Construction of Medusa-Like Adhesive Carbon Nanotube Array Induced by Deformation of Alumina Sheets.

To change the binary structure of nanotube and nanotube array in vertically aligned carbon nanotube arrays, this work deposits regularly arranged amorphous alumina sheets on the classical array growth catalyst (10 nm-thick alumina and 2 nm-thick iron) and obtains an array similar to the Medusa head. Subsequent experiments revealed that these alumina sheets show both unstable and stable qualities during growth: unstable in that they thermally deform and change their newly discovered characteristics of blocking carbon source diffusion, which regulates the nanotube growth order in specific areas; stable in that they withstand the deformation caused by heat and sequential growth of nanotubes, serving as a substrate and buffer layer for Medusa's hair, i.e., nanotube bundles on the array surface. Their combination splits this binary structure into a tertiary architecture consisting of nanotubes, nanotube bundles, and the array spanning nano-, micro-, and milli-meter. Benefiting from this structure, this array exhibits a unique near-isotropic adhesion characteristic compared to existing reports and outperforms classical and patterned arrays with the same classical catalyst and growth conditions.

Sub-terahertz scanning near-field optical microscope using a quartz tuning fork based probe.

We report a sub-terahertz scattering-type scanning near-field microscope (sub-THz s-SNOM) which uses a 6 mm long metallic tip driven by a quartz tuning fork as the near-field probe. Under continuous-wave illumination by a 94 GHz Gunn diode oscillator, terahertz near-field images are obtained by demodulating the scattered wave at both the fundamental and the second harmonic of the tuning fork oscillation frequency together with the atomic-force-microscope (AFM) image. The terahertz near-field image of a gold grating with a period of 2.3 µm obtained at the fundamental modulation frequency agrees well with the AFM image. The experimental relationship between the signal demodulated at the fundamental frequency and the tip-sample distance is well fitted with the coupled dipole model indicating that the scattered signal from the long probe is mainly contributed by the near-field interaction between the tip and the sample. This near-filed probe scheme using quartz tuning fork can adjust the tip length flexibly to match the wavelength over the entire terahertz frequency range and allows for operation in cryogenic environment.

Nanoscale phase separation on an AlGaN surface characterized by scanning diffusion microscopy.

AlGaN is an important material for deep ultraviolet optoelectronic devices and electronic devices. The phase separation on the AlGaN surface means small-scale compositional fluctuations of Al, which is prone to degrade the performance of devices. In order to study the mechanism of the surface phase separation, the Al0.3Ga0.7N wafer was investigated by the scanning diffusion microscopy method based on the photo-assisted Kelvin force probe microscope. The response of the surface photovoltage near the bandgap was quite different for the edge and the center of the island on the AlGaN surface. We utilize the theoretical model of scanning diffusion microscopy to fit the local absorption coefficients from the measured surface photovoltage spectrum. During the fitting process, we introduce as and ab parameters (bandgap shift and broadening) to describe the local variation of absorption coefficients α(as, ab, λ). The local bandgap and Al composition can be calculated quantitatively from the absorption coefficients. The results show that there is lower bandgap (about 305 nm) and lower Al composition (about 0.31) at the edge of the island, compared with those at the center of the island (about 300 nm for bandgap and 0.34 for Al composition). Similar to the edge of the island, there is a lower bandgap at the V-pit defect which is about 306 nm corresponding to the Al composition of about 0.30. These results mean Ga enrichment both at the edge of the island and the V-pit defect position. It proves that scanning diffusion microscopy is an effective method to review the micro-mechanism of AlGaN phase separation.

Pharmacokinetic Analysis of Rosmarinic Acid and its Analog in Rat Plasma Using Liquid Chromatography-Tandem Mass Spectrometry.

The anticancer effects of rosmarinic acid (RA) are a hotspot of current research. In order to enhance its pharmacological activity, N-substituted RA was prepared, and it has been shown to exhibit notable antitumor effects. In order to elucidate the underlying mechanisms of action, pharmacokinetic analysis is necessary. In the present study, liquid chromatography-tandem mass spectrometric method, was used to determine the concentrations of RA and its analog, (E)-3-(3,4-dihydroxyphenyl)-2-(3-(3,4-dihydroxyphenyl)acrylamido)propanoic acid (A2) in plasma from rats. The analyses were divided into a C18 column (1.9 µm, 2.1 mm × 100 mm) with a security guard C18 column (5 µm, 2.1 mm × 10 mm) and a triple-quadrupole mass spectrometry with an electrospray ionization ion-source generates ions. The sample pretreatment is relevant to the one-step protein precipitation with isopropanol:ethyl acetate (v/v, 1:1) This method presented a linear association within ranges at the concentration of 5-2000 ng/mL for A2 and RA. Relative standard deviations in daily courses were <15% and the relative errors registered within 15%. The methods used in the present study make the unambiguous quantification and identification of RA and A2 possible in vivo. The present study is the first to focus on determining A2 and RA in rat plasma following oral administration. The results may provide a meaningful basis for the evaluation of the application of RA and its analog in clinical practice and also provide a reference method for the pharmacokinetic analysis of RA analogs.

Numerical analysis of vibration modes of a qPlus sensor with a long tip.

We study the oscillatory behavior of qPlus sensors with a long tilted tip by means of finite element simulations. The vibration modes of a qPlus sensor with a long tip are quite different from those of a cantilever with a short tip. Flexural vibration of the tungsten tip will occur. The tip can no longer be considered as a rigid body that moves with the prong of the tuning fork. Instead, it oscillates both horizontally and vertically. The vibration characteristics of qPlus sensors with different tip sizes were studied. An optimized tip size was derived from obtained values of tip amplitude, ratio between vertical and lateral amplitude components, output current, and quality factor. For high spatial resolution the optimal diameter was found to be 0.1 mm.