DTR-SHIELD: Mutual Synchronization for Protecting against DoS Attacks on the SHIELD Protocol with AES-CTR Mode.

To enhance security in the semiconductor industry's globalized production, the Defense Advanced Research Projects Agency (DARPA) proposed an authentication protocol under the Supply Chain Hardware Integrity for Electronics Defense (SHIELD) program. This protocol integrates a secure hardware root-of-trust, known as a dielet, into integrated circuits (ICs). The SHIELD protocol, combined with the Advanced Encryption Standard (AES) in counter mode, named CTR-SHIELD, targets try-and-check attacks. However, CTR-SHIELD is vulnerable to desynchronization attacks on its counter blocks. To counteract this, we introduce the DTR-SHIELD protocol, where DTR stands for double counters. DTR-SHIELD addresses the desynchronization issue by altering the counter incrementation process, which previously solely relied on truncated serial IDs. Our protocol adds a new AES encryption step and requires the dielet to transmit an additional 100 bits, ensuring more robust security through active server involvement and message verification.

Bilateral macular hole in a patient with CAPN5-related neovascular inflammatory vitreoretinopathy.

PURPOSE: To characterize the genotype and phenotype of a patient with CAPN5-related neovascular inflammatory vitreoretinopathy (NIV) who have undergone surgery for macular holes. METHODS: We observed a patient presenting with retinitis pigmentosa and posterior uveitis who later developed vitreoretinal macular traction and a macular hole. Genetic testing was performed using a targeted gene panel. Fundus photography and spectral-domain optical coherence tomography were also performed. RESULTS: In a targeted gene panel, a monoallelic pathogenic variant, c.750G > T, p.Lys250Asn, in the CAPN5 gene was identified, and CAPN5-NIV was diagnosed. At the first visit, peripheral retinal degeneration and mild posterior uveitis were observed. At that time, neovascularization, epiretinal or fibrous membranes were not observed. After 5 years, vitreomacular traction developed and progressed to a full-thickness macular hole in both eyes. After pars plana vitrectomy, the macular hole was successfully closed without aggravation of uveitis. CONCLUSION: In this case, a pathogenic variant of CAPN5 lead to a distinct phenotype of retinitis pigmentosa, posterior uveitis, vitreomacular traction, and macular hole without typical inflammatory neovascularization or tractional membranes. Therefore, the clinical variability of CAPN5-NIV and genetic diagnosis should be considered in cases of atypical retinitis pigmentosa with bilateral macular hole.

Clinical and Genetic Features of Korean Patients with Achromatopsia.

This multicenter study aimed to characterize Korean patients with achromatopsia. The patients' genotypes and phenotypes were retrospectively evaluated. Twenty-one patients (with a mean age at the baseline of 10.9 years) were enrolled and followed up for a mean of 7.3 years. A targeted gene panel or exome sequencing was performed. The pathogenic variants of the four genes and their frequencies were identified. CNGA3 and PDE6C were equally the most prevalent genes: CNGA3 (N = 8, 38.1%), PDE6C (N = 8, 38.1%), CNGB3 (N = 3, 14.3%), and GNAT2 (N = 2, 9.5%). The degree of functional and structural defects varied among the patients. The patients' age exhibited no significant correlation with structural defects. During the follow-up, the visual acuity and retinal thickness did not change significantly. In CNGA3-achromatopsia patients, a proportion of patients with a normal foveal ellipsoid zone on the OCT was significantly higher than that of patients with other causative genes (62.5% vs. 16.7%; p = 0.023). In PDE6C-achromatopsia patients, the same proportion was significantly lower than that of patients with other causative genes (0% vs. 58.3%; p = 0.003). Korean patients with achromatopsia showed similar clinical features but a higher prevalence of PDE6C variants than those of other ethnic groups. The retinal phenotypes of the PDE6C variants were more likely to be worse than those of other genes.

3D-Printed Ophthalmic-Retrobulbar-Anesthesia Simulator: Mimicking Anatomical Structures and Providing Tactile Sensations.

Objective: A simulator for retrobulbar anesthesia administration mimicking the orbital anatomy and providing tactile sensation is proposed. Methods: The production process involves 3D modeling of anatomical structures on the basis of computerized tomography (CT) images, printing the models using a 3D printer, and casting the silicone. Twenty ophthalmologists administered retrobulbar anesthesia using the simulator with four different ocular axial lengths (including extreme myopes); the position of the needle tip was evaluated. The effectiveness of this simulator for training was also surveyed. Results: The proportions of the final location of the needle tip were 59.25%, 36.25%, and 4.5% for the retrobulbar space, peribulbar space, and intraocular space, respectively. Experienced ophthalmologists showed lower complication rates than residents (0.5% vs 8.5%, [Formula: see text]) and agreed that this simulator will help young ophthalmologists advance their anesthesia-administering skills. Discussion/Conclusion: The 3D-printered simulator for retrobulbar anesthesia was produced and performance was verified. The technology could be used to simulate critical orbital anatomic features and could be used as a training tool for resident ophthalmologists.

Measuring Acoustic Roughness of a Longitudinal Railhead Profile Using a Multi-Sensor Integration Technique.

It is necessary to measure accurately the rolling noise generated by the friction between wheels and rails in railway transport systems. Although many systems have recently been developed to measure the surface roughness of wheels and rails, there exist large deviations in measurements between each system whose measuring mechanism is based on a single sensor. To correct the structural problems in existing systems, we developed an automatic mobile measurement platform, named the Automatic Rail Checker (ARCer), which measures the acoustic roughness of a longitudinal railhead profile maintaining a constant speed. In addition, a new chord offset synchronization algorithm has been developed. This uses three displacement sensors to improve the measuring accuracy of the acoustic roughness of a longitudinal railhead profile, thereby minimizing the limitations of mobile platform measurement systems and measurement deviation. We then verified the accuracy of the measurement system and the algorithm through field tests on rails with different surface wear conditions.

Interactive manipulation of blood cells using a lens-integrated liquid crystal display based optoelectronic tweezers system.

This paper reports a lens-integrated liquid crystal display (LCD)-based optoelectronic tweezers (OET) system for interactive manipulation of polystyrene microspheres and blood cells by optically induced dielectrophoretic force. When a dynamic image pattern is projected into a specific area of a photoconductive layer in an OET, virtual electrodes are generated by spatially resolved illumination of the photoconductive layer, resulting in dielectrophoresis of microparticles suspended in the liquid layer under nonuniform electric field. In this study, the simple-structured OET system has been easily constructed with an OET device, an LCD and a condenser lens integrated in a conventional microscope. By using a condenser lens, both stronger dielectrophoretic forces and higher virtual electrode resolution than previously reported lens-less LCD-based OET platform are obtained. The effects of blurred LCD image and liquid chamber height on the performances of optoelectronic particle manipulation are investigated by measuring the bead velocities according to their sizes. An interactive control program for OET-based microparticle manipulation is also developed by Flash language. The integrated system is successfully applied to the parallel and interactive manipulation of red and white blood cells. Due to its simple structures, cheap manufacturing costs, and high performances, this new LCD-based OET platform may be a widely usable integrated system for optoelectronic manipulation of microparticles including living cells.