Room Temperature Spin-to-Charge Conversion in Amorphous Topological Insulating Gd-Alloyed BixSe1-x/CoFeB Bilayers.

Disordered topological insulator (TI) films have gained intense interest by benefiting from both the TI's exotic transport properties and the advantage of mass production by sputtering. Here, we report on the clear evidence of spin-charge conversion (SCC) in amorphous Gd-alloyed BixSe1-x (BSG)/CoFeB bilayers fabricated by sputtering, which could be related to the amorphous TI surface states. Two methods have been employed to study SCC in BSG (tBSG = 6-16 nm)/CoFeB(5 nm) bilayers with different BSG thicknesses. First, spin pumping is used to generate a spin current in CoFeB and detect SCC by the inverse Edelstein effect (IEE). The maximum SCC efficiency (SCE) is measured to be as large as 0.035 nm (IEE length λIEE) in a 6 nm thick BSG sample, which shows a strong decay when tBSG increases due to the increase of BSG surface roughness. The second method is THz time-domain spectroscopy, which reveals a small tBSG dependence of SCE, validating the occurrence of a pure interface state-related SCC. Furthermore, our angle-resolved photoemission spectroscopy data show dispersive two-dimensional surface states that cross the bulk gap until the Fermi level, strengthening the possibility of SCC due to the amorphous TI states. Our studies provide a new experimental direction toward the search for topological systems in amorphous solids.

Observation of High Spin-to-Charge Conversion by Sputtered Bismuth Selenide Thin Films at Room Temperature.

We investigated spin-to-charge conversion in sputtered Bi43Se57/Co20Fe60B20 heterostructures with in-plane magnetization at room temperature. High spin-to-charge conversion voltage signals have been observed at room temperature. The transmission electron microscope images show that the sputtered bismuth selenide thin films are nanogranular in structure. The spin-pumping voltage decreases with an increase in the size of the grains. The inverse Edelstein effect length (λIEE) is estimated to be as large as 0.32 nm. The large λIEE is due to the spin-momentum locking and is further enhanced by quantum confinement in the nanosized grains of the sputtered bismuth selenide films. We also investigated the effect on spin-pumping voltage due to the insertion of layers of MgO and Ag. The MgO insertion layer has almost completely suppressed the spin-pumping voltage, whereas the Ag insertion layer has enhanced the λIEE by 43%.

Room-temperature high spin-orbit torque due to quantum confinement in sputtered BixSe(1-x) films.

The spin-orbit torque (SOT) that arises from materials with large spin-orbit coupling promises a path for ultralow power and fast magnetic-based storage and computational devices. We investigated the SOT from magnetron-sputtered BixSe(1-x) thin films in BixSe(1-x)/Co20Fe60B20 heterostructures by using d.c. planar Hall and spin-torque ferromagnetic resonance (ST-FMR) methods. Remarkably, the spin torque efficiency (θS) was determined to be as large as 18.62 ± 0.13 and 8.67 ± 1.08 using the d.c. planar Hall and ST-FMR methods, respectively. Moreover, switching of the perpendicular CoFeB multilayers using the SOT from the BixSe(1-x) was observed at room temperature with a low critical magnetization switching current density of 4.3 × 105 A cm-2. Quantum transport simulations using a realistic sp3 tight-binding model suggests that the high SOT in sputtered BixSe(1-x) is due to the quantum confinement effect with a charge-to-spin conversion efficiency that enhances with reduced size and dimensionality. The demonstrated θS, ease of growth of the films on a silicon substrate and successful growth and switching of perpendicular CoFeB multilayers on BixSe(1-x) films provide an avenue for the use of BixSe(1-x) as a spin density generator in SOT-based memory and logic devices.

High Performance MgO-barrier Magnetic Tunnel Junctions for Flexible and Wearable Spintronic Applications.

The magnetic tunnel junction (MTJ) using MgO barrier is one of most important building blocks for spintronic devices and has been widely utilized as miniaturized magentic sensors. It could play an important role in wearable medical devices if they can be fabricated on flexible substrates. The required stringent fabrication processes to obtain high quality MgO-barrier MTJs, however, limit its integration with flexible electronics devices. In this work, we have developed a method to fabricate high-performance MgO-barrier MTJs directly onto ultrathin flexible silicon membrane with a thickness of 14 µm and then transfer-and-bond to plastic substrates. Remarkably, such flexible MTJs are fully functional, exhibiting a TMR ratio as high as 190% under bending radii as small as 5 mm. The devices' robustness is manifested by its retained excellent performance and unaltered TMR ratio after over 1000 bending cycles. The demonstrated flexible MgO-barrier MTJs opens the door to integrating high-performance spintronic devices in flexible and wearable electronics devices for a plethora of biomedical sensing applications.

Time-Resolved Magneto-Optical Kerr Effect of Magnetic Thin Films for Ultrafast Thermal Characterization.

Thermomagnetic and magneto-optical effects are two fundamental but unique phenomena existing in magnetic materials. In this work, we demonstrate ultrafast time-resolved magneto-optical Kerr effect (TR-MOKE) as an advanced thermal characterization technique by studying the original factors of the MOKE signal from four magnetic transducers, including TbFe, GdFeCo, Co/Pd, and CoFe/Pt. A figure of merit is proposed to evaluate the performance of the transducer layers, corresponding to the degree of the signal-to-noise ratio in TR-MOKE measurements. We observe improved figure of merit for rare-earth transition-metal-based TbFe and GdFeCo transducers and attribute this improvement to their relatively larger temperature-dependent magnetization and the Kerr rotation angle at the saturated magnetization state. Furthermore, an optimal thickness of TbFe is found to be ∼18.5 nm to give the best performance. Our findings will facilitate the nanoscale thermal characterization and the device design where the thermo-magneto-optical coupling plays an important role.

Clinical Efficacy of a Modified Nagata Method That Retains the Fascia Pedicle of the Mastoid Skin Flap in Auricular Reconstruction of Chinese Microtia Patients.

The purpose of this study was to search for an enhanced blood supply in the distal edge of the skin at the mastoid area in total auricular reconstruction. The authors modified the Nagata method by reserving a subcutaneous fascia pedicle (diameter, 3 to 5 mm) at the intersection of the point 11 to 13 mm from the residual ear tragus (or tragus projection) and 8 to 10 mm from the lowest point of the residual ear lobe. Compared with the traditional Nagata method group, the modified Nagata method group that retained the fascia pedicle of the mastoid skin flap had higher rates of excellent and good flaps (p < 0.05). Auricular reconstruction with the modified Nagata method, retaining the fascia pedicle of the mastoid skin flap, had a reduced incidence of skin flap necrosis.

Changes in the Prevalence of Rheumatic Diseases in Shantou, China, in the Past Three Decades: A COPCORD Study.

This study aimed to clarify changes in the prevalence of rheumatic diseases in Shantou, China, in the past 3 decades and validate whether stair-climbing is a risk factor for knee pain and knee osteoarthritis (KOA). The World Health Organization-International League Against Rheumatism Community Oriented Program for Control of Rheumatic Diseases (COPCORD) protocol was implemented. In all, 2337 adults living in buildings without elevators and 1719 adults living in buildings with elevators were surveyed. The prevalence of rheumatic pain at any site and in the knee was 15.7% and 10.2%, respectively; both types of pain had a significantly higher incidence in residents of buildings without elevators than was reported by people who lived in buildings with elevators (14.9% vs. 10.6% and 11.32% vs. 8.82%, respectively) (both P < 0.0001). The prevalence of rheumatic pain in the neck, lumbar spine, shoulder, elbow, and foot was 5.6%, 4.5%, 3.1%, 1.4%, and 1.8%, respectively; these findings were similar to the data from the 1987 rural survey, but were somewhat lower than data reported in the urban and suburban surveys of the 1990s, with the exception of neck and lumbar pain. The prevalence of KOA, gout, and fibromyalgia was 7.10%, 1.08%, and 0.07%, respectively, and their prevalence increased significantly compared with those in previous studies from the 20th century. There were no significant differences in the prevalence of rheumatoid arthritis (RA) (0.35%) or ankylosing spondylitis (AS) (0.31%) compared to that reported in prior surveys. The prevalence of KOA was higher in for residents of buildings without elevators than that in those who had access to elevators (16-64 years, 5.89% vs. 3.95%, P = 0.004; 16->85 years, 7.64% vs. 6.26%, P = 0.162). The prevalence of RA and AS remained stable, whereas that of KOA, gout, and fibromyalgia has increased significantly in Shantou, China, during the past 3 decades. Stair-climbing might be an important risk factor for knee pain and KOA.

Exchange-biased hybrid ferromagnetic-multiferroic core-shell nanostructures.

Artificial exchange-biased two-phase core-shell nanostructures consisting of ferromagnetic (Ni) and multiferroic (BiFeO3) materials were manufactured by a two-step method. An exchange bias effect was observed and studied, which indicates that it is possible to fabricate ferromagnetic-multiferroic nanostructures to utilize the combined ferroelectric and antiferromagnetic functionalities of bismuth ferrite.

Efficacy of intraarticular botulinum toxin A and intraarticular hyaluronate plus rehabilitation exercise in patients with unilateral ankle osteoarthritis: a randomized controlled trial.

BACKGROUND: There was an increasing requirement for novel treatments of osteoarthritis (OA). The aim was to compare the efficacy of intraarticular Botulinum toxin type A (BoNT-A) and intraarticular hyaluronate plus rehabilitation exercise in patients with ankle OA. METHODS: This was a prospective, randomized, assessor-blinded study with a 6-month follow-up period, conducted in the outpatient rehabilitation department at a university-affiliated tertiary care medical center. Seventy-five patients with symptomatic ankle OA (Kellgren-Lawrence grade 2) were randomized to receive either a single 100-unit BoNT-A injection into the target ankle (n = 38) or a single hyaluronate injection plus 12 sessions of rehabilitation exercise (30 minutes/day, 3 times/week for 4 weeks) (n = 37). The primary outcome measure was the Ankle Osteoarthritis Scale (AOS). Secondary outcome measures included American Orthopedic Foot and Ankle Society (AOFAS) Ankle/Hindfoot Score, visual analog scale (VAS) for ankle pain, single leg stance test (SLS), Timed "Up-and-Go" test (TUG), consumption of rescue analgesics and global patient satisfaction. RESULTS: There were no significant between-group differences in total AOS scores, pain subscale and disability subscale scores (adjusted mean difference AMD = -0.2, 95% CI = (-0.5, 0.2), p = 0.39; AMD = -0.1, 95% CI = (-0.5, 0.3), p = 0.57; AMD = -0.2, 95% CI = (-0.6, 0.2), p = 0.36). The 2 groups showed no significant differences in AOFAS, VAS, SLS, TUG scores and consumption of rescue analgesics at each follow-up visit, except that the hyaluronate group improved more in SLS than the BoNT-A group at 1-month follow-up. Patients' satisfaction rate was high, with no serious adverse events. There was no difference in adverse events between the two groups (p = 1.00). CONCLUSIONS: Treatment with intraarticular BoNT-A or hyaluronate injection plus rehabilitation exercise was associated with improvements in pain, physical function and balance in patients with ankle OA. These effects were rapid at 2 weeks and might last for at least 6 months. There was no difference in effectiveness between the two interventions. TRIAL REGISTRATION: The trial was registered at clinical trials.gov (Registry number NCT01760577).