Rapid and Convenient Potentiometric Method for Determining Fluorosulfate, a Byproduct of the Fumigant and Greenhouse Gas Sulfuryl Fluoride.

A fluorosulfate ion (FSO3-) is a hydrolysis product of sulfuryl fluoride (SO2F2), which is widely used to fumigate buildings, soil, construction materials, and postharvest commodities, and is a potent greenhouse gas. It is a potential marker for biological exposure to SO2F2 and for monitoring the progress of reactions used to scrub SO2F2 from fumigation vent gases. Here, we report a simple and inexpensive potentiometric method for determining FSO3- using a commercial nitrate-selective electrode and discuss its application. The method is suitable for solutions between 0.0025 mM and 660 mM FSO3- at initial pH between 5 and 9. Halide interference depends on its molar ratio to FSO3- and follows the sequence, F- < Cl- < Br- ≪ I-. Halide interference can be eliminated by adding silver sulfate. Interference by bicarbonate can be eliminated by H2SO4 pretreatment, and interference by phosphate or pyrophosphate by MgSO4 addition. Sulfate does not interfere, as it does in ion chromatography. Satisfactory method detection limits for FSO3- in spiked aqueous extracts of 11 fruits were obtained. The method accurately quantified the yield of FSO3- relative to that of F- in base hydrolysis of SO2F2. This study demonstrates that the developed method is highly selective, convenient, and sensitive and thus can be of great value in practice.

Optimizing Molecular Packing via Steric Hindrance for Reducing Non-Radiative Recombination in Organic Solar Cells.

Innovative molecule design strategy holds promise for the development of next-generation acceptor materials for efficient organic solar cells with low non-radiative energy loss (ΔEnr). In this study, we designed and prepared three novel acceptors, namely BTP-Biso, BTP-Bme and BTP-B, with sterically structured triisopropylbenzene, trimethylbenzene and benzene as side chains inserted into the shoulder of the central core. The progressively enlarged steric hindrance from BTP-B to BTP-Bme and BTP-Biso induces suppressed intramolecular rotation and altered the molecule packing mode in their aggregation states, leading to significant changes in absorption spectra and energy levels. By regulating the intermolecular π-π interactions, BTP-Bme possesses relatively reduced non-radiative recombination rate and extended exciton diffusion lengths. The binary device based on PB2:BTP-Bme exhibits an impressive power conversion efficiency (PCE) of 18.5% with a low ΔEnr of 0.19 eV. Furthermore, the ternary device comprising PB2:PBDB-TF:BTP-Bme achieves an outstanding PCE of 19.3%. The molecule design strategy in this study proposed new perspectives for developing high-performance acceptors with low ΔEnr in OSCs.

Size-dependent photoluminescence blinking mechanisms and volume scaling of biexciton Auger recombination in single CsPbI3 perovskite quantum dots.

Determining the correlation between the size of a single quantum dot (QD) and its photoluminescence (PL) properties is a challenging task. In the study, we determine the size of each QD by measuring its absorption cross section, which allows for accurate investigation of size-dependent PL blinking mechanisms and volume scaling of the biexciton Auger recombination at the single-particle level. A significant correlation between the blinking mechanism and QD size is observed under low excitation conditions. When the QD size is smaller than their Bohr diameter, single CsPbI3 perovskite QDs tend to exhibit BC-blinking, whereas they tend to exhibit Auger-blinking when the QD size exceeds their Bohr diameter. In addition, by extracting bright-state photons from the PL intensity trajectories, the effects of QD charging and surface defects on the biexcitons are effectively reduced. This allows for a more accurate measurement of the volume scaling of biexciton Auger recombination in weakly confined CsPbI3 perovskite QDs at the single-dot level, revealing a superlinear volume scaling (τXX,Auger ∝ σ1.96).

Boosting Photocatalytic CO2 Methanation through Interface Fusion over CdS Quantum Dot Aerogels.

In the field of photocatalytic CO2 reduction, quantum dot (QD) assemblies have emerged as promising candidate photocatalysts due to their superior light absorption and better substrate adsorption. However, the poor contacts within QD assemblies lead to low interfacial charge transfer efficiency, making QD assemblies suffer from unsatisfactory photocatalytic performance. Herein, a novel approach is presented involving the construction of strongly interfacial fused CdS QD assemblies (CdS QD gel) for CO2 reduction. The novel CdS QD gel demonstrates outstanding photocatalytic performance for CO2 methanation, achieving a CH4 generation rate of ≈296 µmol g-1 h-1, with a selectivity surpassing 76% and an apparent quantum yield (AQY) of 1.4%. Further investigations reveal that the robust interfacial fusion in these CdS QDs not only boosts their ability to absorb visible light but also significantly promotes charge separation. The present work paves the way for utilizing QD gel photocatalysts in realizing efficient CO2 reduction and highlights the critical role of interfacial engineering in photocatalysts.

Iterative feedback-based models for image and video polyp segmentation.

Accurate segmentation of polyps in colonoscopy images has gained significant attention in recent years, given its crucial role in automated colorectal cancer diagnosis. Many existing deep learning-based methods follow a one-stage processing pipeline, often involving feature fusion across different levels or utilizing boundary-related attention mechanisms. Drawing on the success of applying Iterative Feedback Units (IFU) in image polyp segmentation, this paper proposes FlowICBNet by extending the IFU to the domain of video polyp segmentation. By harnessing the unique capabilities of IFU to propagate and refine past segmentation results, our method proves effective in mitigating challenges linked to the inherent limitations of endoscopic imaging, notably the presence of frequent camera shake and frame defocusing. Furthermore, in FlowICBNet, we introduce two pivotal modules: Reference Frame Selection (RFS) and Flow Guided Warping (FGW). These modules play a crucial role in filtering and selecting the most suitable historical reference frames for the task at hand. The experimental results on a large video polyp segmentation dataset demonstrate that our method can significantly outperform state-of-the-art methods by notable margins achieving an average metrics improvement of 7.5% on SUN-SEG-Easy and 7.4% on SUN-SEG-Hard. Our code is available at https://github.com/eraserNut/ICBNet.

Individualized survival prediction and surgery recommendation for patients with glioblastoma.

Background: There is a lack of individualized evidence on surgical choices for glioblastoma (GBM) patients. Aim: This study aimed to make individualized treatment recommendations for patients with GBM and to determine the importance of demographic and tumor characteristic variables in the selection of extent of resection. Methods: We proposed Balanced Decision Ensembles (BDE) to make survival predictions and individualized treatment recommendations. We developed several DL models to counterfactually predict the individual treatment effect (ITE) of patients with GBM. We divided the patients into the recommended (Rec.) and anti-recommended groups based on whether their actual treatment was consistent with the model recommendation. Results: The BDE achieved the best recommendation effects (difference in restricted mean survival time (dRMST): 5.90; 95% confidence interval (CI), 4.40-7.39; hazard ratio (HR): 0.71; 95% CI, 0.65-0.77), followed by BITES and DeepSurv. Inverse probability treatment weighting (IPTW)-adjusted HR, IPTW-adjusted OR, natural direct effect, and control direct effect demonstrated better survival outcomes of the Rec. group. Conclusion: The ITE calculation method is crucial, as it may result in better or worse recommendations. Furthermore, the significant protective effects of machine recommendations on survival time and mortality indicate the superiority of the model for application in patients with GBM. Overall, the model identifies patients with tumors located in the right and left frontal and middle temporal lobes, as well as those with larger tumor sizes, as optimal candidates for SpTR.

Development a high-sensitivity sandwich ELISA for determining antigen content of porcine circovirus type 2 vaccines.

Porcine circovirus type 2 (PCV2) is intensely prevalent in global pig farms. The PCV2 vaccine is an important means of preventing and controlling PCV2. The quality control of PCV2 vaccines is predominantly based on detection techniques such as animal testing and neutralizing antibody titration. Measuring the content of effective proteins in vaccines to measure vaccine efficacy is an excellent alternative to traditional methods, which can greatly accelerate the development speed and testing time of vaccines. In this study, we screened a monoclonal antibody (mAb) that can effectively recognize not only the exogenous expression of PCV2 Cap protein but also PCV2 virus. The double antibody sandwich ELISA (DAS-ELISA) was developed using this mAb that specifically recognize PCV2 Cap. The minimum protein content detected by this method is 3.5 ng/mL. This method can be used for the quality control of PCV2 inactivated vaccine and subunit vaccine, and the detection results are consistent with the results of mice animal experiments. This method has the advantages of simple operation, good sensitivity, high specificity and wide application. It can detect the effective antigen Cap protein content of various types of PCV2 vaccines, which not only shorten the vaccine inspection time but also save costs.

Rubidium Doped Cs2AgBiBr6 Hierarchical Microsphere for Enhanced Photocatalytic CO2 Reduction.

Halide perovskites have garnered significant attention for their unique optoelectronic properties in solar-to-fuel conversions. However, the efficiency of halide perovskites in the field of photocatalytic CO2 reduction is largely limited by serious charge recombination and a lack of efficient active sites. In this work, a rubidium (Rb) doped Cs2AgBiBr6 (Rb:CABB) hierarchical microsphere is developed for photocatalytic CO2 reduction. Experimental and theoretical analysis discloses that partially substituting Rb+ for Ag+ can effectively modulate the electronic structure of CABB, favoring charge separation and making adjacent Bi atoms an electron-rich active site. Further investigations indicated that Rb doping also reduces the energy barriers of the rate-determining step in CO2 reduction. As a result, Rb:CABB demonstrated an enhanced CO yield compared to its undoped counterpart. This work presents a promising approach to optimizing the electronic structures of photocatalysts and paving a new way for exploring halide perovskites for photocatalytic CO2 reduction.

AATCT-IDS: A benchmark Abdominal Adipose Tissue CT Image Dataset for image denoising, semantic segmentation, and radiomics evaluation.

BACKGROUND AND OBJECTIVE: The metabolic syndrome induced by obesity is closely associated with cardiovascular disease, and the prevalence is increasing globally, year by year. Obesity is a risk marker for detecting this disease. However, current research on computer-aided detection of adipose distribution is hampered by the lack of open-source large abdominal adipose datasets. METHODS: In this study, a benchmark Abdominal Adipose Tissue CT Image Dataset (AATCT-IDS) containing 300 subjects is prepared and published. AATCT-IDS publics 13,732 raw CT slices, and the researchers individually annotate the subcutaneous and visceral adipose tissue regions of 3213 of those slices that have the same slice distance to validate denoising methods, train semantic segmentation models, and study radiomics. For different tasks, this paper compares and analyzes the performance of various methods on AATCT-IDS by combining the visualization results and evaluation data. Thus, verify the research potential of this data set in the above three types of tasks. RESULTS: In the comparative study of image denoising, algorithms using a smoothing strategy suppress mixed noise at the expense of image details and obtain better evaluation data. Methods such as BM3D preserve the original image structure better, although the evaluation data are slightly lower. The results show significant differences among them. In the comparative study of semantic segmentation of abdominal adipose tissue, the segmentation results of adipose tissue by each model show different structural characteristics. Among them, BiSeNet obtains segmentation results only slightly inferior to U-Net with the shortest training time and effectively separates small and isolated adipose tissue. In addition, the radiomics study based on AATCT-IDS reveals three adipose distributions in the subject population. CONCLUSION: AATCT-IDS contains the ground truth of adipose tissue regions in abdominal CT slices. This open-source dataset can attract researchers to explore the multi-dimensional characteristics of abdominal adipose tissue and thus help physicians and patients in clinical practice. AATCT-IDS is freely published for non-commercial purpose at: https://figshare.com/articles/dataset/AATTCT-IDS/23807256.

Improvement of nucleotide content of Cordyceps tenuipes by Schisandra chinensis: fermentation process optimization and application prospects.

Nucleotides are important components and the main indicators for judging Cordyceps quality. In this paper, the mixed fermentation process of Schisandra chinensis and Cordyceps tenuipes was systematically studied, and it was proposed that the fermentation products aqueous extract (S-ZAE) had antioxidant activity and anti-AChE ability. Herein, the results of a single factor showed that S. chinensis, yeast extract, inoculum amount, and pH had significant effects on nucleotide synthesis. The fermentation process optimization results were 3% glucose, 0.25% KH2PO4, 2.1% yeast extract, and S. chinensis 0.49% (m/v), the optimal fermentation conditions were 25℃, inoculum 5.8% (v/v), pH 3.8, 6 d. The yield of total nucleotides in the scale-up culture was 0.64 ± 0.027 mg/mL, which was 10.6 times higher than before optimization. S-ZAE has good antioxidant and anti-AChE activities (IC50 0.50 ± 0.050 mg/mL). This fermentation method has the advantage of industrialization, and its fermentation products have the potential to become good functional foods or natural therapeutic agents.

Intracellular Staphylococcus aureus infection in human osteoblasts: circRNA expression analysis.

Staphylococcus aureus (S. aureus) has the ability to invade human cortical bones and cause intracellular infections in osteoblasts, which may lead to a long-term infection that is difficult to eliminate. It is critical to identify the underlying mechanisms of the osteoblast response to the intracellular S. aureus. More recently, multiple circular RNA (circRNA) functions have been identified, including serving as protein scaffolds or miRNA sponges and being translated into polypeptides. The role that circRNAs play in intracellular S. aureus infection of osteoblasts has not, to our knowledge, been investigated. Here, we established an intracellular infection model of S. aureus in osteoblasts and compared the circRNA expression of osteoblasts between the infected and control groups using RNA sequencing technology, by which a significant difference was found. In total, 117 upregulated and 125 down-regulated differentially expressed circRNAs (DEcircRNAs) were identified, and reverse transcription-quantitative PCR was employed to validate the results of RNA sequencing. Gene Ontology and Kyoto Encyclopedia of Genes and Genomes pathway analyses demonstrated that DEcircRNAs were enriched in processes associated with macromolecule modification, cellular component organization or biogenesis, and intracellular non-membrane-bound organelles. Finally, a potentially important network of circRNA-miRNA-mRNA based on the DEcircRNAs was constructed. Overall, this study revealed the circRNA expression profile of human osteoblasts infected by intracellular S. aureus for the first time, and identified the circRNAs that may contribute to the pathogenesis of infectious diseases caused by intracellular S. aureus infection in human osteoblasts.

[Clinical study of ear keloids with surgical excision and intraoperative low-energy X-ray irradiation therapy].

Objective:To explore the clinical efficacy of surgical excision combined with low-energy X-ray irradiation in the treatment of ear keloids. Methods:Clinical data of 32 cases of ear keloid lesions that received surgical treatment alone or surgery combined with radiotherapy from March 2019 to November 2022 in the Department of Otorhinolaryngology Head and Neck Surgery of the Tianjin First Central Hospital were retrospectively analyzed. Among them, 10 cases received radiotherapy and 22 cases did not receive radiotherapy. The radiotherapy group received irradiation with a large divided dose of 50 kV low-energy X-rays. The mode of fractionation radiotherapy was as follows: the first was 10 Gy of intraoperative radiation therapy and the second was 8 Gy on the 3rd postoperative day for a total of 18 Gy. The local efficacy and skin radiation reaction were observed at a follow-up of 8-52 months. Results:The median follow-up was 26 months, and as of the date of the last follow-up, 9 cases were cured and 1 case was ineffective in the radiotherapy group, with an effective rate of 90.0%, while 9 cases were cured and 13 cases were ineffective in the no-radiotherapy group, with an effective rate of 40.9%. The recurrence of ear keloids was not related to the side, site, or etiology of the patient's onset（P>0.05）. Recurrence was related to whether or not the patients received radiotherapy（χ²=4.885, P<0.05）, and the recurrence rate in the radiotherapy group（10.0%） was significantly lower than that in the non-radiotherapy group（59.1%）. Conclusion:Surgical excision combined with low-energy X-ray irradiation therapy is an effective method of treating keloids in the ear, especially with intraoperative radiation therapy can achieve more satisfactory results.

MARCH5 promotes aerobic glycolysis to facilitate ovarian cancer progression via ubiquitinating MPC1.

MARCH5 is a ring-finger E3 ubiquitin ligase located in the outer membrane of mitochondria. A previous study has reported that MARCH5 was up-regulated and contributed to the migration and invasion of OC cells by serving as a competing endogenous RNA. However, as a mitochondrial localized E3 ubiquitin ligase, the function of MARCH5 in mitochondrial-associated metabolism reprogramming in human cancers remains largely unexplored, including OC. We first assessed the glycolysis effect of MARCH5 in OC both in vitro and in vivo. Then we analyzed the effect of MARCH5 knockdown or overexpression on respiratory activity by evaluating oxygen consumption rate, activities of OXPHOS complexes and production of ATP in OC cells with MARCH5. Co-immunoprecipitation, western-blot, and in vitro and vivo experiments were performed to investigate the molecular mechanisms underlying MARCH5-enhanced aerobic glycolysis s in OC. In this study, we demonstrate that the abnormal upregulation of MARCH5 is accompanied by significantly increased aerobic glycolysis in OC. Mechanistically, MARCH5 promotes aerobic glycolysis via ubiquitinating and degrading mitochondrial pyruvate carrier 1 (MPC1), which mediates the transport of cytosolic pyruvate into mitochondria by localizing on mitochondria outer membrane. In line with this, MPC1 expression is significantly decreased and its downregulation is closely correlated with unfavorable survival. Furthermore, in vitro and in vivo assays revealed that MARCH5 upregulation-enhanced aerobic glycolysis played a critical role in the proliferation and metastasis of OC cells. Taken together, we identify a MARCH5-regulated aerobic glycolysis mechanism by degradation of MPC1, and provide a rationale for therapeutic targeting of aerobic glycolysis via MARCH5-MPC1 axis inhibition.

Highly Efficient and Stable Organic Photovoltaic Cells for Underwater Applications.

Organic photovoltaic (OPV) technology holds tremendous promise as a sustainable power source for underwater off-grid systems. However, research on underwater OPV cells is relatively scarce. Here, this gap is addressed by focusing on the exploration and development of OPV cells specifically designed for underwater applications. An acceptor, named ITO-4Cl, with excellent water resistance, is rationally designed and synthesized. Benefiting from its low energetic disorder and an absorption spectrum well-suited to the underwater environment, the ITO-4Cl-based OPV cell achieves an unprecedented power conversion efficiency (PCE) of over 25.6% at a water depth of 1 m. Additionally, under 660 nm laser irradiation, the cell demonstrates a notable PCE of 31.6%, indicating its potential for underwater wireless energy transfer. Due to the mitigation of thermal effects from solar irradiation, the lifetime of the ITO-4Cl-based OPV cell exceeds 7000 h. Additionally, a flexible OPV cell is fabricated that maintains its initial PCE even under exposure to high pressures of 5 MPa. A 32.5 cm2 flexible module achieves an excellent PCE of 17%. This work fosters a deeper understanding of underwater OPV cells and highlights the promising prospects of OPV cells for underwater applications.

Plasma serotonin precursors and metabolite are correlated with bone mineral density and bone turnover markers in patients with postmenopausal osteoporosis.

BACKGROUND: Serotonin (5-HT) precursors regulate bone remodeling. This study aims to investigate the correlation of plasma 5-HT precursors and metabolite with bone mineral density (BMD) and bone turnover markers in postmenopausal osteoporosis (PMOP) patients. METHODS: The age, body mass index (BMI), and years since menopause (YSM) were documented for 348 postmenopausal women in normal/osteopenia/osteoporosis (OP) groups, with lumbar spine and femoral neck BMD measured. Serum bone turnover markers (PINP/ß-CTX) and plasma 5-HT, 5-HT precursors (Trp/5-HTP) and metabolite (5-HIAA) were measured by ELISA. OP patients were allocated to high/low expression groups following ROC analysis of 5-HT/Trp/5-HTP/5-HIAA. The relationship of plasma 5-HT/Trp/5-HTP/5-HIAA, BMD, and bone turnover markers with PMOP was analyzed using logistic regression analysis. The correlation of plasma 5-HT/Trp/5-HTP/5-HIAA with BMD and bone turnover markers was analyzed using Pearson's correlation analysis, followed by logistic regression analysis of the relationship between plasma 5-HT/Trp/5-HTP/5-HIAA and BMD, bone turnover markers and PMOP. RESULTS: BMI, YSM, BMD and PINP, and ß-CTX levels differed among groups. Levels of plasma 5-HT precursors/metabolite were increased in OP patients. Individuals with high 5-HT precursors/metabolite levels had low BMD and high PINP/ß-CTX levels. The 5-HT precursors/metabolite negatively-correlated with BMD and positively-correlated with PINP/ß-CTX. BMI, YSM, BMD, and PINP/ß-CTX/Trp/5-HTP/5-HT related to PMOP and were independent risk factors for OP. CONCLUSION: Plasma 5-HT precursors and metabolite negatively-correlate with BMD and positively-correlate with PINP/ß-CTX in PMOP patients. Peripheral 5-HT precursors and metabolite level may be a new direction of treatment of PMOP and bone metabolism-related disorders.

Molecular Design of Fully Nonfused Acceptors for Efficient Organic Photovoltaic Cells.

The nonfused thiophene-benzene-thiophene (TBT) unit offers advantages in obtaining low-cost organic photovoltaic (OPV) materials due to its simple structure. However, OPV cells, including TBT-based acceptors, exhibit significantly lower energy conversion efficiencies. Here, we introduce a novel approach involving the design and synthesis of three TBT-based acceptors by substituting different position-branched side chains on the TBT unit. In comparison to TBT-10 and TBT-11, TBT-13, which exclusively incorporates α-position branched side chains with a large steric hindrance, demonstrates a more planar and stable conformation. When blended with the donor PBQx-TF, TBT-13-based blend film achieves favorable π-π stacking and aggregation characteristics, resulting in excellent charge transfer performance in the corresponding device. Due to the simultaneous enhancements in short-circuit current density and fill factor, the TBT-13-based OPV cell obtains an outstanding efficiency of 16.1%, marking the highest value for the cells based on fully nonfused acceptors. Our work provides a practical molecular design strategy for high-performance and low-cost OPV materials.

Comparison of treatment performance and microbial community evolution of typical dye wastewater by different combined processes.

The degradation of typical dye wastewater is a focus of research in the printing and dyeing industry. In this study, a combined micro-electrolysis and microbial treatment method was established to treat refractory dye wastewater, and the pivotal factors in the microbial treatment were optimized. In the series and coupled modes, the removal rates of chroma reached 98.75% and 92.50%, and the removal rates of chemical oxygen demand (COD) reached 96.17% and 82.29%, respectively. The high-throughput sequencing results showed that the microbial communities in the microbial system varied at different treatment stages. From the culture stage to the domestication stage, the dominant phylum was Proteobacteria; however, the community abundance of microorganisms decreased. A combination of micro-electrolysis and biological methods can alter the characteristics of the microbial community, increase the number of dominant phyla, and increase the abundance of microorganisms. The degradation effect of the series mode and the overall strengthening effect of micro-electrolysis on the microorganisms were better than those of the coupled mode. In actual wastewater, the maximum removal rates of chroma, COD, total nitrogen (TN), ammonia nitrogen (NH3-N), and total phosphorus (TP) are 97.50%, 98.90%, 94.35%, 93.95%, and 91.17%, respectively. Three-dimensional fluorescence spectrum analysis showed that microbial processes could significantly degrade fluorescent components in wastewater, and methanogenic active enzymes in anaerobic processes could continue to react. The combined process can realize the efficient treatment of toxic dye wastewater by reducing the toxicity of wastewater and efficiently degrading organic matter, which has important guiding significance for the treatment of refractory dye wastewater.

Achieving High Fill Factor in Organic Photovoltaic Cells by Tuning Molecular Electrostatic Potential Fluctuation.

In the field of organic photovoltaics (OPVs), significant progress has been made in tailoring molecular structures to enhance the open-circuit voltage and the short-circuit current density. However, there remains a crucial gap in the development of coordinated material design strategies focused on improving the fill factor (FF). Here, we introduce a molecular design strategy that incorporates electrostatic potential fluctuation to design organic photovoltaic materials. By reducing the fluctuation amplitude of IT-4F, we synthesized a new acceptor named ITOC6-4F. When using PBQx-TF as a donor, the ITOC6-4F-based cell shows a markedly low recombination rate constant of 0.66×10-14 cm3 s-1 and demonstrates an outstanding FF of 0.816, both of which are new records for binary OPV cells. Also, we find that a small fluctuation amplitude could decrease the energetic disorder of OPV cells, reducing energy loss. Finally, the ITOC6-4F-based cell creates the highest efficiency of 16.0 % among medium-gap OPV cells. Our work holds a vital implication for guiding the design of high-performance OPV materials.