Reducing nonradiative recombination for highly efficient inverted perovskite solar cells via a synergistic bimolecular interface.

Reducing interface nonradiative recombination is important for realizing highly efficient perovskite solar cells. In this work, we develop a synergistic bimolecular interlayer (SBI) strategy via 4-methoxyphenylphosphonic acid (MPA) and 2-phenylethylammonium iodide (PEAI) to functionalize the perovskite interface. MPA induces an in-situ chemical reaction at the perovskite surface via forming strong P-O-Pb covalent bonds that diminish the surface defect density and upshift the surface Fermi level. PEAI further creates an additional negative surface dipole so that a more n-type perovskite surface is constructed, which enhances electron extraction at the top interface. With this cooperative surface treatment, we greatly minimize interface nonradiative recombination through both enhanced defect passivation and improved energetics. The resulting p-i-n device achieves a stabilized power conversion efficiency of 25.53% and one of the smallest nonradiative recombination induced Voc loss of only 59 mV reported to date. We also obtain a certified efficiency of 25.05%. This work sheds light on the synergistic interface engineering for further improvement of perovskite solar cells.

Subclinical impairment of left ventricular myocardium function in type 2 diabetes mellitus patients with or without hypertension.

BACKGROUND: Cardiovascular disease has been the leading cause of morbidity and mortality for type 2 diabetes mellitus (T2DM) patients over the last decade. AIM: To determine whether layer-specific global longitudinal strain (GLS) combined with peak strain dispersion (PSD) can be used to assess left ventricle (LV) myocardium systolic dysfunction in T2DM patients or without hypertension (HP). METHODS: We enrolled 97 T2DM patients, 70 T2DM + HP patients and 101 healthy subjects. Layer-specific GLS and PSD were calculated by EchoPAC software in apical three-, four- and two-chamber views. GLS of the epimyocardial, middle-layer and endomyocardial (GLSepi, GLSmid, and GLSendo) were measured and recorded. Receiver operating characteristic analysis was performed to detect LV myocardium systolic dysfunction in T2DM patients. RESULTS: There were significant differences in GLSepi, GLSmid, GLSendo, and PSD between healthy subjects, T2DM patients and T2DM patients with HP (P < 0.001). Trend tests yielded the ranking of healthy subjects > T2DM patients > T2DM with HP patients in the absolute values of GLSepi, GLSmid and GLSendo (P < 0.001), while PSD was ranked healthy subjects < T2DM < T2DM with HP (P < 0.001). Layer-specific GLS and PSD had high diagnostic efficiency for detecting LV myocardium systolic dysfunction in T2DM patients, however, the area under the curve (AUC) for layer-specific GLS and PSD combined was significantly higher than the AUCs for the individual indices (P < 0.05). CONCLUSION: Layer-specific GLS and PSD were associated with LV myocardium systolic dysfunction in T2DM patients, T2DM patients with HP. T2DM patients with HP have more severe LV myocardium systolic dysfunction than T2DM patients without HP and normal control patients. The combination of layer-specific GLS and PSD may provide additional prognostic information for T2DM patients with or without HP.

Rapid redox-response featured visual ascorbic acid sensor based on simple-assembled europium metal-organic framework.

A facile, fast and visible sensing platform for ascorbic acid (AA) detection has been developed based on self-assembled hydrangea-like europium metal-organic framework (HL-EuMOF). HL-EuMOF was synthesized through a simple one-step mixing process with Eu3+ and 1, 10-phenanthroline-2, 9-dicarboxylic acid at room temperature, which exhibited excellent properties including strong red fluorescence, long decay lifetime (548.623 µs) and good luminescent stability. Based on the specific redox reaction between Fe3+ and AA, the HL-EuMOF@Fe3+ was fabricated with "turn-off" response for AA, where the resulting Fe2+ displayed effective fluorescence quenching ability toward HL-EuMOF. The sensor demonstrated low detection limit (31.94 nM), rapid response time (30 s) and high selectivity. Integration of smartphone-assisted RGB analysis with HL-EuMOF@Fe3+ permitted convenient and visible quantitative determination of AA level. This approach also presented good detection performances in complex human serum and beverage samples, which could provide a valuable tool for AA detection in biomedical research and food industry.

Complex phenotype in Fanconi renotubular syndrome type 1: Hypophosphatemic rickets as the predominant presentation.

GATM-related Fanconi renotubular syndrome 1 (FRTS1) is a form of renal Fanconi syndrome (RFS), which is a disorder of solute and water reabsorption caused by defects in the function of the entire proximal tubule. Recent findings reveal the molecular basis of FRTS1: Intramitochondrial fiber aggregation triggered by mutant GATM provides a starting point for proximal tubule damage and drives disease progression. As a rare and newly recognized inherited kidney disease, the complex manifestations of FRTS1 are easily underdiagnosed or misdiagnosed. We discuss the complex phenotype of a 26-year-old woman with onset in infancy and a long history of hypophosphatemic rickets. We also identified a novel heterozygous missense variant in the GATM gene in this patient. The novel variant and phenotype we report expand the disease spectrum of FRTS1. We recommend screening for GATM in children with RFS, especially in patients with resistant rickets who have previously had negative genetic testing. In addition, we found pathological deposition of mutant GATM proteins within mitochondria in the patient's urinary sediment cells by a combination of electron microscopy and immunofluorescence. This unique urine cytology experiment has the potential to be a valuable tool for identifying patients with RRTS1.

Excited State Dynamics and Transport of Self-Trapped Excitons in Bi-Doped Cs2Na0.4Ag0.6In(1-y)BiyCl6 Double Perovskites.

Lead-free double perovskites (DPs) have become notable in white light emission applications due to the self-trapped exciton (STE) formation in the excited state. However, the mechanism understanding of the excited state dynamics and transport of STE remains ambiguous. Here, we demonstrate a new STE (Bi-STE) forming in tiny Bi-doped Cs2Na0.4Ag0.6InCl6, alongside its intrinsic STE (i-STE), resulting in the DPs photoluminescence quantum yield (PLQY) increasing to as high as >90%. The i-STE exhibits faster formation (60 fs) and slower relaxation dynamics (2.8 µs) compared to the Bi-STE. Moreover, we unveil that the Bi doping can augment the i-STE diffusion properties to attain a diffusion coefficient (diffusion length) of 0.012 cm2 s-1 (1.7 µm) at room temperature, indicating their promise in photovoltaic applications. Our results shed light on significant STE dynamics and transport mechanisms in DPs, providing a new roadmap for advancing existing and crafting new DPs in light emission applications.

Novel Experimental Mouse Model to Study the Pathogenesis and Therapy of Actinobacillus pleuropneumoniae Infection.

Actinobacillus pleuropneumoniae (APP) is a major cause of lung infections in pigs. An experimental mouse has the edge over pigs pertaining to the ease of experimental operation, disease study and therapy, abundance of genetic resources, and cost. However, it is a challenge to introduce APP into a mouse lung due to the small respiratory tract of mice and bacterial host tropism. In this study, an effective airborne transmission of APP serovar 1 (APP1) was developed in mice for lung infection. Consequently, APP1 infected BALB/c mice and caused 60% death within three days of infection at the indicated condition. APP1 seemed to enter the lung and, in turn, spread to other organs of the mice over the first 5 days after infection. Accordingly, APP1 damaged the lung as evidenced by its morphological and histological examinations. Furthermore, ampicillin fully protected mice against APP1 as shown by their survival, clinical symptoms, body weight loss, APP1 count, and lung damages. Finally, the virulence of two extra APP strains, APP2 and APP5, in the model was compared based on the survival rate of mice. Collectively, this study successfully established a fast and reliable mouse model of APP which can benefit APP research and therapy. Such a model is a potentially useful model for airway bacterial infections.

Identification and classification of surface defects for digital twin models of the workpiece.

Workpiece surface defect detection is an indispensable part of intelligent production. The surface information obtained by traditional 2D image detection has some limitations due to the influence of environmental light factors and part complexity. However, the digital twin model has the characteristics of high fidelity and scalability, and the digital twin surface can be obtained by a device with a scanning accuracy of 0.02mm to achieve the representation of the real surface of the workpiece. The surface defect detection system for digital twin models is proposed based on the improved YOLOv5 model in this paper. Firstly, the digital twin model of the workpiece is reconstructed by the point cloud data obtained by the scanning device, and the surface features with defects are captured. Subsequently, the training dataset is calibrated based on the defect surface, where the defect types include Inclusion, Perforation, pitting surface and Rolled-in scale. Finally, the improved YOLOv5 model with CBAM mechanism and BiFPN module was used to identify the surface defects of the digital twin model and compare it with the original YOLOv5 model and other common models. The results show that the improved YOLOv5 model can realize the identification and classification of surface defects. Compared with the original YOLOv5 model, the mAP value of the improved YOLOv5 model has increased by 0.2%, and the model has high precision. On the basis of the same data set, the improved YOLOv5 model has higher recognition accuracy than other models, improving 11.7%, 3.4%, 6.2%, 33.5%, respectively. As a result, this study provides a practical and systematic detection method for digital twin model surface during the intelligent production process, and realizes the rapid screening of the workpiece with defects.

Transient Photoinduced Pb2+ Disproportionation for Exciton Self-Trapping and Broadband Emission in Low-Dimensional Lead Halide Perovskites.

Low-dimensional lead halide perovskites with broadband emission hold great promise for single-component white-light-emitting (WLE) devices. The origin of their broadband emission has been commonly attributed to self-trapped excitons (STEs) composed of localized electronic polarization with a distorted lattice. Unfortunately, the exact electronic and structural nature of the STE species in these WLE materials remains elusive, hindering the rational design of high-efficiency WLE materials. In this study, by combining ultrafast transient absorption spectroscopy and ab initio calculations, we uncover surprisingly similar STE features in two prototypical low dimensional WLE perovskite single crystals: 1D (DMEDA)PbBr4 and 2D (EDBE)PbBr4, despite of their different dimensionalities. Photoexcited excitons rapidly localize to intrinsic STEs within ∼250 fs, contributing to the white light emission. Crucially, STEs in both systems exhibit characteristic absorption features akin to those of Pb+ and Pb3+. Further atomic level theoretical simulations confirm photoexcited electrons and holes are localized on the Pb2+ site to form Pb+- and Pb3+-like species, resembling transient photoinduced Pb2+ disproportionation. This study provides conclusive evidence on the key excited state species for exciton self-trapping and broadband emission in low dimensional lead halide WLE perovskites and paves the way for the rational design of high-efficiency WLE materials.

Regulating Crystallinity Mismatch Between Donor and Acceptor to Improve Exciton/Charge Transport in Efficient Organic Solar Cells.

Achieving a more balanced charge transport by morphological control is crucial in reducing bimolecular and trap-assisted recombination and enhancing the critical parameters for efficient organic solar cells (OSCs). Hence, a facile strategy is proposed to reduce the crystallinity difference between donor and acceptor by incorporating a novel multifunctional liquid crystal small molecule (LCSM) BDTPF4-C6 into the binary blend. BDTPF4-C6 is the first LCSM based on a tetrafluorobenzene unit and features a low liquid crystal phase transition temperature and strong self-assembly ability, conducive to regulating the active layer morphology. When BDTPF4-C6 is introduced as a guest molecule into the PM6 : Y6 binary, it exhibits better compatibility with the donor PM6 and primarily resides within the PM6 phase because of the similarity-intermiscibility principle. Moreover, systematic studies revealed that BDTPF4-C6 could be used as a seeding agent for PM6 to enhance its crystallinity, thereby forming a more balanced and favourable charge transport with suppressed charge recombination. Intriguingly, dual Förster resonance energy transfer was observed between the guest molecule and the host donor and acceptor, resulting in an improved current density. This study demonstrates a facile approach to balance the charge mobilities and offers new insights into boosting the efficiency of single-junction OSCs beyond 20 %.

Impact of Electrostatic Interaction on Vertical Morphology and Energy Loss in Efficient Pseudo-Planar Heterojunction Organic Solar Cells.

Although a suitable vertical phase separation (VPS) morphology is essential for improving charge transport efficiency, reducing charge recombination, and ultimately boosting the efficiency of organic solar cells (OSCs), there is a lack of theoretical guidance on how to achieve the ideal morphology. Herein, a relationship between the molecular structure and the VPS morphology of pseudo-planar heterojunction (PPHJ) OSCs is established by using molecular surface electrostatic potential (ESP) as a bridge. The morphological evolution mechanism is revealed by studying four binary systems with vary electrostatic potential difference (∆ESP) between donors (Ds) and acceptors (As). The findings manifest that as ∆ESP increases, the active layer is more likely to form a well-mixed phase, while a smaller ∆ESP favors VPS morphology. Interestingly, it is also observed that a larger ∆ESP leads to enhanced miscibility between Ds and As, resulting in higher non-radiative energy losses (ΔE3). Based on these discoveries, a ternary PPHJ device is meticulously designed with an appropriate ∆ESP to obtain better VPS morphology and lower ΔE3, and an impressive efficiency of 19.09% is achieved. This work demonstrates that by optimizing the ΔESP, not only the formation of VPS morphology can be controlled, but also energy losses can be reduced, paving the way to further boost OSC performance.

Experimental quantum e-commerce.

E-commerce, a type of trading that occurs at a high frequency on the internet, requires guaranteeing the integrity, authentication, and nonrepudiation of messages through long distance. As current e-commerce schemes are vulnerable to computational attacks, quantum cryptography, ensuring information-theoretic security against adversary's repudiation and forgery, provides a solution to this problem. However, quantum solutions generally have much lower performance compared to classical ones. Besides, when considering imperfect devices, the performance of quantum schemes exhibits a notable decline. Here, we demonstrate the whole e-commerce process of involving the signing of a contract and payment among three parties by proposing a quantum e-commerce scheme, which shows resistance of attacks from imperfect devices. Results show that with a maximum attenuation of 25 dB among participants, our scheme can achieve a signature rate of 0.82 times per second for an agreement size of approximately 0.428 megabit. This proposed scheme presents a promising solution for providing information-theoretic security for e-commerce.

A target-triggered fluorescence-SERS dual-signal nano-system for real-time imaging of intracellular telomerase activity.

Telomerase (TE) is a promising diagnostic and prognostic biomarker for many cancers. Quantification of TE activity in living cells is of great significance in biomedical and clinical research. Conventional fluorescence-based sensors for quantification of intracellular TE may suffer from problems of fast photobleaching and auto-fluorescence of some endogenous molecules, and hence are liable to produce false negative or positive results. To address this issue, a fluorescence-SERS dual-signal nano-system for real-time imaging of intracellular TE was designed by functionalizing a bimetallic Au@Ag nanostructure with 4-p-mercaptobenzoic acid (internal standard SERS tag) and a DNA hybrid complex consisted of a telomerase primer strand and its partially complimentary strand modified with Rhodamine 6G. The bimetallic Au@Ag nanostructure serves as an excellent SERS-enhancing and fluorescence-quenching substrate. Intracellular TE will trigger the extension of the primer strand and cause the shedding of Rhodamine 6G-modified complimentary strand from the nano-system through intramolecular DNA strand displacement, resulting in the recovery of the fluorescence of Rhodamine 6G and decrease in its SERS signal. Both the fluorescence of R6G and the ratio between the SERS signals of 4-p-mercaptobenzoic acid and Rhodamine 6G can be used for in situ imaging of intracellular TE. Experimental results showed that the proposed nano-system was featured with low background, excellent cell internalization efficiency, good biocompatibility, high sensitivity, good selectivity, and robustness to false positive results. It can be used to distinguish cancer cells from normal ones, identify different types of cancer cells, as well as perform absolute quantification of intracellular TE, which endows it with great potential in clinical diagnosis, target therapy and prognosis of cancer patients.

Inundative practice for screening siRNA management candidates against a notorious predatory beetle using olfactory silencing.

Calosoma maximoviczi, a predatory pest beetle, poses a significant threat to wild silk farm production due to its predation on wild silkworms. Given the coexistence of this species with beneficial silkworms in the farm orchards, chemical pesticides are not an ideal solution for controlling its population. In this study, we employed a comprehensive multi-target RNA interference (RNAi) approach to disrupt the olfactory perception of C. maximoviczi through independently silencing 16 odorant receptors (ORs) in the respective genders. Specifically, gene-specific siRNAs were designed to target a panel of ORs, allowing us to investigate the specific interactions between odorant receptors and ligands within this species. Our investigation led to identifying four candidate siOR groups that effectively disrupted the beetle's olfactory tracking of various odorant ligands associated with different trophic levels. Furthermore, we observed sex-specific differences in innate RNAi responses reflected by subsequent gene expression, physiological and behavioral consequences, underscoring the complexity of olfactory signaling and emphasizing the significance of considering species/sex-specific traits when implementing pest control measures. These findings advance our understanding of olfactory coding patterns in C. maximoviczi beetles and establish a foundation for future research in the field of pest management strategies.

Drynaria Naringin alleviated mechanical stress deficiency-caused bone loss deterioration via Rspo1/Lgr4-mediated Wnt/ß-catenin signalling pathway.

Osteoporosis is a metabolic condition distinguished by the degradation of bone microstructure and mechanical characteristics. Traditional Chinese medicine (TCM) has been employed in China for the treatment of various illnesses. Naringin, an ingredient found in Drynariae TCM, is known to have a significant impact on bone metabolism. For this research, we studied the precise potential effect of Drynaria Naringin on protecting against bone loss caused by stress deficiency. In this study, a tail-suspension (TS) test was performed to establish a mouse model with hind leg bone loss. Some mice received subcutaneous injections of Drynaria Naringin for 30 d. Trabecular bone microarchitecture was evaluated using micro-computed tomography analysis and bone histological analysis. Bone formation and resorption markers were quantified in blood samples from mice or in the supernatant of MC3T3-E1 cells by ELISA analysis, Western blotting, and PCR. Immunofluorescence was utilized to visualize the location of ß-catenin. Additionally, siRNA was employed to knockdown-specific genes in the cells. Our findings highlight the efficacy of Drynaria Naringin in protecting against the deterioration of bone loss and promoting bone formation and Rspo1 expression in a mouse model following the TS test. Specifically, in vitro experiments also indicated that Drynaria Naringin may promote osteogenesis through the Wnt/ß-catenin signalling pathway. Moreover, our results suggest that Drynaria Naringin upregulates the expression of Rspo1/Lgr4, leading to the promotion of osteogenesis via the Wnt/ß-catenin signalling pathway. Therefore, Drynaria Naringin holds potential as a therapeutic medication for osteoporosis. Drynaria Naringin alleviates bone loss deterioration caused by mechanical stress deficiency through the Rspo1/Lgr4-mediated Wnt/ß-catenin signalling pathway.

Investigation of crack recognition and spatio-temporal evolution pattern in coal samples damage.

Understanding the evolution mechanism of cracks helps to evaluate the behavior and performance of rock masses and provides a theoretical basis for the mechanism of crack propagation and instability. For this purpose, a rock mechanics testing system and an acoustic emission monitoring system were used to conduct acoustic emission positioning experiments on coal samples under uniaxial compression. According to clustering theory, the distribution pattern of microcracks and the dynamic evolution process of multiple cracks were studied. Subsequently, the reasons for the change in the spatio-temporal entropy (H) and fractal dimension (D) of a single crack were revealed. The research results show that microcracks present a statistical equilibrium distribution, the Gaussian distribution model is applicable to cluster crack distribution patterns, and a machine learning method can effectively identify cracks. The fractal dimension reflects the spatial characteristics of three-dimensional elliptical cracks, and low-dimensional cluster cracks are more likely to develop into macroscopic cracks. The change of H is related to the formation process of cracks, and an abnormal H (sudden increase and sudden decrease) could provide precursor information for the instability of coal samples. This research provides a new method to study crack distributions and formations and shows the competitiveness of the method in evaluating the damage state of coal.

Visible-light-induced nickel-catalyzed α-hydroxytrifluoroethylation of alkyl carboxylic acids: Access to trifluoromethyl alkyl acyloins.

A visible-light-induced nickel-catalyzed cross coupling of alkyl carboxylic acids with N-trifluoroethoxyphthalimide is described. Under purple light irradiation, an α-hydroxytrifluoroethyl radical generated from a photoactive electron donor-acceptor complex between Hantzsch ester and N-trifluoroethoxyphthalimide was subsequently engaged in a nickel-catalyzed coupling reaction with in situ-activated alkyl carboxylic acids. This convenient protocol does not require photocatalysts and metal reductants, providing a straightforward and efficient access to trifluoromethyl alkyl acyloins in good yields with broad substrate compatibility. The complex bioactive molecules were also compatible with this catalytic system to afford the corresponding products.

Effect of Water Exercise Therapy on Lower Limb Function Rehabilitation in Hemiplegic Patients with the First Stroke.

Objective: To investigate water exercise therapy's effect on lower limb function rehabilitation in patients with the first stroke. Method: 160 patients with the first stroke and lower limb dysfunction who received rehabilitation treatment in the Geriatric Hospital of Hainan, China, from May 2020 to June 2021 were randomly divided into two groups, the control group, and the hydrotherapy group. Each group comprises 80 cases in each group. The control group received conventional drug therapy and traditional rehabilitation training, while the hydrotherapy group received underwater exercise training in combination with the routine group treatment plan. The National Health Center Stroke Scale (NIHSS), the modified Rankin scale (MRS), the limb motor function score table (Fugl-Meyer assessment, FMA), Functional Walking Scale (functional ambulation category scale, FAC), Berg Balance Scale (BBS) and the modified Barthel index (MBI) were respectively used to evaluate the neurological function, lower limb motor function, walking function, balance function and daily living ability before and after treatment. Result: There was no significant difference in NIHSS, MRS, FMA, FAC, BBS, and MBI scores between the two groups before treatment (P > .05). However, after 8 weeks of treatment, there was a significant difference in FMA, FAC, BBS, and MBI scores between the two groups (P = .00035). The FMA scores in control group was 16.60 ± 4.49, while 21.45 ± 2.96 after treatment. The FAC scores in control group was 1.45 ± 0.68, while 1.95 ± 0.783 after treatment. Conclusion: Early water exercise training in hemiplegic patients with the first stroke can significantly enhance the balance ability, walking ability as well as limb coordination of patients.

Impact of Bad Ragaz ring in hot spring water on knee osteoarthritis: A prospective observational study.

To evaluate the impact of the Bad Ragaz ring method (BRRM) in hot spring water for knee osteoarthritis (KOA), this prospective study enrolled KOA patients treated at the hospital between March 2020 and December 2020. The primary outcome was the Western Ontario and McMaster Universities (WOMAC) osteoarthritis index score. A total of 60 patients were included, with 30 participants in the BRRM group and 30 patients in the non-BRRM group, respectively. The mean age was 56.4 ±â€…10.2 years (13 females), and the duration of disease was 5.0 ±â€…2.2 years in the BRRM group. The mean age was 56.0 ±â€…11.3 years (14 females), and the disease duration was 4.7 ±â€…2.1 years in the non-BRRM group. There were no differences between the 2 groups in the pain, stiffness, and function scores of the WOMAC (all P > .05) before treatment. The pre post difference in total WOMAC scores (56.57 ±â€…12.45 vs 36.81 ±â€…13.51, Cohen d = 1.52, P < .01) between the 2 groups was statistically significant. Compared with the non-BRRM group, the BRRM group showed lower scores for pain (6.5 ±â€…1.5 vs 8.1 ±â€…2.9, Cohen d = -0.69, P = .01), stiffness (2.7 ±â€…1.0 vs 5.0 ±â€…1.2, Cohen d = -1.93, P < .01), and function (14.8 ±â€…6.6 vs 26.7 ±â€…7.5, Cohen d = -1.68, P < .01) after treatment. In conclusion, the BRRM might improve the pain and function of patients with KOA.

Passivating SnO2/perovskite interface via guanide hydrochloride toward efficient and stable n-i-p perovskite solar cells.

Nonradiation recombination of interfacial carriers is a key factor hindering the improvement of efficiency and stability of perovskite solar cells (PSCs). Here, we report an effective electron transport layer/perovskite interface regulation strategy. By introducing the multifunctional molecule guanidine hydrochloride (GCl) on the surface of SnO2, we can enhance the electron extraction between SnO2 and perovskite and promote the growth of high-quality perovskite films. GCl is anchored on the surface of SnO2 and interacts with undercoordinated ions in perovskite. The experimental results show that GCl has interaction with both SnO2 and perovskite layer, and a "bridge" connection is formed between the two layers. This strategy not only passivates the SnO2/perovskite interface defects, improves the perovskite crystallization quality, but also helps to reduce the interface charge accumulation. More importantly, the PCE of GCl passivated device reached 21.63 %, which was much better than that of control device (19.56 %). In the air environment, after 30 days at room temperature, the GCl modified unpackaged device maintained 83 % of its initial efficiency. Therefore, interface modification with GCl is an effective strategy to improve the interface state, improve the crystallization quality and obtain high-performance PSCs.

Asynchronous measurement-device-independent quantum key distribution with hybrid source.

The linear constraint of secret key rate capacity is overcome by the twin-field quantum key distribution (QKD). However, the complex phase-locking and phase-tracking technique requirements throttle the real-life applications of the twin-field protocol. The asynchronous measurement-device-independent (AMDI) QKD, also called the mode-pairing QKD, protocol can relax the technical requirements and keep the similar performance of the twin-field protocol. Here, we propose an AMDI-QKD protocol with a nonclassical light source by changing the phase-randomized weak coherent state to a phase-randomized coherent-state superposition in the signal state time window. Simulation results show that our proposed hybrid source protocol significantly enhances the key rate of the AMDI-QKD protocol, while exhibiting robustness to imperfect modulation of nonclassical light sources.