Box-Behnken design optimization of xylanase and cellulase production by Aspergillus fumigatus on Stipa tenacissima biomass.

Optimization of xylanase and cellulase production by a newly isolated Aspergillus fumigatus strain grown on Stipa tenacissima (alfa grass) biomass without pretreatment was carried out using a Box-Behnken design. First, the polysaccharides of dried and ground alfa grass were characterized using chemical methods (strong and diluted acid). The effect of substrate particle size on xylanase and carboxymethylcellulase (CMCase) production by the selected and identified strain was then investigated. Thereafter, experiments were statistically planned with a Box-Behnken design to optimize initial pH, cultivation temperature, moisture content, and incubation period using alfa as sole carbon source. The effect of these parameters on the two enzyme production was evaluated using the response surface method. Analysis of variance was also carried out, and production of the enzymes was expressed using a mathematical equation depending on the influencing factors. The effects of individual, interaction, and square terms on production of both enzymes were represented using the nonlinear regression equations with significant R2 and P-values. Xylanase and CMCase production levels were enhanced by 25% and 27%, respectively. Thus, this study demonstrated for the first time the potential of alfa as a raw material to produce enzymes without any pretreatment. A set of parameter combinations was found to be effective for the production of xylanase and CMCase by A. fumigatus in an alfa-based solid-state fermentation.

Production of a halotolerant endo-1,4-ß-glucanase by a newly isolated Bacillus velezensis H1 on olive mill wastes without pretreatment: purification and characterization of the enzyme.

Facing the critical issue of high production costs for cellulase, numerous studies have focused on improving the efficiency of cellulase production by potential cellulolytic microorganisms using agricultural wastes as substrates, extremophilic cellulases, in particular, are crucial in the biorefinery process because they can maintain activity under harsh environmental conditions. This study aims to investigate the ability of a potential carboxymethylcellulose-hydrolyzing bacterial strain H1, isolated from an Algerian saline soil and identified as Bacillus velezensis, to use untreated olive mill wastes as a substrate for the production of an endo-1,4-ß-glucanase. The enzyme was purified 44.9 fold using only two steps: ultrafiltration concentration and ion exchange chromatography, with final recovery of 80%. Its molecular mass was estimated to be 26 kDa by SDS-PAGE. Enzyme identification by LC-MS analysis showed 40% identity with an endo-1,3-1,4-ß-glucanase of GH-16 family. The highest enzymatic activity was significantly measured on barley ß-glucan (604.5 U/mL) followed by lichenan and carboxymethylcellulose as substrates, confirming that the studied enzyme is an endo-1,4-ß-glucanase. Optimal enzymatic activity was at pH 6.0-6.5 and at 60-65 °C. It was fairly thermotolerant, retaining 76.9% of the activity at 70 °C, and halotolerant, retaining 70% of its activity in the presence of 4 M NaCl. The enzyme had a Vmax of 625 U/min/mL and a high affinity with barley ß-glucan resulting a Km of 0.69 mg/mL. It also showed a significant ability to release cello-oligosaccharides. Based on such data, the H1 endo-1,4-ß-glucanase may have significant commercial values for industry, argo-waste treatment, and other biotechnological applications.

Optimization of thermostable proteases production under agro-wastes solid-state fermentation by a new thermophilic Mycothermus thermophilus isolated from a hydrothermal spring Hammam Debagh, Algeria.

The present work investigates for the first time the presence and isolation of the thermophilic fungi from hydrothermal spring situated at the locality of Guelma, in the Northeast of Algeria. The production of the thermostable proteases and the optimization of culture conditions under agro-wastes solid-state fermentation to achieve optimal production capacity were explored. A statistical experimental approach consisting of two designs was used to determine the optimum culture conditions and to attain the greatest enzyme production. Besides, different agricultural wastes were initially evaluated as a substrate, whereby wheat bran was selected for enzyme production by the isolate under solid-state conditions. The isolate thermophilic fungi were identified as Mycothermus thermophilus by sequencing the ITS region of the rDNA (NCBI Accession No: MK770356.1). Among the various screened variables: the temperature, the inoculum size, and the moisture were proved to have the most significant effects on protease activity. Employing two-level fractional Plackett-Burman and a Box-Behnken designs statistical approach helped in identifying optimum values of screened factors and their interactions. The analysis showed up 6.17-fold improvement in the production of proteases (~1187.03 U/mL) was achieved under the optimal conditions of moisture content 47%, inoculum 5 × 105 spores/g, and temperature at 42 °C. These significant findings highlight the importance of the statistical design in isolation of Mycothermus thermophilus species from a specific location as well as identifying the optimal culture conditions for maximum yield.

New approach in the characterization of bioactive compounds isolated from Calycotome spinosa (L.) Link leaves by the use of negative electrospray ionization LITMSn, LC-ESI-MS/MS, as well as NMR analysis.

Two novel compounds were isolated for the first time from Calycotome spinosa (L.) Link, an alkaloid 5-Hydroxy-1H-indole (4) and a cyclitol D-pinitol (5), together with the three well-known flavonoids; Chrysin-7-O-(ß-D-glucopyranoside) (1), Chrysin-7-O-ß-D-(6″-acetyl)glycopyranoside (2) and Apigenin-7-O-ß-D-glycopyranoside (3). The chemical structures of the isolated compounds were elucidated by spectroscopic data and mass spectrometric analyses; including a fresh approach 1D-NMR, 2D-NMR with LC-ESI-MS/MS. In this study, the new compound (4) that has been obtained from the leaves MeOH extract presented the best radical scavenging activity (DPPH) (IC50 < 10 µg/mL) compared to the standard butylated hydroxytoluene (BHT, IC50 = 34.73 ± 0.23 µg/mL) and showed the highest total antioxidant capacity (TAC = 985.54 ± 0.13 mg AAE/g extract) in contrast to ascorbic acid (TAC = 905.95 ± 0.07 mg AAE/g extract). Furthermore, the strongest reducing power (EC50 = 344.82 ± 0.02 µg/mL), as well as the remarkable scavenging potential by ABTS assay (IC50 = 7.8 ± 0.43 µg/mL), were exhibited by the same composite (4). Followed by the methanol crude extract and the compound (3) that also showed a potent antioxidant (DPPH; IC50 = 41.04 ± 0.15 and 47.36 ± 0.21 µg/mL, TAC; 671.02 ± 0.21 and 608.67 ± 0.34 mg AAE/g extract, FRAP; EC50 = 763.73 ± 0.32 and 814.61 ± 0.31 µg/mL, ABTS; IC50 = 19.18 ± 0.06 and 63.72 ± 0.64 µg/mL, respectively), but less than the previous samples. On the opposite side, compound (5) had the lowest activity, in which its values were less interesting to determine. Moreover, compound (4) has equally exerted an attractive antibacterial activity against Staphylococcus aureus (ATTC-25923), Pseudomonas aeruginosa (ATTC- 27853) and Salmonella abony (NCTC 6017), as measured by the disc diffusion assay, with inhibition zones of 16 ± 0.5, 9.83 ± 0.29 and 8 ± 0.28 mm, in that order. To the best of our knowledge, 5-Hydroxy-1H-indole was isolated from plants for the second time in our current work. Thus, the obtained results from this investigation propose that the leaves of C. spinosa are a rich natural source for value molecules as potential antioxidants and antimicrobial agents for best human health.

Optimization of Baker's Yeast Production on Date Extract Using Response Surface Methodology (RSM).

This work aims to study the production of the biomass of S. cerevisiae on an optimized medium using date extract as the only carbon source in order to obtain a good yield of the biomass. The biomass production was carried out according to the central composite experimental design (CCD) as a response surface methodology using Minitab 16 software. Indeed, under optimal biomass production conditions, temperature (32.9 °C), pH (5.35) and the total reducing sugar extracted from dates (70.93 g/L), S. cerevisiae produced 40 g/L of their biomass in an Erlenmeyer after only 16 h of fermentation. The kinetic performance of the S. cerevisiae strain was investigated with three unstructured models i.e., Monod, Verhulst, and Tessier. The conformity of the experimental data fitted showed a good consistency with Monod and Tessier models with R² = 0.945 and 0.979, respectively. An excellent adequacy was noted in the case of the Verhulst model (R² = 0.981). The values of kinetic parameters (Ks, Xm, µm, p and q) calculated by the Excel software, confirmed that Monod and Verhulst were suitable models, in contrast, the Tessier model was inappropriately fitted with the experimental data due to the illogical value of Ks (-9.434). The profiles prediction of the biomass production with the Verhulst model, and that of the substrate consumption using Leudeking Piret model over time, demonstrated a good agreement between the simulation models and the experimental data.