Kaolin-embedded cellulose hydrogel with tunable properties as a green fire retardant.

This study reports the synthesis of methylene bisacrylamide (MBA) crosslinked cellulose-kaolin (CMK) composite hydrogels. The internal structures of hydrogels were deduced using network parameters, viz. elastic modulus, average molecular weight, mesh size, and effective crosslink. Meanwhile, combustion behavior was investigated using the cone calorimeter test (CCT), limiting oxygen index (LOI) test, vertical flammability test (VFT), and open fire test (OFT). Our results revealed that kaolin addition improves the fire retardancy of hydrogels but reduces their swelling ability. Hydrogel having cellulose to MBA ratio of 1:2 and 2 % w/v kaolin (CM2K2) produced 63 % wt. char residue and the hydrogel-coated cotton fabric exhibited the lowest heat release rate (HRR) of 26.60 kJ/m2 and total heat release (THR) of 0.9 MJ/m2. The LOI of the cotton fabric surged from 20 % to 34.37 % after hydrogel coating. Kinetic analysis using the isoconversional model yielded the highest activation energy (216 kJ/mol) for the CM2K2 hydrogel, corroborating the increased LOI after kaolin addition. VFT and OFT validated the delay in the burning process and the formation of a char layer, which protected the underlying layer of cotton from burning. Overall, cellulose-kaolin hydrogels developed in this study are effective green fire retardant coatings for flammable materials.

Ultrasound-assisted facile one-pot synthesis of ternary MWCNT/MnO2/rGO nanocomposite for high performance supercapacitors with commercial-level mass loadings.

Commercial application of supercapacitors (SCs) requires high mass loading electrodes simultaneously with high energy density and long cycle life. Herein, we have reported a ternary multi-walled carbon nanotube (MWCNT)/MnO2/reduced graphene oxide (rGO) nanocomposite for SCs with commercial-level mass loadings. The ternary nanocomposite was synthesized using a facile ultrasound-assisted one-pot method. The symmetric SC fabricated with ternary MWCNT/MnO2/rGO nanocomposite demonstrated marked enhancement in capacitive performance as compared to those with binary nanocomposites (MnO2/rGO and MnO2/MWCNT). The synergistic effect from simultaneous growth of MnO2 on the graphene and MWCNTs under ultrasonic irradiation resulted in the formation of a porous ternary structure with efficient ion diffusion channels and high electrochemically active surface area. The symmetric SC with commercial-level mass loading electrodes (∼12 mg cm-2) offered a high specific capacitance (314.6 F g-1) and energy density (21.1 W h kg-1 at 150 W kg-1) at a wide operating voltage of 1.5 V. Moreover, the SC exhibits no loss of capacitance after 5000 charge-discharge cycles showcasing excellent cycle life.

L band brightness temperature observations over a corn canopy during the entire growth cycle.

During a field campaign covering the 2002 corn growing season, a dual polarized tower mounted L-band (1.4 GHz) radiometer (LRAD) provided brightness temperature (T(B)) measurements at preset intervals, incidence and azimuth angles. These radiometer measurements were supported by an extensive characterization of land surface variables including soil moisture, soil temperature, vegetation biomass, and surface roughness. In the period May 22 to August 30, ten days of radiometer and ground measurements are available for a corn canopy with a vegetation water content (W) range of 0.0 to 4.3 kg m(-2). Using this data set, the effects of corn vegetation on surface emissions are investigated by means of a semi-empirical radiative transfer model. Additionally, the impact of roughness on the surface emission is quantified using T(B) measurements over bare soil conditions. Subsequently, the estimated roughness parameters, ground measurements and horizontally (H)-polarized T(B) are employed to invert the H-polarized transmissivity (γ(h)) for the monitored corn growing season.