Simultaneous detection of SARS-CoV-2 S1 protein by using flexible electrochemical and Raman enhancing biochip.

Flexible laser-scribed graphene (LSG) substrates with gold nanoislands have been developed as biochips for in situ electrochemical (EC) and surface-enhanced Raman scattering (SERS) biodetection (biomolecules and viral proteins). A flexible biochip was fabricated using CO2 laser engraving polyimide (PI) films to form a 3D porous graphene-like nanostructure. Gold nanoislands were deposited on the LSG substrates to enhance the intensity of the Raman signals. Moreover, the addition of auxiliary and reference electrodes induced a dual-function EC-SERS biochip with significantly enhanced detection sensitivity. The biochip could selectively and easily capture SARS-CoV-2 S1 protein through the SARS-CoV-2 S1 antibody immobilized on EC-SERS substrates using 1-ethyl-(3-dimethylaminopropyl)carbodiimide (EDC) and N-hydroxysuccinimide (NHS). The grafted antibody specifically bound to SARS-CoV-2, resulting in a significant increase in the SERS signal of the target analyte. The limit of detection (LOD) of the SARS-CoV-2 S1 protein was 5 and 100 ng/mL by using EC and SERS detection, respectively. Although the LOD of the SARS-CoV-2 S1 protein detected using SERS is only 100 ng/mL, it can provide fingerprint information for identification. To improve the LOD, EC detection was integrated with SERS detection. The three-electrode detection chip enables the simultaneous detection of SERS and EC signals, which provides complementary information for target identification. The dual-functional detection technology demonstrated in this study has great potential for biomedical applications, such as the rapid and sensitive detection of SARS-CoV-2.

Reproducible SERS substrates manipulated by interparticle spacing and particle diameter of gold nano-island array using in-situ thermal evaporation.

Gold (Au) nano-island arrays were deposited on the glass substrate to fabricate surface-enhanced Raman scattering (SERS) substrates by in-situ thermal evaporation (deposited and annealed samples at the same time). The optimal SERS intensity deposited by various thicknesses and in-situ annealing temperatures of Au nano-island arrays would be investigated. The biomolecules (adenine) were dropped on the well-designed SERS substrate for precise and quantitative SERS detection. The characterization of Au nano-island arrays SERS substrate would be evaluated by scanning electron microscope (SEM) and Raman spectroscopy. The results showed that the optimal deposition thickness and annealing temperature of Au nano-island arrays SERS substrate is about 14 nm and 200 °C respectively, which can construct the smallest interparticle spacing (W)/ particle diameter (D) ratio and the lowest reflection (%) and transmittance (%) to form the strongest SERS intensity. Moreover, finite-difference time-domain (FDTD) simulation of the electromagnetic field distributions on Au nano-island arrays displays the similar trend with the experimental results. The 14 nm deposition with 200 °C in-situ annealing temperature would display the highest density of hot-spots by FDTD simulation. The reproducible Au nano-island arrays SERS substrates with tunable surface roughness, W/D ratio, and lower reflection and transmittance show promising potential for SERS detection of biomolecules, bacteria, and viruses.

Corrosion Resistance and Thermal Conductivity Enhancement of Reduced Graphene Oxide-BaSO4-Epoxy Composites.

The results of studies on the corrosion protectiveness and thermal conductivity of reduced graphene oxide-BaSO4 epoxy composites are reported here. A commercial epoxy resin and reduced graphene oxide (rGO) were blended with a hardening reagent and then mixed with prepared BaSO4-epoxy resin (B-epoxy). The reduced graphene oxide-BaSO4-epoxy composite (rGO-B-epoxy) paste was used to coat the surfaces of Al 7205 alloy and the corrosion and thermal properties were investigated. A corrosion test in a 3.5 wt% synthetic sea water solution showed that the composite coating containing BaSO4 had the best corrosion resistance. Moreover, the rGO-B-epoxy composite showed better protection against corrosion than the epoxy alone. The rGO-B-epoxy composite with 5 wt% BaSO4 had an in-plane coefficient of thermal conductivity of approximately 165.0 W/m K, and the in-plane thermal diffusivity was 71.38 mm2/s. In standard thermal conductivity tests, all three samples had values below 40 W/m K. The rGO-B-epoxy composites showed good surface corrosion protection and in-plane thermal conductivity.

Reduced graphene oxide nanosheets decorated with core-shell of Fe3O4-Au nanoparticles for rapid SERS detection and hyperthermia treatment of bacteria.

In this study, the core-shell of Fe3O4-Au nanoparticles (NPs) were prepared by seeding AuNPs onto Fe3O4 NPs modified with poly-ethylenimine (PEI). Later, Fe3O4-Au NPs were attached to cationic poly(dimethyldiallylammonium chloride) (PDDA)-modified graphene oxide (GO) nanosheets through in situ self-assembly behaviors, termed as Fe3O4-Au@RGO nanocomposites, for surface-enhanced Raman scattering (SERS) detection and hyperthermia treatment of bacteria. The resulting Fe3O4-Au@RGO nanocomposites were evaluated systematically by transmission electron microscope, zeta potential, X-ray diffraction, X-ray photoelectron spectroscopy, and vibrating sample magnetometer. It revealed that the core-shell structured Fe3O4-Au NPs were dispersed homogeneously on the surface of the GO nanosheets. Furthermore, the rapid SERS detection for small biomolecules and bacteria was conducted by Raman spectroscopy. The results showed that the greatest SERS intensity was fne tuned at the weight ratio of Fe3O4-Au/RGO nanosheets was 20/1, displaying the optimal interparticle gap of AuNPs to induce the huge hot-spots effect. The magnetic inductive heating capability of Fe3O4-Au@RGO nanocomposites was produced under high frequency magnetic field exposure and can kill high than 90% of the bacteria at 10 min. Hence, the newly developed Fe3O4-Au@RGO nanocomposites were demonstrated to be viable for SERS detection of biomolecules and microbes and potential applications for magnetically capturing and hyperthermia treatment of bacteria.

Flexible PDMS-Based SERS Substrates Replicated from Beetle Wings for Water Pollutant Detection.

The flexible surface-enhanced Raman scattering (SERS) sensor, which has the bionic 3D nanoarray structure of a beetle-wing substrate (BWS), was successfully prepared by replicated technology and thermal evaporation. The bionic structure was replicated with polydimethylsiloxane (PDMS) and then silver (Ag) nanoisland thin films were deposited by thermal evaporation. The deposition times and thicknesses (25-40 nm) of the Ag thin films were manipulated to find the optimal SERS detection capability. The Ag nanoisland arrays on the surface of the bionic replicated PDMS were observed by scanning electron microscope (SEM), X-ray diffraction (XRD), and contact angle, which can generate strong and reproducible three-dimensional hotspots (3D hotspots) to enhance Raman signals. The water pollutant, rhodamine 6G (R6G), was used as a model molecule for SERS detection. The results show that 35 nm Ag deposited on a PDMS-BWS SERS substrate displays the strongest SERS intensity, which is 10 times higher than that of the pristine BWS with 35 nm Ag coating, due to the excellent 3D bionic structure. Our results demonstrate that bionic 3D SERS sensors have the potential to be applied in wearable devices and sensors to detect biomolecules and environmental pollutants, such as industrial wastewater, in the future.

Surface Structure Analysis of Initial High-Temperature Oxidation of SS441 Stainless Steel.

Chromia-forming ferritic stainless steel (FSS) is a highly promising interconnect material for application in solid oxide fuel cells. In this study, initial oxidation of chromium oxides was performed at 500-800 °C to understand the evolution of materials at an early stage. The structural variations in oxide scales were analyzed through scanning electron microscopy, energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), X-ray diffractometry (XRD), laser confocal microscopy (LSCM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. Surface electrochemical properties were investigated through electrochemical impedance spectroscopy to understand how the heat treatment temperature affected surface impedance. Treatment temperatures higher than 700 °C facilitate the diffusion of Cr and Mn, thus allowing ferritic spinels to form on the surface and leading to high electrical conductivity.

Low-Cost Catalyst Ink for Simple Patterning and Growth of High-Quality Single- and Double-Walled Carbon Nanotubes.

Research into carbon nanotubes (CNTs) has been a hot topic for almost 3 decades, and it is now that we are beginning to observe the impact of advanced applictions of this nanomaterial in areas such as electronics. Currently, in order to mass produce CNT devices, either large-scale synthesis, followed by numerous energy-intensive processing steps or photolithography processes, including several sputter-deposition steps, are required to pattern this material to fabricate functional devices. In the work reported here, through the utilization of a universal catalyst precursor (cyclopentadienyl iron dicarbonyl dimer) and the optimization of solution parameters, patterned high-quality vertically aligned arrays of single- and few-walled CNTs have been synthesized via various inexpensive, commercially scalable methods such as inkjet printing, stamp printing, spray painting, and even handwriting. The two-step process of precursor printing, followed immediately by CNT growth, results in CNTs with a Raman ID/IG ratio of 0.073, demonstrating very high-quality nanotubes. This process eliminates time-consuming and costly CNT post processing techniques or the deposition of numerous substrate barrier and catalyst layers to achieve device manufacturing. As a result, this method has the potential to provide a route for the large-scale synthesis of high-quality single- and few-walled CNTs that can be applied in industrial settings.