High-efficiency dysprosium-ion extraction enabled by a biomimetic nanofluidic channel.

Biological ion channels exhibit high selectivity and permeability of ions because of their asymmetrical pore structures and surface chemistries. Here, we demonstrate a biomimetic nanofluidic channel (BNC) with an asymmetrical structure and glycyl-L-proline (GLP) -functionalization for ultrafast, selective, and unidirectional Dy3+ extraction over other lanthanide (Ln3+) ions with very similar electronic configurations. The selective extraction mainly depends on the amplified chemical affinity differences between the Ln3+ ions and GLPs in nanoconfinement. In particular, the conductivities of Ln3+ ions across the BNC even reach up to two orders of magnitude higher than in a bulk solution, and a high Dy3+/Nd3+ selectivity of approximately 60 could be achieved. The designed BNC can effectively extract Dy3+ ions with ultralow concentrations and thereby purify Nd3+ ions to an ultimate content of 99.8 wt.%, which contribute to the recycling of rare earth resources and environmental protection. Theoretical simulations reveal that the BNC preferentially binds to Dy3+ ion due to its highest affinity among Ln3+ ions in nanoconfinement, which attributes to the coupling of ion radius and coordination matching. These findings suggest that BNC-based ion selectivity system provides alternative routes to achieving highly efficient lanthanide separation.

Effect of Mn2+ Doping on the Photoluminescence of Hybrid One-Dimensional Lead Halide Post-Perovskites.

Although organic-inorganic hybrid one-dimensional (1D) lead halide postperovskites (LHPPs) have been reported to show white luminescence and tunable photoluminescence quantum yield (PLQY), their structure-property relationships are not fully understood. Here, we used Mn2+ to test the doping effect on the luminescence of two 1D-LHPPs compounds, namely, {TETA[Pb2Br6]}n 1 and {TETA[Pb2Cl6]}n 2, where TETA = triethylenetetrammonium. We found the pristine compounds show yellowish (551 nm) and bluish (447 nm) emission for 1 and 2, respectively, nanosecond excitation lifetimes (4.17 ns for 1 and 2.29 ns for 2) and low PLQYs (4.65 and 3.57% for 1 and 2, respectively). By fine-doping the Mn2+ ions to ca. 8% the PLQYs for 1 and 2 are maximized to 24 and 25% for 1 and 2, respectively. Upon the increasing Mn2+ dopant, the emission wavelengths can also vary gradually from 551 to 615 nm and from 447 to 660 nm for 1 and 2, respectively, covering almost the whole visible-light range, and the excitation lifetimes are enhanced to microseconds (0.77 µs for 1 and 0.39 µs for 2), owing to the more spin-forbidden d-d transition (4T1-6A1) component from the Mn2+ ions present in the photoluminescence spectra. Moreover, these Mn2+-doped 1D-LHPPs demonstrate high structural and optical stability in humid and high-temperature environments. Hence, such doped materials can be fabricated into a UV-pumped white light-emitting diode, rendering the potential application for solid-state lighting and display systems.

TRPM4-Inspired Polymeric Nanochannels with Preferential Cation Transport for High-Efficiency Salinity-Gradient Energy Conversion.

Biological ion channels exhibit switchable cation transport with ultrahigh selectivity for efficient energy conversion, such as Ca2+-activated TRPM4 channels tuned by cation-π interactions, but achieving an analogous highly selective function is challenging in artificial nanochannels. Here, we design a TRPM4-inspired cation-selective nanochannel (CN) assembled by two poly(ether sulfone)s, respectively, with sulfonate acid and indole moieties, which act as cation-selective activators to manage Na+/Cl- selectivity via ionic and cation-π interactions. The cation selectivity of CNs can be activated by Na+, and thereby the Na+ transference number significantly improves from 0.720 to 0.982 (Na+/Cl- selectivity ratio from 2.6 to 54.6) under a 50-fold salinity gradient, surpassing the K+ transference number (0.886) and Li+ transference number (0.900). The TRPM4-inspired nanochannel membrane enabled a maximum output power density of 5.7 W m-2 for salinity-gradient power harvesting. Moreover, a record energy conversion efficiency of up to 46.5% is provided, superior to most nanochannel membranes (below 30%). This work proposes a novel strategy to biomimetic nanochannels for highly selective cation transport and high-efficiency salinity-gradient energy conversion.

Quasi-distributed quartz enhanced photoacoustic spectroscopy sensing based on hollow waveguide micropores.

In this Letter, a quasi-distributed quartz enhanced photoacoustic spectroscopy (QEPAS) gas sensing system based on hollow waveguide micropores (HWGMP) was reported for the first time, to the best of our knowledge. Three micropores were developed on the HWG to achieve distributed detection units. Three self-designed quartz tuning forks (QTFs) with low resonant frequency of 8.7 kHz were selected as the acoustic wave transducer to improve the detection performance. Compared with micro-nano fiber evanescent wave (FEW) QEPAS, the HWGMP-QEPAS sensor has advantages such as strong anti-interference ability, low loss, and low cost. Acetylene (C2H2) was selected as the target gas to verify the characteristics of the reported sensor. The experimental results showed that the three QTFs almost had the same sensing ability and possessed an excellent linear concentration response to C2H2. The minimum detection limits (MDLs) for the three QTFs were determined as 68.90, 68.31, and 66.62 ppm, respectively. Allan deviation analysis indicated that the system had good long-term stability, and the MDL can be improved below 3 ppm in an average time of 1000 s.

Tumor-repopulating cells evade ferroptosis via PCK2-dependent phospholipid remodeling.

Whether stem-cell-like cancer cells avert ferroptosis to mediate therapy resistance remains unclear. In this study, using a soft fibrin gel culture system, we found that tumor-repopulating cells (TRCs) with stem-cell-like cancer cell characteristics resist chemotherapy and radiotherapy by decreasing ferroptosis sensitivity. Mechanistically, through quantitative mass spectrometry and lipidomic analysis, we determined that mitochondria metabolic kinase PCK2 phosphorylates and activates ACSL4 to drive ferroptosis-associated phospholipid remodeling. TRCs downregulate the PCK2 expression to confer themselves on a structural ferroptosis-resistant state. Notably, in addition to confirming the role of PCK2-pACSL4(T679) in multiple preclinical models, we discovered that higher PCK2 and pACSL4(T679) levels are correlated with better response to chemotherapy and radiotherapy as well as lower distant metastasis in nasopharyngeal carcinoma cohorts.

Quantum-Geometry-Induced Anomalous Hall Effect in Nonunitary Superconductors and Application to Sr_{2}RuO_{4}.

The polar Kerr effect and the closely related anomalous charge Hall effect are among the most distinguishing signatures of the superconducting state in Sr_{2}RuO_{4}, as well as in several other compounds. These effects are often thought to be derived from chiral superconducting pairing, and different mechanisms have been invoked for the explanation. However, the intrinsic mechanisms proposed previously often involve unrealistically strong interband Cooper pairing. We show in this Letter that, even without interband pairing, nonunitary superconducting states can support the intrinsic anomalous charge Hall effect, thanks to the quantum geometric properties of the Bloch electrons. The key here is to have a normal-state spin Hall effect, for which a nonzero spin-orbit coupling is essential. A finite charge Hall effect then naturally arises at the onset of a spin-polarized nonunitary superconducting pairing. It depends on both the spin polarization and the normal-state electron Berry curvature, the latter of which is the imaginary part of the quantum geometric tensor of the Bloch states. Applying our results to the weakly paired Sr_{2}RuO_{4} we conclude that, if the reported Kerr effect is of intrinsic origin, the superconducting state is most likely nonunitary and has odd parity. Our theory may be generalized to other superconductors that exhibit the polar Kerr effect.

Ion-Concentration-Hopping Heterolayer Gel for Ultrahigh Gradient Energy Conversion.

Conventional solid ion channel systems relying on single one- or two-dimensional confined nanochannels enabled selective and ultrafast convective ion transport. However, due to intrinsic solid channel stacking, these systems often face pore-pore polarization and ion concentration blockage, thereby restricting their efficiency in macroscale ion transport. Here, we constructed a soft heterolayer-gel system that integrated an ion-selective hydrogel layer with a water-barrier organogel layer, achieving ultrahigh cation selectivity and flux and effectively providing high-efficiency gradient energy conversion on a macroscale order of magnitude. Specifically, the hydrogel layer featured an unconfined 3D network, where the fluctuations of highly hydrated polyelectrolyte chains driven by thermal dynamics enhanced cation selectivity and mitigated transfer energy barriers. Such chain fluctuation mechanisms facilitated ion-cluster internal transmission, thereby enhancing ion concentration hopping for more efficient ion-selective transport. Compared to the existing rigid nanochannel-based gradient energy conversion systems, such a heterogel-based power generator exhibited a record power density of 192.90 and 1.07 W/m2 at the square micrometer scale and square centimeter scale, respectively (under a 500-fold artificial solution). We anticipate that such heterolayer gels would be a promising candidate for energy separation and storage applications.

Ultrahigh Critical Current Density across Sliding Electrical Contacts in Structural Superlubric State.

In conventional sliding electrical contacts (SECs), large critical current density (CCD) requires a high ratio between actual and apparent contact area, while low friction and wear require the opposites. Structural superlubricity (SSL) has the characteristics of zero wear, near zero friction, and all-atoms in real contact between the contacting surfaces. Here, we show a measured current density up to 17.5 GA/m^{2} between microscale graphite contact surfaces while sliding under ambient conditions. This value is nearly 146 times higher than the maximum CCD of other SECs reported in literatures (0.12 GA/m^{2}). Meanwhile, the coefficient of friction for the graphite contact is less than 0.01 and the sliding interface is wear-free according to the Raman characterization, indicating the presence of the SSL state. Furthermore, we estimate the intrinsic CCD of single crystalline graphite to be 6.69 GA/m^{2} by measuring the scaling relation of CCD. Theoretical analysis reveals that the CCD is limited by thermal effect due to the Joule heat. Our results show the great potential of the SSL contacts to be used as SECs, such as micro- or nanocontact switches, conductive slip rings, or pantographs.

Mid-infrared all-fiber light-induced thermoelastic spectroscopy sensor based on hollow-core anti-resonant fiber.

In this article, a mid-infrared all-fiber light-induced thermoelastic spectroscopy (LITES) sensor based on a hollow-core anti-resonant fiber (HC-ARF) was reported for the first time. The HC-ARF was applied as a light transmission medium and gas chamber. The constructed all-fiber structure has merits of low loss, easy optical alignment, good system stability, reduced sensor size and cost. The mid-infrared transmission structure can be utilized to target the strongest gas absorption lines. The reversely-tapered SM1950 fiber and the HC-ARF were spatially butt-coupled with a V-shaped groove between the two fibers to facilitate gas entry. Carbon monoxide (CO) with an absorption line at 4291.50 cm-1 (2.33 µm) was chosen as the target gas to verify the sensing performance. The experimental results showed that the all-fiber LITES sensor based on HC-ARF had an excellent linear response to CO concentration. Allan deviation analysis indicated that the system had excellent long-term stability. A minimum detection limit (MDL) of 3.85 ppm can be obtained when the average time was 100 s.

Fine Tuning Ag(I)-Sb(III) Hybrid Iodides for Light Detection.

Lead-free hybrid double perovskite iodides (HDPIs) have piqued increasing research interest due to their environmental friendliness and high stability. However, such antimony-based HDPIs with strong photocurrent response are currently very limited. Here, we successfully design and construct five Ag(I)-Sb(III)-based HDPIs using two types of cyclic aliphatic amines as A-site templates. Interestingly, these Ag(I)-Sb(III) HDPIs exhibit relatively narrow band gaps, preferred orientation, and high stability after being processed into thin films on the indium tin oxide (ITO) substrate. Notably, under illuminations of a xenon lamp, all HDPIs exhibit considerable photocurrent responses, reaching a maximum difference of 17 µA·cm-2 for ASI 1, which is the highest among lead-free halogen-based organic-inorganic hybrid compounds to date. Combining the considerable photocurrents and the high stability, the optoelectronic applications of two-dimensional Ag(I)-Sb(III) HDPIs can be expected.

Gradient Quasi-Solid Electrolyte Enables Selective and Fast Ion Transport for Robust Aqueous Zinc-Ion Batteries.

The quasi-solid electrolytes (QSEs) attract extensive attention due to their improved ion transport properties and high stability, which is synergistically based on tunable functional groups and confined solvent molecules among the polymetric networks. However, the trade-off effect between the polymer content and ionic conductivity exists in QSEs, limiting their rate performance. In this work, the epitaxial polymerization strategy is used to build the gradient hydrogel networks (GHNs) covalently fixed on zinc anode. Then, it is revealed that the asymmetric distribution of negative charges benefits GHNs with fast and selective ionic transport properties, realizing a higher Zn2+ transference number of 0.65 than that (0.52) for homogeneous hydrogel networks (HHNs) with the same polymer content. Meanwhile, the high-density networks formed at Zn/GHNs interface can efficiently immobilize free water molecules and homogenize the Zn2+ flux, greatly inhibiting the water-involved parasitic reactions and dendrite growth. Thus, the GHNs enable dendrite-free stripping/plating over 1000 h at 8 mA cm-2 and 1 mAh cm-2 in a Zn||Zn symmetric cell, as well as the evidently prolonged cycles in various full cells. This work will shed light on asymmetric engineering of ion transport channels in advanced quasi-solid battery systems to achieve high energy and safety.

Filtering Robust Graphite without Incommensurate Interfaces by Electrical Technique.

Two-dimensional (2D) van der Waals (vdW) layered materials have attracted considerable attention due to their potential applications in various fields. Among these materials, graphite is widely employed to achieve structural superlubricity (SSL), where the interfacial friction between two solids is almost negligible and the wear is zero. However, the development of integrated SSL systems using graphite flakes still faces a major obstacle stemming from the inherent delamination-induced instability in vdW layered materials. To address this issue, we propose a nondestructive filtering technique that utilizes electrical measurement to identify robust graphite flakes without delamination. Our experimental results confirm that all the filtered graphite flakes exhibit delamination-free behavior after more than 7000 cycles of sliding on a series of 2D and 3D substrates. Besides, we employ three types of characterizing methods to confirm that the filtering process does not impair the graphite flakes. Moreover, with focused ion beam (FIB) assisted slicing characterization and statistical analysis, we have discovered that all of the filtered flakes possess a graphite layer thickness below 100 nm. This is consistent with the thickness of the single crystalline graphite layer of our samples reported in the literature, suggesting the absence of incommensurate interfaces in the filtered graphite flakes. Our work contributes to a deeper understanding of the relationship between graphite conductance and incommensurate interfaces. In addition, we present a possible solution to address the delamination problem in layered materials, and this technique shows the potential to characterize the internal microstructure of grains and the distribution of grain boundaries in vdW materials on a large scale.

Cascade-heterogated biphasic gel iontronics for electronic-to-multi-ionic signal transmission.

Currently, electronics and iontronics in abiotic-biotic systems can only use electrons and single-species ions as unitary signal carriers. Thus, a mechanism of gating transmission for multiple biosignals in such devices is needed to match and modulate complex aqueous-phase biological systems. Here we report the use of cascade-heterogated biphasic gel iontronics to achieve diverse electronic-to-multi-ionic signal transmission. The cascade-heterogated property determined the transfer free energy barriers experienced by ions and ionic hydration-dehydration states under an electric potential field, fundamentally enhancing the distinction of cross-interface transmission between different ions by several orders of magnitude. Such heterogated or chemical-heterogated iontronics with programmable features can be coupled with multi-ion cross-interface mobilities for hierarchical and selective cross-stage signal transmission. We expect that such iontronics would be ideal candidates for a variety of biotechnology applications.

CT Findings of Undifferentiated Pancreatic Cancer With Osteoclast-Like Giant Cells: A Case Series from a Single Center's Experience With 10 Cases.

Little is known about the imaging features of undifferentiated carcinoma with osteoclast-like giant cells of the pancreas (UCOGCP) because of its extremely low incidence. To improve the diagnostic accuracy of this tumor, 10 UCOGCP cases with confirmed histopathology were collected and their clinical and image data features were analyzed. We found that the median age of our study was 61 years (50-76 years in range) and the main clinical manifestations were nonspecific abdominal pain. There were some differences in the degree of enhancement and computed tomography (CT) features between the tumor located at the head and body or tail of the pancreas. Perhaps these subtle imaging findings can provide valuable diagnostic information.

Hollow-waveguide-based light-induced thermoelastic spectroscopy sensing.

In this Letter, a hollow waveguide (HWG)-based light-induced thermoelastic spectroscopy (LITES) gas sensing is proposed. An HWG with a length of 65 cm and inner diameter of 4 mm was used as the light transmission medium and gas chamber. The inner wall of the HWG was coated with a silver (Ag) film to improve reflectivity. Compared with the usually used multi-pass cell (MPC), the HWG has many advantages, such as small size, simple structure and fast filling. Compared with a hollow-core anti-resonant fiber (HC-ARF), the HWG has the merits of easy optical coupling, high system stability, and wide transmission range. A diode laser with output wavelength of 1.53 µm and a quantum cascade laser (QCL) with output wavelength of 4.58 µm were selected as the sources of excitation to target acetylene (C2H2) and carbon monoxide (CO), respectively, to verify the performance of the HWG-based LITES sensor in the near-infrared and mid-infrared regions. The experimental results showed that the HWG-based LITES sensor had a great linear responsiveness to the target gas concentration. The minimum detection limit (MDL) for C2H2 and CO was 6.07 ppm and 98.66 ppb, respectively.

Neuron-Inspired Nanofluidic Biosensors for Highly Sensitive and Selective Imidacloprid Detection.

Pesticides have caused concerns about food safety due to their residual effects in vegetables and fruits. Imidacloprid, as the frequently used neonicotinoid pesticide, could harm cardiovascular and respiratory function and cause reproductive toxicity in humans. Therefore, reliable methods for portable, selective, and rapid detection are desirable to develop. Herein, we report a neuron-inspired nanofluidic biosensor based on a tyrosine-modified artificial nanochannel for sensitively detecting imidacloprid. The functional tyrosine is modified on the outer surface of porous anodic aluminum oxide to rapidly capture imidacloprid through π-π interactions and hydrogen bonds. The integrated nanofluidic biosensor has a wide concentration range from 10-8 to 10-4 g/mL with an ultralow detection limit of 6.28 × 10-9 g/mL, which outperforms the state-of-the-art sensors. This work provides a new perspective on detecting imidacloprid residues as well as other hazardous pesticide residues in environmental and food samples.

Association between pelvic floor muscle strength and sexual function based on PISQ-12-an analysis of data from a multicenter cross-sectional study on 735 nulliparae during pregnancy.

Background: Pelvic floor muscle strength is well-known to be associated with female sexual function. However, there were a few studies that reported on the relationship between pelvic floor muscle strength and female sexual function in pregnant women, and the presented results were inconsistent. Nulliparae represent a specific cohort with simplicity to exclude confounding factors that are caused by parity. The present study aimed to explore the association of pelvic floor muscle strength and sexual function based on the Pelvic Organ Prolapse/Urinary Incontinence Sexual Questionnaire (PISQ-12) of nulliparae during pregnancy. Methods: This is the second analysis of the baseline data from a randomized controlled trial (RCT), which aimed to study the protective efficacy of pelvic floor muscle training on stress urinary incontinence at 6th week postpartum (registration number: ChiCTR2000029618). Nulliparae aged 20-40 years with singleton pregnancy before 16 weeks of gestation were enrolled in this study, and data, including participants' demographic information, the Modified Oxford Scale (MOS), and PISQ-12, were collected. Eligible nulliparae were divided into two groups: Group MOS > 3 and Group MOS ≤ 3. Demographic information of the two groups was compared. Sexual function based on the PISQ-12 scores of the two groups was compared. A comparison of the PISQ-12 scores between the two groups was calculated by the Mann-Whitney U-test using SPSS version 23.0. Results: A total of 735 eligible nulliparae were enrolled in this study. Along with MOS grading up, PISQ-12 scores tended to get lower. Of the 735 nulliparae, there were 378 and 357 participants included in Group MOS > 3 and Group MOS ≤ 3, respectively. The PISQ-12 scores of Group MOS > 3 were significantly lower than those of Group MOS ≤ 3 (11 vs. 12, p < 0.001). The scores of the frequency of feeling sexual desire, orgasm achievement, sexual excitement, sexual activity satisfaction, sexual intercourse pain, fear of urinary incontinence, and negative emotion reactions with the sexual intercourse of Group MOS > 3 were lower than those of Group MOS ≤ 3 (p < 0.05). Conclusion: Pelvic floor muscle strength was positively associated with sexual function based on the questionnaire of young nulliparae during their first trimester. Up to half of the nulliparae during the first trimester were suffering from weak pelvic floor muscle strength and nearly a quarter of the nulliparae were facing this weakness combined with sexual dysfunction. Trial registration: This study has been registered at http://www.chictr.org.cn (registration number: ChiCTR2000029618).

Recent Advances of Fe(III)/Fe(II)-MPNs in Biomedical Applications.

Metal-phenolic networks (MPNs) are a new type of nanomaterial self-assembled by metal ions and polyphenols that have been developed rapidly in recent decades. They have been widely investigated, in the biomedical field, for their environmental friendliness, high quality, good bio-adhesiveness, and bio-compatibility, playing a crucial role in tumor treatment. As the most common subclass of the MPNs family, Fe-based MPNs are most frequently used in chemodynamic therapy (CDT) and phototherapy (PTT), where they are often used as nanocoatings to encapsulate drugs, as well as good Fenton reagents and photosensitizers to improve tumor therapeutic efficiency substantially. In this review, strategies for preparing various types of Fe-based MPNs are first summarized. We highlight the advantages of Fe-based MPNs under the different species of polyphenol ligands for their application in tumor treatments. Finally, some current problems and challenges of Fe-based MPNs, along with a future perspective on biomedical applications, are discussed.

Modulation of the magnetic dynamics in two air-stable sulfur-ligated dysprosium complexes via polymerization.

Two air-stable sulfur-ligated dysprosium(III) complexes [HN(Et)3][Dy2NaL8] (1) and [DyNaL4(MeOH)x(H2O)2-x]n (2) based on 2-pyridinethiol 1-oxide (HL) were synthesized and structurally characterized. Discrete 1 and polymeric 2 share the same anionic unit of [DyL4]- with the O4S4 coordination environment, but differ in the precise geometry with triangular dodecahedron geometry in 1 and biaugmented trigonal prism geometry in 2. The subtle change leads to observable temperature-independent relaxation for 2 while a faster relaxation with invisible peak for 1 at zero dc field. Under an optimal dc field, both display the typical Raman process with a smaller pre-factor and higher exponent for 2. Ab initio calculations reveal that the predicted energy barriers are 287 cm-1 for 1 and 303 cm-1 for 2. These results demonstrate the construction and magnetic modulation of air-stable sulfur-ligated Dy-SMM architectures.

Electron-Rich MoIV 3 -Polyoxomolybdates Resembling the Paratungstic Archetype.

The first polyoxometalates (POMs) composed of MoIV , MoV 2 , discrete d1 -MoV and MoVI , [MoIV 3 MoV 6 MoVI 4 O32 (µ2 -OH)(µ3 -OH)py9 ] (1), was prepared from the solvothermal partial oxidation of [MoIV 3 O2 (O2 CCH3 )6 (H2 O)3 ]ZnCl4 in a mixture of pyridine and water. The MoV =O adduct-free unit [H2 Mo12 O33 py9 ] presents the 11e-reduced Mo derivative of the paratungtic archetype. The use of methanol, ethanol, n-propyl alcohol and triglycol instead of water produced the isostructural [MoIV 3 MoV 6 MoVI 4 O32 (µ3 -OH)(µ2 -OR)py9 ](R=CH3 , 2; C2 H5 , 3; C3 H7 , 4; C2 H4 OH, 5), providing the first examples of MoIV 3 -POMs containing bridging alkoxyl groups. The addition of [CrIII Mo6 O24 ]9- led to the substitution of {MoV =O}3+ with {CrIII -py}3+ in the allomer [MoIV 3 MoV 5 MoVI 4 CrIII O32 (µ-OH)2 py10 ] (6). Using a mixture of Mo3 and MoW2 precursors afforded WVI -incorporated allomer [MoIV 3 MoV 6 MoVI WVI 3 O32 (µ-OH)2 py9 ] (7). The complete substitution of MoVI with WVI by using a mixture of the Mo2 W, MoW2 and W3 precursors produced the diamagnetic [MoIV 3 MoV 6 WVI 4 O33 (µ3 -OH)py9 ]- (syn-8) resulting from the anti→syn conversion between the top and bottom M3 triads concomitant with MoV -MoV bonding. Both anti-1-7 and syn-8 have been characterized by X-ray single crystal structural analyses. The spin distribution and magnetic interactions have been investigated by temperature-dependent magnetic susceptibility and DFT theoretical calculations. Heterogeneous hydrogen transfer catalysis has been examined by the Lewis catalysis field (LCF) theory.