ABSTRACT
Optical properties of the FePt-C nanocomposite thin film that was synthesized by sputtering with MgO/NiTa underlayer on glass substrate have been determined by an approach combining spectroscopic ellipsometry and transmission over the wavelength range of 380 - 1700 nm. It was observed that the refractive index is larger than the extinction coefficient, indicating that free electron absorption is not the dominant optical transition in the FePt-C thin film. Compared with FePt thin film, the FePt-C thin film has smaller optical constants, which lead to better optical performance including smaller optical spot on recording media and higher transducer efficiency for heat assisted magnetic recording.
Subject(s)
Carbon/chemistry , Information Storage and Retrieval/methods , Iron/chemistry , Membranes, Artificial , Optical Devices , Platinum/chemistry , Refractometry/instrumentation , Carbon/radiation effects , Equipment Design , Equipment Failure Analysis , Hot Temperature , Iron/radiation effects , Magnetic Fields , Platinum/radiation effectsABSTRACT
In this report, the effect of simultaneously adding two dopants (C and Ta2O5) in FePt was investigated. (Fe55Pt45)79C21-(x vol%) Ta2O5 films (where x = 0% to 20%) were prepared using both low and high power magnetron sputtering on MgO (2 nm)/CrRu (30 nm) underlayers with in-situ heating at 350 degrees C. Films deposited at low power showed a decrease in exchange coupling with increasing Ta2O5 content. Out-of-plane coercivity of 7.2 kOe was observed even with up to 20 vol% Ta2O5. X-Ray diffraction spectra showed presence of FePt(001) texture for all compositions of Ta2O5 ranging from 0 to 20 vol% suggesting that the perpendicular anisotropy was maintained even with up to 20 vol% of dopant content. Films deposited at high power showed a different behavior with an initial increase in out-of-plane coercivity to 8.2 kOe and a reduction in exchange coupling with loop slope parameter (alpha) approaching a fully decoupled value of 1. Further increase in doping content led to deterioration in the out-of-plane coercivity, as well as an increase in the exchange coupling.
Subject(s)
Carbon/chemistry , Iron/chemistry , Magnetics/instrumentation , Nanostructures/chemistry , Oxides/chemistry , Platinum/chemistry , Tantalum/chemistry , Equipment Design , Equipment Failure Analysis , Nanostructures/ultrastructure , Particle SizeABSTRACT
FeTaC magnetic soft underlayer under elevated temperature process conditions for L1(0) FePt based perpendicular recording media has been investigated. After annealing FeTaC for 40 min at 350 degrees C, saturation moment increases to 750 emu/cm3 and, coercivity and remanent moment reduce to 2.3 Oe and 166 emu/cm3 respectively. The microstructure of FeTaC annealed at 350 degrees C for 40 min composes of Fe nanocrystals with random orientations immersed in an amorphous matrix. FeTaC surface roughness due to elevated temperature process is reduced by 100 W RF plasma etching and CrRu with (200) orientation is developed. It is found that changing elemental composition due to C diffusion into the CrRu layer and RF preferential etching over Fe, Ta and C has the influence on the magnetic properties of FeTaC.
