ABSTRACT
By analyzing the effects of acid rain and nitrogen deposition on the structure and diversity of soil bacterial communities, the response mechanism of Masson pine forests to environmental stress was investigated, providing a theoretical reference basis for resource management and conservation in Tianmu Mountain National Nature Reserve. Four treatments of the simulated acid rain and nitrogen deposition were set up in 2017 to 2021 in Tianmu Mountain National Nature Reserve (pH value of 5.5 and 0 kg·(hm2·a)-1, CK; pH value of 4.5 and 30 kg·(hm2·a)-1, T1; pH value of 3.5 and 60 kg·(hm2·a)-1, T2; pH value of 2.5 and 120 kg·(hm2·a)-1, T3). The differences in soil bacterial community composition and structure among treatments and their influencing factors were analyzed by collecting soils from four treatments, using the Illumina MiSeq PE300 second-generation high-throughput sequencing platform. The results showed that acid rain and nitrogen deposition significantly reduced soil bacterial α-diversity (P<0.05) in a Masson pine forest. The Masson pine forest soils consisted of 36 phylum groups of mycota, with Acidobacteria, Proteobacteria, Actinobacteria, and Chloroflexi as the main bacterial phyla (relative abundance>1%) in the Masson pine forest soils. Flavobacterium, Nitrospira, Haliangium, Candidatus_Koribacter, Bryobacter, Occallatibacter, Acidipla, Singulisphaera, Pajaroellobacter, and Acidothermus, which showed significant changes in relative abundance under the four treatments, could be used as indicator species for changes in soil bacterial communities under acid rain and nitrogen deposition stress. Soil pH and total nitrogen were influential factors in the diversity of soil bacterial communities. As a result, acid rain and nitrogen deposition increased the potential ecological risk, and the loss of microbial diversity will change the ecosystem function as well as reduce the stability of the ecosystem.
Subject(s)
Acid Rain , Nitrogen , Pinus , Soil Microbiology , Soil , Stress, Physiological , Acid Rain/adverse effects , Acidobacteria , Bacteria/isolation & purification , Ecosystem , Forests , Nitrogen/adverse effects , Nitrogen/analysis , Soil/chemistry , Pinus/physiology , Stress, Physiological/physiology , Microbiota/physiologyABSTRACT
OBJECTIVE: To investigate the changes of regional homogeneity (Reho) values before and after spinal manipulative therapy (SMT) in patients with chronic low back pain (CLBP) through rest blood-oxygen-level-dependent functional magnetic resonance imaging (BOLD fMRI). METHODS: Patients with CLBP (Group 1, n = 20) and healthy control subjects (Group 2, n = 20) were recruited. The fMRI was performed three times in Group 1 before SMT (time point 1, TP1), after the first SMT (time point 2, TP2), after the sixth SMT (time point 3, TP3), and for one time in Group 2, which received no intervention. The clinical scales were finished in Group 1 every time before fMRI was performed. The Reho values were compared among Group 1 at different time points, and between Group 1 and Group 2. The correlation between Reho values with the statistical differences and the clinical scale scores were calculated. RESULTS: The bilateral precuneus and right mid-frontal gyrus in Group 1 had different Reho values compared with Group 2 at TP1. The Reho values were increased in the left precuneus and decreased in the left superior frontal gyrus in Group 1 at TP2 compared with TP1. The Reho values were increased in the left postcentral gyrus and decreased in the left posterior cingulate cortex and the superior frontal gyrus in Group 1 at TP3 compared with TP1. The ReHo values of the left precuneus in Group 1 at TP1 were negatively correlated with the pain degree at TP1 and TP2 (r = -0.549, -0.453; p = 0.012, 0.045). The Reho values of the middle temporal gyrus in Group 1 at TP3 were negatively correlated with the changes of clinical scale scores between TP3 and TP1 (r = 0.454, 0.559; p = 0.044, 0.01). CONCLUSION: Patients with CLBP showed abnormal brain function activity, which was altered after SMT. The Reho values of the left precuneus could predict the immediate analgesic effect of SMT.
ABSTRACT
OBJECTIVE: To establish the fixation model of anterior cervical transpedicular system (ACTPS) after subtotal resection of two segments of lower cervical spine(C3-C7) in order to provide a finite element modeling method for anterior cervical reconstruction. METHODS: The CT data of the cervical segment (C1-T1) of a 30-year-old adult healthy male volunteer was collected. Used Mimics 10.0, Rapidform XOR3, HyperMesh 10.0, CATIA5V19 and ANSYS 14.0 to establish the three-dimensional nonlinear complete model of lower cervical spine(C3-C7) as the intact group. The number of units and nodes of the complete model were recorded. After the effectiveness of the complete model was verified, the C5 and C6 vertebral subtotal resection was performed, and the ACTPS model was established as the ACTPS group. The axial force of 75 N and moment couple of 1N·m was loaded on the upper surface of C3 in intact group and ACTPS group, the range of motion(ROM)and stress distribution in states of flexion extension, lateral flexion, rotation was compared between two groups. RESULTS: There were 85 832 elements and 23 612 nodes in the complete model of lower cervical spine(C3-C7) which was established in this experiment. The stress distribution of ACTPS internal fixation model was relatively uniform. Comparing with the intact group, the overall range of motion in ACTPS group was decreased in flexion extension, lateral flexion and rotation directions, and the corresponding compensation of adjacent C3,4 segment was increased slightly. CONCLUSION: The stress distribution of ACTPS fixation system is uniform, there is no stress concentration area at the joint of screw and titanium plate, and the fracture risk of internal fixation is low. It is suitable for stability reconstruction after anterior decompression of two or more cervical segments.
Subject(s)
Cervical Vertebrae , Spinal Fusion , Adult , Biomechanical Phenomena , Bone Screws , Cervical Vertebrae/surgery , Finite Element Analysis , Humans , Male , Range of Motion, ArticularABSTRACT
Emerging evidence indicates that circRNAs are broadly expressed in osteosarcoma (OS) cells and play a crucial role in OS progression. Recently, cancer-specific circRNA circPRKAR1B has been identified by high-throughput sequencing and is recorded in publicly available databases. Nevertheless, the detailed functions and underlying mechanisms of circPRKAR1B in OS remains poorly understood. By functional experiments, we found that circPRKAR1B enhanced OS cell proliferation, migration, and promotes OS epithelial-mesenchymal transition (EMT). Mechanistic investigations suggested that circPRKAR1B promotes OS progression through sponging miR-361-3p to modulate the expression of FZD4. Subsequently, we identified that EIF4A3 promoted cirPRKAR1B formation through binding to the downstream target of circPRKAR1B on PRKAR1B mRNA. Further rescue study revealed that overexpression of the Wnt signalling could impair the onco-suppressor activities of the silencing of circPRKAR1B. Interestingly, further experiments indicated that circPRKAR1B is involved in the sensitivity of chemoresistance in OS. On the whole, our results demonstrated that circPRKAR1B exerted oncogenic roles in OS and suggested the circPRKAR1B/miR-361-3p/FZD4 axis plays an important role in OS progression and might be a potential therapeutic target.
Subject(s)
Bone Neoplasms/metabolism , Carcinogenesis/metabolism , Cyclic AMP-Dependent Protein Kinase RIbeta Subunit/metabolism , DEAD-box RNA Helicases/metabolism , Eukaryotic Initiation Factor-4A/metabolism , Frizzled Receptors/metabolism , MicroRNAs/metabolism , Osteosarcoma/metabolism , RNA, Circular/metabolism , Signal Transduction/genetics , Animals , Bone Neoplasms/genetics , Bone Neoplasms/pathology , Carcinogenesis/genetics , Cell Line, Tumor , Cell Movement/genetics , Cell Proliferation/genetics , Cyclic AMP-Dependent Protein Kinase RIbeta Subunit/genetics , Epithelial-Mesenchymal Transition/genetics , Gene Silencing , Humans , Male , Mice , Mice, Nude , MicroRNAs/genetics , Osteosarcoma/genetics , Osteosarcoma/pathology , RNA, Circular/genetics , Transfection , Tumor Burden/genetics , Xenograft Model Antitumor AssaysABSTRACT
OBJECTIVE: To compare accuracy of anterior cervical pedicle screws between assist of rapid prototyping 3D guide plate and free-hand insertion, and evaluate the safety of two methods. METHODS: Eight adult cervical cadaver specimens after formaldehyde immersion, including 4 males and 4 females, aged 32 to 65(40.3±5.6) years old. After X-ray examination to exclude bone damage and deformity, 4 of them (3D guide plate group) randomly selected were for CT scan to obtain DICOM format data, and the data was imported into Mimics software for model, designed the ideal entry point and nail path for anterior cervicaltranspedicular screw (ATPS). After obtaining the personalized guide plate of the nail channel, it was exported as STL data, and the individual guide plate was printed by rapid prototyping and 3D printing technology. In turn, with the assistance of 3D guide plates, one-to-one personalized ATPS screws were placed on the four lower cervical cadaver specimens. Another 4 (free-hand group) lower cervical cadaver specimens were implanted with ATPS screws using free-hand technique. All specimens were performed CT thin-layer scanning and three-dimensional reconstruction after operation. The Tomasino method was used to evaluate the safety of the screws on the CT cross-sectional and sagittal images, to determine whether there was a cortical puncture of the lower and inner edges of the pedicle. According to the CT rating results, gradeâ andâ ¡were safe, and grade â ¢- â ¤ were dangerous.And the accuracy of screws was recorded and analyzed between two groups. RESULTS: Two screws were inserted in each segment from C3 to C7 in 8 adult cadavers. A total of 80 screws were inserted, 40 in the 3D guide plate group, and 40 in the free-hand group. The Tomasino screw rating method was used to evaluate the safety of screw, 21 screws were gradeâ , 14 screws were gradeâ ¡, 3 screws were grade â ¢, 1 screw was grade â £, 2 screws were grade â ¤ in 3D guide plate group, while 14 screws were gradeâ , 8 screws were gradeâ ¡, 8 screws were grade â ¢, 6 screws were grade â £, 2 screws were grade â ¤ in free-hand group. The safety rate of 3D guide plate group was 87.5%, and 55.0% of the free hand group (χ2=8.7, P=0.003). CONCLUSION: The 3D printing rapid prototyping guide plate assisted insertion of the anterior cervical pedicle screw can significantly improve the accuracy and safety, and provide a theoretical basis for further clinical application.
Subject(s)
Cervical Vertebrae , Pedicle Screws , Adult , Aged , Bone Plates , Cervical Vertebrae/diagnostic imaging , Cervical Vertebrae/surgery , Cross-Sectional Studies , Female , Humans , Male , Middle Aged , Printing, Three-DimensionalABSTRACT
This study established gender-specific reference values in mainland Chinese (MC) and is important for quantitative morphometry for diagnosis and epidemiological study of osteoporotic vertebral compressive fracture. Comparisons of reference values among different racial populations are then performed to demonstrate the MC-specific characteristic. PURPOSE: Osteoporotic vertebral compressive fracture (OVCF) is a common complication of osteoporosis in the elder population. Clinical diagnosis and epidemiological study of OVCF often employ quantitative morphometry, which relies heavily on the comparison of patients' vertebral parameters to existing reference values derived from the normal population. Thus, reference values are crucial in clinical diagnosis. To our knowledge, this is the first study to establish reference values of the mainland Chinese (MC) for quantitative morphometry. METHODS: Vertebral heights including anterior (Ha), middle (Hm), posterior (Hp) heights, and predicted posterior height (pp) from T4 to L5 were obtained; and ratios of Ha/Hp, Hm/Hp and Hp/pp. were calculated from 585 MC (both female and male) for establishing reference values and subsequent comparisons with other studies. RESULTS: Vertebral heights increased progressively from T4 to L3 but then decreased in L4 and L5. Both genders showed similar ratios of vertebral dimensions, but male vertebrae were statistically larger than those of female (P < 0.01). Vertebral size of MC population was smaller than that of US and UK population, but was surprisingly larger than that of Hong Kong Chinese, although these two are commonly considered as one race. Data from different racial populations showed similar dimensional ratios in all vertebrae. CONCLUSIONS: We established gender-specific reference values for MC. Our results also indicated the necessity of establishing reference values that are not only race- and gender-specific, but also population- or region-specific for accurate quantitative morphometric assessment of OVCF.
Subject(s)
Osteoporotic Fractures/ethnology , Spinal Fractures/ethnology , Spine , Aged , Asian People , China/epidemiology , Demography , Female , Humans , Male , Organ Size , Racial Groups , Reference Values , Sex Factors , Spine/anatomy & histology , Spine/pathologyABSTRACT
Long-time glucocorticoids (GCs) usage causes osteoporosis. In the present study, we explored the potential role of hydrogen sulfide (H2S) against dexamethasone (Dex)-induced osteoblast cell damage, and focused on the underlying mechanisms. We showed that two H2S-producing enzymes, cystathionine ß-synthase (CBS) and cystathionine γ-lyase (CSE), were significantly downregulated in human osteonecrosis tissues as well as in Dex-treated osteoblastic MC3T3-E1 cells. H2S donor NaHS as well as the CBS activator S-adenosyl-l-methionine (SAM) inhibited Dex-induced viability reduction, death and apoptosis in MC3T3-E1 cells. NaHS activated adenosine monophosphate (AMP)-activated protein kinase (AMPK) signaling, which participated its cyto-protective activity. AMPK inhibition by its inhibitor (compound C) or reduction by targeted-shRNA suppressed its pro-survival activity against Dex in MC3T3-E1 cells. Further, we found that NaHS inhibited Dex-mediated reactive oxygen species (ROS) production and ATP depletion. Such effects by NaHS were again inhibited by compound C and AMPKα1-shRNA. In summary, we show that H2S inhibits Dex-induced osteoblast damage through activation of AMPK signaling. H2S signaling might be further investigated as a novel target for anti-osteoporosis treatment.
Subject(s)
AMP-Activated Protein Kinases/metabolism , Dexamethasone/antagonists & inhibitors , Dexamethasone/toxicity , Hydrogen Sulfide/pharmacology , Osteoblasts/drug effects , 3T3 Cells , AMP-Activated Protein Kinases/antagonists & inhibitors , AMP-Activated Protein Kinases/genetics , Adenosine Triphosphate/metabolism , Animals , Apoptosis/drug effects , Cell Survival/drug effects , Cystathionine beta-Synthase/metabolism , Cystathionine gamma-Lyase/metabolism , Cytoprotection/drug effects , Enzyme Activation , Gene Knockdown Techniques , Humans , Mice , Osteoblasts/metabolism , Osteoblasts/pathology , Osteonecrosis/metabolism , Osteonecrosis/pathology , Osteonecrosis/prevention & control , RNA, Small Interfering/genetics , Reactive Oxygen Species/metabolismABSTRACT
The success of research on matrix completion is evident in a variety of real-world applications. Tensor completion, which is a high-order extension of matrix completion, has also generated a great deal of research interest in recent years. Given a tensor with incomplete entries, existing methods use either factorization or completion schemes to recover the missing parts. However, as the number of missing entries increases, factorization schemes may overfit the model because of incorrectly predefined ranks, while completion schemes may fail to interpret the model factors. In this paper, we introduce a novel concept: complete the missing entries and simultaneously capture the underlying model structure. To this end, we propose a method called simultaneous tensor decomposition and completion (STDC) that combines a rank minimization technique with Tucker model decomposition. Moreover, as the model structure is implicitly included in the Tucker model, we use factor priors, which are usually known a priori in real-world tensor objects, to characterize the underlying joint-manifold drawn from the model factors. By exploiting this auxiliary information, our method leverages two classic schemes and accurately estimates the model factors and missing entries. We conducted experiments to empirically verify the convergence of our algorithm on synthetic data and evaluate its effectiveness on various kinds of real-world data. The results demonstrate the efficacy of the proposed method and its potential usage in tensor-based applications. It also outperforms state-of-the-art methods on multilinear model analysis and visual data completion tasks.
ABSTRACT
Given a set of images, finding a compact and discriminative representation is still a big challenge especially when multiple latent factors are hidden in the way of data generation. To represent multifactor images, although multilinear models are widely used to parameterize the data, most methods are based on high-order singular value decomposition (HOSVD), which preserves global statistics but interprets local variations inadequately. To this end, we propose a novel method, called multilinear graph embedding (MGE), as well as its kernelization MKGE to leverage the manifold learning techniques into multilinear models. Our method theoretically links the linear, nonlinear, and multilinear dimensionality reduction. We also show that the supervised MGE encodes informative image priors for image regularization, provided that an image is represented as a high-order tensor. From our experiments on face and gait recognition, the superior performance demonstrates that MGE better represents multifactor images than classic methods, including HOSVD and its variants. In addition, the significant improvement in image (or tensor) completion validates the potential of MGE for image regularization.
ABSTRACT
Two new Lycopodium alkaloids, N-oxidehuperzine E (1) and N-oxidehuperzine F (2), along with two known alkaloids, huperzines E (3) and F (4), were isolated from Huperzia serrata (Thunb.) Trev. Their structures were elucidated by spectroscopic and chemical transformations.
Subject(s)
Alkaloids/chemistry , Huperzia/chemistry , Plant Extracts/chemistry , Molecular Structure , Nuclear Magnetic Resonance, BiomolecularABSTRACT
Callianthones A ( 1) and B ( 2), a pair of new isomeric alpha-tetralones, together with a known alpha-tetralone ( 3) and four known flavonoids ( 4 - 7) were isolated from the 50 % EtOH extract of Pyrola calliantha. The structures and absolute configurations of the two new isomers were established to be (2 S,4 R) - and (2 S,4 S)-2,4-dihydroxy-2,7-dimethyl-3,4-dihydronaphthalen-1(2 H)-one ( 1 and 2, respectively) on the basis of spectral analysis, including 2 D NMR, model studies, and CD spectra.