Recent advances in the control of volatile organic compounds emissions from indoor wood-based panels: A comprehensive review.

Wood-based panels provide efficient alternatives to materials such as plastics derived from traditional petroleum sources and thereby help to mitigate greenhouse gas emissions. Unfortunately, using indoor manufactured panel products also results in significant emissions of volatile organic compounds including olefins, aromatic and ester compounds, which negatively affect human health. This paper highlights recent developments and notable achievements in the field of indoor hazardous air treatment technologies to guide future research toward environmentally friendly and economically feasible directions that may have a significant impact on the improvement of human settlements. Summarizing and synthesizing the principles, advantages, and limitations of different technologies can assist policymakers and engineers in identifying the most appropriate technology for a particular air pollution control program based on criteria such as cost-effectiveness, efficiency, and environmental impact. In addition, insights into the development of indoor air pollution control technologies are provided and potential areas for innovation, improvement of existing technologies, and development of new technologies are identified. Finally, the authors also hope that this sub-paper will raise public awareness of indoor air pollution issues and promote a better understanding of the importance of indoor air pollution control technologies for public health, environmental protection, and sustainable development.

Remediation and recovery of Kariba weed as emerging contaminant in freshwater and shellfish aquaculture system via solvothermal liquefaction.

Fast growing Kariba weed causes major problems and pollution on freshwater and shellfish aquaculture systems by interfering with nutrient uptake of crops, restricting sunlight penetration, and decreasing water quality due to massive biomass of Kariba weed remnants. Solvothermal liquefaction is considered an emerging thermochemical technique to convert waste into high yield of value-added products. Solvothermal liquefaction (STL) of Kariba weed as an emerging contaminant was performed to investigate the effects of different types of solvents (ethanol and methanol) and Kariba weed mass loadings (2.5-10 % w/v) on treating and reducing the weed via conversion into potentially useful crude oil product and char. Up to 92.53 % of Kariba weed has been reduced via this technique. The optimal conditions for crude oil production were found to be at 5 % w/v of mass loading in methanol medium, resulting in a high heating value (HHV) of 34.66 MJ/kg and yield of 20.86 wt%, whereas the biochar production was found to be optimum at 7.5 % w/v of mass loading in methanol medium, resulting in 29.92 MJ/kg of HHV and 25.38 wt% of yield. The crude oil consisted of beneficial chemical compounds for biofuel production such as hexadecanoic acid, methyl ester (65.02 peak area %) and the biochar showed high carbon content (72.83 %). In conclusion, STL as a remediation for emerging Kariba weed is a feasible process for shellfish aquaculture waste treatment and biofuels production.

Utilization of current pyrolysis technology to convert biomass and manure waste into biochar for soil remediation: A review.

Traditional disposal of animal manures and lignocellulosic biomass is restricted by its inefficiency and sluggishness. To advance the carbon management and greenhouse gas mitigation, this review scrutinizes the effect of pyrolysis in promoting the sustainable biomass and manure disposal as well as stimulating the biochar industry development. This review has examined the advancement of pyrolysis of animal manure (AM) and lignocellulosic biomass (LB) in terms of efficiency, cost-effectiveness, and operability. In particular, the applicability of pyrolysis biochar in enhancing the crops yields via soil remediation is highlighted. Through pyrolysis, the heavy metals of animal manures are fixated in the biochar, thereby both soil contamination via leaching and heavy metal uptake by crops are minimized. Pyrolysis biochar is potentially use in soil remediation for agronomic and environmental co-benefits. Fast pyrolysis assures high bio-oil yield and revenue with better return on investment whereas slow pyrolysis has low revenue despite its minimum investment cost because of relatively low selling price of biochar. For future commercialization, both continuous reactors and catalysis can be integrated to pyrolysis to ameliorate the efficiency and economic value of pyrolysis biochar.

Microwave processing of oil palm wastes for bioenergy production and circular economy: Recent advancements, challenges, and future prospects.

The valorization and conversion of biomass into various value-added products and bioenergy play an important role in the realization of sustainable circular bioeconomy and net zero carbon emission goals. To that end, microwave technology has been perceived as a promising solution to process and manage oil palm waste due to its unique and efficient heating mechanism. This review presents an in-depth analysis focusing on microwave-assisted torrefaction, gasification, pyrolysis and advanced pyrolysis of various oil palm wastes. In particular, the products from these thermochemical conversion processes are energy-dense biochar (that could be used as solid fuel, adsorbents for contaminants removal and bio-fertilizer), phenolic-rich bio-oil, and H2-rich syngas. However, several challenges, including (1) the lack of detailed study on life cycle assessment and techno-economic analysis, (2) limited insights on the specific foreknowledge of microwave interaction with the oil palm wastes for continuous operation, and (3) effects of tunable parameters and catalyst's behavior/influence on the products' selectivity and overall process's efficiency, remain to be addressed in the context of large-scale biomass valorization via microwave technology.

Product spectrum analysis and microbial insights of medium-chain fatty acids production from waste biomass during liquor fermentation process: Effects of substrate concentrations and fermentation modes.

Substrate toxicity would limit the upgrading of waste biomass to medium-chain fatty acids (MCFAs). In this work, two fermentation modes of electro-fermentation (EF) and traditional fermentation (TF) with different concentration of liquor fermentation waste (20%, 40%, 60%) were used for MCFAs production as well as mechanism investigation. The highest caproate (4.04 g/L) and butyrate (13.96 g/L) concentrations were obtained by EF at 40% substrate concentration. TF experiments showed that the substrate concentration above 40% severely inhibited ethanol oxidation and products formation. Compared with TF mode, the total substrates consumption and product yields under EF mode were significantly increased by 2.6%-43.5% and 54.0%-83.0%, respectively. Microbial analysis indicated that EF effectively alleviated substrate toxicity and enriched chain elongation bacteria, particularly Clostridium_sensu_stricto 12, thereby promoting ethanol oxidation and products formation. Caproiciproducens tolerated high-concentration substrates to ensure normal lactate metabolism. This study provides a new way to produce MCFAs from high concentration wastewater.

Transforming municipal cotton waste into a multilayer fibre biocomposite with high strength.

We analyzed the problematic textile fiber waste as potential precursor material to produce multilayer cotton fiber biocomposite. The properties of the products were better than the current dry bearing type particleboards and ordinary dry medium-density fiberboard in terms of the static bending strength (67.86 MPa), internal bonding strength (1.52 MPa) and water expansion rate (9.57%). The three-layer, four-layer and five-layer waste cotton fiber composite (WCFC) were tried in the experiment, the mechanical properties of the three-layer WCFC are insufficient, the five-layer WCFC is too thick and the four-layer WCFC had the best comprehensive performance. The cross-section morphology of the four-layer WCFC shows a dense structure with a high number of adhesives attached to the fiber. The hardness and stiffness of the four-layer cotton fiber composite enhanced by the high crystallinity of cellulose content, and several chemical bondings were presence in the composites. Minimum mass loss (30%) and thermal weight loss rate (0.70%/°C) was found for the four-layer WCFC. Overall, our findings suggested that the use of waste cotton fiber (WCF) to prepare biocomposite with desirable physical and chemical properties is feasible, and which can potentially be used as building material, furniture and automotive applications.

Environment impact and bioenergy analysis on the microwave pyrolysis of WAS from food industry: Comparison of CO2 and N2 atmosphere.

The alarming output of waste activated sludge (WAS) from industries requires proper management routes to minimize its impact on the environment during disposal. Pyrolysis is a feasible way of processing and valorizing WAS into higher-value products of alternate use. Despite extensive research into the potential of WAS through pyrolysis, the technology's long-term viability and environmental impact have yet to be fully revealed. In addition, the environmental effects of utilizing different pyrolysis atmosphere (N2 or CO2) has not been studied before, although benefits of CO2 reactivity during pyrolysis have been discovered. This study evaluates the process's environmental impact, carbon footprint, and bioenergy yield when different pyrolysis atmospheres are used. The global warming potential (GWP) for a functional unit of 1 t of dried WAS is 203.81 kg CO2 eq. The heat required during pyrolysis contributes the most (63.7%) towards GWP due to high energy usage, followed by the drying process (23.6%). Transportation contributes the most towards toxicity impact (59.3%) through dust, NOx, NH3 and SO2 emissions. The initial moisture content of raw WAS (65%) greatly impacts overall energy consumption and environmental impact. Pyrolysis in an N2 atmosphere will result in a higher overall bioenergy yield (833 kWh/tonne) and a lower carbon footprint (-1.09 kg CO2/tonne). However, when CO2 was used, the specific energy value within the biochar is higher (22.26 MJ/kg) due to enhanced carbonization. The carbon content of gas derived increased due to higher CO yield. From an energy perspective, the current setup will achieve a net positive bioenergy yield of 561 kW (CO2) and 833 kW (N2), where end products like biochar, bio-oil and gas can be used for power production. Despite the energy-intensive process, microwave pyrolysis has excellent potential to achieve a negative carbon footprint. The biochar used for soil amendment served as a good carbon sink. The utilization of CO2 as carrier gases provides a pathway to utilize anthropogenic CO2, which helps reduce global warming. This work demonstrates microwave pyrolysis as a negative emission, bioenergy-producing approach for WAS disposal and valorization.

A bibliometric analysis on the tribological and physicochemical properties of vegetable oil-based bio-lubricants (2010-2021).

Vegetable oil-based bio-lubricants possess potential as an alternative to mineral oil-based lubricants due to their biodegradability and renewability. However, a detailed examination of the publication focus, trend, and future direction related to these bio-lubricants' tribological and physicochemical properties is scarce. Therefore, the study presents a bibliometric analysis of vegetable oil-based bio-lubricant. One hundred sixty-five publications were extracted from Web of Science (WoS) from 2010 to 2021. During this period, the total citation was 2,240, recording an average citation per publication of 13.58. Proceedings of The Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology was the top productive journal, publishing 10.3% of the publications selected on the studied topic. From 2010 to 2021, India was the most productive country working on bio-lubricants due to its abundance of coconut products, followed by Malaysia due to its abundance of palm products. The keyword analysis indicated that a significant amount of work emphasised the derivation of bio-lubricants with an increasing shift towards tribological performance characterisation. From the analysis, palm is the most studied bio-lubricant, followed by castor oil. The reported viscosity and viscosity index values cover an extensive range, allowing these bio-lubricants to be adopted for a wide range of applications. For different vegetable oil-based bio-lubricants, the coefficient of friction is reported from 0.001 to 0.78, with the wear scar diameter being reported from 0.075 µm to 4.59 mm. Even though these bio-lubricants' friction and wear performances can be tabulated, the dataset is still unreliable for lubricant-selection purposes because of the varying test conditions. Such a scenario also limits the ability to correlate the role of fatty acid composition in the vegetable oil-based bio-lubricants in fulfilling their various application-specific potentials. Therefore, this study recommends that a unified correlation between the fatty acid composition and its tribological performance be attained consistently to better elucidate the potential of vegetable oil-based bio-lubricants.