The efficiency of contraction in rabbit skeletal muscle fibres, determined from the rate of release of inorganic phosphate.

1. The relationship between mechanical power output and the rate of ATP hydrolysis was investigated in segments of permeabilized fibres isolated from rabbit psoas muscle. 2. Contractions were elicited at 12 degrees C by photolytic release of ATP from the P3 -1-(2-nitrophenyl) ester of ATP (NPE-caged ATP). Inorganic phosphate (Pi) release was measured by a fluorescence method using a coumarin-labelled phosphate binding protein. Force and sarcomere length were also monitored. 3. ATPase activity was determined from the rate of appearance of Pi during each phase of contraction. The ATPase rate was 10.3 s-1 immediately following release of ATP and 5. 1 s-1 during the isometric phase prior to the applied shortening. It rose hyperbolically with shortening velocity, reaching 18.5 s-1 at a maximal shortening velocity > 1 ML s-1 (muscle lengths s-1). 4. Sarcomeres shortened at 0.09 ML s-1 immediately following the photolytic release of ATP and at 0.04 ML s-1 prior to the period of applied shortening. The high initial ATPase rate may be largely attributed to initial sarcomere shortening. 5. During shortening, maximal power output was 28 W l-1. Assuming the free energy of hydrolysis is 50 kJ mol-1, the efficiency of contraction was calculated from the power output at each shortening velocity. The maximum efficiency was 0.36 at a shortening velocity of 0.27 ML s-1, corresponding to a force level 51 % of that in the isometric state. 6. At the maximal shortening velocity, only 10 % of the myosin heads are attached to the thin filaments at any one time.

The ATPase activity in isometric and shortening skeletal muscle fibres.

Muscle proteins utilise the hydrolysis of ATP to provide the energy for force development and the production of mechanical work. We have developed a technique with high sensitivity and time resolution to probe as directly as possible the link between ATPase activity, force development and muscle shortening. The ATPase activity was recorded in real time during contraction and shortening of permeabilised muscle fibres of rabbit skeletal muscle by measuring fluorescence changes associated with the binding of inorganic phosphate, a product of ATPase activity, to a genetically engineered phosphate binding protein labelled with a coumarin fluorophore. The muscle shortening velocity was found to affect directly the ATPase activity, with up to a five-fold increase during shortening at moderate velocities, and a decrease in activity during slow stretch.

ATPase kinetics on activation of rabbit and frog permeabilized isometric muscle fibres: a real time phosphate assay.

1. The rate of appearance of inorganic phosphate (Pi) and hence the ATPase activity of rabbit psoas muscle in single permeabilized muscle fibres initially in rigor was measured following laser flash photolysis of the P3-1-(2-nitrophenyl)ethyl ester of ATP (NPE-caged ATP) in the presence and absence of Ca2+. Pi appearance was monitored from the fluorescence signal of a Pi-sensitive probe, MDCC-PBP, a coumarin-labelled A197C mutant of the phosphate-binding protein from Escherichia coli. Fibres were immersed in oil to optimize the fluorescence signal and to obviate diffusion problems. The ATPase activity was also measured under similar conditions from the rate of NADH disappearance using an NADH-linked coupled enzyme assay. 2. On photolysis of NPE-caged ATP in the presence of Ca2+ at 20 degrees C, the fluorescence increase of MDCC-PBP was non-linear with time. ATPase activity was 41 s-1 in the first turnover based on a myosin subfragment 1 concentration of 150 microM. This was calculated from a linear regression of the fluorescence signal reporting 20-150 microM of Pi release. Tension was at 67% of its isometric level by the time 150 microM Pi was released. ATPase activities were 36 and 31 s-1 for Pi released in the ranges of 150-300 microM and 300-450 microM, respectively. The ATPase activity had a Q10 value of 2.9 based on measurements at 5, 12 and 20 degrees C. 3. An NADH-linked assay showed the ATPase activity had a lower limit of 12.7 s-1 at 20 degrees C. The response to photolytic release of ADP showed that the rate of NADH disappearance was partially limited by the flux through the coupled reactions. Simulations indicated that the linked assay data were consistent with an initial ATPase activity of 40 s-1. 4. On photolysis of NPE-caged ATP in the absence of Ca2+ the ATPase activity was 0.11 s-1 at 20 degrees C with no discernible rapid transient phase of Pi release during the first turnover of the ATPase. 5. To avoid the rigor state, the ATPase rate in the presence of Ca2+ was also measured on activation from the relaxed state by photolytic release of Ca2+ from a caged Ca2+ compound, nitrophenyl-EGTA. At 5 degrees C the ATPase rate was 5.8 and 4.0 s-1 in the first and second turnovers, respectively. These rates are comparable to those when NPE-caged ATP was used. 6. The influence of ADP and Pi on the ATPase activities was measured using the MDCC-PBP and NADH-linked assays, respectively. ADP (0.5 mM) decreased the initial ATPase rate by 23%. Pi (10 mM) had no significant effect. Inhibition by ADP, formed during ATP hydrolysis, contributed to the decrease of ATPase activity with time. 7. The MDCC-PBP assay and NPE-caged ATP were used to measure the ATPase rate in single permeabilized muscle fibres of the semitendinosus muscle of the frog. At 5 degrees C in the presence of Ca2+ the ATPase activity was biphasic being 15.0 s-1 during the first turnover (based on 180 microM myosin subfragment 1). Tension was 74% of its isometric level by the time 180 microM Pi was released. During the third turnover the ATPase rate decreased to about 20% of that during the first turnover. 8. ATPase activity in isometric rabbit muscle fibres during the first few turnovers is about an order of magnitude greater than that when a steady state is reached. Possible reasons and the consequences for understanding the mechanism of muscular contraction are discussed.

A new method for the time-resolved measurement of phosphate release in permeabilized muscle fibers.

A new method for the measurement of phosphate release in contracting and relaxed permeabilized muscle fibers is described. The assay is based on a genetically engineered phosphate-binding protein labeled with a coumarin fluorescent probe, which binds inorganic phosphate tightly and shows a fourfold increase in fluorescence upon binding. Measurements of Pi release on the millisecond time scale with sensitivity in the 10 microM range are obtained that provide new information about the relationship between ATP hydrolysis and force production.

Reversible structure transition in gap junction under Ca++ control seen by high-resolution electron microscopy.

Deoxycholate-extracted rat liver gap junction was studied by high-resolution low-dose electron microscopy. Communicating channels between two adjoining cells supposedly form along the common axis of two apposed hexameric trans-membrane protein assemblies. These double hexamers are often arranged in large plaques on an ordered hexagonal net (8-9 nm lattice constant) and seem able to undergo structural alteration as a possible permeability control mechanism. Calcium is widely reported to uncouple gap junction, and we observed this alteration on exposure to Ca++ down to 10(-4) M concentration. When EGTA was added at matching concentrations, the alteration was reversible several times over one hour, but with considerable variability. It was imaged in the absence of any negative stain to avoid ionic and other complications. The resulting lack of contrast plus low-dose "shot" noise required digital Fourier filtering and reconstruction, but no detail was recovered below 1.8 nm. In other experiments with negative stain at neutral pH, gap junction connexons were apparently locked in the "closed" configuration and no transition could be induced. However, recovery of repeating detail to nearly 1.0 nm was possible, reproducibly showing a fine connective matrix between connexons . Whether this was formed by unfolded portions of the 28,000-dalton gap junction protein is not known, but its existence could explain the observed lattice invariance during the connexon structural transition.

Combining accurate defocus with low-dose imaging in high resolution electron microscopy of biological material.

High resolution (less than 2 nm) electron microscopy of biological specimens requires three exacting conditions to be met simultaneously: (a) fine specimen detail must be protected from destruction by the electron beam (low dose), (b) the electron optics must be adjusted to be capable of imaging that detail interpretably (accurate defocus), and (c) a suitable field of interest must be identified. We describe a method encompassing all three with an 80% success rate using only minor modifications to a transmission electron microscope, and no expensive on-line computing.

Multiple image integration: a new method in electron microscopy.

An optical 'flicker' method is described for the precise azimuthal and translational co-registration of many noisy but identical molecular images. Starting with a real micrograph of known biological objects showing no visible detail below 4 nm, a lattice of images of individual objects was synthesized by computer and translationally filtered, using real experimental data throughout. Detail was recovered conforming with known structural features of the object down to about 1.5 nm, and rotational analysis showed that the registration accuracy of the lattice elements was better than 0.5 nm on the object. Application to the straightening of real two-dimensional lattices with long-range distortion is discussed.