Modulation of calcium oxalate dihydrate growth by phosphorylated osteopontin peptides.

Osteopontin (OPN) is a significant component of kidney stone matrix and a key modulator of stone formation. Here, we investigated the effects of different phosphorylated states of a synthesized peptide of OPN (the ASARM peptide; acidic, serine- and aspartate-rich motif) on calcium oxalate dihydrate (COD) crystals, a major mineral phase of kidney stones. In vitro, phosphorylated OPN-ASARM peptides strongly inhibited COD crystal growth in solution as compared to the nonphosphorylated state, with increasing inhibitory potency correlating with the degree of peptide phosphorylation. Scanning electron microscopy revealed that the inhibition from the phosphopeptides resulted in distinctive, rosette-like crystal aggregates called spherulites. The OPN-ASARM peptides preferentially bound and specifically inhibited the {1 1 0} crystallographic faces of COD, as identified by combining atomic force microscopy and computational simulation approaches. These {1 1 0} surfaces of COD have high lattice calcium occupancy (exposure), providing preferential binding sites for the highly acidic peptides; binding and inhibition by OPN-ASARM peptides at the {1 1 0} faces led to crystal aggregation and intergrowth. The crystal spherulite formations obtained in vitro when using the most phosphorylated form of OPN-ASARM peptide at a high concentration, resembled crystal morphologies observed in vivo in a rat model of urolithiasis, in which crystal deposits in the kidney contain abundant OPN as revealed by immunogold labeling. A mechanistic model for spherulite formation is proposed based on the symmetry and crystallographic structure of COD, where the phosphate groups of OPN-ASARM bind to calcium atoms at [1 1 1] step risers on the COD {1 1 0} surface, inducing the periodic emergence of new COD crystals to form spherulites.

Using biomimetic polymers in place of noncollagenous proteins to achieve functional remineralization of dentin tissues.

In calcified tissues such as bones and teeth, mineralization is regulated by an extracellular matrix, which includes non-collagenous proteins (NCP). This natural process has been adapted or mimicked to restore tissues following physical damage or demineralization by using polyanionic acids in place of NCPs, but the remineralized tissues fail to fully recover their mechanical properties. Here we show that pre-treatment with certain amphiphilic peptoids, a class of peptide-like polymers consisting of N-substituted glycines that have defined monomer sequences, enhances ordering and mineralization of collagen and induces functional remineralization of dentin lesions in vitro. In the vicinity of dentin tubules, the newly formed apatite nano-crystals are co-aligned with the c-axis parallel to the tubular periphery and recovery of tissue ultrastructure is accompanied by development of high mechanical strength. The observed effects are highly sequence-dependent with alternating polar and non-polar groups leading to positive outcomes while diblock sequences have no effect. The observations suggest aromatic groups interact with the collagen while the hydrophilic side chains bind the mineralizing constituents and highlight the potential of synthetic sequence-defined biomimetic polymers to serve as NCP mimics in tissue remineralization.

In vitro evaluation of adhesive characteristics of 4-META/MMA-TBB resin with organic filler.

OBJECTIVES: A commercial restorative material, BondfillSB (BF), is a modification of 4-META/MMA-TBB resin cement. BF uses a self-etching primer and added pre-polymerized organic fillers. We compared BF with another self-etching system, EasyBond (EB), in shear bond strength, bonded interface characteristics to human dentin and contraction gap when used in bulk-filling. METHODS: Shear bond strength of BF and EB + Z100 (Z), bonded by different experience-level operators, was evaluated. Bonded interfaces were characterized by SEM, AFM, and AFM based nano-indentation. Contraction gaps (CG) at 0h and 24h after polymerization were evaluated for BF or EB bulk filled class I cavities. To meet the clinical recommendation, BF's powder was replaced by experimental radioopaque powder (BFO) for the CG study. EB was used with Z (EBZ) or with a resin marketed for bulk-fill base (SureFil-SDR-flow (EBSF)). RESULTS: Shear bond strengths (Mean ± Standard Deviation (S.D.)) of BF (37.4 ± 2.6 MPa; n=36) were higher and less variable than EBZ (18.2 ± 7.6 MPa; n=36) (p<0.0001, One-way ANOVA). Weibull characteristic strength (η) differed significantly between materials (p<0.0001) but not between operators (p=0.90). EBZ often had non-uniform interfaces and a wider band of reduced elastic modulus (E) of greater than 20 µm across the interface. BF had uniform interfaces and a smaller width of affected dentin under the interface (∼1 µm). There was a difference in dentin-E between EBZ and BF up to 9 µm from the interface (mixed-effects model; P=0.03). A stratified linear regression model used for CG. EBSF and BFO showed significantly smaller CG than EBZ at time 0. None of three combinations showed any significant change between 0h-CG and 24h-CG. SIGNIFICANCE: BF possessed bonding characteristics required to serve as a restorative.

Energetic basis for the molecular-scale organization of bone.

The remarkable properties of bone derive from a highly organized arrangement of coaligned nanometer-scale apatite platelets within a fibrillar collagen matrix. The origin of this arrangement is poorly understood and the crystal structures of hydroxyapatite (HAP) and the nonmineralized collagen fibrils alone do not provide an explanation. Moreover, little is known about collagen-apatite interaction energies, which should strongly influence both the molecular-scale organization and the resulting mechanical properties of the composite. We investigated collagen-mineral interactions by combining dynamic force spectroscopy (DFS) measurements of binding energies with molecular dynamics (MD) simulations of binding and atomic force microscopy (AFM) observations of collagen adsorption on single crystals of calcium phosphate for four mineral phases of potential importance in bone formation. In all cases, we observe a strong preferential orientation of collagen binding, but comparison between the observed orientations and transmission electron microscopy (TEM) analyses of native tissues shows that only calcium-deficient apatite (CDAP) provides an interface with collagen that is consistent with both. MD simulations predict preferred collagen orientations that agree with observations, and results from both MD and DFS reveal large values for the binding energy due to multiple binding sites. These findings reconcile apparent contradictions inherent in a hydroxyapatite or carbonated apatite (CAP) model of bone mineral and provide an energetic rationale for the molecular-scale organization of bone.

Functional remineralization of dentin lesions using polymer-induced liquid-precursor process.

It was hypothesized that applying the polymer-induced liquid-precursor (PILP) system to artificial lesions would result in time-dependent functional remineralization of carious dentin lesions that restores the mechanical properties of demineralized dentin matrix. 140 µm deep artificial caries lesions were remineralized via the PILP process for 7-28 days at 37°C to determine temporal remineralization characteristics. Poly-L-aspartic acid (27 KDa) was used as the polymeric process-directing agent and was added to the remineralization solution at a calcium-to-phosphate ratio of 2.14 (mol/mol). Nanomechanical properties of hydrated artificial lesions had a low reduced elastic modulus (E(R) = 0.2 GPa) region extending about 70 µm into the lesion, with a sloped region to about 140 µm where values reached normal dentin (18-20 GPa). After 7 days specimens recovered mechanical properties in the sloped region by 51% compared to the artificial lesion. Between 7-14 days, recovery of the outer portion of the lesion continued to a level of about 10 GPa with 74% improvement. 28 days of PILP mineralization resulted in 91% improvement of E(R) compared to the artificial lesion. These differences were statistically significant as determined from change-point diagrams. Mineral profiles determined by micro x-ray computed tomography were shallower than those determined by nanoindentation, and showed similar changes over time, but full mineral recovery occurred after 14 days in both the outer and sloped portions of the lesion. Scanning electron microscopy and energy dispersive x-ray analysis showed similar morphologies that were distinct from normal dentin with a clear line of demarcation between the outer and sloped portions of the lesion. Transmission electron microscopy and selected area electron diffraction showed that the starting lesions contained some residual mineral in the outer portions, which exhibited poor crystallinity. During remineralization, intrafibrillar mineral increased and crystallinity improved with intrafibrillar mineral exhibiting the orientation found in normal dentin or bone.

Modulation of calcium oxalate dihydrate growth by selective crystal-face binding of phosphorylated osteopontin and polyaspartate peptide showing occlusion by sectoral (compositional) zoning.

Calcium oxalate dihydrate (COD) mineral and the urinary protein osteopontin/uropontin (OPN) are commonly found in kidney stones. To investigate the effects of OPN on COD growth, COD crystals were grown with phosphorylated OPN or a polyaspartic acid-rich peptide of OPN (DDLDDDDD, poly-Asp(86-93)). Crystals grown with OPN showed increased dimensions of the {110} prismatic faces attributable to selective inhibition at this crystallographic face. At high concentrations of OPN, elongated crystals with dominant {110} faces were produced, often with intergrown, interpenetrating twin crystals. Poly-Asp(86-93) dose-dependently elongated crystal morphology along the {110} faces in a manner similar to OPN. In crystal growth studies using fluorescently tagged poly-Asp(86-93) followed by imaging of crystal interiors using confocal microscopy, sectoral (compositional) zoning in COD was observed resulting from selective binding and incorporation (occlusion) of peptide exclusively into {110} crystal sectors. Computational modeling of poly-Asp(86-93) adsorption to COD {110} and {101} surfaces also suggests increased stabilization of the COD {110} surface and negligible change to the natively stable {101} surface. Ultrastructural, colloidal-gold immunolocalization of OPN by transmission electron microscopy in human stones confirmed an intracrystalline distribution of OPN. In summary, OPN and its poly-Asp(86-93) sequence similarly affect COD mineral growth; the {110} crystallographic faces become enhanced and dominant attributable to {110} face inhibition by the protein/peptide, and peptides can incorporate into the mineral phase. We, thus, conclude that the poly-Asp(86-93) domain is central to the OPN ability to interact with the {110} faces of COD, where it binds to inhibit crystal growth with subsequent intracrystalline incorporation (occlusion).

Colloidal-gold immunocytochemical localization of osteopontin in avian eggshell gland and eggshell.

During mineralization of the avian eggshell, there is a sequential and orderly deposition of both matrix and mineral phases. Therefore, the eggshell is an excellent model for studying matrix-mineral relationships and the regulation of mineralization. Osteopontin, as an inhibitor of crystal growth, potently influences the formation of calcium phosphate and calcium carbonate biominerals. The purpose of this study was to characterize matrix-mineral relationships, specifically for osteopontin, in the avian eggshell using high-resolution transmission (TEM) and scanning (SEM) electron microscopy to gain insight into how calcite crystal growth is structured and compartmentalized during eggshell mineralization. Osteopontin was localized at the ultrastructural level by colloidal-gold immunocytochemistry. In EDTA-decalcified eggshell, an extensive matrix network was observed by TEM and SEM throughout all regions and included interconnected fibrous sheets, irregularly shaped aggregates, vesicular structures, protein films, and isolated protein fibers. Osteopontin was associated with protein sheets in the highly mineralized palisades region; some of these features defined boundaries that compartmentalized different eggshell structural units. In fractured and undecalcified eggshell, osteopontin was immunolocalized on the {104} crystallographic faces of calcite-its natural cleavage plane. The specific occlusion of osteopontin into calcite during mineralization may influence eggshell structure to modify its fracture resistance.

Calcium oxalate crystals in fetal bovine serum: implications for cell culture, phagocytosis and biomineralization studies in vitro.

Cell culture methods and models are key investigative tools for cell and molecular biology studies. Fetal bovine serum (FBS) is commonly used as an additive during cell culture since its constituents promote cell survival, proliferation and differentiation. Here we report that commercially available FBS from different major suppliers consistently contain precipitated, calcium oxalate crystals-either in the monohydrate (COM) or dihydrate (COD) form. Mineral structure and phase identification of the crystals were determined by X-ray diffraction, chemical composition by energy-dispersive X-ray microanalysis, and imaging and measurement of crystal growth steps by atomic force microscopy-all identified and confirmed crystallographic parameters for COM and COD. Proteins binding to the crystals were identified by immunoblotting, revealing the presence of osteopontin and fetuin-A (alpha(2)HS-glycoprotein)--known regulators of crystal growth found in serum. Macrophage cell cultures exposed to calcium oxalate crystals showed internalization of the crystals by phagocytosis in a process that induced disruption of cell-cell adhesion, release of reactive oxygen species and membrane damage, events that may be linked to the release of inflammatory cytokines by these cells into the culture media. In conclusion, calcium oxalate crystals found in commercially available FBS are toxic to cells, and their presence may confound results from in vitro studies where, amongst others, phagocytosis, biomineralization, renal cell and molecular biology, and drug and biomaterial testing are being examined.

Comparative study of nanoscale surface structures of calcite microcrystals using FE-SEM, AFM, and TEM.

The bulk morphology and surface features that developed upon precipitation on micrometer-size calcite powders and millimeter-size cleavage fragments were imaged by three different microscopic techniques: field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) of Pt-C replicas, and atomic force microscopy (AFM). Each technique can resolve some nanoscale surface features, but they offer different ranges of magnification and dimensional resolutions. Because sample preparation and imaging is not constrained by crystal orientation, FE-SEM and TEM of Pt-C replicas are best suited to image the overall morphology of microcrystals. However, owing to the decoration effect of Pt-C on the crystal faces, TEM of Pt-C replicas is superior at resolving nanoscale surface structures, including the development of new faces and the different microtopography among nonequivalent faces in microcrystals, which cannot be revealed by FE-SEM. In conjunction with SEM, Pt-C replica provides the evidence that crystals grow in diverse and face-specific modes. The TEM imaging of Pt-C replicas has nanoscale resolution comparable to AFM. AFM yielded quantitative information (e.g., crystallographic orientation and height of steps) of microtopographic features. In contrast to Pt-C replicas and SEM providing three-dimensional images of the crystals, AFM can only image one individual cleavage or flat surface at a time.

Smooth muscle cells deficient in osteopontin have enhanced susceptibility to calcification in vitro.

OBJECTIVE: Vascular calcification is an actively regulated process, correlating with cardiovascular morbidity and mortality especially in patients with diabetes and chronic renal diseases. Osteopontin (OPN) is abundantly expressed in human calcified arteries and inhibits vascular calcification in vitro and in vivo. How OPN functions in vascular calcification, however, is less clear. METHODS: Smooth muscle cells (SMCs) were isolated from aortas of OPN knock-out (OPN-/-) and wild type (OPN+/+) mice. RESULTS: OPN-/- SMCs were identical to OPN+/+ SMCs in morphology and stained positively for SM lineage proteins, desmin, smooth muscle alpha-actin and SM22alpha. No spontaneous calcification was observed in OPN-/- SMCs under normal culture conditions or in medium containing 1%, 3%, or 5% fetal bovine serum. However, when cultured in medium containing elevated concentrations of inorganic phosphate, an inducer of vascular calcification, a significantly higher calcification was observed in OPN-/- SMCs compared to OPN+/+ SMCs that, in response to elevated phosphate, synthesized and secreted OPN into the culture. Finally, retroviral transduction of mouse OPN cDNA into OPN-/- SMCs rescued the calcification phenotype of the cells. CONCLUSION: These results are the first to demonstrate an inhibitory role of endogenously produced OPN on SMC calcification, suggesting a novel feedback mechanism where OPN produced locally by the SMCs may serve as an important inducible inhibitor of vascular calcification.