Effects of UV filter 4-methylbenzylidene camphor during early development of Solea senegalensis Kaup, 1858.

The inclusion of organic UV filters in personal care products (PCPs) has increased in recent years. 4-Methylbenzylidene camphor (4MBC) is one of the most used UV filters, and thus it is commonly found in aquatic ecosystems, with proved negative effects on aquatic organisms. Effects on early life stages of marine vertebrates are largely unknown. Therefore, the main goal of this work was to evaluate 4MBC effects on Senegalese sole (Solea Senegalensis Kaup, 1858) larvae at different levels of biological organization. S. senegalensis were exposed to increasing concentrations of 4MBC from egg stage until 96 h. Mortality, growth, malformations, behaviour and biochemical responses, including enzymatic biomarkers were studied. The exposure to 4MBC until 96 h post-fertilization (hpf) induced mortality and malformations in a dose-response manner. Besides, reduced growth with increasing concentrations was observed. The exposure to 4MBC also caused alterations on behaviour, including overall lower swimming time during light and dark periods. Biomarker alterations caused by 4MBC included imbalance of neurotransmission related endpoints (increased acetylcholinesterase activity) and decreased activity of enzymes related to anaerobic metabolism (lower cellular lactate dehydrogenase activity) at the lower concentrations tested. Furthermore, our results suggest that 4MBC do not induce oxidative stress in S. senegalensis larvae, since catalase and lipid peroxidation levels were not significantly altered by 4MBC. S. senegalensis revealed to be a good model species for vertebrate animal testing in the marine environment. Sub-lethal concentrations of 4MBC induced toxic effects at all organizational levels. Swimming behaviour was a sensitive endpoint and showed that exposure to 4MBC causes impairment on response to light stimulus which is possibly linked with the observed imbalances on cholinesterase activity in larvae. Conservation concerns along distribution range of S. senegalensis should consider that increasing levels of UV filters in marine environment might have impact on the ecology of the species.

Determination of UV filters in both soluble and particulate fractions of seawaters by dispersive liquid-liquid microextraction followed by gas chromatography-mass spectrometry.

An analytical method to determine the total content (i.e., not only in the soluble fraction but also in the particulate one) of eight commonly used UV filters in seawater samples is presented for the first time. Dispersive liquid-liquid microextraction (DLLME) is used as microextraction technique to pre-concentrate the target analytes before their determination by gas chromatography-mass spectrometry (GC-MS). In order to release the UV filters from the suspended particles an ultrasound treatment is performed before DLLME. The ultrasound treatment time was studied in order to achieve a quantitative lixiviation of the target analytes. The type and volume of both disperser and extraction solvent, the sample volume, the pH and the ionic strength involved in the DLLME have been optimized to provide the best enrichment factors. Under the optimized conditions, the method was successfully validated showing good linearity, enrichment factors between 112 and 263 depending on the analyte, limits of detection and quantification in the low ng L(-1) range (10-30 ng L(-1) and 33-99 ng L(-1), respectively) and good intra- and inter-day repeatability (RSD <15%). No significant matrix effects were found. Finally, the method was satisfactorily applied to the analysis of three seawater samples from different origin. Results showed significant amounts of UV filters in the particulate fraction that would have been ignored if only the soluble fraction had been considered. This fact shows that the UV filters are also accumulated in the suspended particles contained in water, what should be taken into account from an environmental standpoint.

Dispersive liquid-liquid microextraction followed by gas chromatography-mass spectrometry for the determination of nitro musks in surface water and wastewater samples.

A new, simple, fast and high sensitive analytical method based on dispersive liquid-liquid microextraction (DLLME) followed by gas chromatography-mass spectrometry (GC-MS) for the simultaneous determination of nitro musks in surface water and wastewater samples is presented. Different parameters, such as the nature and volume of both the extraction and disperser solvents and the ionic strength and pH of the aqueous donor phase, were optimized. Under the selected conditions (injection of a mixture of 1 mL of acetone as disperser solvent and 50 µL of chloroform as extraction solvent, no salt addition and no pH adjustment) the figures of merit of the proposed DLLME-GC-MS method were evaluated. High enrichment factors, ranging between 230 and 314 depending on the target analyte, were achieved, which redound to limits of detection in the ng L(-1) range (i.e., 4-33 ng L(-1)). The relative standard deviation (RSD) was below 5% for all the target analytes. Finally, the recoveries obtained for different water samples of diverse origin (sea, river, irrigation channel and water treatment plant) ranged between 87 and 116%, thus showing no matrix effects.

A simple novel configuration for in-vial microporous membrane liquid-liquid extraction.

A novel arrangement for microporous membrane liquid-liquid extraction from the aqueous donor phase to the organic acceptor phase within a micro-vial, which is compatible with the chromatograph autosampler is presented. The device consisted of a stoppered glass micro-vial containing the organic solvent where the septum of the screw stopper was replaced by a sized piece of membrane which is hermetically assembled to the volumetric flask containing the aqueous donor solution. The placement of the membrane in alternative contact with the solutions was achieved by orbital agitation. As a preliminary study, 2-ethylhexyl 4-(dimethylamino)benzoate has been determined (limit of quantification 0.11 microg L(-1), precision 7.4%). The small quantity of organic solvent used, the achieved sample cleanup, and the minimal handling and risk of cross-contamination are significant operational advantages.

A solid-phase extraction and size-exclusion liquid chromatographic method for polyethylene glycol 25 p-aminobenzoic acid determination in urine: validation for urinary excretion studies of users of sunscreens.

No previous publications about percutaneous absorption of polyethylene glycol 25 p-aminobenzoic acid (PEG-25 PABA) have been found in the literature and the expected levels to be found in human urine after sunscreens use are unknown. The method proposed here is suitable to determine PEG-25 PABA in the urine of sunscreens users in order to carry out studies on body accumulation/excretion. It is based on solid-phase extraction (SPE) with size-exclusion liquid chromatography determination. Solid-phase extraction allows the analyte to be retained and subsequently eluted for a clean-up, using a silica-based cartridge. The size-exclusion liquid chromatography of the eluted allows the rest of matrix interferences to be avoided. Fluorescence intensity was measured at lambda(em)=350 nm (lambda(exc)=300 nm). The sensitivity of the proposed method is in the order of 450+/-5 mLng(-1) and the detection limit (3S(y/x)/b) in the measured solutions is in the order of 13 ngmL(-1), that is 2.6 ngmL(-1) in urine samples. The method enables PEG-25 PABA to be determined in both, spiked and unspiked human urine samples. Results obtained for spiked human urine samples (11-100 ngmL(-1)) demonstrated the accuracy of the method. The mean relative standard deviation of the results was in the order of 3-10%. Three volunteers applied a sunscreen lotion containing a 8% PEG-25 PABA sunscreen cream and their urinary excretion was controlled from the moment of application until the excreted amounts were no longer detectable.

A reversed-phase ion-interaction chromatographic method for in-vitro estimation of the percutaneous absorption of water-soluble UV filters.

An analytical method based on ion-interaction chromatography with UV detection for simultaneous in-vitro estimation of the percutaneous absorption of the most used water-soluble UV filters in sunscreen cosmetics is proposed. These UV filters were phenylbenzimidazole sulfonic acid, disodium phenyl dibenzimidazole tetrasulfonate, benzophenone-4, and terephthalylidene dicamphor sulfonic acid. The methodology is based on applying the sunscreen containing the target UV filters to human epidermis in a diffusion cell. Analytes are determined in the receptor solution. To ensure skin integrity, screening of the cells was carried out by analytical determination of a marker. Analytical variables such as percentage ethanol, concentration of ion-pairing agent, pH of the mobile phase, and temperature were studied in order to achieve high resolution of the chromatographic peaks in the lowest possible time of analysis. The conditions selected consisted of a mobile phase composed of 35:65 (v/v) ethanol-ammonium acetate buffer solution (pH 4, containing 50 mmol L(-1) tetra-n-butylammonium bromide). The chromatographic determination was carried out with the analytical column at 50 degrees C. UV detection was carried out at the maximum absorption wavelength for each analyte. The limit of detection (3s(y/x)/b) ranged from 16 to 65 ng mL(-1), depending on the analyte.

A liquid chromatography-fluorimetric method for the in vitro estimation of the skin penetration of disodium phenyldibenzimidazole tetrasulfonate from sunscreen formulations through human skin.

Disodium phenyldibenzimidazole tetrasulfonate (PDT) is a new organic UV filter with hydrophilic properties used in modern sunscreen spray formulations. The aim of this work was to develop and validate an analytical method that can be used to study skin absorption of PDT from sunscreens. Results obtained in vitro for human skin showed a low level of absorption. The proposed in vitro method employs a diffusion cell. Sunscreen lotion was applied onto pretreated human skin, which was then placed in the cell. PDT was collected in a receptor liquid, the surface of which was in contact with the skin. The solutions obtained were diluted appropriately and analyzed by liquid chromatography without any interference. The analytical features of chromatographic determination with fluorimetic detection were suited to this analytical problem, since this method gave a limit of detection of 1 ng ml(-1). Phenol red (PR) was used as a marker to check the skin integrity, and a sensitive method based on sequential injection on-line solid-phase extraction coupled with spectrophotometric detection was developed for determining this marker in the receptor liquid in order to screen the cells.

Sequential-injection determination of traces of disodium phenyl dibenzimidazole tetrasulphonate in urine from users of sunscreens by on-line solid-phase extraction coupled with a fluorimetric detector.

A sensitive and selective method to determine disodium phenyl dibenzimidazole tetrasulphonate (PDT) in the urine of sunscreen users, which is suitable for studies on body accumulation/excretion is proposed. On-line solid-phase extraction allows the analyte to be retained and subsequentely eluted, using a strong anion exchange (SAX) microcolumn. Standard addition calibration was carried out with only one standard. The wavelengths of excitation and emission were 330 and 454 nm, respectively. The method allows PDT to be determined in both, spiked and unspiked human urine samples, without any pre-treatment. Results obtained for spiked urine samples (40-200 ng ml(-1)) showed the accuracy of the method. The mean relative standard deviations (R.S.D.) of the results was 7%. Five volunteers applied a sunscreen lotion containing 5% PDT and their urinary excretion was controlled from the moment of application until the excreted amounts were no longer detectable. The sensitivity of the proposed method is in the order of 1900 ml microg(-1) and the detection limit (3S(y/x)/b) is in the order of 5 ng of PDT, which means 10 ng ml(-1) for a 500 microl injected volume, and this is suitable for the PDT levels found in the urine.

Determination of butyl methoxydibenzoylmethane, benzophenone-3, octyl dimethyl PABA and octyl methoxycinnamate in lipsticks.

The complex composition of lipstick formulations usually needs the use of organic solvents for sample dissolution. A treatment based on dissolution of cosmetic samples in ethanol-water (70 : 30, v/v) by use of ultrasonic irradiation is proposed. A C(18) stationary phase and an isocratic mobile phase of ethanol:water:acetic acid (70 : 29.5 : 0.5, v/v/v) with a flow rate of 1 mL min(-1) and an injection volume of 20 microL is proposed for the high-pressure liquid chromatography (HPLC) determination of four UV-filters, and detection was carried out at 309 nm. The limit of the chromatographic detection was 7.0 microg mL(-1) for butyl methoxydibenzoylmethane, 1.5 microg mL(-1) for benzophenone-3, 1.4 microg mL(-1) for octyl dimethyl p-aminobenzoic acid (octyl dimethyl PABA) and 2.7 microg mL(-1) for octyl methoxycinnamate. The relative standard deviations of the results were between 1.8 and 2.4%. The results were comparable to those obtained by a procedure based on the use of tetrahydrofuran. The method can be considered as a green analytical procedure because it only requires the use of small quantities of ethanol.

Sensitive sequential-injection system for the determination of 2-phenylbenzimidazole-5-sulphonic acid in human urine samples using on-line solid-phase extraction coupled with fluorimetric detection.

2-Phenylbenzimidazole-5-sulphonic acid (PBS) is an UV-filter contained in many cosmetics as a sunscreen. A direct, selective and sensitive method to determine traces of PBS is presented. The on-line separation of this compound from urine matrix was directly coupled with fluorimetric detection in a sequential-injection system. The separation was performed using a SAX microcolumn in which the analyte was retained and eluted selectively. The determination is carried out without any derivatization reaction, by directly measuring the intrinsic fluorescence of the analyte. The wavelengths of excitation and emission were 301 and 681 nm, respectively. On-line standard addition calibration is performed into the system, and only one standard solution is required. The limit of detection was 12 ng ml(-1). The method was satisfactorily used to determine PBS in both, spiked and unspiked human urine samples, without any pretreatment. The relative standard deviations of the results were in the order of 2-13%. The concentrations of the analyte obtained for unspiked samples taken from sunscreen users were higher than the limit of detection.

Sequential injection spectrophotometric determination of oxybenzone in lipsticks.

A sequential injection (SI) procedure for the spectrophotometric determination of oxybenzone in lipsticks is reported. The colorimetric reaction between nickel and oxybenzone was used. SI parameters such as sample solution volume, reagent solution volume, propulsion flow rate and reaction coil length were studied. The limit of detection was 3 microg ml(-1). The sensitivity was 0.0108+/-0.0002 ml microg(-1). The relative standard deviations of the results were between 6 and 12%. The real concentrations of samples and the values obtained by HPLC were comparable. Microwave sample pre-treatment allowed the extraction of oxybenzone with ethanol, thus avoiding the use of toxic organic solvents. Ethanol was also used as carrier in the SI system. Seventy-two injections per hour can be performed, which means a sample frequency of 24 h(-1) if three replicates are measured for each sample.

Determination of the UV filters worldwide authorised in sunscreens by high-performance liquid chromatography. Use of cyclodextrins as mobile phase modifier.

Simultaneous determination of organic UV filters worldwide authorised in sunscreen formulations was performed by HPLC with UV spectrophotometric detection. The filters determined were: benzophenone-4, benzophenone-3, butyl methoxydibenzoylmethane, octyl dimethyl PABA, octyl methoxycinnamate, homosalate and octyl salicylate. A C18 stationary phase and an isocratic mobile phase of ethanol-water-acetic acid (70:29.5:0.5) containing 65.4 mM of hydroxypropyl-beta-cyclodextrin, were used with a flow-rate of 0.6 ml/min. UV measurements were carried out at 313 nm. The time required for the analysis was 20 min and the limits of detection were between 1.5 and 2.3 mg/l. The procedure proposed provides a green analytical method with a basic instrumental configuration, it is fast and accurate and does not involve highly toxic organic solvents.

Determination of UV-filters in sunscreens by HPLC.

Simultaneous determination of six internationally authorised organic UV-filters in sunscreen formulations was performed by HPLC with UV spectrophotometric detection. The filters determined were: sulisobenzone, oxybenzone, octyl dimethyl PABA, octyl methoxycinnamate, octyl salicylate and homosalate. A C18 stationary phase and a mobile phase of ethanol water acetic acid (70:29.5:0.5) were used with a flow rate of 0.5 mL/min. UV measurements were carried out at 313 nm. The time required for the analysis was 25 min and the limits of detection were between 0.2 and 2 mg/L, except for sulisobenzone, which gave a limit of detection of 20 mg/L. The procedure proposed provides an accurate, fast and green analytical method, that does not involve toxic organic solvents.

Efficient flow injection and sequential injection methods for spectrophotometric determination of oxybenzone in sunscreens based on reaction with Ni(II).

Spectrophotometric determination of a widely used UV-filter, such as oxybenzone, is proposed. The method is based on the complexation reaction between oxybenzone and Ni(II) in ammoniacal medium. The stoichiometry of the reaction, established by the Job method, was 1:1. Reaction conditions were studied and the experimental parameters were optimized, for both flow injection (FI) and sequential injection (SI) determinations, with comparative purposes. Sunscreen formulations containing oxybenzone were analyzed by the proposed methods and results compared with those obtained by HPLC. Data show that both FI and SI procedures provide accurate and precise results. The ruggedness, sensitivity and LOD are adequate to the analysis requirements. The sample frequency obtained by FI is three-fold higher than that of SI analysis. SI is less reagent-consuming than FI.

Determination of selenium, zinc and cadmium in antidandruff shampoos by atomic spectrometry after microwave assisted sample digestion.

Microwave assisted pre-treatments for atomic spectrometric determination (inductive coupled plasma-optical emission spectrometry, ICP-OES or flame atomic absorption spectrometry, FAAS) of metallic elements, usually present in antidandruff shampoos, are proposed. They are based on the digestion of the sample with HNO(3) into a closed reactor, which is irradiated at 800 W for a few minutes. Selenium was determined by ICP-OES. The limit of detection was 0.11 mg l(-1); the relative standard deviation (R.S.D.) for the selenium content in the samples was in the 0.6-3.6% range. The results obtained were in agreement with the label contents and the recovery of the proposed method was in the 100-106% range. Zinc and cadmium were determined by FAAS. The limit of detection for zinc determination was 0.078 mg l(-1); the R.S.D. for zinc contents was in the 0.8-8.6% range. A limit of detection of 0.09 mg l(-1) was obtained for cadmium determination; the R.S.D. for cadmium contents was in the 0.7-2.7% range. The determinations were performed after two different sample mineralization pre-treatments - dry ashing (in an electric furnace) and wet mineralization (in a microwave oven). Both methodologies provided comparable results for zinc and cadmium determination in shampoos. The proposed microwave assisted digestion procedures allow a precise and accurate determination of selenium, zinc and cadmium in commercial antidandruff shampoos, and the sample pre-treatment is less time-consuming than the classic methods.