Laser-reduced graphene oxide for a flexible liquid sliding sensing surface.

Flexible electronic skin is a flexible sensor system that imitates human skin. Recently, flexible sensors have been successfully developed. However, the droplet sliding sensing technology on a flexible electronic skin surface is still challenging. In this Letter, a flexible droplet sliding sensing surface is proposed and fabricated by laser-reduced graphene oxide (LRGO). The LRGO shows porous structures and low surface energy, which are beneficial for infusing lubricants and fabricating stable slippery surfaces. The slippery surface guarantees free sliding of droplets. The droplet sliding sensing mechanism is a combination of triboelectricity and electrostatic induction. After a NaCl droplet slides from lubricant-infused LRGO, a potential difference (∼0.2 mV) can be measured between two Ag electrodes. This study reveals considerable potential applications in intelligent robots and the medical field.

Bioinspired Soft Robots Based on the Moisture-Responsive Graphene Oxide.

Graphene oxide (GO), which has many oxygen functional groups, is a promising candidate for use in moisture-responsive sensors and actuators due to the strong water-GO interaction and the ultrafast transport of water molecules within the stacked GO sheets. In the last 5 years, moisture-responsive actuators based on GO have shown distinct advantages over other stimuli-responsive materials and devices. Particularly, inspired by nature organisms, various moisture-enabled soft robots have been successfully developed via rational assembly of the GO-based actuators. Herein, the milestones in the development of moisture-responsive soft robots based on GO are summarized. In addition, the working mechanisms, design principles, current achievement, and prospects are also comprehensively reviewed. In particular, the GO-based soft robots are at the forefront of the advancement of automatable smart devices.

Bioinspired Surfaces With Switchable Wettability.

The surface wettability of plants exhibits many unique advantages, which enhances the environmental adaptability of plants. In view of the rapid development of responsive materials, smart surfaces have been explored extensively to regulate surface wettability through external stimuli. Herein, we summarized recent advancements in bioinspired surfaces with switchable wettability. Typical bioinspired surfaces with switchable wettability and their emerging applications have been reviewed. In the end, we have discussed the remaining challenges and provided perspective on future development.

Airflow Enhanced Solar Evaporation Based on Janus Graphene Membranes with Stable Interfacial Floatability.

Solar interfacial evaporation has been recognized as a versatile energy conversion protocol for cutting-edge applications such as water treatment and power generation (e.g., hydro voltaic effect). Recently, to enhance water evaporation rates, water temperature and evaporation area have been considered as essential ingredients, and thus photothermal materials and three-dimensional hierarchical structures have been developed to promote light-to-heat conversion efficiency and enhance interfacial evaporation. However, less attention has been paid to the airflow effect, because the interfacial floatability of photothermal membranes should be considered under air blast. Here, inspired from the stable interfacial floatability of lotus leaves, we report the airflow enhanced solar interfacial evaporation approach using a graphene-based Janus membrane. Laser-induced graphene (LIG) film was treated unilaterally by O2 plasma, forming a LIG/oxidized LIG (LIG-O) Janus membrane with distinct wettability on two sides. Higher water evaporation rate of 1.512 kg m-2 h-1 is achieved. The high solar interfacial evaporation performance can be attributed to the two advantages: (i) the combination of microscale capillary water transporting and nanoscale light trapping; (ii) hydrophobic/hydrophilic Janus membrane for stable interfacial floatability under airflow. Our approach is feasible for developing high-performance solar interfacial evaporation devices for practical clean energy utilization.

Programmable deformation of patterned bimorph actuator swarm.

Graphene-based actuators featuring fast and reversible deformation under various external stimuli are promising for soft robotics. However, these bimorph actuators are incapable of complex and programmable 3D deformation, which limits their practical application. Here, inspired from the collective coupling and coordination of living cells, we fabricated a moisture-responsive graphene actuator swarm that has programmable shape-changing capability by programming the SU-8 patterns underneath. To get better control over the deformation, we fabricated SU-8 micropattern arrays with specific geometries and orientations on a continuous graphene oxide film, forming a swarm of bimorph actuators. In this way, predictable and complex deformations, including bending, twisting, coiling, asymmetric bending, 3D folding, and combinations of these, have been achieved due to the collective coupling and coordination of the actuator swarm. This work proposes a new way to program the deformation of bilayer actuators, expanding the capabilities of existing bimorph actuators for applications in various smart devices.

Nacre-inspired moisture-responsive graphene actuators with robustness and self-healing properties.

Moisture-responsive actuators based on graphene oxide (GO) have attracted intensive research interest in recent years. However, current GO actuators suffer from low mechanical strength. Inspired by the robustness of nacre's structure, moisture-responsive actuators with high mechanical strength and self-healing properties were successfully developed based on GO and cellulose fiber (CF) hybrids. The hybrid paper demonstrated significantly improved tensile strength, ∼20 times higher than that of pure GO paper, and self-healing properties. A broken paper can be well cured under moist conditions, and the mechanical properties of the self-healed hybrid paper can still maintain similar tensile strength to the pristine one. After controllable ultraviolet light photoreduction treatment, a hybrid paper with a photoreduction gradient along the normal direction was prepared, which can act as a moisture-responsive actuator. A maximum bending curvature of ∼1.48 cm-1 can be achieved under high relative humidity (RH = 97%). As a proof-of-concept, a butterfly-like actuator that can deform itself with moisture actuation was demonstrated. Our approach may pave a new way for designing robust and self-healable graphene actuators.

Laser Fabrication of Graphene-Based Electronic Skin.

Graphene is promising for developing soft and flexible electronic skin. However, technologies for graphene processing is still at an early stage, which limits the applications of graphene in advanced electronics. Laser processing technologies permits mask-free and chemical-free patterning of graphene, revealing the potential for developing graphene-based electronics. In this minireview, we overviewed and summarized the recent progresses of laser enabled graphene-based electronic skins. Two typical strategies, laser reduction of graphene oxide (GO) and laser induced graphene (LIG) on polyimide (PI), have been introduced toward the fabrication of graphene electronic skins. The advancement of laser processing technology would push forward the rapid progress of graphene electronic skin.

Direct laser writing of flexible planar supercapacitors based on GO and black phosphorus quantum dot nanocomposites.

The research interest in wearable electronics has continuously stimulated the development of flexible energy storage systems with high performance and robustness. However, open problems with respect to energy storage efficiency and device integration are still challenging. Here, we demonstrate the laser fabrication of flexible planar supercapacitors based on graphene oxide (GO) and black phosphorus quantum dot (BPQD) nanocomposites. By combining graphene and BPQDs, the resultant supercapacitors feature high conductivity and activity, demonstrating enhanced specific capacity and superior rate performance, compared to those based on reduced GO (RGO) alone. Furthermore, the as-obtained devices present outstanding flexibility. Their performance shows unobvious degradation after repeated cycles of bending and straightening. Additionally, with the help of direct laser writing (DLW) technology, integration of the supercapacitors has been achieved without the need for any metal interconnection. The integrated devices delivered reasonable performance uniformity with a voltage extension of 3 V, which could easily power a LED. The supercapacitor-based RGO and BPQD nanocomposites demonstrate great potential for practical applications in flexible and wearable electronics.

Antidepressant-like action of agmatine in the acute and sub-acute mouse models of depression: a receptor mechanism study.

Previous studies have shown that agmatine, a potential neuromodulator or co-transmitter, exhibited antidepressant-like action in animal models, yet its mechanism, especially the receptor mechanism, remains unclear. In the present study, using efaroxan, a preferential antagonist of I1 imidazoline receptor (I1R) and yohimbine, an antagonist of α2 adrenergic receptor (α2AR), we investigated the roles of I1R and α2AR in agmatine's antidepressant-like effect in acute and sub-acute depression models in mice. We found that in the tail-suspension test (TST) and the forced swimming test (FST), acute administration of agmatine (20 and 40 mg/kg, p.o.) significantly shortened the immobility time. Concurrent administration of efaroxan (1 mg/kg, i.p.) completely abolished the antidepressant-like effects of agmatine (40 mg/kg, p.o.) whereas yohimbine (5 mg/kg, i.p.) failed to exert similar effects, suggesting that the acute antidepressant-like effects of agmatine was mainly mediated by I1R but not α2AR. Additionally, in the learned helplessness (LH) test, repeated administration of agmatine (20 mg/kg, p.o., q.d.) for 5 days significantly decreased the escape latency and the number of escape failure, and these effects were respectively abolished by concurrent administration of efaroxan (0.5 mg/kg,i.p., q.d.) and yohimbine (3 mg/kg, i.p., q.d.) for 5 days, suggesting that the antidepressant-like action of agmatine in the LH test was achieved via the activation of both I1R and α2AR. In summary, we found that the antidepressant-like effects of agmatine in the TST and the FST were mediated by activating I1R and in the sub-acute LH test were mediated by activating both I1R and α2AR.