Acetone and Toluene Gas Sensing by WO3: Focusing on the Selectivity from First Principle Calculations.

Sensitivity and selectivity are the two major parameters that should be optimized in chemiresistive devices with boosted performances towards Volatile Organic Compounds (VOCs). Notwithstanding a plethora of metal oxides/VOCs combinations that have been investigated so far, a close inspection based on theoretical models to provide guidelines to enhance sensors features has been scarcely explored. In this work, we measured experimentally the sensor response of a WO3 chemiresistor towards gaseous acetone and toluene, observing a two orders of magnitude higher signal for the former. In order to gain insight on the observed selectivity, Density Functional Theory was then adopted to elucidate how acetone and toluene molecules adsorption may perturb the electronic structure of WO3 due to electrostatic interactions with the surface and hybridization with its electronic structure. The results of acetone adsorption suggest the activation of the carbonyl group for reactions, while an overall lower charge redistribution on the surface and the molecule was observed for toluene. This, combined with acetone's higher binding energy, justifies the difference in the final responses. Notably, the presence of surface oxygen vacancies, characterizing the nanostructure of the oxide, influences the sensing performances.

How Can the Introduction of Zr4+ Ions into TiO2 Nanomaterial Impact the DSSC Photoconversion Efficiency? A Comprehensive Theoretical and Experimental Consideration.

A series of pure and doped TiO2 nanomaterials with different Zr4+ ions content have been synthesized by the simple sol-gel method. Both types of materials (nanopowders and nanofilms scratched off of the working electrode's surface) have been characterized in detail by XRD, TEM, and Raman techniques. Inserting dopant ions into the TiO2 structure has resulted in inhibition of crystal growth and prevention of phase transformation. The role of Zr4+ ions in this process was explained by performing computer simulations. The three structures such as pure anatase, Zr-doped TiO2, and tetragonal ZrO2 have been investigated using density functional theory extended by Hubbard correction. The computational calculations correlate well with experimental results. Formation of defects and broadening of energy bandgap in defected Zr-doped materials have been confirmed. It turned out that the oxygen vacancies with substituting Zr4+ ions in TiO2 structure have a positive influence on the performance of dye-sensitized solar cells. The overall photoconversion efficiency enhancement up to 8.63% by introducing 3.7% Zr4+ ions into the TiO2 has been confirmed by I-V curves, EIS, and IPCE measurements. Such efficiency of DSSC utilizing the working electrode made by Zr4+ ions substituted into TiO2 material lattice has been for the first time reported.

Engineering of SnO2-Graphene Oxide Nanoheterojunctions for Selective Room-Temperature Chemical Sensing and Optoelectronic Devices.

The development of high-performing sensing materials, able to detect ppb-trace concentrations of volatile organic compounds (VOCs) at low temperatures, is required for the development of next-generation miniaturized wireless sensors. Here, we present the engineering of selective room-temperature (RT) chemical sensors, comprising highly porous tin dioxide (SnO2)-graphene oxide (GO) nanoheterojunction layouts. The optoelectronic and chemical properties of these highly porous (>90%) p-n heterojunctions were systematically investigated in terms of composition and morphologies. Optimized SnO2-GO layouts demonstrate significant potential as both visible-blind photodetectors and selective RT chemical sensors. Notably, a low GO content results in an excellent UV light responsivity (400 A W-1), with short rise and decay times, and RT high chemical sensitivity with selective detection of VOCs such as ethanol down to 100 ppb. In contrast, a high concentration of GO drastically decreases the RT response to ethanol and results in good selectivity to ethylbenzene. The feasibility of tuning the chemical selectivity of sensor response by engineering the relative amount of GO and SnO2 is a promising feature that may guide the future development of miniaturized solid-state gas sensors. Furthermore, the excellent optoelectronic properties of these SnO2-GO nanoheterojunctions may find applications in various other areas such as optoelectronic devices and (photo)electrocatalysis.

Exploring SnxTi1-xO2 Solid Solutions Grown onto Graphene Oxide (GO) as Selective Toluene Gas Sensors.

The major drawback of oxide-based sensors is the lack of selectivity. In this context, SnxTi1-xO2/graphene oxide (GO)-based materials were synthesized via a simple hydrothermal route, varying the titanium content in the tin dioxide matrix. Then, toluene and acetone gas sensing performances of the as-prepared sensors were systematically investigated. Specifically, by using 32:1 SnO2/GO and 32:1 TiO2/GO, a greater selectivity towards acetone analyte, also at room temperature, was obtained even at ppb level. However, solid solutions possessing a higher content of tin relative to titanium (as 32:1 Sn0.55Ti0.45O2/GO) exhibited higher selectivity towards bigger and non-polar molecules (such as toluene) at 350 °C, rather than acetone. A deep experimental investigation of structural (XRPD and Raman), morphological (SEM, TEM, BET surface area and pores volume) and surface (XPS analyses) properties allowed us to give a feasible explanation of the different selectivity. Moreover, by exploiting the UV light, the lowest operating temperature to obtain a significant and reliable signal was 250 °C, keeping the greater selectivity to the toluene analyte. Hence, the feasibility of tuning the chemical selectivity by engineering the relative amount of SnO2 and TiO2 is a promising feature that may guide the future development of miniaturized chemoresistors.

A Novel Photocatalytic Purification System for Fish Culture.

The accumulation of nitrogen compounds represents a pivotal problem in the management of fish culture. Several methods were investigated in the last decades for treatment of waste waters, and the use of photocatalytic materials has received increasing attention. The photocatalytic degradation (PCD) process with titanium dioxide (TiO2) represents the most promising single-step method to promote the removal of nitrogen compounds from water. The present study compares for the first time the effects on fish culture of a classical mechanical, biological, and ultraviolet purification system to a TiO2-PCD one, with particular emphasis on water chemistry and on physiological responses in zebrafish. Fish were exposed for 14 days to the two different purification systems and samplings were performed 7 and 14 days after the experiment beginning. The photocatalytic system showed excellent efficiency in removing nitrogen compounds from water with no significant adverse effects on fish. Physiological analysis on fish samples included histological analysis of gills and gut, TUNEL assay of the gills, and real-time polymerase chain reaction (liver) of genes involved in stress response and growth. No significant biological alterations were detectable on the cultured fish.

Fabrication of Pt/Ti/TiO2 Photoelectrodes by RF-Magnetron Sputtering for Separate Hydrogen and Oxygen Production.

Evolution of pure hydrogen and oxygen by photocatalytic water splitting was attained from the opposite sides of a composite Pt/Ti/TiO2 photoelectrode. The TiO2 films were prepared by radio frequency (RF)-Magnetron Sputtering at different deposition time ranging from 1 up to 8 h and then characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and ultraviolet-visible-near infrared (UV-vis-NIR) diffuse reflectance spectroscopy. The photocatalytic activity was evaluated by incident photon to current efficiency (IPCE) measurements and by photocatalytic water splitting measurements in a two-compartment cell. The highest H2 production rate was attained with the photoelectrode prepared by 6 h-long TiO2 deposition thanks to its high content in the rutile polymorph, which is active under visible light. By contrast, the photoactivity dropped for longer deposition time, because of the increased probability of electron-hole recombination due to the longer electron transfer path.

Modulated excitation extended X-ray absorption fine structure spectroscopy.

The sensitivity of extended X-ray absorption fine structure spectroscopy (EXAFS) for minute structural changes can be enhanced by combination with the modulated excitation approach and making use of phase sensitive analysis. A modulated EXAFS experiment of a reversible periodic Pd to PdO partial oxidation has been simulated in order to understand the effect of the phase sensitive analysis on the shape and meaning of the resulting phase-resolved EXAFS spectra. In particular, the simulation comprises either a synchronous or a delayed sinusoidal variation of the EXAFS parameters, i.e. coordination number (N), interatomic distance (R) and Debye-Waller factor (σ(2)), of first Pd-Pd, first Pd-O, and second Pd-(O)-Pd coordination shells. The effect of these variations on the resulting phase-resolved Fourier transform EXAFS spectra is discussed. The results of the simulation are validated by an in situ EXAFS experiment at the Pd K-edge over 1.6 wt% Pd/Al2O3 undergoing reversible partial oxidation in a H2vs. O2 modulation at 573 K. It is shown that phase sensitive detection (PSD) is able to separate the minor contribution at ca. 2.8 Å corresponding to the growth of the Pd-(O)-Pd shell that is otherwise hidden under the static signal of the Pd-Pd shell of reduced Pd particles. The fitting of the phase-resolved EXAFS spectra suggests that the fast H2 to O2 switch leads the partial oxidation of the Pd surface with the formation of a PdO shell covering a metallic Pd core. Therefore, the dynamics of the full system can be described with greater detail than in conventional EXAFS. The intention of this work is to provide the tools and therefore a solid guidance to qualitatively and quantitatively understand the nature of the shape of phase-resolved FT-EXAFS spectra that may prove helpful in the analysis of a wide range of functional materials.

Adding diffuse reflectance infrared Fourier transform spectroscopy capability to extended x-ray-absorption fine structure in a new cell to study solid catalysts in combination with a modulation approach.

We describe a novel cell used to combine in situ transmission X-ray absorption spectroscopy (XAS) with diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) in a single experiment. The novelty of the cell design compared to current examples is that both radiations are passed through an X-ray and IR transparent window in direct contact with the sample. This innovative geometry also offers a wide surface for IR collection. In order to avoid interference from the crystalline IR transparent materials (e.g., CaF2, MgF2, diamond) a 500 µm carbon filled hole is laser drilled in the center of a CaF2 window. The cell is designed to represent a plug flow reactor, has reduced dead volume in order to allow for fast exchange of gases and is therefore suitable for experiments under fast transients, e.g., according to the concentration modulation approach. High quality time-resolved XAS and DRIFTS data of a 2 wt.% Pt/Al2O3 catalyst are obtained in concentration modulation experiments where CO (or H2) pulses are alternated to O2 pulses at 150 °C. We show that additional information can be obtained on the Pt redox dynamic under working conditions thanks to the improved sensitivity given by the modulation approach followed by Phase Sensitive Detection (PSD) analysis. It is anticipated that the design of the novel cell is likely suitable for a number of other in situ spectroscopic and diffraction methods.

Revealing the dynamic structure of complex solid catalysts using modulated excitation X-ray diffraction.

X-ray diffraction (XRD) is typically silent towards information on low loadings of precious metals on solid catalysts because of their finely dispersed nature. When combined with a concentration modulation approach, time-resolved high-energy XRD is able to provide the detailed redox dynamics of palladium nanoparticles with a diameter of 2 nm in 2 wt % Pd/CZ (CZ = ceria-zirconia), which is a difficult sample for extended X-ray absorption fine structure (EXAFS) measurements because of the cerium component. The temporal evolution of the Pd(111) and Ce(111) reflections together with surface information from synchronous diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements reveals that Ce maintains Pd oxidized in the CO pulse, whereas reduction is detected at the beginning of the O2 pulse. Oxygen is likely transferred from Pd to Ce(3+) before the onset of Pd re-oxidation. In this context, adsorbed carbonates appear to be the rate-limiting species for re-oxidation.

Synchrotron high energy X-ray methods coupled to phase sensitive analysis to characterize aging of solid catalysts with enhanced sensitivity.

X-ray absorption spectroscopy and X-ray diffraction are suitable probes of the chemical state of a catalyst under working conditions but are limited to bulk information. Here we show in two case studies related to hydrothermal aging and chemical modification of model automotive catalysts that enhanced detailed information of structural changes can be obtained when the two methods are combined with a concentration modulated excitation (cME) approach and phase sensitive detection (PSD). The catalysts are subject to a modulation experiment consisting of the periodic variation of the gas feed composition to the catalyst and the time-resolved data are additionally treated by PSD. In the case of a 2 wt% Rh/Al2O3 catalyst, a very small fraction (ca. 2%) of Rh remaining exposed at the alumina surface after hydrothermal aging at 1273 K can be detected by PSD. This Rh is sensitive to the red-ox oscillations of the experiment and is likely responsible for the observed catalytic activity and selectivity during NO reduction by CO. In the case of a 1.6 wt% Pd/Al2O3-Ce(1-x)Zr(x)O2 catalyst, preliminary results of cME-XRD demonstrate that access to the kinetics of the whole material at work can be obtained. Both the red-ox processes involving the oxygen storage support and the Pd component can be followed with great precision. PSD enables the differentiation between Pd deposited on Al2O3 or on Ce(1-x)Zr(x)O2. Modification of the catalyst by phosphorous clearly induces loss of the structural dynamics required for oxygen storage capacity that is provided by the Ce(4+)/Ce(3+) pair. The two case studies demonstrate that detailed kinetics of subtle changes can be uncovered by the combination of in situ X-ray absorption and high energy diffraction methods with PSD.

Perovskite-related oxynitrides in photocatalysis.

Over the last decades photocatalytic water splitting has become of increasing importance for fundamental and applied research, since the direct conversion of sunlight into chemical energy via the production of H2 has the potential to contribute to the world's energy needs without CO2 generation. One of the unsolved challenges consists of finding a highly efficient photocatalyst that is cheap, environmentally friendly, contains exclusively abundant elements, is (photo)chemically stable and absorbs visible light. Photocatalytic efficiency is closely connected to both structural properties like crystallinity, particle size and surface area and to electronic properties like the band gap and the quantum efficiency. Hence extensive control over a large parameter field is necessary to design a good photocatalyst. A material class where the structure-composition-property relations and the influence of substitution effects are well studied is the perovskite-type family of compounds. The perovskite-related oxynitrides belong to this very flexible compound family where many of the necessary characteristics for a photocatalyst are already given and some of the intrinsic properties like the band gap can be tuned within the same crystal structure by substitution. In this work we present materials' design concepts to improve the photocatalytic efficiency of a perovskite-type catalyst and describe their effects on the photocatalytic activity.

Effects of TiO2 based photocatalytic paint on concentrations and emissions of pollutants and on animal performance in a swine weaning unit.

The beneficial effect of a TiO2-based photocatalytic treatment on the indoor air purification of a swine farm has been evaluated in a trial performed in two identical mechanically ventilated traditional weaning units, with 391 animals lodged in each of them. One unit was used as reference, whereas the walls of the second unit (260 m2) were coated with ca. 70 g m(-2) of TiO2 and irradiated with ten UV-A lamps. The environmental parameters (i.e. the ventilation rate, the internal and external temperature and relative humidity), together with NH3, CH4, CO2 and N2O concentrations in the exhaust ducts and PM10 emissions, were monitored in the two units throughout all of the production cycle (75 days). Significant decreases in CH4 concentration (ca. 27%, P < 0.05) and PM10 emission (ca. 17%, P < 0.01) were observed, together with an increase of the piglets' productive performance in the treated unit with respect to the reference one. Indeed, the ADG (Average Daily Gain of piglets) was 424 g vs. 414 g for the piglets lodged in the two units, respectively, with a significantly better feed conversion ratio (FCR, ratio between the food ingested by the animals and their weight gain) of 2.18 vs. 2.44 (P < 0.001). Therefore, the photocatalytic treatment with TiO2 coating had positive effects not only on methane concentration and particulate matter concentration and emission, but also significantly improved the feed conversion ratio of growing piglets, very likely due to the increased quality of indoor air, with positive economic repercussions for the farmer. Internal photocatalytic treatment in swine husbandry could thus be considered as a potential Best Available Technology (BAT).

Effect of titanium dioxide crystalline structure on the photocatalytic production of hydrogen.

The effect of the crystalline phase of TiO(2) (anatase, rutile and brookite) on its photocatalytic activity in hydrogen production from methanol-water vapours has been investigated by testing a series of both home-made and commercial TiO(2) photocatalysts, either bare or surface-modified by deposition of a fixed amount, i.e. 1 wt%, of platinum as co-catalyst. For all of the TiO(2) samples the rate of hydrogen production increased by one order of magnitude upon Pt deposition, because of the ability of Pt to enhance the separation of photoproduced electron-hole pairs. Under irradiation in the 350-450 nm wavelength range, brookite and anatase showed similar photoactivities, both superior to that of rutile. By contrast, rutile, possessing a narrower band gap, was active also under visible light (λ > 400 nm), whereas no hydrogen evolution was observed with anatase and brookite under such conditions. Surface area proved to be a key parameter, strongly influencing photoactivity. However, as the particle size became ultra-small, the semiconductor absorption edge was blue-shifted because of size quantisation effects, with a consequent decrease in hydrogen production rate due to the smaller portion of incident photons absorbed by the photocatalyst.

A photocatalytic water splitting device for separate hydrogen and oxygen evolution.

A two-compartment Plexiglas cell has been set up and tested for separate hydrogen and oxygen production from photocatalytic water splitting on a thin TiO2 layer deposited by magnetron sputtering on a flat Ti electrode inserted between the two cell compartments.