Polypyrrole-based adsorbents for Cr(VI) ions remediation from aqueous solution: a review.

Anthropogenic activities are principally responsible for the manifestation of toxic and carcinogenic hexavalent chromium (Cr(VI)) triggering water pollution that threatens the environment and human health. The World Health Organisation (WHO) restricts Cr(VI) ion concentration to 0.1 and 0.05 mg/L in inland surface water and drinking water, respectively. The available technologies for Cr(VI) ion removal from water were highlighted with an emphasis on the adsorption technology. Furthermore, the characteristics of several polypyrrole-based adsorbents were scrutinized including amino-containing compounds, biosorbents, graphene/graphene oxide, clay materials and many other additives with reported effective Cr(VI) ion uptake. This efficiency in Cr(VI) ions adsorption is attributed to enhanced redox properties, increased number of functional groups as well as the synergistic behaviour of the materials making up the composites. The Langmuir isotherm best described the adsorption processes with maximum adsorption capacities ranging from 3.40-961.50 mg/g. The regeneration of Cr(VI) ion-laden adsorbents was studied. Ion exchange, electrostatic attractions, complexation, chelation reactions with protonated sites and reduction were the mechanisms of adsorption. Nevertheless, there are limited details on comprehensive adsorbent regeneration studies to prolong robustness in adsorption-desorption cycles and utilization of the Cr(VI) ion-laden adsorbent in other areas of research to limit the threat of secondary pollution.

Removal of nickel(II) from aqueous solution by Vigna unguiculata (cowpea) pods biomass.

The potential to remove nickel(II) ions from aqueous solution using a biosorbent prepared from Vigna unguiculata pods (VUPs) was investigated in batch experiments. The batch mode experiments were conducted utilising the independent variables of pH (2 to 8), contact time (5 to 120 min), dosage concentration (0.2 to 1.6 g), nickel(II) concentrations (10 to 80 mg L(-1)) and temperature (20 to 50°C). The biosorption data fitted best to the Freundlich biosorption model with a correlation coefficient (R(2)) of 0.993 and lowest chi-squared value of 31.89. The maximum sorption capacity of the VUP for nickel(II) was 27.70 mg g(-1). Kinetics studies revealed that the biosorption process followed the pseudo-second-order model as it had the lowest sum of square error value (0.808) and correlation coefficient close to unity (R(2) = 0.998). The calculated thermodynamic parameters showed that the biosorption process was feasible, spontaneous and endothermic. Consequently, the study demonstrated that VUP biomass could be used as a biosorbent for the removal of nickel(II) from aqueous solution.