ABSTRACT
We have reported that nanowell array (NWA) can enhance electrochemical detection of molecular binding events by controlling the binding sites of the captured molecules. Using NWA biosensor based amperometric analysis, we have detected biological macromolecules such as DNA, protein or aptamers at low concentrations. In this research, we developed an impedimetric immunosensor based on wafer-scale NWA for electrochemical detection of stress-induced-phosphoprotein-1 (STIP-1). In order to develop NWA sensor through the cost-effective combination of high-throughput nanopattern, the NWA electrode was fabricated on Si wafer by krypton-fluoride (KrF) stepper semiconductor process. Finally, 12,500,000 ea nanowell with a 500 nm diameter was fabricated on 4 mm × 2 mm substrate. Next, by using these electrodes, we measured impedance to quantify antigen binding to the immunoaffinity layer. The limit of detection (LOD) of the NWA was improved about 100-fold compared to milli-sized electrodes (4 mm × 2 mm) without an NWA. These results suggest that wafer-scale NWA immunosensor will be useful for biosensing applications because their interface response is appropriate for detecting molecular binding events.
Subject(s)
Binding Sites , Biosensing Techniques/methods , Heat-Shock Proteins/isolation & purification , Aptamers, Nucleotide/chemistry , Dielectric Spectroscopy , Gold/chemistry , Humans , Limit of DetectionABSTRACT
The rapid identification and verification of single nucleotide polymorphisms (SNPs) were demonstrated using a well array sensor containing anti-biofouling titanium (Ti). Probe single-stranded DNA (ssDNA) was immobilized inside a titanium-well array on amine-modified glass surfaces with anti-biofouling behavior via a streptavidin-biotin interaction. Fluorescence intensity changes originating from the hybridization of nucleic acids to protein-bound nucleic acids linked to Alexa Fluor (FL) 647 were observed. The protocol was highly sensitive and reproducible for the detection of DNA hybridization. Significant changes in fluorescence signals were observed when using target DNA with a single base mismatch, indicating that this method is applicable to SNP detection. The microarray technology for the detection of SNPs using anti-biofouling Ti and other methods can be used as a highly sensitive in vitro medical sensor, as highlighted by an increase in genotyping accuracy.
Subject(s)
DNA Mutational Analysis/instrumentation , DNA/genetics , Nanotechnology/instrumentation , Oligonucleotide Array Sequence Analysis/instrumentation , Polymorphism, Single Nucleotide/genetics , Sequence Analysis, DNA/instrumentation , Titanium/chemistry , Equipment Design , Equipment Failure Analysis , Spectrometry, Fluorescence/instrumentationABSTRACT
An electrochemical microfluidic device has been fabricated on PET (polyethylene terephthalate) substrate using an imprinting method. The imprinting transfers patterns from a stamp into a substrate mechanically. However, a blanket mould imprinting process has been introduced to embed the photolithographically produced gold metal electrode lines into the PET substrate resulting in an individually addressable array flush to better than 100 nm. The device formed one wall of a packed chromatography column. The array was electrochemically characterised using standard redox probes in both stagnant conditions and under flow. Both numerical modelling and experimental data show improved sensitivity under flow and a limiting current which scaled linearly with the cube root of the volume flow rate. A chromatographic separation of the bioanalytical significant neurotransmitter dopamine (DA) and its metabolite DOPAC was achieved and electrochemically detected at multiple locations within the column. The PET device was stable and robust to leaks to pressures well in excess of those required for chromatographic separations.
