Quality of life in congenital diaphragmatic hernia survivors treated at a non-ECMO centre from 1998 to 2015: a cross-sectional study.

BACKGROUND: Survival of infants with congenital diaphragmatic hernia (CDH) has increased and more insight is warranted on the long-term issues of this condition. METHODS: We conducted a cross-sectional study on consecutively born infants with CDH treated at a non-extracorporeal membrane oxygenation centre (ECMO) from 1998 to 2015. Quality of life was evaluated using the Pediatric Quality of Life Inventory Generic Core Scale 4.0 (PedsQL(4.0)) Questionnaire and an interview was conducted to assess for CDH-related morbidity. RESULTS: 71 eligible CDH survivors were identified and 51 consented to participate: aged 5-21 years, 28 (54.9%) male, 42 (82.4%) with left-sided hernias, 10 (19.6%) needed patch repair, median length of stay in hospital was 27.96 days (IQR 18.54-61.56). Forty-nine completed the questionnaire with a median PedsQL total score for participants of 82.6 vs 83.7 of the total proxy parent score (p=0.04). Total score was significantly lower for participants aged 5-12 years compared with participants aged 13-21 years (p=0.04); however, when reported by domains, only the physical score remained significantly lower (p=0.048). Two (4.1%) participants' and 8 (16.7%) proxy parents' scores were below 70 and considered at risk of impaired quality of life. We identified the presence of CDH-related morbidity in our population, and confirmed an association between respiratory morbidity and lower PedsQL scores (p=0.04). CONCLUSION: We report an overall good quality of life in our population with CDH. However, a lower physical score was noted when compared with a national Danish cohort and individuals at risk of reduced quality of life were recognised. Structured follow-up programmes to identify and ensure early management of CDH-related issues may prevent a negative impact on quality of life.

Online suicidal thoughts and/or behaviours talk: A scoping review protocol.

The anonymity that the internet and social media affords users means that suicidal thoughts and/or behaviours can be talked about with a sense of freedom and disinhibition that is often not possible in face-to-face contexts. Better understanding online suicidal thoughts and/or behaviour talk is critical as more people turn to online spaces for support. Without this the potentiality of such spaces as sites for suicide prevention and intervention is likely to remain unrealised. Currently there are no scoping or systematic review syntheses focusing on internet and/or on social media suicidal thoughts and/or behaviour talk. This lack of synthesis is problematic as it makes it more difficult for online suicide prevention and intervention practices, policies, and our understanding of suicide to advance in a coherent and evidence-based manner. A scoping review protocol following Arksey and O'Malley's six-step modified framework has been developed to address this synthesis gap. It aims to systematically map the empirical literature that has investigated online suicidal thoughts and/or behaviours talk. It is anticipated that review outcomes could inform the training of health practitioners and peer/professional online moderators in how to best talk with people experiencing suicidal thoughts and/or behaviours. Outcomes could also form an evidence-base for developing policies and practices that focus on online places as safe spaces to talk about suicidal thoughts and/or behaviours. Developers of safe language guidelines could also use the outcomes to audit how well current guidelines reflect empirical evidence. Outcomes could enable researchers to design future online suicidal thoughts and/behaviours talk studies that extend our understandings of suicide leading to potential refinements of contemporary suicide theories/models.

Suicide capability within the ideation-to-action framework: A systematic scoping review.

Suicide capability is theorised to facilitate the movement from suicidal ideation to suicide attempt. Three types of contributors are posited to comprise suicide capability: acquired, dispositional, and practical. Despite suicide capability being critical in the movement from ideation-to-attempt, there has been no systematic synthesis of empirical evidence relating to suicide capability that would enable further development and refinement of the concept. This study sought to address this synthesis gap. A scoping review was conducted on suicide capability studies published January 2005 to January 2022. Eleven electronic databases and grey literature sources were searched returning 5,212 potential studies. After exclusion criteria application, 90 studies were included for final analysis. Results synthesis followed a textual narrative approach allocating studies based on contributors of suicide capability. Most studies focused on investigating only one factor within contributors. Painful and provocative events appear to contribute to acquired capability more so than fearlessness about death. Whilst emerging evidence for dispositional and practical contributors is promising, the small number of studies prevents further conclusions from being drawn. An unexpected additional cognitive contributor was identified. The focus of a single factor from most studies and the limited number of studies on contributors other than acquired capability limits the theoretical development and practical application of suicide capability knowledge. Given that suicide is a complex and multifaceted behaviour, future research that incorporates a combination of contributors is more likely to advance our understandings of suicide capability.

Combinatorial Synthesis of Magnesium Tin Nitride Semiconductors.

Nitride materials feature strong chemical bonding character that leads to unique crystal structures, but many ternary nitride chemical spaces remain experimentally unexplored. The search for previously undiscovered ternary nitrides is also an opportunity to explore unique materials properties, such as transitions between cation-ordered and -disordered structures, as well as to identify candidate materials for optoelectronic applications. Here, we present a comprehensive experimental study of MgSnN2, an emerging II-IV-N2 compound, for the first time mapping phase composition and crystal structure, and examining its optoelectronic properties computationally and experimentally. We demonstrate combinatorial cosputtering of cation-disordered, wurtzite-type MgSnN2 across a range of cation compositions and temperatures, as well as the unexpected formation of a secondary, rocksalt-type phase of MgSnN2 at Mg-rich compositions and low temperatures. A computational structure search shows that the rocksalt-type phase is substantially metastable (>70 meV/atom) compared to the wurtzite-type ground state. Spectroscopic ellipsometry reveals optical absorption onsets around 2 eV, consistent with band gap tuning via cation disorder. Finally, we demonstrate epitaxial growth of a mixed wurtzite-rocksalt MgSnN2 on GaN, highlighting an opportunity for polymorphic control via epitaxy. Collectively, these findings lay the groundwork for further exploration of MgSnN2 as a model ternary nitride, with controlled polymorphism, and for device applications, enabled by control of optoelectronic properties via cation ordering.

Carrier lifetimes of >1 µs in Sn-Pb perovskites enable efficient all-perovskite tandem solar cells.

All-perovskite-based polycrystalline thin-film tandem solar cells have the potential to deliver efficiencies of >30%. However, the performance of all-perovskite-based tandem devices has been limited by the lack of high-efficiency, low-band gap tin-lead (Sn-Pb) mixed-perovskite solar cells (PSCs). We found that the addition of guanidinium thiocyanate (GuaSCN) resulted in marked improvements in the structural and optoelectronic properties of Sn-Pb mixed, low-band gap (~1.25 electron volt) perovskite films. The films have defect densities that are lower by a factor of 10, leading to carrier lifetimes of greater than 1 microsecond and diffusion lengths of 2.5 micrometers. These improved properties enable our demonstration of >20% efficient low-band gap PSCs. When combined with wider-band gap PSCs, we achieve 25% efficient four-terminal and 23.1% efficient two-terminal all-perovskite-based polycrystalline thin-film tandem solar cells.

Dynamics of singlet fission and electron injection in self-assembled acene monolayers on titanium dioxide.

We employ a combination of linear spectroscopy, electrochemistry, and transient absorption spectroscopy to characterize the interplay between electron transfer and singlet fission dynamics in polyacene-based dyes attached to nanostructured TiO2. For triisopropyl silylethynyl (TIPS)-pentacene, we find that the singlet fission time constant increases to 6.5 ps on a nanostructured TiO2 surface relative to a thin film time constant of 150 fs, and that triplets do not dissociate after they are formed. In contrast, TIPS-tetracene singlets quickly dissociate in 2 ps at the molecule/TiO2 interface, and this dissociation outcompetes the relatively slow singlet fission process. The addition of an alumina layer slows down electron injection, allowing the formation of triplets from singlet fission in 40 ps. However, the triplets do not inject electrons, which is likely due to a lack of sufficient driving force for triplet dissociation. These results point to the critical balance required between efficient singlet fission and appropriate energetics for interfacial charge transfer.

A Randomized Double-Blind Controlled Trial of Intravenous Meloxicam in the Treatment of Pain Following Dental Impaction Surgery.

This randomized, controlled phase 2 study was conducted to evaluate the analgesic efficacy, safety, and tolerability of single intravenous (IV) doses of 15 mg, 30 mg, and 60 mg meloxicam compared with oral ibuprofen 400 mg and placebo after dental impaction surgery. The primary efficacy end point was the sum of time-weighted pain intensity differences for 0-24 hours postdose. Among 230 evaluable subjects, meloxicam IV 60 mg produced the greatest reduction in pain, followed by the 30-mg and 15-mg doses. Statistically significant differences in summed pain intensity differences over 24 hours were demonstrated for each active-treatment group vs placebo (favoring active treatment) and for meloxicam IV 30 mg and 60 mg vs ibuprofen 400 mg (favoring meloxicam IV). Moreover, there was a statistically significant dose response for meloxicam IV 15 mg to 60 mg. The onset of action for meloxicam IV was rapid and sustained; significant differences in pain intensity differences were detected as early as 10 minutes postdose and lasted through the 24-hour postdose period. Subjects in the meloxicam IV groups were more likely than placebo recipients to achieve perceptible and meaningful pain relief and were less likely to use rescue medication. Patient-reported global evaluation showed that meloxicam IV 60 mg had the highest rating. There were no deaths, serious adverse events, or discontinuations due to adverse events. The incidence of subjects with ≥1 treatment-emergent adverse event was greatest in the placebo group, followed by the groups that received ibuprofen, meloxicam IV 15 mg, 30 mg, and 60 mg. Nausea was the most commonly reported treatment-emergent adverse event. CLINICAL TRIAL REGISTRATION NUMBER: NCT00945763.

Silicon Photoelectrode Thermodynamics and Hydrogen Evolution Kinetics Measured by Intensity-Modulated High-Frequency Resistivity Impedance Spectroscopy.

We present an impedance technique based on light intensity-modulated high-frequency resistivity (IMHFR) that provides a new way to elucidate both the thermodynamics and kinetics in complex semiconductor photoelectrodes. We apply IMHFR to probe electrode interfacial energetics on oxide-modified semiconductor surfaces frequently used to improve the stability and efficiency of photoelectrochemical water splitting systems. Combined with current density-voltage measurements, the technique quantifies the overpotential for proton reduction relative to its thermodynamic potential in Si photocathodes coated with three oxides (SiOx, TiO2, and Al2O3) and a Pt catalyst. In pH 7 electrolyte, the flatband potentials of TiO2- and Al2O3-coated Si electrodes are negative relative to samples with native SiOx, indicating that SiOx is a better protective layer against oxidative electrochemical corrosion than ALD-deposited crystalline TiO2 or Al2O3. Adding a Pt catalyst to SiOx/Si minimizes proton reduction overpotential losses but at the expense of a reduction in available energy characterized by a more negative flatband potential relative to catalyst-free SiOx/Si.

Analgesic Efficacy of a New Immediate-Release/Extended-Release Formulation of Ibuprofen: Results From Single- and Multiple-Dose Postsurgical Dental Pain Studies.

Analgesic effects of ibuprofen immediate-release/extended-release (IR/ER) 600-mg tablets were evaluated in 2 randomized, double-blind, placebo-controlled dental pain studies. Patients 16-40 years old with moderate-severe pain following third-molar extraction received single-dose ibuprofen 600 mg IR/ER (formulation A or B), naproxen sodium 220 mg, or placebo (2:2:2:1; study 1) or 4 doses of ibuprofen 600 mg IR/ER (formulation A) or placebo (1:1; study 2). In study 1 (n = 196), mean (standard deviation [SD]) time-weighted sum of pain intensity difference scores for placebo, ibuprofen IR/ER A, ibuprofen IR/ER B, and naproxen, respectively, were 0.05 (9.2), 16.87 (9.4), 17.34 (10.5), and 12.66 (10.0) over 0-12 hours and -0.03 (4.1), 6.57 (4.4), 7.14 (5.2), and 5.14 (5.0) over 8-12 hours (all P < .001 vs placebo). In study 2 (n = 106), mean (SD) time-weighted sum of pain relief and pain intensity difference scores were 18.2 (20.0) versus 41.5 (21.0) at 0-12 hours and 10.3 (12.0) versus 18.4 (12.1) at 8-12 hours for placebo versus ibuprofen IR/ER, respectively (P < .001 for both); efficacy was sustained over each of the four 12-hour dosing intervals with ibuprofen. Gastrointestinal adverse events predominated with placebo both after study medication administration and after rescue medication use, if applicable. Ibuprofen 600 mg IR/ER provided safe and effective analgesia after single and multiple doses.

Understanding and Control of Bipolar Self-Doping in Copper Nitride.

Semiconductor materials that can be doped both n-type and p-type are desirable for diode-based applications and transistor technology. Copper nitride (Cu3N) is a metastable semiconductor with a solar-relevant bandgap that has been reported to exhibit bipolar doping behavior. However, deeper understanding and better control of the mechanism behind this behavior in Cu3N is currently lacking in the literature. In this work, we use combinatorial growth with a temperature gradient to demonstrate both conduction types of phase-pure, sputter-deposited Cu3N thin films. Room temperature Hall effect and Seebeck effect measurements show n-type Cu3N with an electron density of 1017 cm-3 for low growth temperature (≈ 35 °C) and p-type with a hole density between 1015 cm-3 and 1016 cm-3 for elevated growth temperatures (50 °C to 120 °C). Mobility for both types of Cu3N was ≈ 0.1 cm2/Vs to 1 cm2/V. Additionally, temperature-dependent Hall effect measurements indicate that ionized defects are an important scattering mechanism in p-type films. By combining X-ray absorption spectroscopy and first-principles defect theory, we determined that VCu defects form preferentially in p-type Cu3N while Cui defects form preferentially in n-type Cu3N; suggesting that Cu3N is a compensated semiconductor with conductivity type resulting from a balance between donor and acceptor defects. Based on these theoretical and experimental results, we propose a kinetic defect formation mechanism for bipolar doping in Cu3N, that is also supported by positron annihilation experiments. Overall, the results of this work highlight the importance of kinetic processes in the defect physics of metastable materials, and provide a framework that can be applied when considering the properties of such materials in general.

Synthesis of a mixed-valent tin nitride and considerations of its possible crystal structures.

Recent advances in theoretical structure prediction methods and high-throughput computational techniques are revolutionizing experimental discovery of the thermodynamically stable inorganic materials. Metastable materials represent a new frontier for these studies, since even simple binary non-ground state compounds of common elements may be awaiting discovery. However, there are significant research challenges related to non-equilibrium thin film synthesis and crystal structure predictions, such as small strained crystals in the experimental samples and energy minimization based theoretical algorithms. Here, we report on experimental synthesis and characterization, as well as theoretical first-principles calculations of a previously unreported mixed-valent binary tin nitride. Thin film experiments indicate that this novel material is N-deficient SnN with tin in the mixed ii/iv valence state and a small low-symmetry unit cell. Theoretical calculations suggest that the most likely crystal structure has the space group 2 (SG2) related to the distorted delafossite (SG166), which is nearly 0.1 eV/atom above the ground state SnN polymorph. This observation is rationalized by the structural similarity of the SnN distorted delafossite to the chemically related Sn3N4 spinel compound, which provides a fresh scientific insight into the reasons for growth of polymorphs of metastable materials. In addition to reporting on the discovery of the simple binary SnN compound, this paper illustrates a possible way of combining a wide range of advanced characterization techniques with the first-principle property calculation methods, to elucidate the most likely crystal structure of the previously unreported metastable materials.

Use of a website to accomplish health behavior change: if you build it, will they come? And will it work if they do?

PURPOSE: This article describes the development, implementation, and effectiveness of 2 interactive websites designed to support health behavior change around healthy eating, physical activity, smoking, and use of alcohol for primary care patients. METHODS: Patients from 6 primary care practices were recruited and randomized to a basic website (including a health assessment with feedback of the results and educational materials about health behavior change) or an enhanced website that included the features of the basic site plus an action planning component. Patients were prompted to return for follow-up assessments at 3 and 6 months after enrollment. RESULTS: Of 7706 participants, 169 (2.2%) targeted for recruitment actually used the website. Both web-based interventions seemed to assist patients with making positive changes in their behavior, especially activity level and healthful diet. There were no significant differences in the effectiveness of the basic and enhanced websites. CONCLUSIONS: Interactive behavior-change technology interventions can assist primary care patients and practices in health behavior change activities. Difficulties with patient recruitment and the lack of added effectiveness of the enhanced website suggest that such interventions work better if integrated into the interaction between primary care clinicians and patients rather than as a standalone intervention.

Effect of halide-modified model carbon supports on catalyst stability.

Modification of physiochemical and structural properties of carbon-based materials through targeted functionalization is a useful way to improve the properties and performance of such catalyst materials. This work explores the incorporation of dopants, including nitrogen, iodine, and fluorine, into the carbon structure of highly-oriented pyrolytic graphite (HOPG) and its potential benefits on the stability of PtRu catalyst nanoparticles. Evaluation of the changes in the catalyst nanoparticle coverage and size as a function of implantation parameters reveals that carbon supports functionalized with a combination of nitrogen and fluorine provide the most beneficial interactions, resulting in suppressed particle coarsening and dissolution. Benefits of a carefully tuned support system modified with fluorine and nitrogen surpass those obtained with nitrogen (no fluorine) modification. Ion implantation of iodine into HOPG results in a consistent amount of structural damage to the carbon matrix, regardless of dose. For this modification, improvements in stability are similar to nitrogen modification; however, the benefit is only observed at higher dose conditions. This indicates that a mechanism different than the one associated with nitrogen may be responsible for the improved durability.

Knee simulator wear of vitamin E stabilized irradiated ultrahigh molecular weight polyethylene.

Wear and damage of ultrahigh molecular weight polyethylene (UHMWPE) tibial inserts used in total knee arthroplasty are accelerated by oxidation. Radiation crosslinking reduces wear but produces residual free radicals adversely affecting stability. One alternative to stabilize radiation-crosslinked UHMWPE is to infuse the material with vitamin E (vit E). We investigated the properties of 100-kGy e-beam-irradiated UHMWPE that was subsequently doped with vitamin E in comparison with conventional UHMWPE. Both polymers were sterilized with gamma irradiation in vacuum packaging. Vitamin E-doped UHMWPE showed lower wear before and after aging (2.4 ± 0.5 and 2.5 ± 0.8 mg/million cycle, respectively, vs 26.9 ± 3.5 and 40.8 ± 3.0 mg/million cycle for conventional UHMWPE). Conventional UHMWPE showed oxidation after accelerated aging, and its mechanical properties were adversely affected, whereas vit E-doped UHMWPE showed no oxidation or changes in its mechanical properties. Vitamin E stabilization of radiation-crosslinked UHMWPE resulted in low wear and high oxidation resistance; it is an alternative load-bearing material for total knee applications.

Evaluation of the dose range of etoricoxib in an acute pain setting using the postoperative dental pain model.

OBJECTIVE: This study was conducted to evaluate the dose range of etoricoxib in acute pain using the postoperative dental pain model further. METHODS: This double-blind, randomized controlled study evaluated etoricoxib (90 and 120 mg), ibuprofen (600 mg), and acetaminophen (600 mg/codeine) (60 mg, (A/C)) in patients aged ≥ 18 years with moderate or severe pain after surgical extraction of ≥ 2 third molars (≥ 1 impacted). The patients reported pain intensity and pain relief over 24 hours. The primary efficacy endpoint was total pain relief over 6 hours (TOPAR6). Adverse events were evaluated throughout the study. RESULTS: There were 588 patients randomized to placebo (n=46),etoricoxib (90 mg (n=191)), etoricoxib (120 mg (n=97)), ibuprofen(2400 mg (n=192)), and A/C (n=62). The overall analgesic effect (TOPAR6) of etoricoxib (90, 120 mg) was significantly greater than that of placebo (P ≤ 0.001), and not inferior to that of ibuprofen; no discernible difference was observed between etoricoxib 90 and 120 mg. Both etoricoxib doses were superior to A/C (P ≤ 0.001). Etoricoxib (90 and 120 mg) and ibuprofen(2400 mg) were generally well tolerated and had a similar incidence of adverse events (AEs). A/C was associated with significantly more AEs that led to discontinuation (ie, nausea and vomiting). CONCLUSIONS: Etoricoxib (90 and 120 mg) showed similar efficacy in the postoperative dental pain model, which was noninferior to ibuprofen and superior to A/C. A higher number of tooth extractions or a higher mean impaction score may have led to a greater separation in efficacy between the 2 etoricoxib doses.

Controlled phase III clinical trial of diclofenac potassium liquid-filled soft gelatin capsule for treatment of postoperative dental pain.

PURPOSE: The purpose of the present study was to assess the safety and efficacy of oral diclofenac potassium liquid-filled soft gelatin capsule (DPSGC) that uses ProSorb dispersion technology (Xanodyne Pharmaceuticals, Inc, licensed from AAIPharma, Wilmington, NC), to treat adult patients with acute pain after third molar extraction. PATIENTS AND METHODS: In the present multicenter, randomized, double-blind, placebo-controlled trial, patients experiencing a baseline level of pain (≥ 50 mm on a 100-mm visual analog scale within 4 hours after surgery) were randomized to receive a single dose of DPSGC at 25, 50, or 100 mg or placebo. Pain intensity and relief were assessed for 6 hours after dosing. The efficacy endpoints included the summed pain intensity difference, total pain relief, and the median time to the onset of perceptible and meaningful pain relief (using the 2-stopwatch method). RESULTS: A total of 249 randomized patients had a significant increase in the summed pain intensity difference and total pain relief values at 3 and 6 hours across all DPSGC-treated groups compared with the placebo group (P < .0001). The onset of perceptible and meaningful pain relief was significantly faster in all DPSGC groups than in the placebo group, including the DPSGC 25-mg group (25 minutes [P = .0002] and 52 minutes [P < .0001] for perceptible and meaningful pain relief, respectively). Significantly fewer patients in the DPSGC groups required rescue medication compared with those in the placebo group (P < .0001). The global evaluation scores were significantly greater for the patients who received DPSGC than for those who received placebo (P < .0001), and more than 65% of DPSGC-treated patients rated the medication as good, very good, or excellent compared with 18% of the placebo-treated patients. DPSGC was generally well tolerated, and no serious adverse events were reported. CONCLUSIONS: The results from the present single-dose study of postoperative dental pain suggest that DPSGC offers significant pain relief compared with placebo and that the study medication provided was well tolerated by patients who required pain relief after third molar extraction.

Supported ru-pt bimetallic nanoparticle catalysts prepared by atomic layer deposition.

Atomic layer deposition (ALD) is used to deposit ruthenium-platinum nanostructured catalysts using 2,4-(dimethylpentadienyl)(ethylcyclopentadienyl) ruthenium, trimethyl(methylcyclopentadienyl) platinum, and oxygen as precursors. Transmission electron microscopy shows discrete 1.2 nm nanoparticles decorating the surface of the spherical alumina support. The Ru-Pt particles are crystalline and have a crystal structure similar to pure platinum. X-ray fluorescence measurements show that the nanoparticle composition is controlled by the ratio of metal precursor ALD cycles. X-ray absorption spectroscopy at the Ru K-edge indicates a nearest neighbor Ru-Pt interaction consistent with a bimetallic composition. Methanol decomposition reactions further confirm a Ru-Pt interaction and show enhanced methanol conversion for the bimetallic nanoparticles when compared to catalysts comprised of a mixture of pure Pt and Ru nanoparticles of similar loading. These results demonstrate that ALD is a viable technique for synthesizing mixed-metal nanostructures suitable for catalysis and other applications.

Delamination and adhesive wear behavior of alpha-tocopherol-stabilized irradiated ultrahigh-molecular-weight polyethylene.

Wear and delamination of conventional ultrahigh-molecular-weight polyethylene (UHMWPE) components used in total knee arthroplasty can compromise long-term performance. Radiation cross-linking and melt-annealing reduced wear and increased delamination resistance of UHMWPE. An alternative material is the alpha-tocopherol-stabilized irradiated UHMWPE (alphaTPE), with improved mechanical and fatigue properties vs irradiated and melted UHMWPE. We studied the wear and delamination resistance of alphaTPE and conventional UHMWPE (direct compression molded GUR 1050 and Himont 1900) under reciprocating unidirectional motion. Wear resistance was improved, and no delamination was observed in alphaTPE. Accelerated aging did not alter the wear and delamination behavior of alphaTPE. The GUR 1050 UHMWPE showed delamination and pitting when subjected to unidirectional reciprocating motion after accelerated aging. Himont 1900 UHMWPE showed no delamination when subjected to unidirectional reciprocating motion after accelerated aging. alpha-Tocopherol-stabilized irradiated UHMWPE is advanced for use in total knee arthroplasty due to its high resistance to wear, delamination, and oxidation.

Controlled growth of platinum nanoparticles on strontium titanate nanocubes by atomic layer deposition.

With an eye toward using surface morphology to enhance heterogeneous catalysis, Pt nanoparticles are grown by atomic layer deposition (ALD) on the surfaces of SrTiO(3) nanocubes. The size, dispersion, and chemical state of the Pt nanoparticles are controlled by the number of ALD growth cycles. The SrTiO(3) nanocubes average 60 nm on a side with {001} faces. The Pt loading increases linearly with Pt ALD cycles to a value of 1.1 x 10(-6) g cm(-2) after five cycles. Scanning electron microscopy images reveal discrete, well-dispersed Pt nanoparticles. Small- and wide-angle X-ray scattering show that the Pt nanoparticle spacing and size increase as the number of ALD cycles increases. X-ray absorption spectroscopy shows a progression from platinum(II) oxide to metallic platinum and a decrease in Pt--O bonding with an increase in Pt--Pt bonding as the number of ALD cycles increases.