ABSTRACT
The transmission spectrum of a narrow-band interference filter is crucial and highly influenced by factors such as the temperature and angle, thus requiring precise and online measurements. The traditional method of measuring the transmission spectrum of an interference filter involves the use of a spectrometer, but the accuracy of this method is limited. Moreover, placing a narrow-band interference filter inside a spectrometer hinders real-time online measurements. To address this issue, there is demand for high-precision online spectral testing methods. In response to this demand, we propose and experimentally validate a fine spectral characterization method for narrow-band interference filters. This method uses a narrow-linewidth tunable laser, achieving a spectral resolution in the MHz range for online testing. Two types of narrow-band interference filters were tested using the constructed laser spectroscopy experimental system, obtaining a transmission spectrum with a spectral resolution of 318 MHz. In comparison to spectrometer-based methods, our proposed method demonstrates higher spectral accuracy, enables online measurements, and provides more accurate measurements for special spectral interference filters. This approach has significant application value and promising development prospects.
ABSTRACT
A dual-wavelength tunable lidar system that simultaneously detects the Ca and Ca+ layers has been established in Yanqing Station (40.41°N, 116.01°E). The lidar system implements a pulsed Nd:YAG laser that simultaneously pumps two dye lasers, which reduces the hardware configuration of the lidar system. The two dye lasers use infrared laser dyes with high conversion efficiency suitable for long-term observation. The resonance wavelengths of Ca and Ca+ are generated by frequency doubling of the two infrared laser beams. We compared the dual-wavelength tunable lidar system to previous dye-based systems and performed experiments to determine resonance frequencies to within 0.4 pm and to test the dual optical fiber receiving system and found it does not cause cross talk. Three nights of preliminary simultaneous observations of Ca and Ca+ layers are reported; the diversity of these observations begs for more systematic observations and challenging interpretations in terms of Ca processes in the ionosphere and illustrates the effectiveness of this system for aeronomy and space physics studies.
ABSTRACT
Due to the severe interference from strong solar background light on the received signal, daytime ground-based lidar observation of the sodium (Na) layer is challenging. In this paper, a Na lidar permitting full-diurnal-cycle observation of the metal Na layer over Beijing, China (40.5°N, 116°E) was reported. In order to suppress the skylight background during daytime effectively with less signal losses, a dual-channel Faraday filtering unit was implemented in the lidar receiver. Based on the diurnal Na lidar system, a good number of continuous observational results that lasted more than 120 h with good signal-to-noise ratio were obtained, demonstrating its reliability. Considerable variations within the Na layer during the day were revealed, especially on the layer top and bottom side. In particular, strong sporadic Na layer (Nas) events that occurred during the daytime of 3 consecutive days were also captured with complete evolution process. These observational results showed the advantages of the diurnal Na lidar for investigating the metal layer photochemistry and dynamics in the mesosphere and lower thermosphere region. Na layer observations over the whole diurnal cycle not only benefit the improvements of current theoretical models, but also can allow for a specialized analysis of Nas that occur in the daytime and provide valuable observational support for investigating the rapid production and disappearance mechanisms of Na atoms.
ABSTRACT
A narrowband sodium lidar for measuring mesospheric temperature and wind has been established at YangBaJing, Tibet (90°E, 30°N, 4300 m a.s.l), China. The system is designed and optimized based on important upgrades using new technology. In the lidar system, single-mode 589 nm seed laser is produced by frequency doubling of 1178 nm diode laser with a periodically poled lithium niobate (PPLN) waveguide. The output power of 589 nm continuous-wave laser is up to 1.5 W with the help of a seed-injected Raman fiber amplifier. Furthermore, fast three-frequency switcher is designed with a couple of fiber magneto optical switches (FMOS) for measuring wind and temperature, simultaneously, which greatly reduces the system maintenance. These improvements greatly simplify the lidar system, thus, achieve robust operation with minimum maintenance requirements.
ABSTRACT
A solid-state sodium (Na) Doppler lidar developed at YanQing Station, Beijing, China (40°N, 116°E) aiming to simultaneous wind and temperature measurement of mesopause region was reported. The 589 nm pulse laser was produced by two injection seeded 1064 nm and 1319 nm Nd:YAG pulse lasers using the sum-frequency generation (SFG) technique. A fiber amplifier is implemented to boost the seed power at 1064 nm, enabling a robust, all-fiber-coupled design for seeding laser unit, absolute laser frequency locking, and cyclic three-frequency switching necessary for simultaneous temperature and wind measurements. The all-fiber-coupled injection seeding configuration together with the solid-state Nd:YAG lasers make the Na Doppler lidar more compact and greatly reduce the system maintenance, which is conducive to transportable and unattended operation. A preliminary observational result obtained with this solid-state sodium Doppler lidar was also reported in this paper.
ABSTRACT
For high power-aperture lidar sounding of wide atmospheric dynamic ranges, as in middle-upper atmospheric probing, photomultiplier tubes' (PMT) pulse pile-up effects and signal-induced noise (SIN) complicates the extraction of information from lidar return signal, especially from metal layers' fluorescence signal. Pursuit for sophisticated description of metal layers' characteristics at far range (80~130km) with one PMT of high quantum efficiency (QE) and good SNR, contradicts the requirements for signals of wide linear dynamic range (i.e. from approximate 10(2) to 10(8) counts/s). In this article, Substantial improvements on experimental simulation of Lidar signals affected by PMT are reported to evaluate the PMTs' distortions in our High Power-Aperture Sodium LIDAR system. A new method for pile-up calibration is proposed by taking into account PMT and High Speed Data Acquisition Card as an Integrated Black-Box, as well as a new experimental method for identifying and removing SIN from the raw Lidar signals. Contradiction between the limited linear dynamic range of raw signal (55~80km) and requirements for wider acceptable linearity has been effectively solved, without complicating the current lidar system. Validity of these methods was demonstrated by applying calibrated data to retrieve atmospheric parameters (i.e. atmospheric density, temperature and sodium absolutely number density), in comparison with measurements of TIMED satellite and atmosphere model. Good agreements are obtained between results derived from calibrated signal and reference measurements where differences of atmosphere density, temperature are less than 5% in the stratosphere and less than 10K from 30km to mesosphere, respectively. Additionally, approximate 30% changes are shown in sodium concentration at its peak value. By means of the proposed methods to revert the true signal independent of detectors, authors approach a new balance between maintaining the linearity of adequate signal (20-110km) and guaranteeing good SNR (i.e. 10(4):1 around 90km) without debasing QE, in one single detecting channel. For the first time, PMT in photon-counting mode is independently applied to subtract reliable information of atmospheric parameters with wide acceptable linearity over an altitude range from stratosphere up to lower thermosphere (20-110km).
Subject(s)
Algorithms , Atmosphere/analysis , Atmosphere/chemistry , Lasers , Photometry/instrumentation , Radar/instrumentation , Refractometry/instrumentation , Calibration , Equipment Design , Equipment Failure AnalysisABSTRACT
We report a flat spectral Faraday anomalous dispersion optical filter (FS-FADOF) for sodium lidar. The physical and technical considerations for obtaining a FS-FADOF with a 3.5 GHz flat spectral transmission function are presented. It was found that the effective transmission of this filter was much higher (>94%) and more uniform than that of the ultranarrowband FADOF, and therefore were less sensitive to laser-frequency drift. Thus, the FS-FADOF can improve lidar efficiency and precision.
ABSTRACT
The time-resolved spectra of the air-breakdown plasma produced by the 1.06 microns beam of a Nd:YAG laser were investigated by using the time-delayed spectra and the spectral line evolution methods. The time evolutions of the short wavelength band and long wavelength band of the continuous spectra of the air-breakdown plasma have been measured. The result shows that the decay rates of both bands are slowing down 0.5 microsecond after the excitation of the plasma, and the attachment and the detachment of free electrons by O2 in the plasma could be the reason for this behavior. The results of the time-resolved measurements of the line spectra show that most of the line spectra have the evolution time longer than their lifetimes, and the evolutions of some line spectra take a fashion of "decay-grow-decay". We consider these evolution behaviors of the line spectra to be related to various recombination processes and the energy transfer processes of the decaying plasma.
