The impact of Cr adhesion layer on CNFET electrical characteristics.

The effect of a Cr adhesion layer on the transfer characteristics of Cr/Au-contacted carbon nanotube field-effect transistors (CNFETs) based on individual single-walled carbon nanotubes (SWNTs) is presented in this paper. We show that a very thin Cr layer (≈0.4 nm) already has an impact on the carrier transport in Schottky-barrier-modulated CNFETs. The ratio of the p- and n-branch current is reduced by eight times when the Cr adhesion layer thickness is increased from 0 to 8 nm. We suggest a change in Schottky barrier height at the contact as the determining mechanism for this result. Additionally, superior lifetime of devices is observed even for non-passivated CNFETs with preserved clean SWNT/Cr/Au-contacts using Cr layer thinner than 2 nm. Our experiments show that the role of the adhesion layer in metal/nanotube contacts should be explicitly considered when designing CNTFET-based circuits, developing CNFET fabrication processes, and analyzing the corresponding properties of the electrical contacts.

Advances in NO2 sensing with individual single-walled carbon nanotube transistors.

The charge carrier transport in carbon nanotubes is highly sensitive to certain molecules attached to their surface. This property has generated interest for their application in sensing gases, chemicals and biomolecules. With over a decade of research, a clearer picture of the interactions between the carbon nanotube and its surroundings has been achieved. In this review, we intend to summarize the current knowledge on this topic, focusing not only on the effect of adsorbates but also the effect of dielectric charge traps on the electrical transport in single-walled carbon nanotube transistors that are to be used in sensing applications. Recently, contact-passivated, open-channel individual single-walled carbon nanotube field-effect transistors have been shown to be operational at room temperature with ultra-low power consumption. Sensor recovery within minutes through UV illumination or self-heating has been shown. Improvements in fabrication processes aimed at reducing the impact of charge traps have reduced the hysteresis, drift and low-frequency noise in carbon nanotube transistors. While open challenges such as large-scale fabrication, selectivity tuning and noise reduction still remain, these results demonstrate considerable progress in transforming the promise of carbon nanotube properties into functional ultra-low power, highly sensitive gas sensors.