Enhanced theanine production with reduced ATP supply by alginate entrapped Escherichia coli co-expressing γ-glutamylmethylamide synthetase and polyphosphate kinase.

L-theanine is an amino acid with a unique flavor and many therapeutic effects. Its enzymatic synthesis has been actively studied and γ-Glutamylmethylamide synthetase (GMAS) is one of the promising enzymes in the biological synthesis of theanine. However, the theanine biosynthetic pathway with GMAS is highly ATP-dependent and the supply of external ATP was needed to achieve high concentration of theanine production. As a result, this study aimed to investigate polyphosphate kinase 2 (PPK2) as ATP regeneration system with hexametaphosphate. Furthermore, the alginate entrapment method was employed to immobilize whole cells containing both gmas and ppk2 together resulting in enhanced reusability of the theanine production system with reduced supply of ATP. After immobilization, theanine production was increased to 239 mM (41.6 g/L) with a conversion rate of 79.7% using 15 mM ATP and the reusability was enhanced, maintaining a 100% conversion rate up to the fifth cycles and 60% of conversion up to eighth cycles. It could increase long-term storage property for future uses up to 35 days with 75% activity of initial activity. Overall, immobilization of both production and cofactor regeneration system could increase the stability and reusability of theanine production system.

Strategy for efficiently utilizing Escherichia coli cells producing isobutanol by combining isobutanol and indigo production systems.

Isobutanol is a potential biofuel, and its microbial production systems have demonstrated promising results. In a microbial system, the isobutanol produced is secreted into the media; however, the cells remaining after fermentation cannot be used efficiently during the isobutanol recovery process and are discarded as waste. To address this, we aimed to investigate the strategy of utilizing these remaining cells by combining the isobutanol production system with the indigo production system, wherein the product accumulates intracellularly. Accordingly, we constructed E. coli systems with genes, such as acetolactate synthase gene (alsS), ketol-acid reductoisomerase gene (ilvC), dihydroxyl-acid dehydratase (ilvD), and alpha-ketoisovalerate decarboxylase gene (kivD), for isobutanol production and genes, such as tryptophanase gene (tnaA) and flavin-containing monooxygenase gene (FMO), for indigo production. This system produced isobutanol and indigo simultaneously while accumulating indigo within cells. The production of isobutanol and indigo exhibited a strong linear correlation up to 72 h of production time; however, the pattern of isobutanol and indigo production varied. To our knowledge, this study is the first to simultaneously produce isobutanol and indigo and can potentially enhance the economy of biochemical production.

Enhanced production of bio-indigo in engineered Escherichia coli, reinforced by cyclopropane-fatty acid-acyl-phospholipid synthase from psychrophilic Pseudomonas sp. B14-6.

Indigo dye is an organic compound with a distinctive blue color. Most of the indigo currently used in industry is produced via chemical synthesis, which generates a large amount of wastewater. Therefore, several studies have recently been conducted to find ways to produce indigo eco-friendly using microorganisms. Here, we produced indigo using recombinant Escherichia coli with both an indigo-producing plasmid and a cyclopropane fatty acid (CFA)-regulating plasmid. The CFA-regulating plasmid contains the cfa gene, and its expression increases the CFA composition of the phospholipid fatty acids of the cell membrane. Overexpression of cfa showed cytotoxicity resistance of indole, an intermediate product formed during the indigo production process. This had a positive effect on indigo production and cfa originated from Pseudomonas sp. B 14-6 was used. Optimal conditions for indigo production were determined by adjusting the expression strain, culture temperature, shaking speed, and isopropyl ß-D-1-thiogalactopyranoside concentration. Treatment with Tween 80 at a particular concentration to increase the permeability of the cell membrane had a positive effect on indigo production. The strain with the CFA plasmid produced 4.1 mM of indigo after 24 h of culture and produced 1.5-fold higher indigo than the control strain without the CFA plasmid that produced 2.7 mM.

Unraveling Biohydrogen Production and Sugar Utilization Systems in the Electricigen Shewanella marisflavi BBL25.

Identification of novel, electricity-producing bacteria has garnered remarkable interest because of the various applications of electricigens in microbial fuel cell and bioelectrochemical systems. Shewanella marisflavi BBL25, an electricity-generating microorganism, uses various carbon sources and shows broader sugar utilization than the better-known S. oneidensis MR-1. To determine the sugar-utilizing genes and electricity production and transfer system in S. marisflavi BBL25, we performed an in-depth analysis using whole-genome sequencing. We identified various genes associated with carbon source utilization and the electron transfer system, similar to those of S. oneidensis MR-1. In addition, we identified genes related to hydrogen production systems in S. marisflavi BBL25, which were different from those in S. oneidensis MR-1. When we cultured S. marisflavi BBL25 under anaerobic conditions, the strain produced 427.58 ± 5.85 µl of biohydrogen from pyruvate and 877.43 ± 28.53 µl from xylose. As S. oneidensis MR-1 could not utilize glucose well, we introduced the glk gene from S. marisflavi BBL25 into S. oneidensis MR-1, resulting in a 117.35% increase in growth and a 17.64% increase in glucose consumption. The results of S. marisflavi BBL25 genome sequencing aided in the understanding of sugar utilization, electron transfer systems, and hydrogen production systems in other Shewanella species.

Algal biochar mediated detoxification of plant biomass hydrolysate: Mechanism study and valorization into polyhydroxyalkanoates.

In this study, fourteen types of biochar produced using seven biomasses at temperatures 300 °C and 600 °C were screened for phenolics (furfural and hydroxymethylfurfural (HMF)) removal. Eucheuma spinosum biochar (EB-BC 600) showed higher adsorption capacity to furfural (258.94 ± 3.2 mg/g) and HMF (222.81 ± 2.3 mg/g). Adsorption kinetics and isotherm experiments interpreted that EB-BC 600 biochar followed the pseudo-first-order kinetic and Langmuir isotherm model for both furfural and HMF adsorption. Different hydrolysates were detoxified using EB-BC 600 biochar and used as feedstock for engineered Escherichia coli. An increased polyhydroxyalkanoates (PHA) production with detoxified barley biomass hydrolysate (DBBH: 1.71 ± 0.07 g PHA/L), detoxified miscanthus biomass hydrolysate (DMBH: 0.87 ± 0.03 g PHA/L) and detoxified pine biomass hydrolysate (DPBH: 1.28 ± 0.03 g PHA/L) was recorded, which was 2.8, 6.4 and 3.4 folds high as compared to undetoxified hydrolysates. This study reports the mechanism involved in furfural and HMF removal using biochar and valorization of hydrolysate into PHA.

Enhancement of polyhydroxybutyrate production by introduction of heterologous phasin combination in Escherichia coli.

Phasin is a surface-binding protein of polyhydroxyalkanoate (PHA) granules that is encoded by the phaP gene. As its expression increases, PHA granules become smaller, to increase their surface area, and are densely packed inside the cell, thereby increasing the PHA content. A wide range of PHA-producing bacteria have phaP genes; however, their PHA productivity differs, although they are derived from the cognate bacterial host cell. Modulating phasin expression could be a new strategy to enhance PHA production. This study aimed to characterize the effect of heterologous phasins on the reconstitution of E. coli BL21(DE3) and determine the best synergistic phaP gene combination to produce polyhydroxybutyrate (PHB). We identified novel phasins from a PHB high-producer strain, Halomonas sp. YLGW01, and introduced a combination of phaP genes into Escherichia coli. The resulting E. coli phaP1,3 strain had enhanced PHB production by 2.9-fold, leading to increased cell mass and increased PHB content from 48 % to 65 %. This strain also showed increased tolerance to inhibitors, such as furfural and vanillin, enabling the utilization of lignocellulose biosugar as a carbon source. These results suggested that the combination of phaP1 and phaP3 genes from H. sp. YLGW01 could increase PHB production and robustness.

Finding of Novel Galactose Utilizing Halomonas sp. YK44 for Polyhydroxybutyrate (PHB) Production.

Polyhydroxybutyrate (PHB) is a biodegradable bioplastic with potential applications as an alternative to petroleum-based plastics. However, efficient PHB production remains difficult. The main cost of PHB production is attributed to carbon sources; hence, finding inexpensive sources is important. Galactose is a possible substrate for polyhydroxyalkanoate production as it is abundant in marine environments. Marine bacteria that produce PHB from galactose could be an effective resource that can be used for efficient PHB production. In this study, to identify a galactose utilizing PHB producer, we examined 16 Halomonas strains. We demonstrated that Halomonas cerina (Halomonas sp. YK44) has the highest growth and PHB production using a culture media containing 2% galactose, final 4% NaCl, and 0.1% yeast extract. These culture conditions yielded 8.98 g/L PHB (78.1% PHB content (w/w)). When galactose-containing red algae (Eucheuma spinosum) hydrolysates were used as a carbon source, 5.2 g/L PHB was produced with 1.425% galactose after treatment with activated carbon. Since high salt conditions can be used to avoid sterilization, we examined whether Halomonas sp. YK44 could produce PHB in non-sterilized conditions. Culture media in these conditions yielded 72.41% PHB content. Thus, Halomonas sp. YK44 is robust against contamination, allowing for long-term culture and economical PHB production.

Acceleration of Polybutylene Succinate Biodegradation by Terribacillus sp. JY49 Isolated from a Marine Environment.

Polybutylene succinate (PBS) is a bioplastic substitute for synthetic plastics that are made from petroleum-based products such as polyethylene and polypropylene. However, the biodegradation rate of PBS is still low and similar to that of polylactic acid (PLA). Moreover, our knowledge about degrader species is limited to a few fungi and mixed consortia. Here, to identify a bacterial degrader to accelerate PBS degradation, we screened and isolated Terribacillus sp. JY49, which showed significant degradability. In order to optimize solid and liquid culture conditions, the effect of factors such as temperature, additional carbon sources, and salt concentrations on degradation was confirmed. We observed a degradation yield of 22.3% after 7 days when adding 1% of glucose. Additionally, NaCl was added to liquid media, and degradation yield was decreased but PBS films were broken into pieces. Comparing the degree of PBS degradation during 10 days, the degradation yield was 31.4% after 10 days at 30 °C. Alteration of physical properties of films was analyzed by using scanning electron microscopy (SEM), gel permeation chromatography (GPC), and Fourier transform infrared (FT-IR). In addition, Terribacillus sp. JY49 showed clear zones on poly(butylene adipate-co-terephthalate) (PBAT), polycaprolactone (PCL), and copolymers such as P(3HB-co-3HV) and P(3HV-co-4HB), exhibiting a broad spectrum of degradation activities on bioplastics. However, there was no significant difference in absorbance when esterase activity was examined for different types of bioplastics. Overall, Terribacillus sp. JY49 is a potential bacterial strain that can degrade PBS and other bioplastics, and this is the first report of Terribacillus sp. as a bioplastic degrader.

Controlling catabolite repression for isobutanol production using glucose and xylose by overexpressing the xylose regulator.

Using lignocellulosic biomass is immensely beneficial for the economical production of biochemicals. However, utilizing mixed sugars from lignocellulosic biomass is challenging because of bacterial preference for specific sugar such as glucose. Although previous studies have attempted to overcome this challenge, no studies have been reported on isobutanol production from mixed sugars in the Escherichia coli strain. To overcome catabolite repression of xylose and produce isobutanol using mixed sugars, we applied the combination of three strategies: (1) deletion of the gene for the glucose-specific transporter of the phosphotransferase system (ptsG); (2) overexpression of glucose kinase (glk) and glucose facilitator protein (glf); and (3) overexpression of the xylose regulator (xylR). xylR gene overexpression resulted in 100% of glucose and 82.5% of xylose consumption in the glucose-xylose mixture (1:1). Moreover, isobutanol production increased by 192% in the 1:1 medium, equivalent to the amount of isobutanol produced using only glucose. These results indicate the effectiveness of xylR overexpression in isobutanol production. Our findings demonstrated various strategies to overcome catabolite repression for a specific product, isobutanol. The present study suggests that the selected strategy in E. coli could overcome the major challenge using lignocellulosic biomass to produce isobutanol.

Finding a Benign Plasticizer to Enhance the Microbial Degradation of Polyhydroxybutyrate (PHB) Evaluated by PHB Degrader Microbulbifer sp. SOL66.

As a biodegradable plastic, polyhydroxybutyrate (PHB) has relatively poor mechanical properties, preventing its wider use. Various plasticizers have been studied to improve the mechanical properties of PHB; however, due to the slow degradation speed in the soil environment and lack of evaluation methods, studies on the degradation of PHB with plasticizers are rarely reported. In this study, by applying Microbulbifer sp. SOL66, which is able to degrade PHB very quickly, a benign plasticizer was evaluated with good properties and good degradability, not inhibiting microbial activities. Eight different plasticizers were applied with PHB and Microbulbifer sp. SOL66, PHB film containing 10% and 20% tributyl citrate showed significant biodegradability of PHB. It was confirmed that tributyl citrate could increase the speed of PHB degradation by Microbulbifer sp. SOL66 by 88% at 1 day, although the degree of degradation was similar after 3 days with and without tributyl citrate. By the analysis of microbial degradation, physical, chemical, and mechanical properties, tributyl citrate was shown not only to improve physical, chemical, and mechanical properties but also the speed of microbial degradation.

Enhanced tolerance of Cupriavidus necator NCIMB 11599 to lignocellulosic derived inhibitors by inserting NAD salvage pathway genes.

Polyhydroxybutyrate (PHB) is a bio-based, biodegradable and biocompatible plastic that has the potential to replace petroleum-based plastics. Lignocellulosic biomass is a promising feedstock for industrial fermentation to produce bioproducts such as polyhydroxybutyrate (PHB). However, the pretreatment processes of lignocellulosic biomass lead to the generation of toxic byproducts, such as furfural, 5-HMF, vanillin, and acetate, which affect microbial growth and productivity. In this study, to reduce furfural toxicity during PHB production from lignocellulosic hydrolysates, we genetically engineered Cupriavidus necator NCIMB 11599, by inserting the nicotine amide salvage pathway genes pncB and nadE to increase the NAD(P)H pool. We found that the expression of pncB was the most effective in improving tolerance to inhibitors, cell growth, PHB production and sugar consumption rate. In addition, the engineered strain harboring pncB showed higher PHB production using lignocellulosic hydrolysates than the wild-type strain. Therefore, the application of NAD salvage pathway genes improves the tolerance of Cupriavidus necator to lignocellulosic-derived inhibitors and should be used to optimize PHB production.

Coproduction of exopolysaccharide and polyhydroxyalkanoates from Sphingobium yanoikuyae BBL01 using biochar pretreated plant biomass hydrolysate.

Sphingobium yanoikuyae BBL01 can produce exopolysaccharides (EPS) and polyhydroxyalkanoates (PHAs). The effect of side products (furfural, hydroxymethylfurfural (HMF), vanillin, and acetate) produced during pretreatment of biomass was evaluated on S. yanoikuyae BBL01. It was observed that a certain concentration range (0.01-0.03 %) of these compounds can improve growth, EPS production, and polyhydroxybutyrate (PHB) accumulation. The addition of HMF increases glucose and xylose utilization while other side products have a negative effect. The C/N of 5 favors EPS production (3.24 ± 0.05 g/L), while a higher C/N ratio of 30 promotes PHB accumulation (38.7 ± 0.08 % w/w), when commercial sugar is used as a carbon source. Pine biomass-derived biochar was able to remove 40 ± 2.1 % of total phenolic. Various biomass hydrolysates were evaluated and the use of detoxified pine biomass hydrolysate (DPH) as a carbon source resulted in the higher coproduction of EPS (2.83 ± 0.03 g/L) and PHB (40.8 ± 2.4 % w/w).

Simultaneous monitoring of each component on degradation of blended bioplastic using gas chromatography-mass spectrometry.

The increasing interest in bioplastics, with regard to future environmental issues, has rendered research on bioplastic biodegradation highly important. However, only a few tools directly monitor the degradation of bioplastics without measuring the levels of gaseous products, such as carbon dioxide. Classical nonquantitative methods, such as clear zone tests on solid plates, and less-sensitive weight-loss experiments in liquid media measured using a precision scale, are still employed to screen the microbial players associated with bioplastic degradation and monitor the biodegradation rates. However, the simultaneous monitoring of the degradation of each component of blended bioplastics has not been previously reported. In the present study, to provide information regarding the degradation rates and compositional changes of different bioplastics in a blend in a time-dependent manner, we simultaneously monitored and quantified the degradation of four bioplastics, polyhydroxybutyrate (PHB), polybutylene succinate (PBS), polycaprolactone (PCL), and poly(butylene adipate-co-terephthalate) (PBAT), by Bacillus sp. JY36 using gas chromatography-mass spectrometry (GC-MS) analysis after fatty acid methyl ester (FAME) derivatization. Our results demonstrate the feasibility of using the GC-MS-based method described here to obtain comprehensive data regarding blended bioplastics and their degradation. Moreover, our findings indicate that this method may support classical analytic tools for assessing bioplastic biodegradation.

Leucyl-tRNA Synthetase Inhibitor, D-Norvaline, in Combination with Oxacillin, Is Effective against Methicillin-Resistant Staphylococcus aureus.

Methicillin-resistant Staphylococcus aureus (MRSA) is a pathogenic bacterium that causes severe diseases in humans. For decades, MRSA has acquired substantial resistance against conventional antibiotics through regulatory adaptation, thereby posing a challenge for treating MRSA infection. One of the emerging strategies to combat MRSA is the combinatory use of antibacterial agents. Based on the dramatic change in phospholipid fatty acid (PLFA) composition of MRSA in previous results, this study investigated branched-chain amino acid derivatives (precursors of fatty acid synthesis of cell membrane) and discovered the antimicrobial potency of D-norvaline. The compound, which can act synergistically with oxacillin, is among the three leucine-tRNA synthetase inhibitors with high potency to inhibit MRSA cell growth and biofilm formation. PLFA analysis and membrane properties revealed that D-norvaline decreased the overall amount of PLFA, increasing the fluidity and decreasing the hydrophobicity of the bacterial cell membrane. Additionally, we observed genetic differences to explore the response to D-norvaline. Furthermore, deletion mutants and clinically isolated MRSA strains were treated with D-norvaline. The study revealed that D-norvaline, with low concentrations of oxacillin, was effective in killing several MRSA strains. In summary, our findings provide a new combination of aminoacyl-tRNA synthetase inhibitor D-norvaline and oxacillin, which is effective against MRSA.

4-Chloro-2-Isopropyl-5-Methylphenol Exhibits Antimicrobial and Adjuvant Activity against Methicillin-Resistant Staphylococcus aureus.

Methicillin-resistant Staphylococcus aureus (MRSA) causes severe infections and poses a global healthcare challenge. The utilization of novel molecules which confer synergistical effects to existing MRSA-directed antibiotics is one of the well-accepted strategies in lieu of de novo development of new antibiotics. Thymol is a key component of the essential oil of plants in the Thymus and Origanum genera. Despite the absence of antimicrobial potency, thymol is known to inhibit MRSA biofilm formation. However, the anti-MRSA activity of thymol analogs is not well characterized. Here, we assessed the antimicrobial activity of several thymol derivatives and found that 4-chloro-2-isopropyl-5-methylphenol (chlorothymol) has antimicrobial activity against MRSA and in addition it also prevents biofilm formation. Chlorothymol inhibited staphyloxanthin production, slowed MRSA motility, and altered bacterial cell density and size. This compound also showed a synergistic antimicrobial activity with oxacillin against highly resistant S. aureus clinical isolates and biofilms associated with these isolates. Our results demonstrate that chlorinated thymol derivatives should be considered as a new lead compound in anti-MRSA therapeutics.

Finding of novel polyhydroxybutyrate producer Loktanella sp. SM43 capable of balanced utilization of glucose and xylose from lignocellulosic biomass.

Polyhydroxybutyrate (PHB) is a potential substitute for plastics derived from fossil fuels, owing to its biodegradable and biocompatible properties. Lignocellulosic biomass could be used to reduce PHB production costs; however, the co-utilization of sugars, such as glucose and xylose, without catabolite repression is a difficult problem to be solved. Here, we selected a novel Loktanella sp. SM43 from a marine environment and optimized the conditions for PHB production. Loktanella sp. SM43 showed high PHB production (66.5% content) from glucose. When glucose and xylose were used together, this strain showed high utilization of both substrates compared to other high PHB-producers such as Halomonas sp. and Cupriavidus necator, which showed glucose preference. Loktanella sp. SM43 showed high growth and PHB production with lignocellulosic hydrolysates. When pine tree hydrolysates were used, PHB production was the highest at 3.66 ± 0.01 g/L, followed by Miscanthus (3.46 ± 0.09 g/L) and barley straw hydrolysate (3.36 ± 0.36 g/L). Overall, these results reveal the potential of Loktanella sp. SM43 to produce PHB using various lignocellulosic hydrolysates as feedstock and the first systematic study for PHB production with Loktanella sp. The approach of screening novel strains is a strategy to overcome co-utilization of sugars without genetic engineering.

Novel Poly(butylene adipate-co-terephthalate)-degrading Bacillus sp. JY35 from wastewater sludge and its broad degradation of various bioplastics.

Poly(butylene adipate-co-terephthalate) (PBAT), a bioplastic consisting of aliphatic hydrocarbons and aromatic hydrocarbons, was developed to overcome the shortcomings of aliphatic and aromatic polyesters. Many studies report the use of PBAT as a blending material for improving properties of other bioplastics. However, there are few studies on microorganisms that degrade PBAT. We found six kinds of PBAT-degrading microorganisms from various soils. Among these, Bacillus sp. JY35 showed superior PBAT degradability and robustness to temperature. We monitored the degradation of PBAT films by Bacillus sp. JY35 using scanning electron microscopy, field emission scanning electron microscopy, Fourier-transform infrared spectroscopy, and gel permeation chromatography. GC-MS was used to measure the PBAT film degradation rate at different temperatures and with additional NaCl and carbon sources. Certain additional carbon sources improve the growth of Bacillus sp. JY35. However, this did not increase PBAT film degradation. Time-dependent PBAT film degradation rates were measured during three weeks of cultivation, after which the strain achieved almost 50% degradation. Additionally, various bioplastics were applied to solid cultures to confirm the biodegradation range of Bacillus sp. JY35, which can degrade not only PBAT but also PBS, PCL, PLA, PHB, P(3HB-co-4HB), P(3HB-co-3HV), P(3HB-co-3HHx), and P(3HB-co-3HV-co-3HHx), suggesting its usability as a superior bioplastic degrader.

Finding of novel lactate utilizing Bacillus sp. YHY22 and its evaluation for polyhydroxybutyrate (PHB) production.

Polyhydroxyalkanoates (PHAs) and their derivatives are biopolymers that have the potential of replacing petroleum-based plastics and can be produced and degraded via bacterial metabolism. However, there are only a few studies on polyhydroxybutyrate (PHB) production using lactate, one of the major waste organic acids that could be implemented in the production of polylactic acid (PLA). Herein, we screened and characterized the PHA-producing microbial strains isolated from saltern soil from Docho Island (South Korea). Among the 24 identified microorganisms that can use lactate as a carbon source, Bacillus sp. YHY22, a newly reported strain, produced the highest amount of PHB: 4.05 g/L with 6.25 g/L dry cell weight, which is 64.7% PHB content under optimal production conditions. Bacillus sp. YHY22 could form the poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer with propionate addition. Moreover, Bacillus sp. YHY22 produced PHB in non-sterilized 2% lactate and 8% NaCl marine broth culture medium, suggesting that its production can occur in high salinity media without additional sterilization steps, rendering fermentation cost- and time-efficient.

Morphology of foliar trichomes of the Chinese cork oak Quercus variabilis by electron microscopy and three-dimensional surface profiling.

Morphology of foliar trichomes was analyzed in Quercus variabilis by electron microscopy and three-dimensional surface profiling. Leaves from suppressed or dominant sprouts of the oak species were collected after a forest fire to unravel the effects of the disturbance factor on sprouting of the oak species. Scanning electron microscopy revealed two types of trichomes depending on the leaf surface. The trichomes on the adaxial surface were branched and constricted, and possessed a single row of thin-walled cells with a collapsed morphology (glandular branched uniseriate trichomes). Meanwhile, the trichomes on the abaxial surface were star-shaped, unfused with each other, and had 6 to 10 rays (nonglandular simple stellate trichomes). An apparent proliferation of trichomes was evident on the adaxial surface of the dominant sprouts. Uniseriate trichomes could be discernable as an elevation from the surface by white light scanning interferometry. By transmission electron microscopy, thin and convoluted cell wall, degenerated cytoplasm, and a single row of cells were characteristic of the trichomes on the adaxial surface. The thick cell walls of the mature trichomes on the abaxial surface represented the nonglandular nature. This is the first report on the morphological and ultrastructural characterization of foliar trichomes of the oak species.