Studying the small extracellular vesicle capture efficiency of magnetic beads coated with tannic acid.

The isolation of small extracellular vesicles (sEVs), including those secreted by pathological cells, with high efficiency and purity is highly demanded for research studies and practical applications. Conventional sEV isolation methods suffer from low yield, presence of contaminants, long-term operation and high costs. Bead-assisted platforms are considered to be effective for trapping sEVs with high recovery yield and sufficient purity for further molecular profiling. In this study, magnetically responsive beads made of calcium carbonate (CaCO3) particles impregnated with iron oxide (Fe3O4) nanoparticles are fabricated using a freezing-induced loading (FIL) method. The developed magnetic beads demonstrate sufficient magnetization and can be collected by a permanent magnet, ensuring their rapid and gentle capture from an aqueous solution. The tannic acid on the surface of magnetic beads is formed by a layer-by-layer (LbL) method and is used to induce coupling of sEVs with the surface of magnetic beads. These tannic acid coated magnetic beads (TAMB) were applied to capture sEVs derived from MCF7 and HCT116 cell lines. Quantitative data derived from nanoparticle tracking analysis (NTA) and BCA methods revealed the capture efficiency and recovery yield of about 60%. High-resolution transmission electron microscopy (HRTEM) imaging of sEVs on the surface of TAMBs indicated their structural integrity. Compared with the size exclusion chromatography (SEC) method, the proposed approach demonstrated comparable efficiency in terms of recovery yield and purity, while offering a relatively short operation time. These results highlight the high potential of the TAMB approach for the enrichment of sEVs from biological fluids, such as cell culture media.

Filtration-based technologies for isolation, purification and analysis of extracellular vesicles.

The involvement of extracellular vesicles (EVs) in cellular communication with multifactorial and multifaceted biological activity has generated significant interest, highlighting their potential diagnostic and therapeutic applications. EVs are found in nearly all biological fluids creating a broad spectrum of where potential disease markers can be found for liquid biopsy development and what subtypes can be used for treatment of diseases. Complexity of biological fluids has generated a variety of different approaches for EV isolation and identification that may in one way or another be most optimal for research studies or clinical use. Each approach has its own advantages and disadvantages, significance of which can be evaluated depending on the end goal of the study. One of the methods is based on filtration which has received attention in the past years due its versatility, low cost and other advantages. Introduction of different approaches for EV capture and analysis that are based on filtration gave rise to new subcategories of filtration techniques which are presented in this overview. Miniaturization and combination of filtration-based approaches with microfluidics is also highlighted due its future prospects in healthcare, especially point-of-need technologies.

Engineered multicompartment vesicosomes for selective uptake by living cells.

Small extracellular vesicles (sEVs) have attracted tremendous interest in recent years due to their exceptional properties for therapeutic and diagnostic applications. Although much research was focused on the quantity and content of sEVs, less efforts have been put into discovering the interaction between sEVs and cells. Here we engineered multicompartment particles, termed vesicosomes, by deposition of sEVs derived from MCF7, CHO cells and human plasma onto the surface of polyelectrolyte (PE)-coated silica (SiO2) microparticles. Uptake of the PE-coated SiO2 microparticles by parent cells was significantly enhanced by coating them with sEVs, compared to PE-coated SiO2 microparticles independent of the terminated polyelectrolyte layer. This study highlights the emerging role of sEVs membrane receptors in the sEV-cells interaction and demonstrates the potential application of sEV-like multicompartment particles as therapeutic carriers.

Asymmetric depth-filtration: A versatile and scalable method for high-yield isolation of extracellular vesicles with low contamination.

We developed a novel asymmetric depth filtration (DF) approach to isolate extracellular vesicles (EVs) from biological fluids that outperforms ultracentrifugation and size-exclusion chromatography in purity and yield of isolated EVs. By these metrics, a single-step DF matches or exceeds the performance of multistep protocols with dedicated purification procedures in the isolation of plasma EVs. We demonstrate the selective transit and capture of biological nanoparticles in asymmetric pores by size and elasticity, low surface binding to the filtration medium, and the ability to cleanse EVs held by the filter before their recovery with the reversed flow all contribute to the achieved purity and yield of preparations. We further demonstrate the method's versatility by applying it to isolate EVs from different biofluids (plasma, urine, and cell culture growth medium). The DF workflow is simple, fast, and inexpensive. Only standard laboratory equipment is required for its implementation, making DF suitable for low-resource and point-of-use locations. The method may be used for EV isolation from small biological samples in diagnostic and treatment guidance applications. It can also be scaled up to harvest therapeutic EVs from large volumes of cell culture medium.

Hybrid (Bovine Serum Albumin)/Poly(N-vinyl-2-pyrrolidone-co-acrylic acid)-Shelled Microbubbles as Advanced Ultrasound Contrast Agents.

Microbubbles are routinely used ultrasound contrast agents in the clinic. While a soft protein shell is commercially preferable for imaging purposes, a rigid polymer shell demonstrates prolonged agent stability. Hence, combining polymers and proteins in one shell composition can advance microbubble properties. We formulated the hybrid "protein-copolymer" microbubble shell with a complex of bovine serum albumin and an amphiphilic copolymer of N-vinyl-2-pyrrolidone and acrylic acid. The resulting microbubbles demonstrated advanced physicochemical and acoustic properties, preserving in vitro biocompatibility. Adjusting the mass ratio between protein and copolymer allowed fine tuning of the microbubble properties of concentration (by two orders, up to 1010 MBs/mL), mean size (from 0.8 to 5 µm), and shell thickness (from 28 to 50 nm). In addition, the minimum air-liquid surface tension for the "protein-copolymer" solution enabled the highest bubble concentration. At the same time, a higher copolymer amount in the bubble shell increased the bubble size and tuned duration and intensity of the contrast during an ultrasound procedure. Demonstrated results exemplify the potential of the hybrid "protein-polymer" microbubble shell, allowing tailoring of microbubble properties for image-guided applications, combining advances of each material involved in the formulation.

Quantification of Desiccated Extracellular Vesicles by Quartz Crystal Microbalance.

Extracellular vesicle (EV) quantification is a procedure through which the biomedical potential of EVs can be used and their biological function can be understood. The number of EVs isolated from cell culture media depends on the cell status and is especially important in studies on cell-to-cell signaling, disease modeling, drug development, etc. Currently, the methods that can be used to quantify isolated EVs are sparse, and each have limitations. In this report, we introduce the application of a quartz crystal microbalance (QCM) as a biosensor for quantifying EVs in a small drop of volatile solvent after it evaporates and leaves desiccated EVs on the surface of the quartz crystal. The shifts in the crystal's resonant frequency were found to obey Sauerbrey's relation for EV quantities up to 6 × 107, and it was determined that the biosensors could resolve samples that differ by at least 2.7 × 105 EVs. A ring-shaped pattern enriched in EVs after the samples had dried on the quartz crystal is also reported and discussed. QCM technology is highly sensitive and only requires small sample volumes and is significantly less costly compared with the approaches that are currently used for EV quantification.

Effect of Surface Modification of Multifunctional Nanocomposite Drug Delivery Carriers with DARPin on Their Biodistribution In Vitro and In Vivo.

We present a targeted drug delivery system for therapy and diagnostics that is based on a combination of contrasting, cytotoxic, and cancer-cell-targeting properties of multifunctional carriers. The system uses multilayered polymer microcapsules loaded with magnetite and doxorubicin. Loading of magnetite nanoparticles into the polymer shell by freezing-induced loading (FIL) allowed the loading efficiency to be increased 5-fold, compared with the widely used layer-by-layer (LBL) assembly. FIL also improved the photoacoustic signal and particle mobility in a magnetic field gradient, a result unachievable by the LBL alone. For targeted delivery of the carriers to cancer cells, the carrier surface was modified with a designed ankyrin repeat protein (DARPin) directed toward the epithelial cell adhesion molecule (EpCAM). Flow cytometry measurements showed that the DARPin-coated capsules specifically interacted with the surface of EpCAM-overexpressing human cancer cells such as MCF7. In vivo and ex vivo biodistribution studies in FvB mice showed that the carrier surface modification with DARPin changed the biodistribution of the capsules toward epithelial cells. In particular, the capsules accumulated substantially in the lungs─a result that can be effectively used in targeted lung cancer therapy. The results of this work may aid in the further development of the "magic bullet" concept and may bring the quality of personalized medicine to another level.

Dynamic surface tension probe for measuring the concentration of extracellular vesicles.

The concentration of extracellular vesicles (EVs) is an essential attribute of biofluids and EV preparations. EV concentration in body fluids was correlated with health status. The abundance of EV secreted by cultured cells into growth medium is vital in signaling studies, tissue and disease models, and biomanufacturing of acellular therapeutic secretome. A limited number of physical principles sensitive to EV concertation have been discovered so far. Particle-by-particle counting methods enumerate individual particles scattering light, modulating the Coulter current, or appearing in EM images. The available ensemble techniques in current use rely on the concentration-dependent signal intensity, as in the case of ELISA. In this study, we propose for the first-time the ensemble-based characterization of EV concentration by dynamic surface tension (DST) probe and demonstrate its implementation. We show that DST measurements agree with the widely used NTA measurements of EV concertation. The proposed method is low-cost and requires only basic laboratory equipment for implementation.

Optoacoustic/Fluorescent/Acoustic Imaging Probe Based on Air-Filled Bubbles Functionalized with Gold Nanorods and Fluorescein Isothiocyanate.

Liquid/surfactant/gas interfaces are promising objects for nanoengineered multimodal contrasts, which can be used for biomedical imaging in preclinical and clinical applications. Microbubbles with the gaseous core and shell made of lipids/proteins have already acted as ultrasound (US) contrast agents for angiography. In the present work, microbubbles with a shell composed of Span 60 and Tween 80 surfactants functionalized with fluorescein isothiocyanate and gold nanorods to achieve a multimodal combination of US, fluorescence, and optoacoustic imaging are described. Optimal conditions for microbubble generation by studying the surface tension of the initial solutions and analyzing the size, stability, and charge of the resulting bubbles were found. By controlling and modifying bubbles' surface properties, an increase in stability and storage time can be achieved. The functionalization of bubbles with gold nanoparticles and a dye by using an optimally selected sonication protocol was performed. The biomedical application's potential in imaging modalities of functionalized microbubbles using a medical US device with a frequency of 50 MHz, fluorescence tomography, and raster-scanning optoacoustic mesoscopy measurements was evaluated. The obtained results are important for optimum stabilization and functionalization of gas/liquid interfaces and the following applications in the multimodal biomedical imaging.

Air-Filled Bubbles Stabilized by Gold Nanoparticle/Photodynamic Dye Hybrid Structures for Theranostics.

Microbubbles have already reached clinical practice as ultrasound contrast agents for angiography. However, modification of the bubbles' shell is needed to produce probes for ultrasound and multimodal (fluorescence/photoacoustic) imaging methods in combination with theranostics (diagnostics and therapeutics). In the present work, hybrid structures based on microbubbles with an air core and a shell composed of bovine serum albumin, albumin-coated gold nanoparticles, and clinically available photodynamic dyes (zinc phthalocyanine, indocyanine green) were shown to achieve multimodal imaging for potential applications in photodynamic therapy. Microbubbles with an average size of 1.5 ± 0.3 µm and concentration up to 1.2 × 109 microbubbles/mL were obtained and characterized. The introduction of the dye into the system reduced the solution's surface tension, leading to an increase in the concentration and stability of bubbles. The combination of gold nanoparticles and photodynamic dyes' influence on the fluorescent signal and probes' stability is described. The potential use of the obtained probes in biomedical applications was evaluated using fluorescence tomography, raster-scanning optoacoustic microscopy and ultrasound response measurements using a medical ultrasound device at the frequency of 33 MHz. The results demonstrate the impact of microbubbles' stabilization using gold nanoparticle/photodynamic dye hybrid structures to achieve probe applications in theranostics.

Multifunctional nanostructured drug delivery carriers for cancer therapy: Multimodal imaging and ultrasound-induced drug release.

Development of multimodal systems for therapy and diagnosis of neoplastic diseases is an unmet need in oncology. The possibility of simultaneous diagnostics, monitoring, and therapy of various diseases allows expanding the applicability of modern systems for drug delivery. We have developed hybrid particles based on biocompatible polymers containing magnetic nanoparticles (MNPs), photoacoustic (MNPs), fluorescent (Cy5 or Cy7 dyes), and therapeutic components (doxorubicin). To achieve high loading efficiency of MNP and Dox to nanostructured carriers, we utilized a novel freezing-induced loading technique. To reduce the systemic toxicity of antitumor drugs and increase their therapeutic efficacy, we can use targeted delivery followed by the remote control of drug release using high intensity-focused ultrasound (HIFU). Loading of MNPs allowed performing magnetic targeting of the carriers and enhanced optoacoustic signal after controlled destruction of the shell and release of therapeutics as well as MRI imaging. The raster scanning optoacoustic mesoscopy (PA, RSOM), MRI, and fluorescent tomography (FT) confirmed the ultrasound-induced release of doxorubicin from capsules: in vitro (in tubes and pieces of meat) and in vivo (after delivery to the liver). Disruption of capsules results in a significant increase of doxorubicin and Cy7 fluorescence initially quenched by magnetite nanoparticles that can be used for real-time monitoring of drug release in vivo. In addition, we explicitly studied cytotoxicity, intracellular localization, and biodistribution of these particles. Elaborated drug delivery carriers have a good perspective for simultaneous imaging and focal therapy of different cancer types, including liver cancer.

Imaging of Extracellular Vesicles by Atomic Force Microscopy.

Exosomes and other extracellular vesicles (EVs) are molecular complexes consisting of a lipid membrane vesicle, its surface decoration by membrane proteins and other molecules, and diverse luminal content inherited from a parent cell, which includes RNAs, proteins, and DNAs. The characterization of the hydrodynamic sizes of EVs, which depends on the size of the vesicle and its coronal layer formed by surface decorations, has become routine. For exosomes, the smallest of EVs, the relative difference between the hydrodynamic and vesicles sizes is significant. The characterization of vesicles sizes by the cryogenic transmission electron microscopy (cryo-TEM) imaging, a gold standard technique, remains a challenge due to the cost of the instrument, the expertise required to perform the sample preparation, imaging and data analysis, and a small number of particles often observed in images. A widely available and accessible alternative is the atomic force microscopy (AFM), which can produce versatile data on three-dimensional geometry, size, and other biophysical properties of extracellular vesicles. The developed protocol guides the users in utilizing this analytical tool and outlines the workflow for the analysis of EVs by the AFM, which includes the sample preparation for imaging EVs in hydrated or desiccated form, the electrostatic immobilization of vesicles on a substrate, data acquisition, its analysis, and interpretation. The representative results demonstrate that the fixation of EVs on the modified mica surface is predictable, customizable, and allows the user to obtain sizing results for a large number of vesicles. The vesicle sizing based on the AFM data was found to be consistent with the cryo-TEM imaging.

Membrane proteins significantly restrict exosome mobility.

Exosomes are membrane nanovesicles implicated in cell-to-cell signaling in which they transfer their molecular cargo from the parent to the recipient cells. This role essentially depends on the exosomes' small size, which is the prerequisite for their rapid migration through the crowded extracellular matrix and into and out of circulation. Here we report much lower exosome mobility than expected from the size of their vesicles, implicate membrane proteins in a substantially impeded rate of migration, and suggest an approach to quantifying the impact. The broadly distributed excess hydrodynamic resistance provided by surface proteins produces a highly heterogeneous and microenvironment-dependent hindrance to exosome mobility. The implications of the findings on exosome-mediated signaling are discussed.

Size and shape characterization of hydrated and desiccated exosomes.

Exosomes are stable nanovesicles secreted by cells into the circulation. Their reported sizes differ substantially, which likely reflects the difference in the isolation techniques used, the cells that secreted them, and the methods used in their characterization. We analyzed the influence of the last factor on the measured sizes and shapes of hydrated and desiccated exosomes isolated from the serum of a pancreatic cancer patient and a healthy control. We found that hydrated exosomes are close-to-spherical nanoparticles with a hydrodynamic radius that is substantially larger than the geometric size. For desiccated exosomes, we found that the desiccated shape and sizing are influenced by the manner in which drying occurred. Isotropic desiccation in aerosol preserves the near-spherical shape of the exosomes, whereas drying on a surface likely distorts their shapes and influences the sizing results obtained by techniques that require surface fixation prior to analysis.

Surface tension of water in the presence of perfluorocarbon vapors.

Fluorocarbons are highly hydrophobic, biocompatible compounds with a variety of medical applications. Despite significant interest, the study of interfacial properties of fluorocarbons in aqueous systems has received limited attention. In this study, we investigate the influence of perfluoropentane and perfluorohexane vapors on the surface tension of water at room temperature. The results show a substantial decrease in the surface tension of water in the presence of perfluorocarbon vapors. In the investigated range of partial pressures up to the saturation value, a linear correlation between the surface tension and the partial pressure was found. This suggests that an adsorbed perfluorocarbon layer is formed on the surface of water. For comparison, the effect of the perfluorocarbon vapor on the surface tension of methanol was also investigated and a similar dependence was observed. Our results indicate that the stability and dynamic transitions of fluorocarbon colloids, which may be dispersed under physiological conditions as microdroplets, bubbles, or their combination, are likely affected by the composition of liquid and gas phases.