ABSTRACT
Fabrication of S-scheme heterojunctions with enhanced redox capability offers an effective approach to address environmental remediation. In this study, high-performance Bi2Sn2O7/ß-Bi2O3 S-scheme heterojunction photocatalysts were fabricated via the in situ growth of Bi2Sn2O7 on ß-Bi2O3 microspheres. The optimized Bi2Sn2O7/ß-Bi2O3 (BSO/BO-0.4) degradation efficiency for tetracycline hydrochloride was 95.5%, which was 2.68-fold higher than that of ß-Bi2O3. This improvement originated from higher photoelectron-hole pair separation efficiency, more exposed active sites, excellent redox capacity, and efficient generation of ·O2 - and ·OH. Additionally, Bi2Sn2O7/ß-Bi2O3 exhibited good stability against photocatalytic degradation, and the degradation efficiency remained >89.7% after five cycles. The photocatalytic mechanism of Bi2Sn2O7/ß-Bi2O3 S-scheme heterojunctions was elucidated. In this study, we design and fabricate high-performance heterojunction photocatalysts for environmental remediation using S-scheme photocatalysts.
ABSTRACT
Poly (butylene adipate-co-terephthalate) (PBAT) is a fully biodegradable polymer with toughness and ductility. It is usually compounded with thermoplastic starch (TPS) to balance the cost for manufacturing biodegradable films such as disposable plastic bags. However, blending with TPS reduces valuable tensile strength, which limits the bearing capacity of PBAT film. In this study, microcrystalline cellulose (MCC) was employed as a reinforcement to strengthen the PBAT/TPS biodegradable film. The effect of MCC content on the mechanical, thermal, and morphological properties of the composite film were investigated. The optimal tensile strength and elongation at break reached 5.08 MPa and 230% when 4% MCC was added. The thermal stability and thermal resistance were improved with the addition of MCC; for example, Tmax increased by 1 °C and Tonset increased by 2-8 °C. Moreover, good compatibility among PBAT, TPS, and MCC can be achieved when the MCC content was below 6%. Consequently, the optimal MCC content was found to be 4%. These results could provide experimental data and method support for preparing high-performance PBAT hybrid films.
ABSTRACT
The current research was aimed to study the effects of different land use types (LUT) and soil depth (SD) on soil enzyme activity, metal content, and soil fungi in the karst area. Soil samples with depths of 0-20 cm and 20-40 cm were collected from different land types, including grassland, forest, Zanthoxylum planispinum land, Hylocereus spp. land and Zea mays land. The metal content and enzyme activity of the samples were determined, and the soil fungi were sequenced. The results showed that LUT had a significant effect on the contents of soil K, Mg, Fe, Cu and Cr; LUT and SD significantly affected the activities of invertase, urease, alkaline phosphatase and catalase. In addition, Shannon and Chao1 index of soil fungal community was affected by different land use types and soil depths. Ascomycota, Basidiomycota and Mortierellomycota were the dominant phyla at 0-20 cm and 20-40 cm soil depths in five different land types. Land use led to significant changes in soil fungal structure, while soil depth had no significant effect on soil fungal structure, probably because the small-scale environmental changes in karst areas were not the dominant factor in changing the structure of fungal communities. Additionally, metal element content and enzyme activity were related to different soil fungal communities. In conclusion, soil mineral elements content, enzyme activity, and soil fungal community in the karst area were strongly affected by land use types and soil depths. This study provides a theoretical basis for rational land use and ecological restoration in karst areas.
