The development of a decision support system of vocational counseling for people with disabilities.

After a disability occurs, vocational rehabilitation is essential for promoting return to society and improving quality of life. To facilitate vocational rehabilitation, an effective counseling by human expert is essential. However, the number of the experts is not many. Thus, people with disabilities (PWD) have had difficulty in having proper vocational consultation service. To mitigate this problem, this study aims at developing a decision support system (DSS) to recommend appropriate jobs to PWD based on their characteristics. For doing this, the experts in disabilities, occupational research, and information systems participated in building the logic of the system. The DSS for scientific and quantitative vocational counseling enables job counselors to recommend appropriate occupations considering PWDs' characteristics.

Sunlight-induced self-healing of a microcapsule-type protective coating.

Photopolymerization behavior of a methacryloxypropyl-terminated polydimethylsiloxane (MAT-PDMS) healing agent was investigated in the presence of benzoin isobutyl ether (BIE) photoinitiator by Fourier transform infrared (FT-IR) spectroscopy. MAT-PDMS and BIE were microencapsulated with urea-formaldehyde polymer. The surface and shell morphology of the microcapsules was investigated by scanning electron microscopy (SEM). Mean diameter and size distribution of the microcapsules could be controlled by agitation rate. A coating matrix formulation was prepared by sol-gel reaction of tetraethyl orthosilicate (TEOS) in the presence of a polysiloxane and by subsequent addition of an adhesion promoter. The formulation and microcapsules were mixed to give a self-healing coating formulation, which was then sprayed to surface of cellulose-fiber-reinforced-cement (CRC) board or mortar. Contact angle measurements showed that both the polymerized MAT-PDMS and the prepared coating matrix are hydrophobic, and the coating matrix has good wettability with MAT-PDMS. It was confirmed by optical microscopy and SEM that, when the self-healing coating is damaged, the healing agent is released from ruptured microcapsules and fills the damaged region. The self-healing coating was evaluated as protective coating for mortar, and it was demonstrated by water permeability and chloride ion penetration tests that our system has sunlight-induced self-healing capability. Our self-healing coating is the first example of capsule-type photoinduced self-healing system, and offers the advantages of catalyst-free, environmentally friendly, inexpensive, practical healing.

Preparation and characterization of nanoporous thin films from fully aliphatic polyimides.

Fully aliphatic polyimides (APIs) were prepared from rel-(1'R,3S5'S)-spiro[furan-3(2H),6'-[3]oxabicyclo[3.2.1]octane]-2,2',4',5(4H)-tetrone (DAn) as unsymmetrical spiro dianhydride, and either cis-trans-1,4-diaminocyclohexane (mix-DACH) or trans-1,4-diaminocyclohexane (trans-DACH) as diamine. Structure of all prepared monomers and polymers was confirmed via 1H-NMR and FT-IR. The solubility, optical transparency, and thermal properties of the full APIs were investigated. The solubility and decomposition temperature of the full APIs were found to be correlated with their intermolecular regularity confirmed via wide-angle X-ray diffraction (WAXD). Triblock copolyimides were synthesized through the incorporation of a thermally labile polymer, poly(propylene glycol) (PPG), into the full APIs, and their thermal properties were studied via thermogravimetric analysis (TGA). Nanoporous thin films of the full APIs were prepared via thermolysis of the labile block in the copolyimide films. Phase separation and nanopore formation in the copolymer films were confirmed via atomic force microscopy (AFM) and scanning electron microscopy (SEM), respectively. Nanoporous pores were successfully prepared inside the films.

Photochemical crack healing in cinnamate-based polymers.

Four kinds of cinnamate-type monomers were synthesized as healing agents. Photoirradiation of the monomers gave cyclobutane-containing crosslinked polymers via [2+2] cycloaddition. Cyclobutane cleavage upon cracking of the crosslinked polymers and re-cycloaddition of the cracked polymers were investigated by FT-IR spectroscopy. Photochemical crack healing was demonstrated by measurement of flexural strength of crosslinked, cracked, and healed polymers. It was observed that microcracks with width of 200 nm to 2 microm were healed by photoirradiation.

Preparation and characterization of nanoporous polyimide films from triblock copolyimides.

Nanoporous polyimide films were prepared from triblock copolyimides. A thermally labile polymer, poly(propylene glycol), was incorporated into polyimides based on 4,4-(hexafluoroisopropylidene)diphthalic anhydride to obtain triblock copolyimides. Nanofoams were formed by thermolysis of the labile block. The thermal properties of the copolymers were investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The nanopores were characterized by scanning electron microscopy (SEM).