Noncontact whole-chamber charge density mapping of the left ventricle: Preclinical evaluation in a sheep model.

BACKGROUND: Conventional contact-based electroanatomic mapping is poorly suited for rapid or dynamic ventricular arrhythmias. Whole-chamber charge density (CD) mapping could efficiently characterize complex ventricular tachyarrhythmias and yield insights into their underlying mechanisms. OBJECTIVE: The purpose of this study was to evaluate the feasibility and accuracy of noncontact whole-chamber left ventricular (LV) CD mapping and to characterize CD activation patterns during sinus rhythm, ventricular pacing, and ventricular fibrillation (VF). METHODS: Ischemic scar as defined by CD amplitude thresholds was compared to late gadolinium enhancement criteria on magnetic resonance imaging using an iterative closest point algorithm. Electrograms recorded at sites of tissue contact were compared to the nearest noncontact CD-derived electrograms to calculate signal morphology cross-correlations and time differences. Regions of consistently slow conduction were examined relative to areas of scar and to localized irregular activation (LIA) during VF. RESULTS: Areas under receiver operating characteristic curves (AUCs) of CD-defined dense and total LV scar were 0.92 ± 0.03 and 0.87 ± 0.06, with accuracies of 0.86 ± 0.03 and 0.80 ± 0.05, respectively. Morphology cross-correlation between 8677 contact and corresponding noncontact electrograms was 0.93 ± 0.10, with a mean time difference of 2.5 ± 5.6 ms. Areas of consistently slow conduction tended to occur at scar borders and exhibited spatial agreement with LIA during VF (AUC 0.90 ± 0.02). CONCLUSION: Noncontact LV CD mapping can accurately delineate ischemic scar. CD-derived ventricular electrograms correlate strongly with conventional contact-based electrograms. Regions with consistently slow conduction are often at scar borders and tend to harbor LIA during VF.

Combining endocardial mapping and electrocardiographic imaging (ECGI) for improving PVC localization: A feasibility study.

INTRODUCTION: Accurate reconstruction of cardiac activation wavefronts is crucial for clinical diagnosis, management, and treatment of cardiac arrhythmias. Furthermore, reconstruction of activation profiles within the intramural myocardium has long been impossible because electrical mapping was only performed on the endocardial surface. Recent advancements in electrocardiographic imaging (ECGI) have made endocardial and epicardial activation mapping possible. We propose a novel approach to use both endocardial and epicardial mapping in a combined approach to reconstruct intramural activation times. OBJECTIVE: To implement and validate a combined epicardial/endocardial intramural activation time reconstruction technique. METHODS: We used 11 simulations of ventricular activation paced from sites throughout myocardial wall and extracted endocardial and epicardial activation maps at approximate clinical resolution. From these maps, we interpolated the activation times through the myocardium using thin-plate-spline radial basis functions. We evaluated activation time reconstruction accuracy using root-mean-squared error (RMSE) of activation times and the percent of nodes within 1 ms of the ground truth. RESULTS: Reconstructed intramural activation times showed an RMSE and percentage of nodes within 1 ms of the ground truth simulations of 3 ms and 70%, respectively. In the worst case, the RMSE and percentage of nodes were 4 ms and 60%, respectively. CONCLUSION: We showed that a simple, yet effective combination of clinical endocardial and epicardial activation maps can accurately reconstruct intramural wavefronts. Furthermore, we showed that this approach provided robust reconstructions across multiple intramural stimulation sites.

High-resolution noncontact charge-density mapping of endocardial activation.

BACKGROUND: Spatial resolution in cardiac activation maps based on voltage measurement is limited by far-field interference. Precise characterization of electrical sources would resolve this limitation; however, practical charge-based cardiac mapping has not been achieved. METHODS: A prototype algorithm, developed from first principles of electrostatic field theory, derives charge density (CD) as a spatial representation of the true sources of the cardiac field. The algorithm processes multiple, simultaneous, noncontact voltage measurements within the cardiac chamber to inversely derive the global distribution of CD sources across the endocardial surface. RESULTS: Comparison of CD to an established computer-simulated model of atrial conduction demonstrated feasibility in terms of spatial, temporal, and morphologic metrics. Inverse reconstruction matched simulation with median spatial errors of 1.73 mm and 2.41 mm for CD and voltage, respectively. Median temporal error was less than 0.96 ms and morphologic correlation was greater than 0.90 for both CD and voltage. Activation patterns observed in human atrial flutter reproduced those established through contact maps, with a 4-fold improvement in resolution noted for CD over voltage. Global activation maps (charge density-based) are reported in atrial fibrillation with confirmed reduction of far-field interference. Arrhythmia cycle-length slowing and termination achieved through ablation of critical points demonstrated in the maps indicates both mechanistic and pathophysiological relevance. CONCLUSION: Global maps of cardiac activation based on CD enable classification of conduction patterns and localized nonpulmonary vein therapeutic targets in atrial fibrillation. The measurement capabilities of the approach have roles spanning deep phenotyping to therapeutic application. TRIAL REGISTRATION: ClinicalTrials.gov NCT01875614. FUNDING: The National Institute for Health Research (NIHR) Translational Research Program at Royal Papworth Hospital and Acutus Medical.

Theory and operation of 2-D array piezoelectric micromachined ultrasound transducers.

Piezoelectric micromachined ultrasound transducers (pMUTs) are a new approach for the construction of 2-D arrays for forward-looking 3-D intravascular (IVUS) and intracardiac (ICE) imaging. Two-dimensional pMUT test arrays containing 25 elements (5 x 5 arrays) were bulk micromachined in silicon substrates. The devices consisted of lead zirconate titanate (PZT) thin film membranes formed by deep reactive ion etching of the silicon substrate. Element widths ranged from 50 to 200 microm with pitch from 100 to 300 mum. Acoustic transmit properties were measured in de-ionized water with a calibrated hydrophone placed at a range of 20 mm. Measured transmit frequencies for the pMUT elements ranged from 4 to 13 MHz, and mode of vibration differed for the various element sizes. Element capacitance varied from 30 to over 400 pF depending on element size and PZT thickness. Smaller element sizes generally produced higher acoustic transmit output as well as higher frequency than larger elements. Thicker PZT layers also produced higher transmit output per unit electric field applied. Due to flexure mode operation above the PZT coercive voltage, transmit output increased nonlinearly with increased drive voltage. The pMUT arrays were attached directly to the Duke University T5 Phased Array Scanner to produce real-time pulse-echo B-mode images with the 2-D pMUT arrays.

Low-cost, scalable laser scanning module for real-time reflectance and fluorescence confocal microscopy.

We present a low-cost, high-speed, retrofitted laser scanning module for microscopy. The cage-mounted system, with various available fiber-coupled sources, offers a real-time imaging alternative to costly commercial systems with capabilities for conventional or confocal reflectance and fluorescence applications as well as advanced laser scanning microscopy implementations. Reflectance images of a resolution target and confocal images of fluorescent polystyrene beads are presented for system characterization. Confocal fluorescence image stacks of T84 epithelial cancer cells are presented to demonstrate application to biological studies. This laser scanning module is a flexible, scalable, high-speed alternative to commercial laser scanning systems suitable for applications requiring a simple imaging tool and for teaching laboratories.