ABSTRACT
Research on synthesizing micro- and nanosized materials directly from metals has attracted considerable attention because of its simplicity, ability to synthesize in large quantities, and high uniformity. This study proposes a simple method to synthesize high-uniformity or high-density V2O5 microurchins and nanowalls directly from vanadium powder. Remarkably, the synthesis condition of 60 °C for 1 h is considered to be an optimal condition to convert metals into micro- or nano-oxides. The as-synthesized V2O5 nanowalls can adsorb nearly 90% of methylene blue in the dark in 3 min. The adsorption selectivity of these samples with several pigments is investigated.
ABSTRACT
In this paper, we presented the preparation procedure of Pt nanoparticles with the well-controlled polyhedral morphology and size by a modified polyol method using AgNO(3) in accordance with the reduction of H(2)PtCl(6) in EG at high temperature around 160°C. The methods of UV-vis spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), and high resolution (HR) TEM measurements were used to characterize their surface morphology, size, and crystal structure. We have observed that the polyhedral Pt nanoparticles of sharp edges and corners were produced in the preferential homogenous growth as well as the formation of porous and large Pt particles by self-aggregation and assembly originating from as-prepared polyhedral Pt nanoparticles. It is most impressive to find that the arrangement of Pt nanoparticles was observed in their surface attachments, self-aggregation, random and directed surface self-assembly by the bottom-up approach. Their high electrocatalytic activity for methanol oxidation was predicted. The findings and results showed that the polyhedral Pt nanoparticle-based catalysts exhibited the high electrocatalytic activity for their potential applications in developing the efficient Pt-based catalysts for direct methanol fuel cells.
ABSTRACT
In this paper, Pt nanoparticles with good shapes of nanocubes and nano-octahedra and well-controlled sizes in the range 5-7 and 8-12 nm, respectively, have been successfully synthesized. The modified polyol method by adding silver nitrate and varying the molar ratio of the solutions of silver nitrate and H(2)PtCl(6) has been used to produce Pt nanoparticles of the size and shape to be controlled. The size and morphology of Pt nanoparticles have been studied by transmission electron microscopy (TEM) and high resolution TEM (HRTEM). The results have shown that their very sharp and good shapes exist in the main forms of cubic, cuboctahedral, octahedral and tetrahedral shapes directly related to the crystal nucleation along various directions of the [100] cubic, [111] octahedral and [111] tetrahedral facets during synthesis. In particular, various irregular and new shapes of Pt nanoparticles have been found. Here, it is concluded that the role of silver ions has to be considered as an important factor for promoting and controlling the development of Pt nanoparticles of [100] cubic, [111] octahedral and [111] tetrahedral facets, and also directly orienting the growth and formation of Pt nanoparticles.
ABSTRACT
This paper describes the DNA immobilization using carbon multi-walled nanotubes (MWCNTs) for direct and label-free detection of influenza virus (type A). The DNA probe was attached on the sensor surface by means of covalent bonding between the amine and phosphate groups of the DNA sequence. The interaction between the DNA probe and the MWCNTs were characterized by Fourier Transform Infrared (FTIR) spectrometry, Raman spectra. The hybridization of the DNA probe and the target DNA were detected by changes in the conductance on the surface of sensors leading to the change in the output signal of the system. The results show that the DNA sensor can detect as low as 0.5 nM of the target DNA samples; the response time of DNA sensor is approximately 4 min.
