Decellularization of Wharton's Jelly Increases Its Bioactivity and Antibacterial Properties.

The field of regenerative medicine has recently seen an emerging trend toward decellularized extracellular matrix (ECM) as a biological scaffold for stem cell-delivery. Human umbilical cord represents a valuable opportunity from both technical and ethical point of view to obtain allogenic ECM. Herein, we established a protocol, allowing the full removal of cell membranes and nuclei moieties from Wharton's jelly (WJ) tissue. No alterations in the ECM components (i.e., collagen, GAG content, and growth factors), physical (i.e., porosity and swelling) and mechanical (i.e., linear tensile modulus) properties were noticed following WJ processing. Furthermore, no effect of the tissue processing on macromolecules and growth factors retention was observed, assuring thus a suitable bioactive matrix for cell maintenance upon recellularization. Based on the in vitro and in vivo biodegradability and stromal cell homing capabilities, decellularized WJ could provide an ideal substrate for stromal cells adhesion and colonization. Interestingly, the tissue processing increased the antibacterial and antiadhesive properties of WJ against Staphylococcus aureus and Staphylococcus epidermidis pathogens. Altogether, our results indicate that decellularized WJ matrix is able to limit Staphylococcus-related infections and to promote stromal cell homing, thus offering a versatile scaffold for tissue regenerative medicine.

Bone marrow mesenchymal stem cells offer an immune-privileged niche to Cutibacterium acnes in case of implant-associated osteomyelitis.

Considered as some of the most devastating complications, Cutibacterium acnes (C. acnes)-related osteomyelitis are among the hardest infections to diagnose and treat. Mesenchymal stem cells (MSCs) secrete number of immunomodulatory and antimicrobial soluble factors, making them an attractive treatment for bacterial infection. In this study, we examined MSCs/C. acnes interaction and analyzed the subsequent MSCs and bacteria's behaviors. Human bone marrow-derived MSCs were infected by C. acnes clinical strain harvested from non-infected bone site. Following 3 h of interaction, around 4% of bacteria were found in the intracellular compartment. Infected MSCs increased the secretion of prostaglandin E2 and indolamine 2,3 dioxygenase immunomodulatory mediators. Viable intracellular bacteria analyzed by infrared spectroscopy and atomic force microscopy revealed deep modifications in the wall features. In comparison with unchallenged bacteria, the viable intracellular bacteria showed (i) an increase in biofilm formation on orthopaedical-based materials, (ii) an increase in the invasiveness of osteoblasts and (iii) persistence in macrophage, suggesting the acquisition of virulence factors. Overall, these results showed a direct impact of C. acnes on bone marrow-derived MSCs, suggesting that blocking the C. acnes/MSCs interactions may represent an important new approach to manage chronic osteomyelitis infections. STATEMENT OF SIGNIFICANCE: The interaction of bone commensal C. acnes with bone marrow mesenchymal stem cells induces modifications in C. acnes wall characteristics. These bacteria increased (i) the biofilm formation on orthopaedical-based materials, (ii) the invasiveness of bone forming cells and (iii) the resistance to macrophage clearance through the modification of the wall nano-features and/or the increase in catalase production.

Surface modification of polymer textile biomaterials by N2 supercritical jet: Preliminary mechanical and biological performance assessment.

Foreign Body Reaction (FBR) is a critical issue to be addressed when polyethylene terephthalate (PET) textile implants are considered in the medical field to treat pathologies involving hernia repair, revascularization strategies in arterial disease, and aneurysm or heart valve replacement. The natural porosity of textile materials tends to induce exaggerated tissue ingrowth which may prevent the implants from remaining flexible. One hypothesized way to limit the FBR process is to increase the material surface roughness at the yarn level. Supercritical N2 (ScN2) jet particle projection is a technique that provides enough velocity to particles in order to induce plastic deformation on the impacted surface. This work investigates the influence of ScN2 jet projection parameters like standoff distance or particle size on the roughness that can be obtained on medical polymer yarns of various diameters (100 and 400 µm) and woven textile surfaces obtained from a 100 µm yarn. Moreover, the mechanical and biological performances of the obtained modified textile material are assessed. Results bring out that with appropriate testing conditions (500 bars jet/500 mm distance between nozzle and PET textile) and particle size around 50 µm, it is possible to generate 20 µm large and 4 µm deep craters on a 100 µm monofilament PET yarn and fabric. Regarding the strength of the textile material, it is only slightly modified with the treatment process, as the tenacity of the yarns decreases by only 10%. Moreover, It is shown that the obtained structures tend to limit the adhesion and slow down the proliferation of human fibroblasts.

Interaction of Cutibacterium acnes with human bone marrow derived mesenchymal stem cells: a step toward understanding bone implant- associated infection development.

Crosstalk between mesenchymal stem cells (MSCs) and bacteria plays an important role in regulating the regenerative capacities of MSCs, fighting infections, modulating immune responses and maintaining tissue homeostasis. Commensal Cutibacterium acnes (C. acnes) bacterium becomes an opportunistic pathogen causing implant-associated infections. Herein, we examined MSCs/C. acnes interaction and analysed the subsequent bacteria and MSCs behaviours following infection. Human bone marrow derived MSCs were infected by two clinical and one laboratory C. acnes strains. Following 3h of interaction, all bacterial strains were able to invade MSCs. Viable intracellular bacteria acquired virulence factors by increasing biofilm formation and/or by affecting macrophage phagocytosis. Although the direct and indirect (through neutrophil stimulation) antibacterial effects of the MSCs secretome were not enhanced following C. acnes infection, ELISA analysis revealed that C. acnes clinical strains are able to license MSCs to become immunosuppressive cell-like by increasing the secretion of IL-6, IL-8, PGE-2, VEGF, TGF-ß and HGF. Overall, these results showed a direct impact of C. acnes on bone marrow derived MSCs, providing new insights into the development of C. acnes during implant-associated infections. STATEMENT OF SIGNIFICANCE: The originality of this work relies on the study of relationship between human bone marrow derived mesenchymal stem cells (MSCs) phenotype and C. acnes clinical strains virulence following cell infection. Our major results showed that C. acnes are able to invade MSCs, inducing a transition of commensal to an opportunistic pathogen behaviour. Although the direct and indirect antibacterial effects were not enhanced following C. acnes infection, secretome analysis revealed that C. acnes clinical strains were able to license MSCs to become immunosuppressive and anti-fibrotic cell-like. These results showed a direct impact of C. acnes on bone marrow derived MSCs, providing new insights into the development of C. acnes during associated implant infections.

Dichlorodiphenyltrichloroethane exposure and anogenital distance in the Venda Health Examination of Mothers, Babies and their Environment (VHEMBE) birth cohort study, South Africa.

Dichlorodiphenyltrichloroethane (DDT) is used for malaria control by 10 countries, nine of which are in Africa. Technical DDT contains various isomers with 65-80% insecticidal p,p'-DDT and 15-21% o,p'-DDT, an estrogenic chemical, while the persistent metabolite of p,p'-DDT, dichlorodiphenyldichloroethylene (p,p'-DDE), is an antiandrogen. In utero antiandrogenic exposure reduces anogenital distance in animal models and the anal position index in a single study. This study examined the associations between mother's serum DDT and DDE levels at delivery and anogenital distance in their children at birth and age 1 year. Data were collected as part of the Venda Health Examination of Mothers, Babies and their Environment (VHEMBE), a birth cohort study located in rural South Africa. DDT and DDE concentrations were measured in blood samples collected from 752 mothers at delivery. Anogenital distance measurements, taken at birth (n = 671) and age 1 year (n = 674), included anofourchette and anoclitoral distances in girls, and anoscrotal and anopenile lengths in boys. We also measured anococcygeal and coccyx-fourchette distances in girls, while in boys, we measured anococcygeal and coccyx-scrotal distances as well as penile length and penile width. The anal position index is calculated for both sexes as anoscrotal/coccyx-scrotal in boys and anofourchette/coccyx-fourchette in girls. We found no associations between p,p'-DDT/-DDE or o,p'-DDT and anogenital distance measurements at birth in either boys or girls. At 1 year, o,p'-DDE was negatively associated with anofourchette in girls (ß =-1.32 mm, 95% confidence interval (CI) = -2.27, -0.38) and positively associated with penile width in boys (ß = 0.30 mm, 95% CI = 0.00, 0.60). The results do not suggest an overt antiandrogenic or estrogenic effect on anogenital distance after long-term DDT exposure. These weak associations may be due to chance.

Tuning near field radiative heat flux through surface excitations with a metal insulator transition.

The control of heat flow is a formidable challenge due to lack of good thermal insulators. Promising new opportunities for heat flow control were recently theoretically discovered for radiative heat flow in near field, where large heat flow contrasts may be achieved by tuning electronic excitations on surfaces. Here we show experimentally that the phase transition of VO2 entails a change of surface polariton states that significantly affects radiative heat transfer in near field. In all cases the Derjaguin approximation correctly predicted radiative heat transfer in near field, but it underestimated the far field limit. Our results indicate that heat flow contrasts can be realized in near field that can be larger than those obtained in far field.

Nanoscale radiative heat flow due to surface plasmons in graphene and doped silicon.

Owing to its two-dimensional electronic structure, graphene exhibits many unique properties. One of them is a wave vector and temperature dependent plasmon in the infrared range. Theory predicts that due to these plasmons, graphene can be used as a universal material to enhance nanoscale radiative heat exchange for any dielectric substrate. Here we report on radiative heat transfer experiments between SiC and a SiO2 sphere that have nonmatching phonon polariton frequencies, and thus only weakly exchange heat in near field. We observed that the heat flux contribution of graphene epitaxially grown on SiC dominates at short distances. The influence of plasmons on radiative heat transfer is further supported with measurements for doped silicon. These results highlight graphene's strong potential in photonic near field and energy conversion devices.

Large variation in the boundary-condition slippage for a rarefied gas flowing between two surfaces.

We study the slippage of a gas along mobile rigid walls in the sphere-plane confined geometry and find that it varies considerably with pressure. The classical no-slip boundary condition valid at ambient pressure changes continuously to an almost perfect slip condition in a primary vacuum. Our study emphasizes the key role played by the mean free path of the gas molecules on the interaction between a confined fluid and solid surfaces and further demonstrates that the macroscopic hydrodynamics approach can be used with confidence even in a primary vacuum environment where it is intuitively expected to fail.

"Negative" backaction noise in interferometric detection of a microlever.

Interferometric detection of mirror displacements is intrinsically limited by laser shot noise. In practice, however, it is often limited by thermal noise. Here we report on an experiment performed at the liquid helium temperature to overcome the thermal noise limitation and investigate the effect of classical laser noise on a microlever that forms a Fabry-Perot cavity with an optical fiber. The spectral noise densities show a region of "negative" contribution of the backaction noise close to the resonance frequency. We interpret this noise reduction as a coherent coupling of the microlever to the laser intensity noise. This optomechanical effect could be used to improve the detection sensitivity as discussed in proposals going beyond the standard quantum limit.

Viscous cavity damping of a microlever in a simple fluid.

We consider the problem of oscillation damping in air of a thermally actuated microlever as it gradually approaches an infinite wall in parallel geometry. As the gap is decreased from 20 microm down to 400 nm, we observe the increasing damping of the lever Brownian motion in the fluid laminar regime. This manifests itself as a linear decrease in the lever quality factor accompanied by a dramatic softening of its resonance, and eventually leads to the freezing of the CL oscillation. We are able to quantitatively explain this behavior by analytically solving the Navier-Stokes equation with perfect slip boundary conditions. Our findings may have implications for microfluidics and micro- and nanoelectromechanical applications.

A MEMS-based high frequency x-ray chopper.

Time-resolved x-ray experiments require intensity modulation at high frequencies (advanced rotating choppers have nowadays reached the kHz range). We here demonstrate that a silicon microlever oscillating at 13 kHz with nanometric amplitude can be used as a high frequency x-ray chopper. We claim that using micro-and nanoelectromechanical systems (MEMS and NEMS), it will be possible to achieve higher frequencies in excess of hundreds of megahertz. Working at such a frequency can open a wealth of possibilities in chemistry, biology and physics time-resolved experiments.

Mechanical mode dependence of bolometric backaction in an atomic force microscopy microlever.

Two backaction (BA) processes generated by an optical cavity-based detection device can deeply transform the dynamical behavior of an atomic force microscopy microlever: the photothermal force or the radiation pressure. Whereas noise damping or amplifying depends on the optical cavity response for radiation pressure BA, we present experimental results carried out under vacuum and at room temperature on the photothermal BA process which appears to be more complex. We show for the first time that it can simultaneously act on two vibration modes in opposite directions: Noise on one mode is amplified, whereas it is damped on another mode. Basic modeling of photothermal BA shows that the dynamical effect on the mechanical mode is laser spot position-dependent with respect to mode shape. This analysis accounts for opposite behaviors of different modes as observed.

X-ray pushing of a mechanical microswing.

We report here for the first time the combination of x-ray synchrotron light and a micro-electro-mechanical system (MEMS). We show how it is possible to modulate in real time a MEMS mass distribution to induce a nanometric and tunable mechanical oscillation. The quantitative experimental demonstration we present here uses periodic thermal dilatation of a Ge microcrystal attached to a Si microlever, induced by controlled absorption of an intensity modulated x-ray microbeam. The mechanism proposed can be envisaged either for the detection of small heat flux or for the actuation of a mechanical system.

Imaging electron wave functions inside open quantum rings.

Combining scanning gate microscopy (SGM) experiments and simulations, we demonstrate low temperature imaging of the electron probability density |Psi|(2)(x,y) in embedded mesoscopic quantum rings. The tip-induced conductance modulations share the same temperature dependence as the Aharonov-Bohm effect, indicating that they originate from electron wave function interferences. Simulations of both |Psi|(2)(x,y) and SGM conductance maps reproduce the main experimental observations and link fringes in SGM images to |Psi|(2)(x,y).

Increase in plasma pollutant levels in response to weight loss is associated with the reduction of fasting insulin levels in men but not in women.

Environmental pollutants can act as endocrine modulators. In this study, we examined whether weight loss-induced changes in plasma organochlorine compounds (OC) were associated with those in plasma insulin levels. Fasting insulin and the area under the curve (AUC) of insulin after a 75-g oral glucose load, plasma levels of 1 commercial polychlorinated biphenyl (PCB) mixture (Aroclor 1260), 1 PCB congener (PCB 153), and 3 pesticides (2,2'-bis(4-chlorophenyl)-1,1-dichloroethylene (p,p'-DDE), beta-hexachlorocyclohexane (beta-HCH), and hexachlorobenzene (HCB)) were measured before and after a 15-week weight loss program induced by a caloric restriction in a sample of obese men and women. Both genders showed a similar reduction in body weight (approximately 11 kg) in response to treatment, although men lost significantly more fat mass than women (mean +/- SD 9.4 +/- 4.1 v 5.9 +/- 5 kg, respectively, P <.05). Fasting insulin and AUC of insulin significantly decreased in men and women after the treatment. In response to weight loss, a significant increase in OC was observed in both genders, and this effect was more pronounced in men. The greater the increase in plasma OC levels, the greater the reduction in fasting insulin was in response to weight loss in men (-.49 < r < -.59, P <.05), but not in women (-.22 < r <.01, not significant [NS]). In both genders, no relationship was observed between changes in plasma OC levels and changes in AUC of insulin (-.41 < r < -.08, NS). In men, relationships between changes in plasma HCB, Aroclor 1260, and PCB-153 concentrations and those in fasting insulin levels in response to weight loss remained significantly correlated after correction for fat mass loss (-.46 < partial r < -.51, P values ranging from.05 to.07). These results suggest that weight loss-induced increase in plasma pollutant levels tends to be independently associated with the reduction of fasting insulin levels in men, but not in women. Further studies are needed to verify whether these findings are causally related.

Increase in plasma pollutant levels in response to weight loss in humans is related to in vitro subcutaneous adipocyte basal lipolysis.

OBJECTIVE: To examine whether weight loss-induced changes in in vitro basal lipolysis of subcutaneous abdominal and femoral fat cells were related to those in plasma organochlorine levels. DESIGN: A 15 week weight loss program induced by a moderate caloric restriction. SUBJECTS: Seventeen men and 20 women (age 36-50 y, body fat 25-50%). MEASUREMENTS: In vitro basal lipolysis of subcutaneous abdominal and femoral adipocytes and plasma levels of five polychlorinated biphenyl congeners (Aroclor 1260, PCBs 118, 138, 153 and 180) and three chlorinated pesticides (dichlorodiphenyl dichloroethene (p,p'-DDE), beta-hexachlorocyclohexane (beta-HCH) and hexachlorobenzene (HCB)) were measured before and after the weight reducing program. RESULTS: Both genders showed a similar reduction in body weight (approximately 11 kg) in response to treatment, although men lost significantly more fat mass than women (mean+/-s.d., 9.4+/-4.1 vs 5.9+/-5 kg, respectively, P<0.05). Mean basal fat cell lipolysis did not vary before and after weight reduction, regardless of depots and genders. In response to weight loss, significant increases of all organochlorines investigated were observed in men, whereas only p,p'-DDE, Aroclor 1260, PCBs 153 and 180 significantly rose in women. In men, higher the increase in basal lipolysis of subcutaneous abdominal or femoral adipocytes, greater the rise in plasma levels of most pollutants (HCB, Aroclor 1260, PCBs 118, 138 and 153) was in response to weight loss (0.51

[The transformation process among a group of heart patients followed in ergotherapy with the aim of modifying the balance of occupation]. / Processus de transformation chez un groupe de personnes cardiaques suivies en ergothérapie pour une modification de leur équilibre du fonctionnement occupationnel.

Transformative learning is a process of adaptation that allows for profound personal change in occupational therapy clients. This process is provoked by a triggering factor, such as illness, which results in a critical reflection on values, beliefs, feelings and personal knowledge associated with the object of change (Mezirow, 1991). As part of an objective aimed at modifying the balance of occupation, nine participants were interviewed over a 6 month period to explore their processes of change. Eight concepts related to the objective of change of the balance of occupation emerged from an inductive data analysis process (Glaser and Strauss, 1967). The perception of work was interpreted by the authors as having undergone the most significant sense of transformation amongst the participants. Two other perceptions, 1) the definition of self and 2) the concept of health emerged as new elements essential to the modification of the balance of occupation. The transformation process linked to these eight concepts revealed a specific structure and sequence. The results highlight the primary role of critical reflection amongst occupational therapy clients and underline the importance of deconstructing common values and beliefs which could slow down the process of change. Moreover, the development of new values and beliefs is a vehicle for change in occupational therapy.

Body weight loss increases plasma and adipose tissue concentrations of potentially toxic pollutants in obese individuals.

BACKGROUND: While there appears to be a consensus among scientists and clinicians that body weight loss reduces the risk of several chronic diseases, these apparently favourable effects should be balanced against any potentially harmful side effect of weight loss. In this regard, weight loss has been shown to produce an increase in blood concentration of potentially toxic organochlorine pollutants in animals that can cause prejudice to health, but human data are lacking. METHODS: Thirty-nine obese individuals were subjected to a hypocaloric diet during 15 weeks. Blood and subcutaneous adipose tissue samples were analysed before and after treatment for 26 organochlorine compounds. A control group consisting of 57 women of similar mean age was also formed in order to compare plasma concentrations. RESULTS: Organochlorine pollutants were found in every subject and all 19 compounds detected had their plasma concentration increased following treatment (mean body weight loss 9.5 kg), 15 of which were statistically significant. When compared with a control group, five compounds increased significantly. These observations persisted after an 18 week low-fat diet/exercise program follow-up. Increases were correlated with body weight loss (-0.3 > or = r > or = -0.6, P<0.05) and adipose tissue analyses yielded similar results, as their concentration of organochlorine compounds increased following treatment. CONCLUSION: Body weight loss increases plasma and subcutaneous adipose tissue concentrations of organochlorine pesticides and PCBs in obese subjects. These results raise concerns about an undesired and potentially harmful side effect of weight loss in some obese patients who seem to be at greater risk of health problems than leaner subjects since they show higher organochlorine body burden.

Direct 3D imaging of Al70.4Pd21Mn8.6 quasicrystal local atomic structure by X-ray holography

Inverse x-ray fluorescence holography was used to explore the local atomic order of a nearly perfect quasicrystal with composition Al70. 4Pd21Mn8.6. We have demonstrated the possibility of direct 3D imaging of the atomic decoration in a quasicrystal. We have obtained the average 3D environment of selected coordination shells around the Mn atoms. These results open the way to obtaining further and more complete information about the various coordination shells in complex materials by measuring multiple energy x-ray holograms at different sites.