Nanoelectromechanical Position-Sensitive Detector with Picometer Resolution.

Subnanometer displacement detection lays the solid foundation for critical applications in modern metrology. In-plane displacement sensing, however, is mainly dominated by the detection of differential photocurrent signals from photodiodes, with resolution in the nanometer range. Here, we present an integrated nanoelectromechanical in-plane displacement sensor based on a nanoelectromechanical trampoline resonator. With a position resolution of 4 pm/ for a low laser power of 85 µW and a repeatability of 2 nm after five cycles of operation as well as good long-term stability, this new detection principle provides a reliable alternative for overcoming the current position detection limit in a wide variety of research and application fields.

Spectrally broadband electro-optic modulation with nanoelectromechanical string resonators.

In this paper, we present a shutter-based electro-optical modulator made of two parallel nanoelectromechanical silicon nitride string resonators. These strings are covered with electrically connected gold electrodes and actuated either by Lorentz or electrostatic forces. The in-plane string vibrations modulate the width of the gap between the strings. The gold electrodes on both sides of the gap act as a mobile mirror that modulate the laser light that is focused in the middle of this gap. These electro-optical modulators can achieve an optical modulation depth of almost 100% for a driving voltage lower than 1 mV at a frequency of 314 kHz. The frequency range is determined by the string resonance frequency, which can take values of the order of a few hundred kilohertz to several megahertz. The strings are driven in the strongly nonlinear regime, which allows a frequency tuning of several kilohertz without significant effect on the optical modulation depth.

Ultrathin 2 nm gold as impedance-matched absorber for infrared light.

Thermal detectors are a cornerstone of infrared and terahertz technology due to their broad spectral range. These detectors call for efficient absorbers with a broad spectral response and minimal thermal mass. A common approach is based on impedance-matching the sheet resistance of a thin metallic film to half the free-space impedance. Thereby, one can achieve a wavelength-independent absorptivity of up to 50%. However, existing absorber films typically require a thickness of the order of tens of nanometers, which can significantly deteriorate the response of a thermal transducer. Here, we present the application of ultrathin gold (2 nm) on top of a surfactant layer of oxidized copper as an effective infrared absorber. An almost wavelength-independent and long-time stable absorptivity of 47(3)%, ranging from 2 µm to 20 µm, can be obtained. The presented absorber allows for a significant improvement of infrared/terahertz technologies in general and thermal detectors in particular.

Single-molecule optical absorption imaging by nanomechanical photothermal sensing.

Absorption microscopy is a promising alternative to fluorescence microscopy for single-molecule imaging. So far, molecular absorption has been probed optically via the attenuation of a probing laser or via photothermal effects. The sensitivity of optical probing is not only restricted by background scattering but it is fundamentally limited by laser shot noise, which minimizes the achievable single-molecule signal-to-noise ratio. Here, we present nanomechanical photothermal microscopy, which overcomes the scattering and shot-noise limit by detecting the photothermal heating of the sample directly with a temperature-sensitive substrate. We use nanomechanical silicon nitride drums, whose resonant frequency detunes with local heating. Individual Au nanoparticles with diameters from 10 to 200 nm and single molecules (Atto 633) are scanned with a heating laser with a peak irradiance of 354 ± 45 µW/µm2 using 50× long-working-distance objective. With a stress-optimized drum we reach a sensitivity of 16 fW/Hz1/2 at room temperature, resulting in a single-molecule signal-to-noise ratio of >70. The high sensitivity combined with the inherent wavelength independence of the nanomechanical sensor presents a competitive alternative to established tools for the analysis and localization of nonfluorescent single molecules and nanoparticles.

Effects of the rotation angle on surface plasmon coupling of nanoprisms.

We studied the effects of relative orientation of bowtie nanostructures on the plasmon resonance both experimentally and theoretically in this work. Specifically, we fabricated gold bowtie nanoantennas with rotated nanoprisms, measured the near-field and the far-field resonance behaviors using Raman spectroscopy and scattering microspectroscopy, and simulated the effects of the rotation angle on the localized surface plasmonic resonance using finite-difference time-domain simulations. In addition to the widely-discussed dipolar resonance in regular bowtie nanostructures, defined as tip-mode resonance in the present study, the excitations of edge-mode resonance were discovered under certain rotation angles of nanoprisms. Because of the resonances of different modes at different wavelengths, two different incident laser sources were used to measure the Raman spectra to provide evidence for the evolution of different resonance modes. Also, both the tip-mode and edge-mode resonances were verified by the simulated charge density distribution and their trends were discussed. Based on the discovered trend, a plasmon protractor was created with a near-exponential decay relationship between the relative resonance wavelength shift and cosine of the rotation angle. A plasmon hybridization model was also proposed for rotated bowties to explain the coupling between nanoprisms during rotation.