Significant increase of the photoresponse range and conductivity for a chalcogenide semiconductor by viologen coating through charge transfer.

Widening the photoresponse range while enhancing the electrical properties of semiconductors could reduce the complexity and cost of photodetectors or increase the power conversion efficiency of solar cells. Surface doping through charge transfer with organic species is one of the most effective and widely used approaches to achieve this aim. It usually features easier preparation over other doping methods but is still limited by the low physicochemical stability and high cost of the used organic species or low improvement of electrical properties. This work shows unprecedented surface doping of semiconductors with highly stable, easily obtained, and strong electron-accepting viologen components, realizing the significant improvement of both the photoresponse range and conductivity. Coating the chalcogenide semiconductor KGaS2 with dimethyl viologen dichloride (MV) yields a charge-transfer complex (CTC) on the surface, which broadens the photoresponse range by nearly 300 nm and improves the conductivity by 5 orders of magnitude. The latter value surpasses all records obtained by surface doping through charge transfer with organic species.

Cs4 Zn5 P6 S18 I2 : the Largest Birefringence in Chalcohalide Achieved by Highly Polarizable Nonlinear Optical Functional Motifs.

Chalcohalides not only keep the balance between the nonlinear optical (NLO) coefficient and wide band gap, but also provide a promising solution to achieve sufficient birefringence for phase-matching ability in NLO crystals. In this study, a novel chalcohalide, Cs4 Zn5 P6 S18 I2 (1) is successfully synthesized, by incorporating the highly electropositive Cs and the large electronegative I element into the zinc thiophosphate. Its 3D open framework features an edge-shared by distorted [ZnS4 ], ethanol-like [P2 S6 ], and unusual [ZnS2 I2 ] polyhedrons, which is inconsistent with the soft-hard-acids-bases theory. Remarkably, compound 1 simultaneously exhibits the large second-harmonic generation (SHG, 1.1×AgGaS2 , @1.3 µm) and a wide band gap (3.75 eV) toward a high laser-induced damage threshold (16.7×AgGaS2 , @1.06 µm), satisfying the rigorous requirements for a prominent infrared NLO material with concurrent SHG intensity (≥0.5×AGS) and band gap (≥3.5 eV). Moreover, to the best of the knowledge, the experimental result shows that phase 1 has the largest birefringence (0.108, @546 nm) in chalcohalide and meets phase-matching behavior demand originating from the polarizable anisotropy of NLO-functional motifs. This finding may provide great opportunities for designing birefringent chalcohalides.

Breaking the bottleneck of simultaneously wide band gap and large nonlinear optical coefficient by a "pore reconstruction" strategy in a salt-inclusion chalcogenide.

The template-based design of the crystal structure is a direct and highly efficient method to achieve optimal nonlinear optical (NLO, meaning second-order NLO) performances. The structural flexibility of porous salt-inclusion chalcogenides (SICs) provides an alternative platform for modulating the enlargement of the band gap (that is generally positive with laser-induced damage threshold) and second harmonic generation (SHG) response simultaneously. By applying the "pore reconstruction" strategy to SIC [K3Cl][Mn2Ga6S12] (1), a new derivative K3Rb3[K3Cl][Li2Mn4Ga12S27] (2) is successfully isolated, which unusually features a heterologous nanopore framework with inner diameters of 8.90 and 9.16 Å. Guided by such a strategy, compound 2 possesses the widest band gap (3.31 eV) among the magnetic NLO chalcogenides; this finding is dominantly attributed to the porous structure and the "dimensional deduction" effect. Moreover, phase 2 displays a remarkable phase-matchable SHG intensity (1.1 × AgGaS2 at the incident laser of 1910 nm) that originated from the oriented alignment of NLO-functional motifs, as well as the rich terminal S atoms in the nanopore structure. Furthermore, the "pore reconstruction" strategy offers an efficient pathway to explore potential NLO candidates with excellent comprehensive performances; in particular, it settles the conflicting issue of enhancing the band gap (>3.0 eV) and SHG intensity (>1.0 × AgGaS2) concurrently.

Open honeycomb frameworks of sulphides AHg4Ga5S12 (A = Rb, Cs) exhibiting infrared nonlinear optical properties.

A crystal structure with a diamond-like anionic framework belongs to a non-centrosymmetric macrostructure due to the aligned arrangement of tetrahedral units, meeting the premise of second-order nonlinear optical (NLO) materials. Herein, two new Hg-based sulphides, namely RbHg4Ga5S12 (1) and CsHg4Ga5S12 (2), which are isostructural and crystallise in the trigonal space group R3, are successfully isolated in sealed silica tubes by a solid-state reaction. The features of their three-dimensional open honeycomb frameworks are attributed to the parallel alignment of tetrahedral MS4 (M is disordered by 0.444 Hg and 0.555 Ga) building motifs, accompanied by Rb+ (or Cs+) reseating in the cavities. Notably, although the band gap values of 1 and 2 are 2.30 and 2.36 eV, separately, their thermal expansion anisotropies (0.15 and 0.41, respectively) are favourable for achieving laser-induced damage thresholds (5.6 and 5.8 times that of AgGaS2 for 1 and 2, respectively). In addition, the strong polarisability of tetrahedral MS4 building motifs in the diamond-like anionic structures is responsible for the promising second-harmonic generation (SHG) intensities (1.1 and 1.8 times that of AgGaS2 for 1 and 2, respectively) in the particle size range of 50-75 µm with non-phase-matchable behaviour at 1910 nm. Furthermore, theoretical investigation elaborates that electron transitions in compounds 1 and 2 mainly occur from valence band S-3p to conduction band Hg-6s and Ga-4s states, demonstrating that the linear and nonlinear optical properties originate primarily from the synergy of tetrahedral MS4 units.

Advances in research on 3C-like protease (3CLpro) inhibitors against SARS-CoV-2 since 2020.

COVID-19 caused by SARS-CoV-2 in late 2019 is still threatening global human health. Although some vaccines and drugs are available in the market, controlling the spread of the SARS-CoV-2 virus remains a huge challenge. 3C-like protease (3CLpro) is a highly conserved key protease for SARS-CoV-2 replication, and no relevant homologous protein with a similar cleavage site to 3CLpro has been identified in humans, highlighting that development of 3CLpro inhibitors exhibits great promise for treatment of COVID-19. In this review, the authors describe the structure and function of 3CLpro. To better understand the characteristics of SARS-CoV-2 3CLpro inhibitors, the SARS-CoV-2 3CLpro inhibitors reported since 2020 are classified into peptidomimetic covalent inhibitors, non-peptidomimetic covalent inhibitors and non-covalent small molecule inhibitors, and the representative inhibitors, their biological activities and binding models are highlighted. Collectively, we hope that all the information presented here will provide new insights into the design and development of more effective 3CLpro inhibitors against SARS-CoV-2 as novel anti-coronavirus drugs.

[K2 PbX][Ga7 S12 ] (X = Cl, Br, I): The First Lead-Containing Cationic Moieties with Ultrahigh Second-Harmonic Generation and Band Gaps Exceeding the Criterion of 2.33 eV.

In contrast to anionic group theory of nonlinear optical (NLO) materials that second-harmonic generation (SHG) responses mainly originate from anionic groups, structural regulation on the cationic groups of salt-inclusion chalcogenides (SICs) is performed to make them also contribute to the NLO effects. Herein, the stereochemically active lone-electron-pair Pb2+ cation is first introduced to the cationic groups of NLO SICs, and the resultant [K2 PbX][Ga7 S12 ] (X = Cl, Br, I) are isolated via solid-state method. The features of their three-dimensional structures comprise highly oriented [Ga7 S12 ]3- and [K2 PbX]3+ frameworks derived from AgGaS2 , which display the largest phase-matching SHG intensities (2.5-2.7 × AgGaS2 @1800 nm) among all SICs. Concurrently, three compounds manifest band gap values of 2.54, 2.49, and 2.41 eV (exceeding the criterion of 2.33 eV), which can avoid two-photon absorption under the fundamental laser of 1064 nm, along with the relatively low anisotropy of thermal expansion coefficients, leading to improved laser-induced damage thresholds (LIDTs) values of 2.3, 3.8, and 4.0 times that of AgGaS2 . In addition, the density of states and SHG coefficient calculations demonstrate that the Pb2+ cations narrow the band gaps and benefit SHG responses.

AAg3Ga8Se14 (A = Rb, Cs): second-harmonic generation responses realized through the parallel arrangement of AgSe4 and GaSe4 tetrahedrons.

Two new quaternary selenides AAg3Ga8Se14, (A = Rb, 1; Cs, 2) were synthesised via solid-state reaction in sealed silica tubes. Compounds 1 and 2 crystallised in the monoclinic space group Cm (no. 8) and their three-dimensional [Ag3Ga8Se14]- anionic frameworks were comprised of AgSe4 and GaSe4 tetrahedrons. Their UV-Vis-near infrared diffuse reflectance spectra showed that 1 and 2 possessed wide band gaps of 2.17 and 2.10 eV, respectively. Notably, under incident laser irradiation at 1910 nm, compounds 1 and 2 presented moderate second-harmonic generation responses of 0.6 and 0.7 × AgGaS2, respectively, with phase-matching behaviours due to the parallel arrangement of nonlinear optical (NLO) functional tetrahedral AgSe4 and GaSe4 units. The laser-induced damage thresholds of 1 and 2 were estimated to be 25.4 and 18.0 MW cm-2, respectively, which were 2.1 and 1.5 times the threshold of AgGaS2. This study revealed that the title selenides, which were constructed from tetrahedral units arranged in a parallel array, are promising infrared NLO materials.

Effect of mutations across reverse transcriptase region on HBV replication and progression of liver diseases in Chinese patients.

It was known that mutations in the RT region were mainly related to nucleot(s)ide analogs resistance. Increasing studies indicated that RT mutations were related to advanced liver diseases (ALD) and had effects on HBV replication, but the distribution characteristics of mutations across RT region in the development of liver diseases and the effect of RT mutations on HBV replication were not fully clarified. HBV RT region was direct-sequenced in 1473 chronic HBV-infected patients. Mutation frequencies were analyzed to identify the specific mutations differing between groups classified by genotypes, loads of HBV DNA, or progression of liver diseases. In the range of rt145-rt290, rt145, rt221, rt222, rt267, and rt271 were the genotype-polymorphic sites, while rt238 was the genotype-specific sites. Mutations at rt163, rt173, rt180, rt181, rt184, rt191, rt199, and rt214 were more frequent among patients with C-genotype HBV, while those at rt220, rt225, rt226, rt269, and rt274 were more frequent among patients with B-genotype HBV. RtM204V/I could reduce the HBV DNA loads while rtQ/L267H/R could increase the HBV DNA loads. RtV214A/E/I (OR 3.94, 95% CI 1.09 to 14.26) was an independent risk factor for advanced liver diseases. In summary, the hotspots of mutations were different between B and C genotypes. Besides the effect on the S region, RT mutations had effects on HBV replication by other unknown ways. RtV214A/E/I was found to be an independent risk factor for ALD, suggesting that mutations at rt214 site could be used as a potential virological marker for the liver disease progression.

Photocurrent, humidity sensitivity and proton conductivity properties of a new sulfide semiconductor CsCuS4.

Copper chalcogenides have drawn considerable attention due to their prominent semiconducting properties. A new Cu-containing semiconductor, namely, CsCuS4 (1), was obtained by a halide salt flux method. Its structure featured 1D infinite ∞1[CuS4] - chains, where the polysulfide anion S42- was relatively rare in Cu chalcogenides. The compound was multifunctional and exhibited significant photocurrent, humidity sensitivity, and proton conductivity properties. Specifically, it exhibits an "on" state photocurrent response of 0.95 µA cm-2 and an "off" state photocurrent response of 0.55 µA cm-2 with good reversibility. The humidity-sensitive resistance in dry air (10% RH) could reach up to six orders of magnitude higher than that in wet air (100% RH). Compound 1 showed an activation energy of 0.19 eV and may have potential electrochemical applications.

Optimizing the Nonlinear Optical Performance of an A-N-M-Q (A: Alkali Metal; N: d10 Metal; M: Main Group Metal; Q: Chalcogen) System.

Exploring new infrared nonlinear optical (IR NLO) materials with superior overall properties is scientifically and technically important. However, large second-order harmonic generation (SHG) efficiencies and high laser-induced damage thresholds (LIDT) are incompatible, which makes realizing this goal a challenge. The IR NLO performance of an A-NIIB-MIIIA-Q (Q: chalcogen) system was optimized by simultaneously modulating A/(M + N) and M/N ratios (A: alkali metal; N, M: tetra-coordinated metals), and SHG-LIDT balance was achieved. Three new sulfides, KCd3Ga5S11 (1), RbCd4Ga3S9 (2), and Cs2Cd2Ga8S15 (3), containing the same CdS4 and GaS4 but with different A/(Ga + Cd) and Ga/Cd ratios were obtained. Among these compounds, compound 3 exhibits both the largest SHG efficiency (0.5 × AgGaS2) and LIDT (35 × AgGaS2), which can be ascribed to the Ga/Cd modulation for enhancing the NLO functional motif distortions and SHG efficiency as well as the A/(Ga + Cd) modulation for enlarging the band gap and LIDT. Remarkably, compound 3 is the first phase-matchable IR NLO material in the A-NIIB-MIIIA-Q family. This article proposes a novel avenue to explore infrared nonlinear materials with superior comprehensive properties by modulating the A/(M + N) and M/N ratios.

Balanced infrared nonlinear optical performance achieved by modulating the covalency and ionicity distributions in the electron localization function map.

The nonlinear optical (NLO) efficiency (dij) and laser-induced damage threshold (LIDT) of a material are mainly determined by their covalency and ionicity, respectively, the incompatibility between which makes balancing the dij and LIDT challenging in an IR NLO material. The topological feature (fractal dimension) of the electron localization function (ELF) map (distribution of covalency and ionicity) was evaluated for a series of NLO materials, and, phenomenologically, the fine mixing of covalency and ionicity will benefit a balanced dij and LIDT. Chemical bonds with different interaction strengths were introduced simultaneously to mix the covalency and iconicity finely, and three new IR NLO sulfides, A2Ba3Li6Ga28S49 (A = K, 1; Rb, 2; Cs, 3), were obtained. They exhibit a strong NLO efficiency (1.9-2.1 × AgGaS2 at 1064 nm and 0.5-0.6 × AgGaS2 at 1910 nm) and high LIDTs (16.7-18.0 × AgGaS2), which fulfill the criteria of being promising IR NLO candidates. This study provides a new method for designing high-performance IR NLO materials based on the topological features of the ELF.

miR-200b-3p mitigates oxaliplatin resistance via targeting TUBB3 in colorectal cancer.

BACKGROUND: Numerous abnormally expressed miRs have been reported involved in oxaliplatin (L-OHP) resistance of colorectal cancer (CRC). The present study aimed to investigate whether miR-200b-3p could regulate L-OHP resistance via targeting TUBB3 in CRC cells. METHODS: L-OHP resistant HT29 and HCT116 cells were exposed to escalating concentrations of L-OHP up to 30 µm. The effect of miR-200b-3p on L-OHP resistant CRC cells was then evaluated using the cell counting kit-8 (CCK-8) assay. CRC cell apoptosis was detected using Annexin V-FITC/PI double staining. Bioinformatics algorithms and luciferase reporter assays were also performed to investigate whether TUBB3 was a direct target of miR-200b-3p. RESULTS: miR-200b-3p declined in L-OHP resistant CRC tissues and cell lines, and the overexpression of miR-200b-3p elevated the L-OHP sensitivity in L-OHP resistant HT29 and HCT116 cells. In addition, we determined the potential mechanisms underlying miR-200b-3p-mediated reversal of L-OHP resistance by mediating its downstream target TUBB3, and the overexpression of miR-200b-3p could induce migration and growth inhibition and apoptosis in L-OHP resistant HT29 and HCT116 cells by silencing ßIII-tubulin protein expression. However, the overexpression of TUBB3 reversed miR-200b-3p mimic-induced migration, as well as growth inhibition and apoptosis, in L-OHP resistant CRC cells. CONCLUSIONS: miR-200b-3p improved L-OHP resistance and induced growth inhibition and cell apoptosis in L-OHP resistant CRC cells, and the underlying mechanism was mediated, at least partially, through the suppression of ßIII-tubulin protein expression.

[Effects of aqueous extracts of gecko on stemness of hepatocellular carcinoma].

To explore the effects and mechanism of aqueous extracts of gecko on cancer stem cells properties of hepatocellular carcinoma. In vitro, MTT assay was used to detect the cells growth in Huh7 and Hep3B. Spheroid-forming assay and flow cytometry were performed to observe the the stemness of Huh7 and Hep3B cells. The protein expressions of ß-catenin, CD44, c-Myc, CCND1, Sox2, Oct4, Nanog and ABCG2 were detected by Western blot. Interacting proteins were detected by co-immunoprecipitation; and a subcutaneous xenograft model was used to detect the stemness of hepatoma carcinoma cells. The results indicated that aqueous extracts of gecko induced cell growth inhibition in a dose- and time-dependent manner, with the IC50 of (0.750±0.112) g•mL⁻¹ for Huh7 and (0.454±0.039) g•mL⁻¹ for Hep3B, respectively. The number and size of tumor spheres formed by hepatoma carcinoma cells were decreased after treatment by aqueous extracts of gecko(P<0.05); the proportions of cells staining with putative markers for cancer stem cells, such as CD133 and CD44, were decreased(P<0.05). After treatment with aqueous extracts of gecko, the expression levels of ß-catenin, CD44, c-Myc, CCND1, Sox2, Oct4, Nanog and ABCG2 were decreased. Co-immunoprecipitation results showed that the aqueous extracts of gecko could inhibit the interaction between LRP6 and Frizzled6, indicating that the aqueous extracts of gecko could inhibit the proliferation of hepatoma cells, the formation of tumor spheres and the proportion of tumor stem cells, and inhibit the Wnt signaling pathway by targeting LRP6 to prevent the formation of LRP6 and Frizzled6 complexes.

[Clinical application of the modified laryngeal mask airway for endobronchial ultrasound-guided transbronchial needle aspiration biopsy].

OBJECTIVE: To observe the clinical application of the modified laryngeal mask airway for endobronchial ultrasound-guided transbronchial needle aspiration biopsy. METHOD: By the induction of the general anesthesia, 42 patients undergoing endobronchial ultrasound-guided transbronchial needle aspiration biopsy between september 2012 and may 2013 were managed with the modified laryngeal mask airway. The group consisted of 42 male patients aged 56 years to 67 years, with a median age of 61. RESULT: No patient experienced any complications related to the operation, such as buckling, body movement, tracheospasm, pneumothorax and heavy bleeding. Controlled ventilation and bronchial endoscopy were non-interference in each other. And all patients had good ventilation. The satisfaction of thoracic surgery physicians, patients and anesthesiologists were also 100%. CONCLUSION: For patients presenting with EBUS-TBNA under general anesthesia with the modified laryngeal mask airway is a safe and reliable inspection method. This method can be used for routine examination.

Adsorption of carbon dioxide from gas streams via mesoporous spherical-silica particles.

A relatively new mesoporous silica sorbent for environmental protection applications (i.e., mesoporous spherical-silica particles [MSPs]), was modified by N-[3-(trimethoxysilyl)propyl]ethylenediamine (EDA) solution and was tested for its potential in the separation of carbon dioxide (CO2) from flue gas. The CO2 adsorption capacity of MSP and MSP (EDA) increased with temperature from 20 to 60 degrees C but decreased with temperature from 60 to 100 degrees C. The mechanism of CO2 adsorption on both samples is mainly attributed to physical interaction regardless of temperature change. The MSP (EDA) have good adsorption performance as compared with EDA-modified zeolite or granular activated carbon conducted in this study and many types of silica sorbents reported in the literature. The cyclic CO2 adsorption showed that spent MSP (EDA) could be effectively regenerated at 120 degrees C for 25 min and CO2 adsorption capacity of MSP (EDA) was preserved during 16 cycles of adsorption and thermal regeneration. These results suggests that MSP (EDA) are efficient CO2 sorbents and can be stably used in the prolonged cyclic operation.