Site and severity of facial asymmetry after bimaxillary surgery for class III deformity: a case-control study.

OBJECTIVES: The study aimed (1) to evaluate the site and severity of facial asymmetry in Class III patients before and after bimaxillary surgery, and (2) to identify the influence of initial severity and positional jaw asymmetry on residual facial asymmetry. MATERIALS AND METHODS: Preoperative and postoperative cone-beam computed tomography of 65 patients with Class III facial asymmetry who underwent bimaxillary surgery were evaluated. Five midline and 14 paramedian facial soft tissue landmarks were identified to assess facial asymmetry. The outcomes were compared to a control group consisting of 30 age- and gender-matched Class I subjects. The postoperative positional jaw asymmetry (i.e., shift, roll, yaw) of each osteotomy segment (maxilla, mandible, chin, ramus) was also measured. RESULTS: Before surgery, the asymmetry was more severe at the chin, middle and lower contour. Bimaxillary surgery effectively corrected facial asymmetry, particularly in achieving normalization of chin deviation. However, significant asymmetry persisted postoperatively in the middle and lower contour (p < 0.001 and p < 0.01, respectively), which was affected by the positional ramus asymmetry in the roll and shift. CONCLUSIONS: Deviation of the chin, middle and lower contour contributed significantly to overall facial asymmetry in Class III asymmetry. Despite normalization of the chin deviation after bimaxillary surgery, asymmetry persisted at the middle and lower contour, primarily as the result of insufficient correction of the positional ramus asymmetry. CLINICAL RELEVANCE: Understanding the residual asymmetry after bimaxillary surgery is important for minimizing deviation and optimizing the surgical planning for its correction.

Three-dimensional evaluation of skeletal stability after surgery-first bimaxillary surgery for class III asymmetry in 70 consecutive patients.

Background/purpose: Skeletal stability after orthognathic surgery is essential for positive treatment outcome. This study evaluated the stability of osteotomy segments after surgery-first bimaxillary surgery for class III asymmetry. Materials and methods: Seventy adults with class III asymmetry consecutively corrected through surgery-first Le Fort I and bilateral sagittal split osteotomies were investigated. Cone-beam computed tomography before treatment (T0), 1-week after surgery (T1), and after all treatment (T2, ≥1-year after surgery) was used to assess surgical movement (T0 to T1) and skeletal stability (T1 to T2) regarding the translation and rotation of the maxillary, mandibular distal, and proximal segments. Results: At T1, the maxillary segment had moved forward and upward, turned to the deviated side, and rotated downward (all P < 0.01). The distal segment of mandible had moved forward and upward and rotated upward (all P < 0.001). The deviated proximal segment had moved upward, tilted to the opposite side, and rotated upward (all P < 0.001). The opposite proximal segment had moved upward and tilted to the deviated side (both P < 0.01). At T2, significant relapse occurred in the mandible. The distal segment moved forward and upward and rotated upward (all P < 0.001). The deviated proximal segment moved upward, tilted to the opposite side, and rotated upward (all P < 0.001). The opposite proximal segment moved upward and tilted to the deviated side (both P < 0.01). Conclusion: Clinically significant relapse of class III asymmetry was discovered on the mandibular distal and opposite proximal segments.

Three-dimensional positioning of the maxilla using novel intermediate splints in maxilla-first orthognathic surgery for correction of skeletal class III deformity.

OBJECTIVES: Successful orthognathic surgery requires accurate transfer of the intraoperative surgical plan. This study aimed to (1) evaluate the surgical error of a novel intermediate splint in positioning the maxilla during maxilla-first orthognathic surgery and (2) determine factors influencing surgical error. MATERIALS AND METHODS: This prospective study examined 83 patients who consecutively underwent Le Fort I osteotomy for correction of skeletal class III deformity using a novel intermediate splint and a bilateral sagittal split osteotomy. Surgical error was the outcome variable, measured as the difference in postoperative translational and rotational maxillary position from the virtual plan. Measures included asymmetry, need and amount for mandibular opening during fabrication of intermediate splints, and planned and achieved skeletal movement. RESULTS: Mean errors in translation for vertical, sagittal, and transversal dimensions were 1.0 ± 0.7 mm, 1.0 ± 0.6 mm, and 0.7 ± 0.6 mm, respectively; degrees in rotation for yaw, roll, and pitch were 0.8 ± 0.6, 0.6 ± 0.4, and 1.6 ± 1.1, respectively. The transverse error was smaller than sagittal and vertical errors; error for pitch was larger than roll and yaw (both p < 0.001). Error for sagittal, transverse, and roll positioning was affected by the achieved skeletal movement (roll, p < 0.05; pitch and yaw, p < 0.001). Surgical error of pitch positioning was affected by planned and achieved skeletal movement (both p < 0.001). CONCLUSIONS: Using the novel intermediate splint when performing Le Fort I osteotomy allowed for accurate positioning of the maxilla. CLINICAL RELEVANCE: The novel intermediate splint for maxillary positioning can be reliably used in clinical routines.

Three-dimensional facial soft-tissue changes after surgical orthodontics in different vertical facial types of skeletal Class III malocclusion: A retrospective study.

The study compared the soft-tissue response to hard-tissue movement among different Class III vertical facial types after orthognathic surgery (OGS). The study included 90 consecutive adult patients with skeletal Class III malocclusion who underwent two-jaw OGS. Patients were divided into three groups (high, medium, and low angle) based on the presurgical Frankfort-mandibular plane angle. Cone-beam computerized tomographs were taken before surgery and after debonding. Soft- and hard-tissue linear and angular measurements were performed using three-dimensional reconstruction images. One-way analysis of variance was used for intergroup comparisons. Soft tissue tended to respond more to hard-tissue movement in the lower lip area in patients with low angle (mean = 0.089, SD = 0.047, p = 0.023), whereas no significant difference was observed for other sites. Consistently, L1/Li thickness increased most significantly in the high-angle group (mean = 1.98, SD = 2.14, p = 0.0001), and B/Si thickness decreased most significantly after surgery (mean = 2.16, SD = 2.68, p = 0.016). The findings suggest that the high-angle group had a higher chance of undergoing genioplasty to enhance chin contour. Different OGS plans should be considered for different Class III vertical facial types.

Chang Gung Forum: An Exemplary Strategy for Implementing a Multidisciplinary Network of Experts in Craniofacial Anomalies.

INTRODUCTION: The Chang Gung Forum has been dedicated to the care of craniofacial anomalies since 2000. This annual continuing medical education program focuses on orofacial cleft and surgery-first orthognathic surgery by providing up-to-date information and management guidelines. This study explored how the Chang Gung Forum has influenced medical perspectives, decisions, and practices in a multidisciplinary craniofacial team. METHODS: Between 2000 and 2022, 20 Chang Gung Forums have been held. A questionnaire was distributed among 170 attendees who had participated in the forum more than once. The questionnaire collected information on the participants' experiences and levels of satisfaction with the educational program and whether or how it had influenced their clinical practice. RESULTS: Valid responses from 86 attendees (response rate, 50.6%) who had participated more than once were collected and analyzed. The overall satisfaction rate of the Chang Gung Forum based on the respondents' most recent visits was 4.28 ± 0.63 out of 5. Of the respondents, 90.9% acknowledged changes in their clinical practice, with modifications in surgery plans and decisions being the most notable (48.5%). In addition, comprehension increased throughout years of attending the annual forum (P < 0.001). CONCLUSION: The Chang Gung Forum has contributed markedly to the community of congenital craniofacial anomalies. The program will continue providing updated information and influencing the clinical decision-making of health care professionals.

Surgery-First Orthognathic Approach for Correction of Dentofacial Deformity in Unilateral Cleft Lip and Palate.

BACKGROUND: Although several studies have reported the advantages of the surgery-first approach for orthognathic correction of class III deformity, there is no report of the success of this approach for patients with cleft lip and palate. Therefore, the purpose of this study was to evaluate the stability and outcome of bimaxillary surgery for cleft-related dentofacial deformity using a surgery-first approach. METHODS: Forty-one patients with unilateral cleft lip and palate who consecutively underwent Le Fort I and bilateral sagittal split osteotomies for skeletal class III deformity were included. Cone-beam computed tomographic scans before surgery, 1 week after surgery, and after orthodontic treatment were used to measure the surgical and postsurgical changes in jaw position by landmarks, and outcomes of jaw protrusion and relation, incisor angle and occlusion, and menton deviation after treatment. Self-report questionnaires regarding satisfaction with overall appearance of the face and seven facial regions were administered after treatment. RESULTS: A clinically insignificant relapse was found in the maxilla (<1 mm) and mandible (<2 mm). There was a significant improvement in the jaw protrusion and relation, incisor angle and occlusion, and menton deviation. Responses from the self-report questionnaires completed after treatment indicated that patient satisfaction was high. CONCLUSION: These findings demonstrate surgical-orthodontic treatment with a surgery-first approach can successfully improve cleft-related dentofacial deformity in patients with unilateral cleft lip and palate. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Surgical occlusion setup and skeletal stability of correcting cleft-associated class III deformity using surgery-first bimaxillary surgery.

BACKGROUND: This study aimed to assess the three-dimensional (3D) quantitative characteristics of the surgical occlusion setup in surgery-first cleft orthognathic surgery, and to evaluate its influence on post-surgical skeletal stability. METHODS: This prospective study was comprised of 35 patients with unilateral cleft lip and palate and class III deformity who consecutively underwent two-jaw surgery with surgery-first approach. Digitized dental models were analyzed to quantify the 3D characteristics of the final surgical occlusion setup. Cone-beam computed tomography was used to measure the 3D surgical skeletal movement and post-surgical skeletal stability. The correlation between skeletal stability and surgical occlusal contact or surgical skeletal movement was also evaluated. RESULTS: The surgical occlusion setup had a large incisor overjet and positive overbite, and buccal cross bite and open bite on second molars. Occlusal contact on three segments was present in 51.4% of the patients, and the average number for tooth contact was 4.3 teeth. No correlation was found between maxillary or mandibular stability and surgical occlusal contact. However, a significant correlation was found between maxillary and mandibular stability and the surgical skeletal movement. CONCLUSIONS: The surgical occlusion for correction of cleft-associated class III deformity using the surgery-first approach was characterized with large overjet and positive overbite, and posterior cross bite and open bite. On average, there was occlusal contact on four to five teeth; half of surgical occlusion setups had contact on three segments. The post-surgical skeletal stability was not related to the surgical occlusal contact but to the surgical skeletal movement.

Outcomes of alveolar cleft repair in complete cleft lip and palate after tertiary gingivoperiosteoplasty and segmental Le Fort I osteotomy.

OBJECTIVES: Gingivoperiosteoplasty is often used for reconstruction of alveolar defects in infants with cleft lip and palate. This study aimed to examine outcomes of tertiary gingivoperiosteoplasty, which has not previously been investigated. MATERIALS AND METHODS: This prospective study included 11 adults with complete cleft lip and palate (n = 12 sites) who consecutively underwent segmental Le Fort I osteotomy and concomitant gingivoperiosteoplasty for correction of skeletal class III deformity, nasoalveolar fistula and alveolar cleft. Outcomes included clinical and radiographic evaluations of gingivoperiosteoplasty at the time of osteotomy (presence of nasoalveolar fistula, residual cleft defect and unsupported root ratio of cleft-adjacent teeth), and determination of influencing factors for the clinical success of alveolar cleft repair. Study variables included age, gender, pre-surgical orthodontic treatment and alveolar cleft width of cleft-adjacent canine and angulation between cleft-adjacent teeth before surgery and 1-week postsurgery. RESULTS: Posttreatment, no nasoalveolar fistula remained. The residual cleft defect decreased significantly (p < 0.01). The unsupported root ratio of cleft-adjacent teeth did not differ (p > 0.05); eight cleft sites reached Bergland I or II (67% success). One-week postsurgery, the minimal alveolar cleft width of cleft-adjacent canine was significantly less in the success group compared with the failed group (p = 0.01). CONCLUSIONS: Tertiary gingivoperiosteoplasty and segmental Le Fort I osteotomy decreased nasoalveolar fistulas and induced alveolar bone formation. The minimal alveolar cleft width immediately after surgery was the major influencing factor of clinical success. CLINICAL RELEVANCE: Segmental Le Fort I osteotomy with simultaneous gingivoperiosteoplasty efficaciously repairs adult alveolar clefts.

Surgical Stability After Proximal Segment Angle Alteration in Patients With Class III Facial Asymmetry.

PURPOSE: Patients with facial asymmetry often seek improved symmetry in lower face contour resulting in transverse movement of the proximal segments. The study aimed to investigate the association between transverse change in the proximal segments and postoperative relapse after the surgical correction of skeletal Class III facial asymmetry. METHODS: This retrospective cohort study includes consecutive patients with skeletal Class III asymmetry who underwent 2-jaw orthognathic surgery. The primary predictor variable was ramus plane angle (RPA). The patients were grouped as small (S group, <4°) and large (L group, ≥4°) changes in RPA. The primary outcome was the positional change of B point, menton, and the intergonial width. Cone-beam computed tomography images were obtained before surgery (T0), 1 week after surgery (T1), and debond (T2). Intergroup comparison was conducted with independent t test. Correlations between the variables were estimated by Pearson correlation. RESULTS: The study sample was composed of 60 subjects with 30 subjects in each study group. In the S group, the mean surgical changes of RPA were inward rotated 0.91° bilaterally. In the L group, the mean surgical changes of RPA were inward rotated 4.80° and 0.32° on the deviated and non-deviated side. After surgery, further minor inward adaptation of both sides was noted (<1 mm), and intergonial distance reduced with these changes in the proximal segments. By comparing the postsurgical stability between S and L group, the overall sagittal and vertical stability had no significant difference between 2 groups. However, the postsurgical transverse menton relapse (ΔMe in T2-T1) was significantly larger in L group (0.81 ± 1.40 mm) than S group (0.04 ± 1.32 mm) by 0.77 mm (P = .014). CONCLUSION: Greater surgical changes in the proximal segments had minor clinical effect on transverse stability. Minor transverse overcorrection of 1 mm is recommended in cases with severe facial symmetry with extensive changes in the proximal segments.

Comparison of regional soft tissue changes after bimaxillary rotational surgery between class III deformity with overbite and open bite: A 3D imaging analysis.

BACKGROUND: This prospective study aimed to compare regional soft tissue changes between patients with class III overbite and open bite deformities treated with bimaxillary surgery involving clockwise and counter-clockwise mandibular setback, respectively. MATERIAL AND METHODS: Class III deformity adults receiving Le Fort I and bilateral sagittal split osteotomies were grouped according to the incisal occlusion: overbite (n = 30) and open bite (n = 30). Combined cone-beam CT scans and 3D facial photographs preoperative and at least 1-year postoperative were taken to assess the soft tissue changes. RESULTS: Postoperative changes for the overbite and open bite groups included anterior repositioning of nose (-0.8 ± 1.2 mm and -1.1 ± 1.1 mm, respectively) and cheek (-1.9 ± 1.3 mm and -1.7 ± 2.6 mm, respectively), posterior repositioning of chin (5.2 ± 4.0 mm and 4.9 ± 3.2 mm, respectively), and medial (-1.7 ± 2.0 mm and -1.9 ± 2.1 mm, respectively) and posterior (2.7 ± 1.4 mm and 2.8 ± 2.3 mm, respectively) repositioning of bilateral angles. Posterior (1.2 ± 2.0 mm and 5.1 ± 3.3 mm) and inferior (-1.4 ± 2.2 mm and -2.4 ± 2.7 mm) repositioning of upper lip and lower lip occurred in overbite group. Inferior (-2.3 ± 2.4 mm) and superior (3.7 ± 3.4 mm) repositioning of chin occurred in the overbite and open bite groups, respectively. CONCLUSIONS: Treatment of class III overbite and open bite deformities with bimaxillary rotational surgery resulted in comparable regional soft tissue changes, except for upper lip, lower lip and chin.

The Number of Surgical Interventions and Specialists Involved in the Management of Patients with Neurofibromatosis Type I: A 25-Year Analysis.

Objective: In this study, we aim to present a single institution's 25-year experience of employing a comprehensive multidisciplinary team-based surgical approach for treating patients with NF-1. Summary Background Data: All patients (n = 106) with a confirmed diagnosis of NF-1 who were treated using a multidisciplinary surgical treatment algorithm at Chang Gung Memorial Hospital between 1994 and 2019 were retrospectively enrolled. Patients were categorized into groups according to the anatomy involved (craniofacial and noncraniofacial groups) and the type of clinical presentation (plexiform and cutaneous neurofibromas groups) for comparative analysis. Methods: The number of surgical interventions and number of specialists involved in surgical care were assessed. Results: Most of the patients exhibited craniofacial involvement (69.8%) and a plexiform type of NF-1 (58.5%), as confirmed through histology. A total of 332 surgical interventions (3.1 ± 3.1 procedures per patient) were performed. The number of specialists involved in surgical care of the included patients was 11 (1.6 ± 0.8 specialists per patient). Most of the patients (62.3%) underwent two or more surgical interventions, and 40.6% of the patients received treatment from two or more specialists. No significant differences were observed between the craniofacial and noncraniofacial groups in terms of the average number of surgical interventions (3.3 ± 3.2 vs. 2.7 ± 2.7, respectively) and number of specialists involved (1.7 ± 0.9 vs. 1.4 ± 0.6). Patients with plexiform craniofacial involvement underwent a significantly higher average number of surgical interventions (4.3 ± 3.6 vs. 1.6 ± 1.1; p < 0.001) and received treatment by more specialists (1.9 ± 0.9 vs. 1.2 ± 0.5; p < 0.001) compared with those having cutaneous craniofacial involvement. Conclusions: In light of the potential benefits of employing the multidisciplinary team-based surgical approach demonstrated in this study, such an approach should be adopted to provide comprehensive individualized care to patients with NF-1.

Three-dimensional ultrasound for carotid vessel wall volume measurement.

OBJECTIVES: The intima-media thickness (IMT) of the carotid artery can now be detected on a three-dimensional (3D) plane. The 3D vessel wall volume (VWV) more accurately represents vascular conditions. Through 3D ultrasound, we established a standardized method for carotid VWV measurement. MATERIALS AND METHODS: A total of thirty patients without stroke or cardiovascular disease who received carotid duplex sonography were retrospectively reviewed. Gray-scale 3D images from the distal common carotid artery (CCA) to internal carotid artery on both sides were acquired using a single-sweep 3D transducer and analyzed offline by using the vascular plaque quantification function of the Philips QLAB software. Then, the 3D IMT(QLAB intima-media thickness [QIMT]), total plaque volume (TPV), and VWV were measured by a neurologist and a technician, and the interobserver variability was assessed. RESULTS: The mean two-dimensional (2D) carotid IMT was 0.65 ± 0.12 mm. The mean QIMT, TPV, and VWV measured by observer 1 were 0.68 ± 0.18 mm, 26 ± 12 mm3, and 94 ± 10 mm3, respectively. The Bland-Altman plot of the mean differences between the QIMT, TPV, and VWV values measured by observers 1 and 2 showed that those of observer 2 were within two standard deviations of those of observer 1. Intraclass correlation coefficients (ICCs) indicated strong correlations in QIMT (ICC = 0.76), TPV (ICC = 0.85), and VWV (ICC = 0.90; P < 0.001) between observers 1 and 2. Both 2D IMT and 3D QIMT exhibited a positive linear correlation with age. CONCLUSION: This study established a standardized VWV measurement through 3D ultrasound. Reasonable interobserver differences were obtained within a 95% limit of agreement and high reliability (ICC = 0.90). The VWV 1 cm from the CCA bifurcation was quantified with a mean value of 94.2 mm3. Further studies on the 3D ultrasound quantification of carotid arteries are warranted.

Skeletal stability after bimaxillary surgery with surgery-first approach for class III asymmetry is not related to virtual surgical occlusal contact.

OBJECTIVES: Surgery-first orthognathic surgery is rarely used in class III asymmetry due to concerns of reduced skeletal stability from unstable surgical occlusion. This study aimed to evaluate if skeletal stability after surgery-first orthognathic surgery is related to virtual surgical occlusal contact or surgical change. MATERIALS AND METHODS: We studied 58 adults with class III asymmetry, consecutively corrected by Le Fort I osteotomy and bilateral sagittal split osteotomy using a surgery-first approach. Dental casts were manually set to measure virtual surgical occlusal contact including contact distribution, contact number, and contact area. Cone-beam computed tomography taken before treatment, 1-week post-surgery, and after treatment was used to measure surgical change and post-surgical stability of the maxilla and mandible in translation (left/right, posterior/anterior, superior/inferior) and rotation (pitch, roll, yaw). The relationship between skeletal stability and surgical occlusal contact or surgical change was evaluated with correlation analysis. RESULTS: Significant instability was found in the mandible but not in the maxilla. No correlation was found between the maxillary or mandibular stability and surgical occlusal contact (all p > 0.01). However, a significant correlation was found between the maxillary (roll and yaw) or mandibular (shift, roll and pitch) stability and its surgical change (all p < 0.001). CONCLUSIONS: In correction of class III asymmetry with surgery-first bimaxillary surgery, the skeletal stability is not related to the virtual surgical occlusal contact, but surgical skeletal change. CLINICAL RELEVANCE: Planned over-correction is a reasonable option for correction of severe shift or roll mandibular asymmetry in bimaxillary surgery for class III deformity.

Comparison of stability and outcomes of surgery-first bimaxillary surgery for skeletal class III deformity between unilateral and bilateral cleft lip and palate.

OBJECTIVES: Some adults with cleft lip and palate (CLP) require orthognathic surgery due to skeletal deformity. This prospective study aimed to (1) compare skeletal stability following bimaxillary surgery for correction of class III deformity between patients with unilateral CLP (UCLP) and bilateral CLP (BCLP), and (2) identify risk factors of stability. MATERIALS AND METHODS: Adults with CLP and skeletal class III deformities who underwent surgery-first bimaxillary surgery were divided into two groups according to cleft type: UCLP (n = 30) and BCLP (n = 30). Skeletal stability was assessed with measures from cone beam computed tomography images of the maxilla and mandible taken before treatment, 1-week and ≥ 1 year postsurgery for translation (left/right, posterior/anterior, superior/inferior) and rotation (yaw, roll, pitch); multiple regression analysis examined risk factors. RESULTS: At follow-up, the maxilla moved upwards in both groups, and backwards in the UCLP group. The mandible moved forward and upward, shifted to the cleft (deviated) side, and rotated upward in both groups. The amount of surgical advancement was a risk factor for sagittal stability in the maxilla (ß = -0.14, p < 0.05). The mandible had three risk factors for sagittal stability: age (ß = -0.23, p < 0.05), surgical team (ß = -1.83, p < 0.05), and amount of surgical setback (ß = -0.32, p = 0.001). CONCLUSIONS: Two years after bimaxillary surgery, patients with UCLP had a higher sagittal relapse of the maxilla compared with patients with BCLP, which was due to a greater surgical advancement in the patients with UCLP. CLINICAL RELEVANCE: Surgery-first bimaxillary surgery results in favorable treatment outcomes for correction of cleft-related class III deformity. Severity of jaw discrepancy and surgeons should be considered in the surgical design of overcorrection.

Skeletal and upper airway stability following modified maxillomandibular advancement for treatment of obstructive sleep apnea in skeletal class I or II deformity.

OBJECTIVES: Maxillomandibular advancement (MMA) is an effective short-term treatment for obstructive sleep apnea (OSA). This study aimed to evaluate the long-term stability of the facial skeleton, upper airway, and its surrounding structures, as well as improvement in OSA following MMA. MATERIALS AND METHODS: Thirty-one adults with moderate-to-severe OSA underwent surgery-first modified MMA as primary surgery. Polysomnography and cone-beam computed tomography were obtained pre-surgery, early post-surgery, and at follow-up (i.e., ≥ 2 years post-surgery). Image analysis software assessed the facial skeleton, upper airway, and its surrounding structures. RESULTS: Early post-surgery, apnea-hypopnea index (AHI) had decreased significantly (p < 0.001) and the minimum oxygen saturation (MSAT) increased (p = 0.001), indicating significant improvement in OSA. At follow-up, the AHI and MSAT remained stable. However, the anterior maxilla, soft palate, and tongue moved backward while the hyoid moved downward. There was also a significant decrease in the minimal cross-sectional area of the oropharynx. The reduction in AHI was significantly related to the anterior movement of the anterior maxilla and tongue, inferior movement of the posterior maxilla, and superior movement of the soft palate tip. CONCLUSIONS: The improvement of OSA after modified MMA remained stable for at least 2 years following treatment, despite the relapse of the facial skeleton, upper airway, and its surrounding structures. The reduction of AHI was not related to changes in the caliber of the upper airway but to the movement of the maxilla, soft palate, and tongue. Clinical relevance Modified MMA is clinically effective for long-term treatment of patients with moderate-to-severe OSA.

Type of mandibular asymmetry affects changes and outcomes of bimaxillary surgery for class III asymmetry.

OBJECTIVES: Various methods have been used to classify class III asymmetry. There is little information on the use of an asymmetry index to examine soft tissue changes and outcomes for patients with class III asymmetry. This study aimed to (1) evaluate soft tissue changes and outcomes for three types of mandibular asymmetry and (2) determine if measures are associated with type of asymmetry. MATERIALS AND METHODS: Adults who consecutively underwent bimaxillary surgery using surgery-first approach for correction of class III asymmetry were divided into three groups based on type of mandibular asymmetry. This previously reported classification system is simple and mutually independent, categorizing mandibular asymmetry according to the amount and direction of ramus asymmetry relative to menton deviation: patients with a larger transverse ramus distance on the menton deviation side were divided into group 1 and group 2; group 1 (n = 45) exhibited a menton deviation larger than ramus discrepancy; group 2 (n = 11) exhibited a menton deviation less than ramus discrepancy; group 3 (n = 22) had larger transverse ramus distance contralateral to the side of the menton deviation. Soft tissue facial asymmetry indices, calculated from cone beam computed tomography images, assessed midline and contour asymmetry presurgery, changes postsurgery, and outcomes. RESULTS: Compared with groups 1 and 2, the presurgery index for contour and midline asymmetry was smallest for group 3. All the three groups had significant improvement in midline asymmetry postsurgery, and outcome measures were good; there were no differences between groups. However, contour asymmetry only improved significantly for groups 1 and 2. The outcome for contour asymmetry was fair for groups 1 and 3 and poor for group 2. CONCLUSIONS: Bimaxillary surgery significantly improved facial midline asymmetry. The type of mandibular asymmetry was associated with postsurgical changes and outcomes for contour asymmetry. CLINICAL RELEVANCE: Understanding the types of mandibular asymmetry could help clinicians to develop treatment plans and predict treatment changes and outcomes.

Dynamic changes in genetic diversity, drug resistance mutations, and treatment outcomes of falciparum malaria from the low-transmission to the pre-elimination phase on the islands of São Tomé and Príncipe.

BACKGROUND: With effective vector control and case management, substantial progress has been made towards eliminating malaria on the islands of São Tomé and Príncipe (STP). This study assessed the dynamic changes in the genetic diversity of Plasmodium falciparum, the anti-malarial drug resistance mutations, and malaria treatment outcomes between 2010 and 2016 to provide insights for the prevention of malaria rebounding. METHODS: Polymorphic regions of merozoite surface proteins 1 and 2 (msp1 and msp2) were sequenced in 118 dried blood spots (DBSs) collected from malaria patients who had visited the Central Hospital in 2010-2016. Mutations in the multi-drug resistance I (pfmdr1), chloroquine resistance transporter (pfcrt), and kelch 13 (pfk13) genes were analysed by polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) and sequencing in 111 DBSs. A total of 7482 cases that completed a 28-day follow-up were evaluated for treatment outcomes based on the microscopic results. Regression models were used to characterize factors associated with levels of parasite density and treatment failures. RESULTS: Parasite strains in STP showed significant changes during and after the peak incidence in 2012. The prevalent allelic type in msp1 changed from K1 to MAD20, and that in msp2 changed from 3D7/IC to FC27. The dominant alleles of drug-resistance markers were pfmdr1 86Y, 184F, D1246, and pfcrt 76 T (Y-F-D-T, 51.4%). The average parasite density in malaria cases declined threefold from low-transmission (2010-2013) to pre-elimination period (2014-2016). Logistic regression models showed that patients with younger age (OR for age = 0.97-0.98, p < 0.001), higher initial parasite density (log10-transformed, OR = 1.44, p < 0.001), and receiving quinine treatment (compared to artemisinin-based combination therapy, OR = 1.91-1.96, p < 0.001) were more likely to experience treatment failures during follow-up. CONCLUSIONS: Plasmodium falciparum in STP had experienced changes in prevalent strains, and increased mutation frequencies in drug-resistance genes from the low-transmission to the pre-elimination settings. Notably, patients with younger age and receiving quinine treatment were more likely to show parasitological treatment failure during follow-up. Therapeutic efficacy should be carefully monitored to inform future treatment policy in STP.

Sleep, Distressed Appearance, and Quality of Life Relate to Satisfaction with Orthognathic Surgery.

BACKGROUND: In this study, we aimed to identify factors correlating with satisfaction with orthognathic surgery in order to improve its outcome. METHODS: We recruited 77 participants who had received orthognathic surgery and 32 age- and gender-matched normal-controls. Questionnaires that included devised questions for family support, Big Five Inventory, Derriford Appearance Score, Pittsburgh Sleep Quality Index, Hospital Anxiety and Depression Scale, 36-Item Short-Form Health Survey, and a visual analogy scale for satisfaction, were completed before and one month and nine months after the surgery. The statistical analysis methods included descriptive statistics, t-test, and Pearson correlation. RESULTS: All participants received the preoperative and one-month follow-up, while 28 also completed the nine-month follow-up. Satisfaction was not significantly related to demographic data, but long-term satisfaction was related to an extraverted personality. The preoperative and postoperative results of the Derriford Appearance Scale were related to short-term and long-term satisfaction. Furthermore, both the preoperative and one-month postoperative Pittsburgh Sleep Quality Index findings were significantly related to short-term satisfaction. The postoperative 36-Item Short-Form Health Survey was significantly related to short-term and long-term satisfaction. CONCLUSIONS: Not only subjective distress and dysfunction of appearance but also sleep problems and quality of life were correlated to satisfaction with orthognathic surgery. In the future, relevant interventions can be developed to further improve patient's satisfaction and their physical and mental health.