Sulphate reduction, mixed sulphide- and thiosulphate-driven Autotrophic denitrification, NItrification, and Anammox (SANIA) integrated process for sustainable wastewater treatment.

This study proposes the Sulphate reduction, mixed sulphide- and thiosulphate-driven Autotrophic denitrification, Nitrification, and Anammox integrated (SANIA) process for sustainable treatment of mainstream wastewater after organics capture. Three moving-bed biofilm reactors (MBBRs) were applied for developing sulphate reduction (SR), mixed sulphide- and thiosulphate-driven partial denitrification and Anammox (MSPDA), and NItrification (N), respectively. Typical mainstream wastewater after organics capture (e.g., chemically enhanced primary treatment, CEPT) was synthesized with chemical oxygen demand (COD) of 110 mg/L, sulphate of 50 mg S/L, ammonium of 30 mgN/L. The feasibility of SANIA was investigated with mimic nitrifying effluent supplied in MSPDA-MBBR (Period I), followed by the examination of the applicability of SANIA process with N-MBBR integrated (Period II), under moderate temperatures (25-27 â„ƒ). In Period I, SANIA process was established with both SR- and MSPDA-MBBR continuously operated for over 300 days (no Anammox biomass inoculation). Specifically, in MSPDA-MBBR, high rates of denitratation (2.7 gN/(m2·d)) and Anammox (2.8 gN/(m2·d)) were achieved with Anammox contributing to 81 % of the total inorganic nitrogen removal. In Period II, the integrated SANIA system was continuously operated for over 130 days, achieving up to 90 % of COD, 93 % of ammonium, and 61 % of total inorganic nitrogen (TIN) removal, with effluent concentrations lower than 10 mg COD/L, 3 mg NH4+-N/L, and 13 mg TIN-N/L. The implementation of SANIA can ultimately reduce 75 % and 40 % of organics and aeration energy for biological nitrogen removal. Considering the combination of SANIA with CEPT for carbon capture and sludge digestion/incineration for energy recovery, the new integrated wastewater technology can be a promising strategy for sustainable wastewater treatment.

Physics-informed neural network-based serial hybrid model capturing the hidden kinetics for sulfur-driven autotrophic denitrification process.

Sulfur-driven autotrophic denitrification (SdAD) is a biological process that can remove nitrate from low carbon/nitrogen (C/N) ratio wastewater. Although this process has been intensively researched, the mechanism whereby its intermediates (i.e., elemental sulfur and nitrite ions) are generated and accumulated remains elusive. Existing mathematical models developed for SdAD cannot accurately predict the intermediates in SdAD because of the incomplete knowledge of process kinetic resulting from changes in the environmental conditions and electron competition during SdAD. To address this limitation, we proposed a novel serial hybrid model structure based on a physics-informed neural network (PINN) to capture the dynamics of the process kinetics and predict the substrate concentrations in SdAD. In this study, we evaluated the model through numerical experiments and applied it to real case studies involving batch and continuous-flow reactor scenarios. By leveraging the PINN approach, the hybrid model yielded accurate predictions at both the state (i.e. substrate concentration) and kinetic levels in the numerical experiments and performed better than both mechanistic and purely data-driven models in the case studies. Furthermore, we used the trained hybrid model to design control strategies for SdAD and a novel integrated process involving SdAD and anammox for energy-efficient nitrogen removal. Finally, we discuss the advantages and application scope of the PINN-based hybrid model.

Dosing with pyrite significantly increases anammox performance: Its role in the electron transfer enhancement and the functions of the Fe-N-S cycle.

Anaerobic ammonium oxidation (anammox) represents an energy-efficient process for biological nitrogen removal from ammonium-rich wastewater. However, there are mechanistic issues unsolved regarding the low microbial electron transfer and undesired accumulation of nitrate in treated water, limiting its widespread engineering applications. We found that the addition of pyrite (1 g L-1 reactor), an earth-abundant iron-bearing sulfide mineral, to the anammox system significantly improved the nitrogen removal rate by 52% in long-term operation at a high substrate shock loading (3.86 kg N m-3 d-1). Two lines of evidence were presented to unravel the underlying mechanisms of the pyrite-induced enhancement. Physiochemical evidence indicated that an increase of cytochromes c and Fe-S protein was responsible for the accelerated electron transfer among metabolic enzymes. Multi-omics evidence showed that the depletion of nitrate was attributed to the Fe-N-S cycle driven by nitrate-dependent Fe(II) oxidation and S-based denitrification. This study deepens our understanding of the roles of electron transfer and the Fe-N-S cycle in anammox systems, providing a fundamental basis for the development of mediators in the anammox process for practical implications.

Coupling sulfur-based denitrification with anammox for effective and stable nitrogen removal: A review.

Anoxic ammonium oxidation (anammox) is an energy-efficient nitrogen removal process for wastewater treatment. However, the unstable nitrite supply and residual nitrate in the anammox process have limited its wide application. Recent studies have proven coupling of sulfur-based denitrification with anammox (SDA) can achieve an effective nitrogen removal, owing to stable provision of substrate nitrite from the sulfur-based denitrification, thus making its process control more efficient in comparison with that of partial nitrification and anammox process. Meanwhile, the anammox-produced nitrate can be eliminated through sulfur-based denitrification, thereby enhancing SDA's overall nitrogen removal efficiency. Nonetheless, this process is governed by a complex microbial system that involves both complicated sulfur and nitrogen metabolisms as well as multiple interactions among sulfur-oxidising bacteria and anammox bacteria. A comprehensive understanding of the principles of the SDA process is the key to facilitating the development and application of this novel process. Hence, this review is conducted to systematically summarise various findings on the SDA process, including its associated biochemistry, biokinetic reactions, reactor performance, and application. The dominant functional bacteria and microbial interactions in the SDA process are further discussed. Finally, the advantages, challenges, and future research perspectives of SDA are outlined. Overall, this work gives an in-depth insight into the coupling mechanism of SDA and its potential application in biological nitrogen removal.

Elemental sulfur as electron donor and/or acceptor: Mechanisms, applications and perspectives for biological water and wastewater treatment.

Biochemical oxidation and reduction are the principle of biological water and wastewater treatment, in which electron donor and/or acceptor shall be provided. Elemental sulfur (S0) as a non-toxic and easily available material with low price, possesses both reductive and oxidative characteristics, suggesting that it is a suitable material for water and wastewater treatment. Recent advanced understanding of S0-respiring microorganisms and their metabolism further stimulated the development of S0-based technologies. As such, S0-based biotechnologies have emerged as cost-effective and attractive alternatives to conventional biological methods for water and wastewater treatment. For instance, S0-driven autotrophic denitrification substantially lower the operational cost for nitrogen removal from water and wastewater, compared to the conventional process with exogenous carbon source supplementation. The introduction of S0 can also avoid secondary pollution commonly caused by overdose of organic carbon. S0 reduction processes cost-effectively mineralize organic matter with low sludge production. Biological sulfide production using S0 as electron acceptor is also an attractive technology for metal-laden wastewater treatment, e.g. acid mine drainage. This paper outlines an overview of the fundamentals, characteristics and advances of the S0-based biotechnologies and highlights the functional S0-related microorganisms. In particular, the mechanisms of microorganisms accessing insoluble S0 and feasibility to improve S0 bio-utilization efficiency are critically discussed. Additionally, the research knowledge gaps, current process limitations, and required further developments are identified and discussed.

The effectiveness of divalent cation addition for highly saline activated sludge cultures: Influence of monovalent/divalent ratio and specific cations.

Saline wastewaters are prevalent in various industries and pose challenges to stable biological treatment. Increasing monovalent cation concentrations are commonly reported to deteriorate treatment and settling performance, while divalent cations can enhance flocculation and settling. However, many previous studies were performed at relatively low salinities and reports conflict on whether concentrations of monovalent cations, divalent cations, or their ratio (M/D) are most critical. This study investigates whether addition of divalent cations shows the same benefits at high salinity (∼40 g NaCl.L-1) and whether divalent ion concentration or M/D is a better predictor of enhancement. Nine sequencing batch reactors were operated at 0.8 M NaCl or KCl monovalent salt concentration, and the concentration of divalent cations (Ca2+ and Mg2+) was varied. M/D was found to be the critical factor that consistently influenced sludge characteristics. It was particularly important in describing hydrophobicity, sludge volume index (SVI) and specific oxygen uptake rate (SOUR), with rpartial of -0.879, 0.971 and 0.966 respectively in models that had an r2adj greater than 0.93. Lower M/D also increased biomass concentrations and reduced extracellular polysaccharides, the latter which in turn correlated strongly with many shape and surface charge measures. The specific monovalent salt (Na+ or K+) influenced treatment performance, biomass concentrations, hydrophobicity, SOUR, extracellular protein and SVI. The specific divalent cation was only important in describing SVI, where Mg2+ was beneficial. Overall, this study shows that addition of divalent cations can greatly benefit high salinity activated sludge systems by improving the sludge structure, settling and organic removal.

Development of a kinetic model to evaluate thiosulfate-driven denitrification and anammox (TDDA) process.

Recently, the integration of sulfur-driven denitrification and anammox process has been extensively studied as a promising alternative nitrogen removal technology. Most of these studies investigated the process feasibility and monitored the community dynamics. However, an in-depth understanding of this new sulfur-nitrogen cycle bioprocess based on mathematical modeling and elucidation of complex interactions among different microorganisms has not yet been achieved. To fill this gap, we developed a kinetic model (with 7 bioprocesses, 12 variables, and 19 parameters) to assess the sulfur(thiosulfate)-driven denitrification and anammox (TDDA) process in a single reactor. The parameters used in this process were separately estimated by fitting the data obtained from the experiments. Then, the model was further validated under different conditions, and the results demonstrated that the developed model could describe the dynamic behaviors of nitrogen and sulfur conversions in the TDDA system. The newly developed branched thiosulfate oxidation model was also verified by conducting a metagenomics analysis. Using the developed model, we i) examined the interactions between sulfur-oxidizing bacteria and anammox bacteria at steady-state conditions with varying substrates to demonstrate the reliability of TDDA, and ii) evaluated the feasibility and operation of the TDDA process in terms of practical implementation. Our results will benefit further exploration of the significance of this novel S-N cycle bioprocess and guide its future applications.

Comparative metabolic modeling of multiple sulfate-reducing prokaryotes reveals versatile energy conservation mechanisms.

Sulfate-reducing prokaryotes (SRPs) are crucial participants in the cycling of sulfur, carbon, and various metals in the natural environment and in engineered systems. Despite recent advances in genetics and molecular biology bringing a huge amount of information about the energy metabolism of SRPs, little effort has been made to link this important information with their biotechnological studies. This study aims to construct multiple metabolic models of SRPs that systematically compile genomic, genetic, biochemical, and molecular information about SRPs to study their energy metabolism. Pan-genome analysis was conducted to compare the genomes of SRPs, from which a list of orthologous genes related to central and energy metabolism was obtained. Twenty-four SRP metabolic models via the inference of pan-genome analysis were efficiently constructed. The metabolic model of the well-studied model SRP Desulfovibrio vulgaris Hildenborough (DvH) was validated via flux balance analysis (FBA). The DvH model predictions matched reported experimental growth and energy yields, which demonstrated that the core metabolic model worked successfully. Further, steady-state simulation of SRP metabolic models under different growth conditions showed how the use of different electron transfer pathways leads to energy generation. Three energy conservation mechanisms were identified, including menaquinone-based redox loop, hydrogen cycling, and proton pumping. Flavin-based electron bifurcation (FBEB) was also demonstrated to be an essential mechanism for supporting energy conservation. The developed models can be easily extended to other species of SRPs not examined in this study. More importantly, the present work develops an accurate and efficient approach for constructing metabolic models of multiple organisms, which can be applied to other critical microbes in environmental and industrial systems, thereby enabling the quantitative prediction of their metabolic behaviors to benefit relevant applications.

Electrochemical pretreatment (EPT) of waste activated sludge: Extracellular polymeric substances matrix destruction, sludge solubilisation and overall digestibility.

Anaerobic digestion (AD) of waste activated sludge (WAS) is widely used for stabilisation, mass reduction and resource recovery. However, AD performance is often hampered by the poor digestibility and slow degradation rate for WAS. A series of bench-scale tests was conducted using innovative electrochemical pretreatment (EPT) method to enhance the destruction of the extracellular polymeric substances (EPS) matrix and anaerobic digestibility. The results showed that the EPS matrix destruction was enhanced by 15-30% after EPT for 0.5 h at voltages of 8-15 V. The highest improvement in hydrolysis rate and overall digestibility was achieved at EPT of 15 V for 1.5 h, which was determined as 59% (from 0.27 to 0.43 d-1) and 28% (from 105 to 134 mL CH4/g VSSadded) respectively, compared with the WAS treatment without EPT. The economic analysis showed 1 h, 12 V EPT was more economically feasible.

Microbial sulfur metabolism and environmental implications.

Sulfur as a macroelement plays an important role in biochemistry in both natural environments and engineering biosystems, which can be further linked to other important element cycles, e.g. carbon, nitrogen and iron. Consequently, the sulfur cycling primarily mediated by sulfur compounds oxidizing microorganisms and sulfur compounds reducing microorganisms has enormous environmental implications, particularly in wastewater treatment and pollution bioremediation. In this review, to connect the knowledge in microbial sulfur metabolism to environmental applications, we first comprehensively review recent advances in understanding microbial sulfur metabolisms at molecular-, cellular- and ecosystem-levels, together with their energetics. We then discuss the environmental implications to fight against soil and water pollution, with four foci: (1) acid mine drainage, (2) water blackening and odorization in urban rivers, (3) SANI® and DS-EBPR processes for sewage treatment, and (4) bioremediation of persistent organic pollutants. In addition, major challenges and further developments toward elucidation of microbial sulfur metabolisms and their environmental applications are identified and discussed.

Exploration and verification of the feasibility of sulfide-driven partial denitrification coupled with anammox for wastewater treatment.

Anaerobic ammonia oxidation (anammox) is a well-developed biotechnology for treating high-strength ammonium wastewaters. Recently, partial denitrification has been considered as an alternative to supply anammox with the required nitrite. In this study, a process of sulfide-driven partial denitrification and anammox (SPDA) was developed and operated continuously in an upflow anaerobic sludge blanket (UASB) reactor for 392 days. This reactor was fed with synthetic wastewater containing 100 mgN/L nitrate, 80 mgN/L ammonium and 20-80 mgS/L sulfide. After 160 days of operation, the reactor reached stable performance, and the nitrogen removal efficiency and rate were maintained at 80% and 0.29 kgN/(m³â€¢d), respectively. The estimated nitrogen removal via anammox and sulfide-driven denitrification were 87.2% and 12.8%. Additional batch experiments were conducted to investigate the effects of sulfide on anammox and the mechanisms of nitrogen removal in the SPDA system. The following results were obtained: (1) sulfide had an inhibitory effect on the specific anammox activity with IC50 of 9.7 mgS-H2S/L. (2) The rapid oxidation of sulfide by sulfur-oxidizing bacteria (SOB) could relieve the toxic effects of sulfide on the anammox in the SPDA system. (3) Sulfide bio-oxidation was a two-step reaction with biologically produced elemental sulfur (BPS0) as the intermediate, and the second step using BPS0 as the electron donor, can efficiently produce nitrite via partial denitrification (NO3- → NO2-) as a supply for anammox. Finally, a high-throughput sequencing analysis identified Thiobacillus and Sulfurimonas as the dominant genera of SOB in the SPDA system, and Candidatus Kuenenia as the dominant anammox bacteria. Overall, this research gives the foundation for the practical application of sulfide-driven partial denitrification and anammox process in the future.

Identifying the mechanisms of sludge reduction in the sulfidogenic oxic-settling anaerobic (SOSA) process: Side-stream sulfidogenesis-intensified sludge decay and mainstream extended aeration.

An energy-/cost-efficient and environment-friendly in-situ sludge reduction process, called the sulfidogenic oxic-settling anaerobic (SOSA) was developed recently. However, the underpinning mechanism of sludge reduction by the SOSA process remains elusive. This paper investigated the possible mechanisms of sludge reduction through biomass cultivation in three lab-scale experimental systems: one anoxic-oxic CAS process with a long sludge retention time (SRT) and extended aeration (EAO) process, and two EAO-based in-situ sludge reduction processes, i.e., the conventional oxic-settling anaerobic (COSA) process and the new SOSA process. These three comparative biosystems were operated with identical influent and reactor configurations as well as the same biomass concentrations and SRTs (approximately 5 g/L and 46 days, respectively), and the sludge interchange ratios (between the CAS and side-stream reactors) in COSA and SOSA were both 10% per day. Three systems all achieved high organic (>93%) and total nitrogen (TN) (>74%) removal efficiencies. SOSA produced 29% and 20% less sludge than EAO and COSA, respectively, simultaneously consumed 14% and 8% more oxygen than EAO and COSA, indicating that the sludge reduction in SOSA was not only caused by EAO-based aerobic digestion in the mainstream and conventional anaerobic reactions in the side-stream, but more importantly due to the bioaugmentation of sulfidogenesis. The roles of sulfidogenesis were further studied in batch tests, and the key findings were as follows: i) the SOSA biomass had a faster endogenous decay rate (0.097 d-1) than that of the COSA biomass (0.045 d-1), and ii) sulfidogenesis accelerated anaerobic solubilization, hydrolysis, acidogenesis and acetogenesis by 2.3 - 3.1 times, 6 - 22 %, 22 - 60% and 6 - 22%, respectively. Overall, the mechanisms of sludge reduction in SOSA were unraveled in this study which will help promote its full-scale application in future.

Shock effects of monovalent cationic salts on seawater cultivated granular sludge.

Saline wastewater is commonly encountered in various industries, posing challenges to biological treatments. The application of seawater as a seed source provides a media of diverse halophilic organisms for rapid startup. However, effects of transitioning from a mixed salt source to monovalent salt solutions prevalent in industry remains unexplored. Hence, seed sludge was cultivated using seawater and later granulated under a mixed-salt synthetic medium comprising a mixture of NaCl, KCl and Na2SO4 at a combined concentration of 0.8 M (0.27 M each). The stable, acclimated granules were then tested against single salt media of 0.8 M NaCl, KCl, or Na2SO4. Shift to single salt media resulted in granule disaggregation, poor settling, sludge washout and development of fluffy or slimy flocs. Changes in exopolysaccharides composition after the single salt shift was the predominant reason for the large changes in sludge morphology. The impacts of KCl and Na2SO4 were more significant than the shift to NaCl. The resulting impacts also had a major influence on the treatment performance. A complex mechanism involving monovalent cation stimulation of proteins; ionic strength impacts on exopolysaccharides and morphology; solution density influence on sludge density and settling; and tonicity impacts on cell viability and treatment is described.

Achieving rapid thiosulfate-driven denitrification (TDD) in a granular sludge system.

Sulfur-oxidizing bacteria (SOB) can drive a high level of autotrophic denitrification (AD) activity with thiosulfate (S2O32-) as the electron donor. However, the slow growth of SOB results in a low biomass concentration in the AD reactor and unsatisfactory biological nitrogen removal (BNR). In this study, our goal was to establish a high-rate thiosulfate-driven denitrification (TDD) system via sludge granulation. Granular sludge was successfully cultivated by increasing the nitrogen loading rate stepwise in thiosulfate-oxidizing/nitrate-reducing conditions in an upflow anaerobic blanket reactor. In the mature-granular-sludge reactor, a nitrate removal rate of 280 mg N/L/h was achieved with a nitrate removal efficiency of 97.7%±1.0% at a hydraulic retention time of only 15 minutes, with no nitrite detected in the effluent. Extracellular polymeric substance (EPS) analysis indicated that the proteins in loosely bound and tightly bound EPS were responsible for maintaining the compact structure of the TDD granular sludge. The dynamics of the microbial-community shift were identified by 16S rRNA high-throughput pyrosequencing analysis. The Sulfurimonas genus was found to be enriched at 74.1% of total community and may play the most critical role in the high-rate BNR. The batch assay results reveal that no nitrite accumulation occurred during nitrate reduction because the nitrate reduction rate (75.90±0.67 mg N/g MLVSS/h) was almost equal to the nitrite reduction rate (66.06±1.28 mg N/g MLVSS/h) in the thiosulfate-driven granular sludge reactor. The results of this study provide support for the establishment of a high-rate BNR system that maintains its stability with a low sludge yield.

Rational design of sulfidogenic granular sludge reactor with clostridia as dominant bacteria for energy-efficient sulfate-laden wastewater treatment.

The sludge flotation and washout are frequently observed in anaerobic sulfidogenic reactor. This challenge raised the interests of re-thinking/re-designing of a compact and low-flotation bioreactor. The present study investigated to understand the temporal dynamics of microbial community and granular sludge properties in a pneumatic-mixing reactor treating sulfate-laden wastewater. The findings revealed that the reactor performance and sludge properties were dynamically changed and correlated over long-term run. In the bioreactor, a rarer type of sulfate reducing bacteria (genus Clostridium XVIII) was remarkably enriched (~30% abundance). The Clostridium XVIII-mediated COD removal (92.7 ± 3.9%) was further confirmed via mass balance which demonstrated the growth rate of total active biomass and sulfate-reducing active biomass were 19.95 and 6.0 mg-COD/Linfluent respectively. The PICRUSt data suggested that i) high abundance of carbohydrate metabolism and S-reductase enzymes enriched, and ii) energy metabolism enzymes decreased which implies that the new SRB communities are more energy-efficient than conventional ones.

Potential for co-disposal and treatment of food waste with sewage: A plant-wide steady-state model evaluation.

The water, food and energy nexus is a vital subject to achieve sustainable development goals worldwide. Wastewater (WW) and food waste (FW) from municipal sources are the primary contributors of organic waste from cities. Along with the loss of these valuable natural resources, their treatment systems also consume a considerable amount of abiotic energy and resource input and make a perceptible contribution to global warming. Hence, the global paradigm has evolved from simple pollution mitigation to resource recovery systems. In this study, the prospects of FW co-disposal into the sewer system and treatment with municipal sewage were quantitatively investigated for Hong Kong's largest biological WW treatment plant (WWTP) by integrated plant-wide steady-state modelling (PWSSM) and lifecycle assessment (LCA) approaches. The investigation assessed the impacts on the design and operational capacity of the WWTP, effluent quality, sludge output, and its net energy and carbon footprint. The results revealed that even at a higher than normal FW to sewage ratio, the WWTP's organic load capacity and performance in terms of organics and nitrogen removal was not significantly degraded, in fact the denitrification efficiency was improved by the FW organics with low N/C ratio. The net energy balance was improved by 80-400%, the net carbon footprint was lowered by 37-63% (without biogenic emissions), while the sludge production was increased by ∼33%. The results are very sensitive and improved with greater influent FW concentration and solids capture in the primary settling unit of the WWTP. The differences in the results have to be seen in relation to uncontrolled methane emission and a faster filling rate if the FW were disposed to landfill. The study provides valuable insights and policy guidelines for the decision makers locally and a generic methodological template.

Municipal solid waste: Review of best practices in application of life cycle assessment and sustainable management techniques.

Municipal solid waste (MSW) management is a globally recognized environmental issue. The concepts of sustainability and the circular economy have progressed MSW management system from basic disposal to recycling and resource recovery. Life cycle assessment (LCA) is the technique that has been widely used to analyse MSW management system. However, the reliability of results is deeply influenced by the methodology, quality of data, and robustness of the analyses. This raises two questions: how to improve the quality of LCA work, and how to select the appropriate MSW management strategy for practice? To answer these questions, we have conducted a critical review of 79 scientific studies from 36 low-to-high income countries. The review examines the scientific community's application of LCA to MSW management and identifies the best practices to follow for a good-quality study. Then after categorically assessing the results of the studies, a ranking of appropriate MSW management scenarios is made. Results reveal that the objective of an LCA study is subjective but a decisive factor that defines the procedure of subsequent steps. Differences are found among the practitioners, especially in study boundaries, selection of impact categories, choice of input data and analysis methods. Sensitivity analysis is critical for producing reliable results but was not performed in around 38% of the studies. Our analysis also reveals that the integration of recycling, treatment and disposal technologies is the most appropriate strategy. The choice of technologies and their performance, however, depends on the technological and socio-economic background of the studied region.

Bioaugmentation of marine anammox bacteria (MAB)-based anaerobic ammonia oxidation by adding Fe(III) in saline wastewater treatment under low temperature.

This work investigated a new method of using Fe(III) to enhance the reactor performance enriched with marine anammox bacteria (MAB). The experiments were conducted in a sequencing batch reactor at low temperature (15 °C), high salinity (35 g/L) and varying Fe(III) concentrations (0-250 mg/l). The results of this study showed that at low Fe(III) (6 mg Fe/L), the rate of ammonium removal, nitrite removal and specific anammox activity remarkably increased to 0.42 kg/(m3·d), 0.53 kg/(m3·d), 0.56 kg/(kg·d), respectively. However, Fe(III) at above 120 mg Fe/L, the reaction time was significantly shortened from 5 to 2 h. MAB-based nitrite removal could be predicated based on the change of pH (ΔpH) and oxidation-reduction potential (ΔORP). Kinetics analysis demonstrated, the "Remodified Logistic Model" could simulate the Fe(III) enhanced anammox process. Overall, this research shed the light of designing a new high-rate anaerobic nitrogen removal technology for carbon insufficient, nitrogen-laden saline wastewater.

Generation of zero valent sulfur from dissimilatory sulfate reduction under methanogenic conditions.

Dissimilatory sulfate reduction mediated by sulfate-reducing microorganisms (SRMs) has a pivotal role in the sulfur cycle, from which the generation of zero valent sulfur (ZVS) represents a novel pathway. Nonetheless, information on ZVS production from the dissimilatory sulfate reduction remains scarce. This study successfully showed the ZVS production from the dissimilatory sulfate reduction both in a bioreactor and batch experiments under the methanogenic condition. The ZVS was produced in the form of polysulfide and largely located at extracellular sites. In the bioreactor, interestingly, ZVS could be generated first from partial sulfide oxidation mediated by sulfide-oxidizing bacteria (e.g., Thiobacillus) and later from the dissimilatory sulfate reduction in SRMs when changing the reactor operation from anoxic to obligate anaerobic and black condition. In batch experiments, increasing sulfate concentration was shown to enhance ZVS production. Based on these results, together with thermodynamic calculations, a scenario was proposed for the ZVS production from dissimilatory sulfate reduction, in which SRMs might utilize sulfate-to-ZVS as an alternative pathway to sulfate-to-sulfide to increase the thermodynamic favorability and alleviate the inhibitive effects of sulfide. This study expands our understanding of the SRMs-mediated dissimilatory sulfate reduction and may have important implications in environmental bioremediation.

Elucidating the effect of mixing technologies on dynamics of microbial communities and their correlations with granular sludge properties in a high-rate sulfidogenic anaerobic bioreactor for saline wastewater treatment.

In this study, three lab-scale anaerobic sulfidogenic bioreactors were operated independently using three different mixing modes (hydraulic, mechanical and pneumatic). One-way ANOVA test indicated various performance parameters (e.g. sulfate reduction and sulfide production) and granular sludge properties (e.g. EPS and particle size) statistically different in three mixing modes. Principal component analysis (PCA) and OTUs-based network demonstrated bacterial composition greatly varied among the three mixing modes. The phylum Proteobacteria was predominant among the bacterial communities, and the genus Desulfobacter (35.1% in hydraulic, 31.1% in mechanical and 27.4% in pneumatic sample) was the most dominant SRB. The PCA/Pearson's correlation analysis confirmed SRB had significant positive relationship with sludge properties (e.g. particle size). PICRUSt data highlighted that bacterial communities contained diverse predicted functions including sulfur metabolism enzymes (sulfite reductase and adenylylsulfate reductase). The findings of this research could be helpful for selection of an appropriate mixing technology for anaerobic sulfidogenic or similar bioprocess.