with δ = 0.1). The morphology of the ribbon-like phase evolves simultaneously with the dome-shaped TC behavior under pressure. X-ray absorption studies show that the increasing of TC is associated with oxygen-hole redistribution in the CuO2 plan, while TC starts to decrease with pressure when oxygen holes become immobile. Additional X-ray irradiation experiments reveal that nanoscaled short-range ordering of oxygen vacancies could further lower TC, which indicates that the optimal TC is affected not only by an optimal morphology of the ribbon phase, but also an optimal distribution of oxygen vacancies. Our studies thereby provide for the first time compelling experimental evidence correlating the TC with micron to nanoscale inhomogeneity.

Computational Predictions and Microwave Plasma Synthesis of Superhard Boron-Carbon Materials.

Superhard boron-carbon materials are of prime interest due to their non-oxidizing properties at high temperatures compared to diamond-based materials and their non-reactivity with ferrous metals under extreme conditions. In this work, evolutionary algorithms combined with density functional theory have been utilized to predict stable structures and properties for the boron-carbon system, including the elusive superhard BC5 compound. We report on the microwave plasma chemical vapor deposition on a silicon substrate of a series of composite materials containing amorphous boron-doped graphitic carbon, boron-doped diamond, and a cubic hard-phase with a boron-content as high as 7.7 at%. The nanoindentation hardness of these composite materials can be tailored from 8 GPa to as high as 62 GPa depending on the growth conditions. These materials have been characterized by electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, X-ray diffraction, and nanoindentation hardness, and the experimental results are compared with theoretical predictions. Our studies show that a significant amount of boron up to 7.7 at% can be accommodated in the cubic phase of diamond and its phonon modes and mechanical properties can be accurately modeled by theory. This cubic hard-phase can be incorporated into amorphous boron-carbon matrices to yield superhard materials with tunable hardness values.

Light-Enhanced Spin Fluctuations and d-Wave Superconductivity at a Phase Boundary.

Time-domain techniques have shown the potential of photomanipulating existing orders and inducing new states of matter in strongly correlated materials. Using time-resolved exact diagonalization, we perform numerical studies of pump dynamics in a Mott-Peierls system with competing charge and spin density waves. A light-enhanced d-wave superconductivity is observed when the system resides near a quantum phase boundary. By examining the evolution of spin, charge, and superconducting susceptibilities, we show that a subdominant state in equilibrium can be stabilized by photomanipulating the charge order to allow superconductivity to appear and dominate. This work provides an interpretation of light-induced superconductivity from the perspective of order competition and offers a promising approach for designing novel emergent states out of equilibrium.

Fermionic Symmetry-Protected Topological Phase in a Two-Dimensional Hubbard Model.

We study the two-dimensional (2D) Hubbard model using exact diagonalization for spin-1/2 fermions on the triangular and honeycomb lattices decorated with a single hexagon per site. In certain parameter ranges, the Hubbard model maps to a quantum compass model on those lattices. On the triangular lattice, the compass model exhibits collinear stripe antiferromagnetism, implying d-density wave charge order in the original Hubbard model. On the honeycomb lattice, the compass model has a unique, quantum disordered ground state that transforms nontrivially under lattice reflection. The ground state of the Hubbard model on the decorated honeycomb lattice is thus a 2D fermionic symmetry-protected topological phase. This state-protected by time-reversal and reflection symmetries-cannot be connected adiabatically to a free-fermion topological phase.

Pressure-Induced Confined Metal from the Mott Insulator Sr_{3}Ir_{2}O_{7}.

The spin-orbit Mott insulator Sr_{3}Ir_{2}O_{7} provides a fascinating playground to explore insulator-metal transition driven by intertwined charge, spin, and lattice degrees of freedom. Here, we report high-pressure electric resistance and resonant inelastic x-ray scattering measurements on single-crystal Sr_{3}Ir_{2}O_{7} up to 63-65 GPa at 300 K. The material becomes a confined metal at 59.5 GPa, showing metallicity in the ab plane but an insulating behavior along the c axis. Such an unusual phenomenon resembles the strange metal phase in cuprate superconductors. Since there is no sign of the collapse of spin-orbit or Coulomb interactions in x-ray measurements, this novel insulator-metal transition is potentially driven by a first-order structural change at nearby pressures. Our discovery points to a new approach for synthesizing functional materials.

Loss of signal in recurrent nerve neuromonitoring: causes and management.

During recurrent laryngeal nerve (RLN) neuromonitoring in thyroid surgery, laryngeal electromyography (EMG) amplitude may be correlated with the number of muscle fibers participating in the polarization and these might be correlated with the function of RLN. If RLN is severely injured during the operation, most nerve fibers do not transmit nerve impulse and substantial decrease of EMG amplitude or loss of signal (LOS) will occur. True LOS at the end of an operation often indicates a postoperative fixed vocal cord, and the surgeon should consider the optimal contralateral surgery timing in patients with planned bilateral thyroid operation to avoid the disaster of bilateral vocal cord palsy. However, LOS recovery and false LOS may occur and may lead to an unnecessary 2(nd) operation. Therefore, a reliable modality for intraoperative LOS evaluation and management would afford the surgeon real-time information that could help guide surgical procedure and planning. The updated causes, algorithm, and management of LOS during RLN neuromonitoring are reviewed and summarized.

Novel high-pressure monoclinic metallic phase of V2O3.

Vanadium sesquioxide, V2O3, is a prototypical metal-to-insulator system where, in temperature-dependent studies, the transition always coincides with a corundum-to-monoclinic structural transition. As a function of pressure, V2O3 follows the expected behavior of increased metallicity due to a larger bandwidth for pressures up to 12.5 GPa. Surprisingly, for higher pressures when the structure becomes unstable, the resistance starts to increase. Around 32.5 GPa at 300 K, we observe a novel pressure-induced corundum-to-monoclinic transition between two metallic phases, showing that the structural phase transition can be decoupled from the metal-insulator transition. Using x-ray Raman scattering, we find that screening effects, which are strong in the corundum phase, become weakened at high pressures. Theoretical calculations indicate that this can be related to a decrease in coherent quasiparticle strength, suggesting that the high-pressure phase is likely a critical correlated metal, on the verge of Mott-insulating behavior.

High uniformity in angular correlated-color-temperature distribution of white LEDs from 2800K to 6500K.

In this paper, to our best knowledge, it is the first time to present a precise simulation and detailed design of angular correlated color temperature (CCT) distribution of white LEDs covering a range of CCT from 2800K to 6500K. An optimized design of packaging structure with a silicone lens covering a phosphor dome performed an extreme small angular CCT deviation of 105K in the simulation and 182K in a corresponding real sample for a white LED with the CCT near 6500K.