Are "Unstable" Burst Fractures Really Unstable?

OBJECTIVE: The stability is an important factor to decide the treatment plan in thoracolumbar burst fracture patients. Patients with an unstable burst fracture generally need operative management. Decrease in vertebral body height, local kyphosis, involvement of posterior column, and/or canal compromise are considered important factors to determine the treatment plan. On the other hand, in thoracolumbar injury classification system (TLICS), surgery is recommended in patients with TLICS of more than 5 points. The purpose of this study was to apply the TLICS score in patients with thoracolumbar burst fractures and to distinguish the differences of treatment plan on burst fracture. METHODS: All patients, diagnosed as a thoracolumbar burst fracture between January 2006 and February 2019 were included in this study. Unstable thoracolumbar burst fracture was defined as burst fracture with neurologic deficit, three-column injury, kyphosis over 30 degrees, decrease of anterior body height over 40 percent and canal comprise more than 50%. TLICS score was measured with morphology, neurological involvement and posterior ligamentous complex integrity. The existence of instability was compared with TLICS score. RESULTS: Total 233 patients (131 men, 102 women) were included in this study. In Denis classification, 51 patients (21.9%) diagnosed as stable burst fracture while 182 patients (78.1%) had unstable burst fracture. According to TLICS, 72 patients (30.9%) scored less than 4, while 161 patients (69.1%) scored 4 or more. All the patients with stable burst fracture scored 2 in TLICS. Twenty-one patients (9.0) scored 2 in TLICS but diagnosed as unstable burst fracture. Thirteen patients had over 40% of vertebra body compression, four patients had more than 50% of canal compromise, three patients had both body compression over 40% and kyphosis over 30 degrees, one patients had both body compression and canal compromise. Fifteen patients presented kyphosis over 30 degrees, and three (20%) of them scored 2 in TLICS. Seventy-three patients presented vertebral body compression over 40% and 17 (23.3%) of them scored 2 in TLICS. Fifty-three patients presented spinal canal compromise more than 50%, and five (9.4%) of them scored 2 in TLICS. CONCLUSION: Although the instability of thoracolumbar burst fracture was regarded as a critical factor for operability, therapeutic strategies by TLICS do not exactly match with the concept of instability. According to the concept of TLICS, it should be reconsidered whether the unstable burst fracture truly unstable to do operation.

Spondylolytic Spondylolisthesis of Cervical Spine.

Cervical spondylolytic spondylolisthesis is a rare congenital anomaly. It is often misunderstood as a result of trauma. However, most of them are congenital deformities. The vast majority of patients with radiographically proven cervical spondylolysis can be treated confidently with conservative measures. Cervical spondylolytic spondylolisthesis that cause symptoms requiring surgery is very rare. Surgical intervention should be reserved for those who fail non-operative management or exhibit neurologic compromise referable to an unstable spondylolytic defect. We report a case of cervical radiculopathy in a 45-year-old female patient who had been diagnosed with spondylolytic spondylolisthesis at the sixth verterba and treated with surgery.

Ossification foci act as stabilizers in continuous-type ossification of the posterior longitudinal ligament: a comparative study between laminectomy and laminoplasty.

BACKGROUND: In multilevel ossification of the posterior longitudinal ligament (OPLL), laminectomy is an effective surgical technique; however, there is a possibility of kyphotic alignment change after surgery. Nevertheless, in the continuous type of OPLL, the ossification foci are connected and may act as stabilizers preventing alignment change. We here compare the surgical outcome of laminectomy and laminoplasty in continuous-type OPLL of the cervical spine. METHODS: Seventy-three patients who underwent cervical laminectomy or laminoplasty for continuous-type OPLL from 2004 to 2014 were enrolled. The clinical outcomes were assessed by using the neck disability index, visual analogue scale, and Japanese Orthopedic Association scoring systems. Radiological evaluation with plain lateral radiographs was performed to observe alignment changes. RESULTS: The perioperative clinical outcome with laminectomy did not differ significantly from that of laminoplasty. Kyphotic change was observed in 3 of 35 patients with laminectomy and 3 of 38 patients with laminoplasty. Although loss of lordosis was observed in both groups, the C2-7 Cobb angle, sagittal vertical axis (SVA), and T1 slope did not demonstrate significant statistical differences between laminectomy and laminoplasty. Moreover, the C2-7 SVA in the C7-included laminectomy group (33.9 ± 13.4) became greater than that in the C7-excluded laminectomy group (24.8 ± 11.3) at the final follow-up (p = 0.049). CONCLUSIONS: In continuous-type OPLL, the surgical outcome did not show any significant difference between laminectomy and laminoplasty. Laminectomy alone is also a good choice in continuous-type OPLL, similar to laminoplasty.

Coronal plane spinal malalignment and Parkinson's disease: prevalence and associations with disease severity.

BACKGROUND CONTEXT: Parkinson's disease (PD) is a progressive degenerative disorder of the central nervous system. Patients with PD often present with abnormal posturing. PURPOSE: To investigate coronal plane deformities in patients with PD, and to evaluate the correlation between clinical features, coronal parameters related to spine alignment, and disease severity. STUDY DESIGN: A cross-sectional study. PATIENT SAMPLE: Eighty-nine patients with PD and 89 controls were included. OUTCOME MEASURES: A medical history was collected from the medical records. METHODS: This study was a prospective assessment of consecutive patients with PD. Clinical and demographic parameters were collected from medical records and outpatient interviews. Full-length standing anteroposterior and lateral spine radiographs were used to assess the spinal parameters. The threshold for scoliosis was set at a 10° Cobb angle, and the curve type was classified using Schwab classification. RESULTS: A total of 178 patients (89 in PD and 89 in control groups) were included. Scoliosis was identified in 27 patients (30%) and 22 controls (p=.502). However, coronal imbalance was more common in patients with PD than in controls (11 vs. 0 patients, p=.001). Scoliosis was more common in women than in men (male:female=8:19, p=.04). Back pain was more common in patients with scoliosis than in those without scoliosis (14 of 27 vs. 17 of 62, p=.036). Schwab Type IV (thoracolumbar major) was the most common type of scoliosis in patients with PD and Type V (lumbar major) was the most common type in controls. With adjustment for patient age and gender, multiple linear regression analysis revealed that severity of PD (Unified Parkinson's Disease Rating Scale, p=.037) and magnitude of global coronal malalignment (p=.003) were associated with the scoliosis Cobb angle (p=.037, B=0.139). Direction of scoliosis and side of global coronal malalignment were not significantly correlated with the laterality of predominant PD symptoms (p>.05). CONCLUSIONS: Global coronal malalignment is more prevalent in patients with PD than in controls. Greater severity of PD was significantly associated with greater magnitude of scoliosis Cobb angle, even after adjusting for the effects of patient age and gender. However, direction of scoliosis and side of global coronal malalignment were not significantly associated with the dominant laterality of PD symptoms.

Anatomical parameters of fifth lumbar vertebra in L5-S1 spondylolytic spondylolisthesis from a surgical point of view.

PURPOSE: We measured the length, width, height, and angles related to both Meyerding grading system and Marchetti-Bartolozzi classification in L5-S1 spondylolytic spondylolisthesis patients to investigate the anatomical characteristics of fifth lumbar pedicles. METHODS: Seventy patients with L5-S1 spondylolytic spondylolisthesis and general spinal disease were included. Patient attributes, Meyerding grading system and Marchetti-Bartolozzi classification of spondylolisthesis, length, width, height of L4 and L5 pedicle, and the angle between pedicle and vertebral midline were measured. The heights of L5 vertebral body, divided as anterior, mid, and posterior were also measured. RESULTS: The pedicle is elongated and the angle of the pedicle is wider in cases of L5-S1 spondylolysis. Vertebral body shape was more posteriorly wedged in L5-S1 spondylolysis. Pedicles were more narrow and shorter in L5-S1 spondylolysis. CONCLUSIONS: In L5-S1 spondylolytic spondylolisthesis, a longer screw is suitable for insertion of L5 pedicle and the screw should be inserted more medially compared to patients without spondylolysis.

Burst Fractures as a Result of Attempted Suicide by Jumping.

OBJECTIVE: Jumping from high place for the purpose of suicide results in various damages to body area. A burst fracture of vertebrae is representative of them and we reviewed eight patients who were diagnosed with spinal burst fracture following suicide falling-down. The demographics, characteristics, performed operation, combined injuries, psychological past histories of the patients were analyzed. METHODS: A retrospective study was made of patients who are diagnosed with vertebral burst fracture from falling-down with the purpose of suicide admitted to department of neurosurgery of the author's hospital, covering the period between 2003 and 2012. RESULTS: Total eight patients were suicidal jumper. There were eleven vertebral burst fractures in eight patients and mean age was 26.5 years old. Seven patients already had psychological past history and there were various combined injuries except vertebrae burst fracture. The ankle fracture such as calcaneus, talus, navicular and malleolus was the most common injury and there were also various combined injury. CONCLUSION: Suicidal jumper is different from incidental faller in some aspects because of different injury mechanism. For managing suicidal jumper, physician had to consider patients' age, affected site, psychiatric problem and combined injuries. Each department related to the injuries of patient have to cooperate each other with departments of psychiatry and rehabilitation from beginning to end.

A novel blasted and grooved low profile pedicle screw able to resist high compression bending loads.

OBJECTIVE: Polyaxial pedicle screws are a safe, useful adjunct to transpedicular fixation. However, the large screw head size can cause soft tissue irritation, high rod positioning, and facet joint injury. However, the mechanical resistance provided by small and low profile pedicle screws is very limited. We therefore developed a novel, low profile pedicle screw using grooving and blasting treatment that is able to resist a high compression bending load. METHODS: We evaluated the compression bending force to displacement and yield loads for seven different screw head types that differed with regard to their groove intervals and whether or not they had been blasted. RESULTS: The rank order of screw types that had the greatest compression bending force to displacement was as follows: (1) universal polyaxial, (2) low polyaxial with 0.1mm grooves and blasting, (3) low polyaxial with blasting, (4) low polyaxial with 0.15mm grooves and blasting, (5) low polyaxial with 0.05mm grooves and blasting, (6) low polyaxial with 0.05mm grooves, (7) and low polyaxial. Low polyaxial screws with 0.1mm grooves and blasting had the maximum yield load and highest compression bending force to displacement of all seven polyaxial screw head systems evaluated. CONCLUSION: Blasting and grooving treatment of pedicle screw heads resulted in screw heads with a high yield load and compression bending force relative to displacement because of increased friction. Low polyaxial pedicle screws with 0.1 mm grooves treated by blasting have mechanical characteristics similar to those of universal polyaxial pedicle screws.